summaryrefslogtreecommitdiff
path: root/drivers/net/gianfar.c
diff options
context:
space:
mode:
authorAnton Vorontsov <avorontsov@mvista.com>2010-06-30 10:39:12 +0400
committerDavid S. Miller <davem@davemloft.net>2010-06-30 22:35:42 +0400
commit7d3509774c2ef4ffd1c5fd2fac65dc4e071a6f21 (patch)
tree54d32c6f6f6c72fee208ab8dea9879697b613765 /drivers/net/gianfar.c
parent70777d03466e7a8a41b0d34677454c92f4e93d89 (diff)
downloadlinux-7d3509774c2ef4ffd1c5fd2fac65dc4e071a6f21.tar.xz
gianfar: Implement workaround for eTSEC74 erratum
MPC8313ECE says: "If MACCFG2[Huge Frame]=0 and the Ethernet controller receives frames which are larger than MAXFRM, the controller truncates the frames to length MAXFRM and marks RxBD[TR]=1 to indicate the error. The controller also erroneously marks RxBD[TR]=1 if the received frame length is MAXFRM or MAXFRM-1, even though those frames are not truncated. No truncation or truncation error occurs if MACCFG2[Huge Frame]=1." There are two options to workaround the issue: "1. Set MACCFG2[Huge Frame]=1, so no truncation occurs for invalid large frames. Software can determine if a frame is larger than MAXFRM by reading RxBD[LG] or RxBD[Data Length]. 2. Set MAXFRM to 1538 (0x602) instead of the default 1536 (0x600), so normal-length frames are not marked as truncated. Software can examine RxBD[Data Length] to determine if the frame was larger than MAXFRM-2." This patch implements the first workaround option by setting HUGEFRAME bit, and gfar_clean_rx_ring() already checks the RxBD[Data Length]. Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/gianfar.c')
-rw-r--r--drivers/net/gianfar.c29
1 files changed, 27 insertions, 2 deletions
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index c52f3712ecd3..cee8ae714731 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -85,6 +85,7 @@
#include <linux/net_tstamp.h>
#include <asm/io.h>
+#include <asm/reg.h>
#include <asm/irq.h>
#include <asm/uaccess.h>
#include <linux/module.h>
@@ -928,6 +929,24 @@ static void gfar_init_filer_table(struct gfar_private *priv)
}
}
+static void gfar_detect_errata(struct gfar_private *priv)
+{
+ struct device *dev = &priv->ofdev->dev;
+ unsigned int pvr = mfspr(SPRN_PVR);
+ unsigned int svr = mfspr(SPRN_SVR);
+ unsigned int mod = (svr >> 16) & 0xfff6; /* w/o E suffix */
+ unsigned int rev = svr & 0xffff;
+
+ /* MPC8313 Rev 2.0 and higher; All MPC837x */
+ if ((pvr == 0x80850010 && mod == 0x80b0 && rev >= 0x0020) ||
+ (pvr == 0x80861010 && (mod & 0xfff9) == 0x80c0))
+ priv->errata |= GFAR_ERRATA_74;
+
+ if (priv->errata)
+ dev_info(dev, "enabled errata workarounds, flags: 0x%x\n",
+ priv->errata);
+}
+
/* Set up the ethernet device structure, private data,
* and anything else we need before we start */
static int gfar_probe(struct of_device *ofdev,
@@ -960,6 +979,8 @@ static int gfar_probe(struct of_device *ofdev,
dev_set_drvdata(&ofdev->dev, priv);
regs = priv->gfargrp[0].regs;
+ gfar_detect_errata(priv);
+
/* Stop the DMA engine now, in case it was running before */
/* (The firmware could have used it, and left it running). */
gfar_halt(dev);
@@ -974,7 +995,10 @@ static int gfar_probe(struct of_device *ofdev,
gfar_write(&regs->maccfg1, tempval);
/* Initialize MACCFG2. */
- gfar_write(&regs->maccfg2, MACCFG2_INIT_SETTINGS);
+ tempval = MACCFG2_INIT_SETTINGS;
+ if (gfar_has_errata(priv, GFAR_ERRATA_74))
+ tempval |= MACCFG2_HUGEFRAME | MACCFG2_LENGTHCHECK;
+ gfar_write(&regs->maccfg2, tempval);
/* Initialize ECNTRL */
gfar_write(&regs->ecntrl, ECNTRL_INIT_SETTINGS);
@@ -2300,7 +2324,8 @@ static int gfar_change_mtu(struct net_device *dev, int new_mtu)
* to allow huge frames, and to check the length */
tempval = gfar_read(&regs->maccfg2);
- if (priv->rx_buffer_size > DEFAULT_RX_BUFFER_SIZE)
+ if (priv->rx_buffer_size > DEFAULT_RX_BUFFER_SIZE ||
+ gfar_has_errata(priv, GFAR_ERRATA_74))
tempval |= (MACCFG2_HUGEFRAME | MACCFG2_LENGTHCHECK);
else
tempval &= ~(MACCFG2_HUGEFRAME | MACCFG2_LENGTHCHECK);