Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Two minor conflicts:

1) net/ipv4/route.c, adding a new local variable while
   moving another local variable and removing it's
   initial assignment.

2) drivers/net/dsa/microchip/ksz9477.c, overlapping changes.
   One pretty prints the port mode differently, whilst another
   changes the driver to try and obtain the port mode from
   the port node rather than the switch node.

Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 29 insertions, 6 deletions

diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c
index 64b0a74c1523..9869e390875e 100644
--- a/drivers/net/hyperv/netvsc_drv.c
+++ b/drivers/net/hyperv/netvsc_drv.c
@@ -748,6 +748,13 @@ void netvsc_linkstatus_callback(struct net_device *net,
 	struct netvsc_reconfig *event;
 	unsigned long flags;
 
+	/* Ensure the packet is big enough to access its fields */
+	if (resp->msg_len - RNDIS_HEADER_SIZE < sizeof(struct rndis_indicate_status)) {
+		netdev_err(net, "invalid rndis_indicate_status packet, len: %u\n",
+			   resp->msg_len);
+		return;
+	}
+
 	/* Update the physical link speed when changing to another vSwitch */
 	if (indicate->status == RNDIS_STATUS_LINK_SPEED_CHANGE) {
 		u32 speed;
@@ -2366,7 +2373,16 @@ static int netvsc_register_vf(struct net_device *vf_netdev)
 	return NOTIFY_OK;
 }
 
-/* VF up/down change detected, schedule to change data path */
+/* Change the data path when VF UP/DOWN/CHANGE are detected.
+ *
+ * Typically a UP or DOWN event is followed by a CHANGE event, so
+ * net_device_ctx->data_path_is_vf is used to cache the current data path
+ * to avoid the duplicate call of netvsc_switch_datapath() and the duplicate
+ * message.
+ *
+ * During hibernation, if a VF NIC driver (e.g. mlx5) preserves the network
+ * interface, there is only the CHANGE event and no UP or DOWN event.
+ */
 static int netvsc_vf_changed(struct net_device *vf_netdev)
 {
 	struct net_device_context *net_device_ctx;
@@ -2383,6 +2399,10 @@ static int netvsc_vf_changed(struct net_device *vf_netdev)
 	if (!netvsc_dev)
 		return NOTIFY_DONE;
 
+	if (net_device_ctx->data_path_is_vf == vf_is_up)
+		return NOTIFY_OK;
+	net_device_ctx->data_path_is_vf = vf_is_up;
+
 	netvsc_switch_datapath(ndev, vf_is_up);
 	netdev_info(ndev, "Data path switched %s VF: %s\n",
 		    vf_is_up ? "to" : "from", vf_netdev->name);
@@ -2587,8 +2607,8 @@ static int netvsc_remove(struct hv_device *dev)
 static int netvsc_suspend(struct hv_device *dev)
 {
 	struct net_device_context *ndev_ctx;
-	struct net_device *vf_netdev, *net;
 	struct netvsc_device *nvdev;
+	struct net_device *net;
 	int ret;
 
 	net = hv_get_drvdata(dev);
@@ -2604,10 +2624,6 @@ static int netvsc_suspend(struct hv_device *dev)
 		goto out;
 	}
 
-	vf_netdev = rtnl_dereference(ndev_ctx->vf_netdev);
-	if (vf_netdev)
-		netvsc_unregister_vf(vf_netdev);
-
 	/* Save the current config info */
 	ndev_ctx->saved_netvsc_dev_info = netvsc_devinfo_get(nvdev);
 
@@ -2628,6 +2644,12 @@ static int netvsc_resume(struct hv_device *dev)
 	rtnl_lock();
 
 	net_device_ctx = netdev_priv(net);
+
+	/* Reset the data path to the netvsc NIC before re-opening the vmbus
+	 * channel. Later netvsc_netdev_event() will switch the data path to
+	 * the VF upon the UP or CHANGE event.
+	 */
+	net_device_ctx->data_path_is_vf = false;
 	device_info = net_device_ctx->saved_netvsc_dev_info;
 
 	ret = netvsc_attach(net, device_info);
@@ -2695,6 +2717,7 @@ static int netvsc_netdev_event(struct notifier_block *this,
 		return netvsc_unregister_vf(event_dev);
 	case NETDEV_UP:
 	case NETDEV_DOWN:
+	case NETDEV_CHANGE:
 		return netvsc_vf_changed(event_dev);
 	default:
 		return NOTIFY_DONE;