Merge tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:

 - Add redirect_neigh() BPF packet redirect helper, allowing to limit
   stack traversal in common container configs and improving TCP
   back-pressure.

   Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain.

 - Expand netlink policy support and improve policy export to user
   space. (Ge)netlink core performs request validation according to
   declared policies. Expand the expressiveness of those policies
   (min/max length and bitmasks). Allow dumping policies for particular
   commands. This is used for feature discovery by user space (instead
   of kernel version parsing or trial and error).

 - Support IGMPv3/MLDv2 multicast listener discovery protocols in
   bridge.

 - Allow more than 255 IPv4 multicast interfaces.

 - Add support for Type of Service (ToS) reflection in SYN/SYN-ACK
   packets of TCPv6.

 - In Multi-patch TCP (MPTCP) support concurrent transmission of data on
   multiple subflows in a load balancing scenario. Enhance advertising
   addresses via the RM_ADDR/ADD_ADDR options.

 - Support SMC-Dv2 version of SMC, which enables multi-subnet
   deployments.

 - Allow more calls to same peer in RxRPC.

 - Support two new Controller Area Network (CAN) protocols - CAN-FD and
   ISO 15765-2:2016.

 - Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit
   kernel problem.

 - Add TC actions for implementing MPLS L2 VPNs.

 - Improve nexthop code - e.g. handle various corner cases when nexthop
   objects are removed from groups better, skip unnecessary
   notifications and make it easier to offload nexthops into HW by
   converting to a blocking notifier.

 - Support adding and consuming TCP header options by BPF programs,
   opening the doors for easy experimental and deployment-specific TCP
   option use.

 - Reorganize TCP congestion control (CC) initialization to simplify
   life of TCP CC implemented in BPF.

 - Add support for shipping BPF programs with the kernel and loading
   them early on boot via the User Mode Driver mechanism, hence reusing
   all the user space infra we have.

 - Support sleepable BPF programs, initially targeting LSM and tracing.

 - Add bpf_d_path() helper for returning full path for given 'struct
   path'.

 - Make bpf_tail_call compatible with bpf-to-bpf calls.

 - Allow BPF programs to call map_update_elem on sockmaps.

 - Add BPF Type Format (BTF) support for type and enum discovery, as
   well as support for using BTF within the kernel itself (current use
   is for pretty printing structures).

 - Support listing and getting information about bpf_links via the bpf
   syscall.

 - Enhance kernel interfaces around NIC firmware update. Allow
   specifying overwrite mask to control if settings etc. are reset
   during update; report expected max time operation may take to users;
   support firmware activation without machine reboot incl. limits of
   how much impact reset may have (e.g. dropping link or not).

 - Extend ethtool configuration interface to report IEEE-standard
   counters, to limit the need for per-vendor logic in user space.

 - Adopt or extend devlink use for debug, monitoring, fw update in many
   drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx,
   dpaa2-eth).

 - In mlxsw expose critical and emergency SFP module temperature alarms.
   Refactor port buffer handling to make the defaults more suitable and
   support setting these values explicitly via the DCBNL interface.

 - Add XDP support for Intel's igb driver.

 - Support offloading TC flower classification and filtering rules to
   mscc_ocelot switches.

 - Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as
   fixed interval period pulse generator and one-step timestamping in
   dpaa-eth.

 - Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3)
   offload.

 - Add Lynx PHY/PCS MDIO module, and convert various drivers which have
   this HW to use it. Convert mvpp2 to split PCS.

 - Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as
   7-port Mediatek MT7531 IP.

 - Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver,
   and wcn3680 support in wcn36xx.

 - Improve performance for packets which don't require much offloads on
   recent Mellanox NICs by 20% by making multiple packets share a
   descriptor entry.

 - Move chelsio inline crypto drivers (for TLS and IPsec) from the
   crypto subtree to drivers/net. Move MDIO drivers out of the phy
   directory.

 - Clean up a lot of W=1 warnings, reportedly the actively developed
   subsections of networking drivers should now build W=1 warning free.

 - Make sure drivers don't use in_interrupt() to dynamically adapt their
   code. Convert tasklets to use new tasklet_setup API (sadly this
   conversion is not yet complete).

* tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits)
  Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH"
  net, sockmap: Don't call bpf_prog_put() on NULL pointer
  bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo
  bpf, sockmap: Add locking annotations to iterator
  netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements
  net: fix pos incrementment in ipv6_route_seq_next
  net/smc: fix invalid return code in smcd_new_buf_create()
  net/smc: fix valid DMBE buffer sizes
  net/smc: fix use-after-free of delayed events
  bpfilter: Fix build error with CONFIG_BPFILTER_UMH
  cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr
  net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info
  bpf: Fix register equivalence tracking.
  rxrpc: Fix loss of final ack on shutdown
  rxrpc: Fix bundle counting for exclusive connections
  netfilter: restore NF_INET_NUMHOOKS
  ibmveth: Identify ingress large send packets.
  ibmveth: Switch order of ibmveth_helper calls.
  cxgb4: handle 4-tuple PEDIT to NAT mode translation
  selftests: Add VRF route leaking tests
  ...

1 files changed, 113 insertions, 13 deletions

diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c
index 74568ae16125..ec97669be5c2 100644
--- a/drivers/net/phy/smsc.c
+++ b/drivers/net/phy/smsc.c
@@ -12,6 +12,7 @@
  *
  */
 
+#include <linux/clk.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/mii.h>
@@ -21,6 +22,17 @@
 #include <linux/netdevice.h>
 #include <linux/smscphy.h>
 
+/* Vendor-specific PHY Definitions */
+/* EDPD NLP / crossover time configuration */
+#define PHY_EDPD_CONFIG			16
+#define PHY_EDPD_CONFIG_EXT_CROSSOVER_	0x0001
+
+/* Control/Status Indication Register */
+#define SPECIAL_CTRL_STS		27
+#define SPECIAL_CTRL_STS_OVRRD_AMDIX_	0x8000
+#define SPECIAL_CTRL_STS_AMDIX_ENABLE_	0x4000
+#define SPECIAL_CTRL_STS_AMDIX_STATE_	0x2000
+
 struct smsc_hw_stat {
 	const char *string;
 	u8 reg;
@@ -33,14 +45,22 @@ static struct smsc_hw_stat smsc_hw_stats[] = {
 
 struct smsc_phy_priv {
 	bool energy_enable;
+	struct clk *refclk;
 };
 
 static int smsc_phy_config_intr(struct phy_device *phydev)
 {
-	int rc = phy_write (phydev, MII_LAN83C185_IM,
-			((PHY_INTERRUPT_ENABLED == phydev->interrupts)
-			? MII_LAN83C185_ISF_INT_PHYLIB_EVENTS
-			: 0));
+	struct smsc_phy_priv *priv = phydev->priv;
+	u16 intmask = 0;
+	int rc;
+
+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+		intmask = MII_LAN83C185_ISF_INT4 | MII_LAN83C185_ISF_INT6;
+		if (priv->energy_enable)
+			intmask |= MII_LAN83C185_ISF_INT7;
+	}
+
+	rc = phy_write(phydev, MII_LAN83C185_IM, intmask);
 
 	return rc < 0 ? rc : 0;
 }
@@ -55,19 +75,21 @@ static int smsc_phy_ack_interrupt(struct phy_device *phydev)
 static int smsc_phy_config_init(struct phy_device *phydev)
 {
 	struct smsc_phy_priv *priv = phydev->priv;
+	int rc;
 
-	int rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
+	if (!priv->energy_enable)
+		return 0;
+
+	rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
 
 	if (rc < 0)
 		return rc;
 
-	if (priv->energy_enable) {
-		/* Enable energy detect mode for this SMSC Transceivers */
-		rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS,
-			       rc | MII_LAN83C185_EDPWRDOWN);
-		if (rc < 0)
-			return rc;
-	}
+	/* Enable energy detect mode for this SMSC Transceivers */
+	rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS,
+		       rc | MII_LAN83C185_EDPWRDOWN);
+	if (rc < 0)
+		return rc;
 
 	return smsc_phy_ack_interrupt(phydev);
 }
@@ -96,6 +118,54 @@ static int lan911x_config_init(struct phy_device *phydev)
 	return smsc_phy_ack_interrupt(phydev);
 }
 
