qed: Revise load sequence to avoid PCI errors

Initiating final cleanup after an ungraceful driver unload can lead to bad
PCI accesses towards the host.
This patch revises the load sequence so final cleanup is sent while the
internal master enable is cleared, to prevent the host accesses, and clears
the internal error indications just before enabling the internal master
enable.

Signed-off-by: Tomer Tayar <tomer.tayar@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 21 insertions, 0 deletions

diff --git a/drivers/net/ethernet/qlogic/qed/qed_mcp.c b/drivers/net/ethernet/qlogic/qed/qed_mcp.c
index e7f18e34ff0d..1024484d7dd8 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_mcp.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_mcp.c
@@ -1070,6 +1070,27 @@ int qed_mcp_load_req(struct qed_hwfn *p_hwfn,
 	return 0;
 }
 
+int qed_mcp_load_done(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt)
+{
+	u32 resp = 0, param = 0;
+	int rc;
+
+	rc = qed_mcp_cmd(p_hwfn, p_ptt, DRV_MSG_CODE_LOAD_DONE, 0, &resp,
+			 &param);
+	if (rc) {
+		DP_NOTICE(p_hwfn,
+			  "Failed to send a LOAD_DONE command, rc = %d\n", rc);
+		return rc;
+	}
+
+	/* Check if there is a DID mismatch between nvm-cfg/efuse */
+	if (param & FW_MB_PARAM_LOAD_DONE_DID_EFUSE_ERROR)
+		DP_NOTICE(p_hwfn,
+			  "warning: device configuration is not supported on this board type. The device may not function as expected.\n");
+
+	return 0;
+}
+
 int qed_mcp_unload_req(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt)
 {
 	struct qed_mcp_mb_params mb_params;