net: mdio: Move MDIO drivers into a new subdirectory

Move all the MDIO drivers and multiplexers into drivers/net/mdio.  The
mdio core is however left in the phy directory, due to mutual
dependencies between the MDIO core and the PHY core.

Take this opportunity to sort the Kconfig based on the menuconfig
strings, and move the multiplexers to the end with a separating
comment.

v2:
Fix typo in commit message

Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 187 insertions, 0 deletions

diff --git a/drivers/net/mdio/mdio-moxart.c b/drivers/net/mdio/mdio-moxart.c
new file mode 100644
index 000000000000..b72c6d185175
--- /dev/null
+++ b/drivers/net/mdio/mdio-moxart.c
@@ -0,0 +1,187 @@
+// SPDX-License-Identifier: GPL-2.0
+/* MOXA ART Ethernet (RTL8201CP) MDIO interface driver
+ *
+ * Copyright (C) 2013 Jonas Jensen <jonas.jensen@gmail.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_address.h>
+#include <linux/of_mdio.h>
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+
+#define REG_PHY_CTRL            0
+#define REG_PHY_WRITE_DATA      4
+
+/* REG_PHY_CTRL */
+#define MIIWR                   BIT(27) /* init write sequence (auto cleared)*/
+#define MIIRD                   BIT(26)
+#define REGAD_MASK              0x3e00000
+#define PHYAD_MASK              0x1f0000
+#define MIIRDATA_MASK           0xffff
+
+/* REG_PHY_WRITE_DATA */
+#define MIIWDATA_MASK           0xffff
+
+struct moxart_mdio_data {
+	void __iomem		*base;
+};
+
+static int moxart_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
+{
+	struct moxart_mdio_data *data = bus->priv;
+	u32 ctrl = 0;
+	unsigned int count = 5;
+
+	dev_dbg(&bus->dev, "%s\n", __func__);
+
+	ctrl |= MIIRD | ((mii_id << 16) & PHYAD_MASK) |
+		((regnum << 21) & REGAD_MASK);
+
+	writel(ctrl, data->base + REG_PHY_CTRL);
+
+	do {
+		ctrl = readl(data->base + REG_PHY_CTRL);
+
+		if (!(ctrl & MIIRD))
+			return ctrl & MIIRDATA_MASK;
+
+		mdelay(10);
+		count--;
+	} while (count > 0);
+
+	dev_dbg(&bus->dev, "%s timed out\n", __func__);
+
+	return -ETIMEDOUT;
+}
+
+static int moxart_mdio_write(struct mii_bus *bus, int mii_id,
+			     int regnum, u16 value)
+{
+	struct moxart_mdio_data *data = bus->priv;
+	u32 ctrl = 0;
+	unsigned int count = 5;
+
+	dev_dbg(&bus->dev, "%s\n", __func__);
+
+	ctrl |= MIIWR | ((mii_id << 16) & PHYAD_MASK) |
+		((regnum << 21) & REGAD_MASK);
+
+	value &= MIIWDATA_MASK;
+
+	writel(value, data->base + REG_PHY_WRITE_DATA);
+	writel(ctrl, data->base + REG_PHY_CTRL);
+
+	do {
+		ctrl = readl(data->base + REG_PHY_CTRL);
+
+		if (!(ctrl & MIIWR))
+			return 0;
+
+		mdelay(10);
+		count--;
+	} while (count > 0);
+
+	dev_dbg(&bus->dev, "%s timed out\n", __func__);
+
+	return -ETIMEDOUT;
+}
+
+static int moxart_mdio_reset(struct mii_bus *bus)
+{
+	int data, i;
+
+	for (i = 0; i < PHY_MAX_ADDR; i++) {
+		data = moxart_mdio_read(bus, i, MII_BMCR);
+		if (data < 0)
+			continue;
+
+		data |= BMCR_RESET;
+		if (moxart_mdio_write(bus, i, MII_BMCR, data) < 0)
+			continue;
+	}
+
+	return 0;
+}
+
+static int moxart_mdio_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct mii_bus *bus;
+	struct moxart_mdio_data *data;
+	int ret, i;
+
+	bus = mdiobus_alloc_size(sizeof(*data));
+	if (!bus)
+		return -ENOMEM;
+
+	bus->name = "MOXA ART Ethernet MII";
+	bus->read = &moxart_mdio_read;
+	bus->write = &moxart_mdio_write;
+	bus->reset = &moxart_mdio_reset;
+	snprintf(bus->id, MII_BUS_ID_SIZE, "%s-%d-mii", pdev->name, pdev->id);
+	bus->parent = &pdev->dev;
+
+	/* Setting PHY_IGNORE_INTERRUPT here even if it has no effect,
+	 * of_mdiobus_register() sets these PHY_POLL.
+	 * Ideally, the interrupt from MAC controller could be used to
+	 * detect link state changes, not polling, i.e. if there was
+	 * a way phy_driver could set PHY_HAS_INTERRUPT but have that
+	 * interrupt handled in ethernet drivercode.
+	 */
+	for (i = 0; i < PHY_MAX_ADDR; i++)
+		bus->irq[i] = PHY_IGNORE_INTERRUPT;
+
+	data = bus->priv;
+	data->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(data->base)) {
+		ret = PTR_ERR(data->base);
+		goto err_out_free_mdiobus;
+	}
+
+	ret = of_mdiobus_register(bus, np);
+	if (ret < 0)
+		goto err_out_free_mdiobus;
+
+	platform_set_drvdata(pdev, bus);
+
+	return 0;
+
+err_out_free_mdiobus:
+	mdiobus_free(bus);
+	return ret;
+}
+
+static int moxart_mdio_remove(struct platform_device *pdev)
+{
+	struct mii_bus *bus = platform_get_drvdata(pdev);
+
+	mdiobus_unregister(bus);
+	mdiobus_free(bus);
+
+	return 0;
+}
+
+static const struct of_device_id moxart_mdio_dt_ids[] = {
+	{ .compatible = "moxa,moxart-mdio" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, moxart_mdio_dt_ids);
+
+static struct platform_driver moxart_mdio_driver = {
+	.probe = moxart_mdio_probe,
+	.remove = moxart_mdio_remove,
+	.driver = {
+		.name = "moxart-mdio",
+		.of_match_table = moxart_mdio_dt_ids,
+	},
+};
+
+module_platform_driver(moxart_mdio_driver);
+
+MODULE_DESCRIPTION("MOXA ART MDIO interface driver");
+MODULE_AUTHOR("Jonas Jensen <jonas.jensen@gmail.com>");
+MODULE_LICENSE("GPL v2");