octeontx2-pf: Add TC feature for VFs

This patch adds TC feature for VFs also. When MCAM
rules are allocated for a VF then either TC or ntuple
filters can be used. Below are the commands to use
TC feature for a VF(say lbk0):

devlink dev param set pci/0002:01:00.1 name mcam_count value 16 \
 cmode runtime
ethtool -K lbk0 hw-tc-offload on
ifconfig lbk0 up
tc qdisc add dev lbk0 ingress
tc filter add dev lbk0 parent ffff: protocol ip flower skip_sw \
 dst_mac 98:03:9b:83:aa:12 action police rate 100Mbit burst 5000

Also to modify any fields of the hardware context with
NIX_AQ_INSTOP_WRITE command then corresponding masks of those
fields must be set as per hardware. This was missing in
ingress ratelimiting context. This patch sets those masks also.

Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 50 insertions, 0 deletions

diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c
index 358e5b216698..2c9760814bc3 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c
@@ -1727,6 +1727,56 @@ out:
 }
 EXPORT_SYMBOL(otx2_get_max_mtu);
 
+int otx2_handle_ntuple_tc_features(struct net_device *netdev, netdev_features_t features)
+{
+	netdev_features_t changed = features ^ netdev->features;
+	struct otx2_nic *pfvf = netdev_priv(netdev);
+	bool ntuple = !!(features & NETIF_F_NTUPLE);
+	bool tc = !!(features & NETIF_F_HW_TC);
+
+	if ((changed & NETIF_F_NTUPLE) && !ntuple)
+		otx2_destroy_ntuple_flows(pfvf);
+
+	if ((changed & NETIF_F_NTUPLE) && ntuple) {
+		if (!pfvf->flow_cfg->max_flows) {
+			netdev_err(netdev,
+				   "Can't enable NTUPLE, MCAM entries not allocated\n");
+			return -EINVAL;
+		}
+	}
+
+	if ((changed & NETIF_F_HW_TC) && tc) {
+		if (!pfvf->flow_cfg->max_flows) {
+			netdev_err(netdev,
+				   "Can't enable TC, MCAM entries not allocated\n");
+			return -EINVAL;
+		}
+	}
+
+	if ((changed & NETIF_F_HW_TC) && !tc &&
+	    pfvf->flow_cfg && pfvf->flow_cfg->nr_flows) {
+		netdev_err(netdev, "Can't disable TC hardware offload while flows are active\n");
+		return -EBUSY;
+	}
+
+	if ((changed & NETIF_F_NTUPLE) && ntuple &&
+	    (netdev->features & NETIF_F_HW_TC) && !(changed & NETIF_F_HW_TC)) {
+		netdev_err(netdev,
+			   "Can't enable NTUPLE when TC is active, disable TC and retry\n");
+		return -EINVAL;
+	}
+
+	if ((changed & NETIF_F_HW_TC) && tc &&
+	    (netdev->features & NETIF_F_NTUPLE) && !(changed & NETIF_F_NTUPLE)) {
+		netdev_err(netdev,
+			   "Can't enable TC when NTUPLE is active, disable NTUPLE and retry\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(otx2_handle_ntuple_tc_features);
+
 #define M(_name, _id, _fn_name, _req_type, _rsp_type)			\
 int __weak								\
 otx2_mbox_up_handler_ ## _fn_name(struct otx2_nic *pfvf,		\