sfc: move some MCDI port utility functions

They just convert between different sets of flags/registers.
Some block comments were adjusted.

Signed-off-by: Alexandru-Mihai Maftei <amaftei@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 148 insertions, 0 deletions

diff --git a/drivers/net/ethernet/sfc/mcdi_port_common.c b/drivers/net/ethernet/sfc/mcdi_port_common.c
index 0ba7b5a47d99..9763d59f7681 100644
--- a/drivers/net/ethernet/sfc/mcdi_port_common.c
+++ b/drivers/net/ethernet/sfc/mcdi_port_common.c
@@ -173,6 +173,96 @@ void mcdi_to_ethtool_linkset(u32 media, u32 cap, unsigned long *linkset)
 	#undef SET_BIT
 }
 
+u32 ethtool_linkset_to_mcdi_cap(const unsigned long *linkset)
+{
+	u32 result = 0;
+
+	#define TEST_BIT(name)	test_bit(ETHTOOL_LINK_MODE_ ## name ## _BIT, \
+					 linkset)
+
+	if (TEST_BIT(10baseT_Half))
+		result |= (1 << MC_CMD_PHY_CAP_10HDX_LBN);
+	if (TEST_BIT(10baseT_Full))
+		result |= (1 << MC_CMD_PHY_CAP_10FDX_LBN);
+	if (TEST_BIT(100baseT_Half))
+		result |= (1 << MC_CMD_PHY_CAP_100HDX_LBN);
+	if (TEST_BIT(100baseT_Full))
+		result |= (1 << MC_CMD_PHY_CAP_100FDX_LBN);
+	if (TEST_BIT(1000baseT_Half))
+		result |= (1 << MC_CMD_PHY_CAP_1000HDX_LBN);
+	if (TEST_BIT(1000baseT_Full) || TEST_BIT(1000baseKX_Full))
+		result |= (1 << MC_CMD_PHY_CAP_1000FDX_LBN);
+	if (TEST_BIT(10000baseT_Full) || TEST_BIT(10000baseKX4_Full))
+		result |= (1 << MC_CMD_PHY_CAP_10000FDX_LBN);
+	if (TEST_BIT(40000baseCR4_Full) || TEST_BIT(40000baseKR4_Full))
+		result |= (1 << MC_CMD_PHY_CAP_40000FDX_LBN);
+	if (TEST_BIT(100000baseCR4_Full))
+		result |= (1 << MC_CMD_PHY_CAP_100000FDX_LBN);
+	if (TEST_BIT(25000baseCR_Full))
+		result |= (1 << MC_CMD_PHY_CAP_25000FDX_LBN);
+	if (TEST_BIT(50000baseCR2_Full))
+		result |= (1 << MC_CMD_PHY_CAP_50000FDX_LBN);
+	if (TEST_BIT(Pause))
+		result |= (1 << MC_CMD_PHY_CAP_PAUSE_LBN);
+	if (TEST_BIT(Asym_Pause))
+		result |= (1 << MC_CMD_PHY_CAP_ASYM_LBN);
+	if (TEST_BIT(Autoneg))
+		result |= (1 << MC_CMD_PHY_CAP_AN_LBN);
+
+	#undef TEST_BIT
+
+	return result;
+}
+
+u32 efx_get_mcdi_phy_flags(struct efx_nic *efx)
+{
+	struct efx_mcdi_phy_data *phy_cfg = efx->phy_data;
+	enum efx_phy_mode mode, supported;
+	u32 flags;
+
+	/* TODO: Advertise the capabilities supported by this PHY */
+	supported = 0;
+	if (phy_cfg->flags & (1 << MC_CMD_GET_PHY_CFG_OUT_TXDIS_LBN))
+		supported |= PHY_MODE_TX_DISABLED;
+	if (phy_cfg->flags & (1 << MC_CMD_GET_PHY_CFG_OUT_LOWPOWER_LBN))
+		supported |= PHY_MODE_LOW_POWER;
+	if (phy_cfg->flags & (1 << MC_CMD_GET_PHY_CFG_OUT_POWEROFF_LBN))
+		supported |= PHY_MODE_OFF;
+
+	mode = efx->phy_mode & supported;
+
+	flags = 0;
+	if (mode & PHY_MODE_TX_DISABLED)
+		flags |= (1 << MC_CMD_SET_LINK_IN_TXDIS_LBN);
+	if (mode & PHY_MODE_LOW_POWER)
+		flags |= (1 << MC_CMD_SET_LINK_IN_LOWPOWER_LBN);
+	if (mode & PHY_MODE_OFF)
+		flags |= (1 << MC_CMD_SET_LINK_IN_POWEROFF_LBN);
+
+	return flags;
+}
+
+u8 mcdi_to_ethtool_media(u32 media)
+{
+	switch (media) {
+	case MC_CMD_MEDIA_XAUI:
+	case MC_CMD_MEDIA_CX4:
+	case MC_CMD_MEDIA_KX4:
+		return PORT_OTHER;
+
+	case MC_CMD_MEDIA_XFP:
+	case MC_CMD_MEDIA_SFP_PLUS:
+	case MC_CMD_MEDIA_QSFP_PLUS:
+		return PORT_FIBRE;
+
+	case MC_CMD_MEDIA_BASE_T:
+		return PORT_TP;
+
+	default:
+		return PORT_OTHER;
+	}
+}
+
 void efx_mcdi_phy_decode_link(struct efx_nic *efx,
 			      struct efx_link_state *link_state,
 			      u32 speed, u32 flags, u32 fcntl)
@@ -200,3 +290,61 @@ void efx_mcdi_phy_decode_link(struct efx_nic *efx,
 	link_state->fd = !!(flags & (1 << MC_CMD_GET_LINK_OUT_FULL_DUPLEX_LBN));
 	link_state->speed = speed;
 }
+
+/* The semantics of the ethtool FEC mode bitmask are not well defined,
+ * particularly the meaning of combinations of bits.  Which means we get to
+ * define our own semantics, as follows:
+ * OFF overrides any other bits, and means "disable all FEC" (with the
+ * exception of 25G KR4/CR4, where it is not possible to reject it if AN
+ * partner requests it).
+ * AUTO on its own means use cable requirements and link partner autoneg with
+ * fw-default preferences for the cable type.
+ * AUTO and either RS or BASER means use the specified FEC type if cable and
+ * link partner support it, otherwise autoneg/fw-default.
+ * RS or BASER alone means use the specified FEC type if cable and link partner
+ * support it and either requests it, otherwise no FEC.
+ * Both RS and BASER (whether AUTO or not) means use FEC if cable and link
+ * partner support it, preferring RS to BASER.
+ */
+u32 ethtool_fec_caps_to_mcdi(u32 ethtool_cap)
+{
+	u32 ret = 0;
+
+	if (ethtool_cap & ETHTOOL_FEC_OFF)
+		return 0;
+
+	if (ethtool_cap & ETHTOOL_FEC_AUTO)
+		ret |= (1 << MC_CMD_PHY_CAP_BASER_FEC_LBN) |
+		       (1 << MC_CMD_PHY_CAP_25G_BASER_FEC_LBN) |
+		       (1 << MC_CMD_PHY_CAP_RS_FEC_LBN);
+	if (ethtool_cap & ETHTOOL_FEC_RS)
+		ret |= (1 << MC_CMD_PHY_CAP_RS_FEC_LBN) |
+		       (1 << MC_CMD_PHY_CAP_RS_FEC_REQUESTED_LBN);
+	if (ethtool_cap & ETHTOOL_FEC_BASER)
+		ret |= (1 << MC_CMD_PHY_CAP_BASER_FEC_LBN) |
+		       (1 << MC_CMD_PHY_CAP_25G_BASER_FEC_LBN) |
+		       (1 << MC_CMD_PHY_CAP_BASER_FEC_REQUESTED_LBN) |
+		       (1 << MC_CMD_PHY_CAP_25G_BASER_FEC_REQUESTED_LBN);
+	return ret;
+}
+
+/* Invert ethtool_fec_caps_to_mcdi.  There are two combinations that function
+ * can never produce, (baser xor rs) and neither req; the implementation below
+ * maps both of those to AUTO.  This should never matter, and it's not clear
+ * what a better mapping would be anyway.
+ */
+u32 mcdi_fec_caps_to_ethtool(u32 caps, bool is_25g)
+{
+	bool rs = caps & (1 << MC_CMD_PHY_CAP_RS_FEC_LBN),
+	     rs_req = caps & (1 << MC_CMD_PHY_CAP_RS_FEC_REQUESTED_LBN),
+	     baser = is_25g ? caps & (1 << MC_CMD_PHY_CAP_25G_BASER_FEC_LBN)
+			    : caps & (1 << MC_CMD_PHY_CAP_BASER_FEC_LBN),
+	     baser_req = is_25g ? caps & (1 << MC_CMD_PHY_CAP_25G_BASER_FEC_REQUESTED_LBN)
+				: caps & (1 << MC_CMD_PHY_CAP_BASER_FEC_REQUESTED_LBN);
+
+	if (!baser && !rs)
+		return ETHTOOL_FEC_OFF;
+	return (rs_req ? ETHTOOL_FEC_RS : 0) |
+	       (baser_req ? ETHTOOL_FEC_BASER : 0) |
+	       (baser == baser_req && rs == rs_req ? 0 : ETHTOOL_FEC_AUTO);
+}