+static int lan87xx_config_aneg(struct phy_device *phydev)
+{
+	int rc;
+	int val;
+
+	switch (phydev->mdix_ctrl) {
+	case ETH_TP_MDI:
+		val = SPECIAL_CTRL_STS_OVRRD_AMDIX_;
+		break;
+	case ETH_TP_MDI_X:
+		val = SPECIAL_CTRL_STS_OVRRD_AMDIX_ |
+			SPECIAL_CTRL_STS_AMDIX_STATE_;
+		break;
+	case ETH_TP_MDI_AUTO:
+		val = SPECIAL_CTRL_STS_AMDIX_ENABLE_;
+		break;
+	default:
+		return genphy_config_aneg(phydev);
+	}
+
+	rc = phy_read(phydev, SPECIAL_CTRL_STS);
+	if (rc < 0)
+		return rc;
+
+	rc &= ~(SPECIAL_CTRL_STS_OVRRD_AMDIX_ |
+		SPECIAL_CTRL_STS_AMDIX_ENABLE_ |
+		SPECIAL_CTRL_STS_AMDIX_STATE_);
+	rc |= val;
+	phy_write(phydev, SPECIAL_CTRL_STS, rc);
+
+	phydev->mdix = phydev->mdix_ctrl;
+	return genphy_config_aneg(phydev);
+}
+
+static int lan87xx_config_aneg_ext(struct phy_device *phydev)
+{
+	int rc;
+
+	/* Extend Manual AutoMDIX timer */
+	rc = phy_read(phydev, PHY_EDPD_CONFIG);
+	if (rc < 0)
+		return rc;
+
+	rc |= PHY_EDPD_CONFIG_EXT_CROSSOVER_;
+	phy_write(phydev, PHY_EDPD_CONFIG, rc);
+	return lan87xx_config_aneg(phydev);
+}
+
 /*
  * The LAN87xx suffers from rare absence of the ENERGYON-bit when Ethernet cable
  * plugs in while LAN87xx is in Energy Detect Power-Down mode. This leads to
@@ -185,11 +255,20 @@ static void smsc_get_stats(struct phy_device *phydev,
 		data[i] = smsc_get_stat(phydev, i);
 }
 
+static void smsc_phy_remove(struct phy_device *phydev)
+{
+	struct smsc_phy_priv *priv = phydev->priv;
+
+	clk_disable_unprepare(priv->refclk);
+	clk_put(priv->refclk);
+}
+
 static int smsc_phy_probe(struct phy_device *phydev)
 {
 	struct device *dev = &phydev->mdio.dev;
 	struct device_node *of_node = dev->of_node;
 	struct smsc_phy_priv *priv;
+	int ret;
 
 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
@@ -202,6 +281,19 @@ static int smsc_phy_probe(struct phy_device *phydev)
 
 	phydev->priv = priv;
 
+	/* Make clk optional to keep DTB backward compatibility. */
+	priv->refclk = clk_get_optional(dev, NULL);
+	if (IS_ERR(priv->refclk))
+		dev_err_probe(dev, PTR_ERR(priv->refclk), "Failed to request clock\n");
+
+	ret = clk_prepare_enable(priv->refclk);
+	if (ret)
+		return ret;
+
+	ret = clk_set_rate(priv->refclk, 50 * 1000 * 1000);
+	if (ret)
+		return ret;
+
 	return 0;
 }
 
@@ -250,6 +342,9 @@ static struct phy_driver smsc_phy_driver[] = {
 	.suspend	= genphy_suspend,
 	.resume		= genphy_resume,
 }, {
+	/* This covers internal PHY (phy_id: 0x0007C0C3) for
+	 * LAN9500 (PID: 0x9500), LAN9514 (PID: 0xec00), LAN9505 (PID: 0x9505)
+	 */
 	.phy_id		= 0x0007c0c0, /* OUI=0x00800f, Model#=0x0c */
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "SMSC LAN8700",
@@ -262,6 +357,7 @@ static struct phy_driver smsc_phy_driver[] = {
 	.read_status	= lan87xx_read_status,
 	.config_init	= smsc_phy_config_init,
 	.soft_reset	= smsc_phy_reset,
+	.config_aneg	= lan87xx_config_aneg,
 
 	/* IRQ related */
 	.ack_interrupt	= smsc_phy_ack_interrupt,
@@ -293,19 +389,23 @@ static struct phy_driver smsc_phy_driver[] = {
 	.suspend	= genphy_suspend,
 	.resume		= genphy_resume,
 }, {
+	/* This covers internal PHY (phy_id: 0x0007C0F0) for
+	 * LAN9500A (PID: 0x9E00), LAN9505A (PID: 0x9E01)
+	 */
 	.phy_id		= 0x0007c0f0, /* OUI=0x00800f, Model#=0x0f */
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "SMSC LAN8710/LAN8720",
 
 	/* PHY_BASIC_FEATURES */
-	.flags		= PHY_RST_AFTER_CLK_EN,
 
 	.probe		= smsc_phy_probe,
+	.remove		= smsc_phy_remove,
 
 	/* basic functions */
 	.read_status	= lan87xx_read_status,
 	.config_init	= smsc_phy_config_init,
 	.soft_reset	= smsc_phy_reset,
+	.config_aneg	= lan87xx_config_aneg_ext,
 
 	/* IRQ related */
 	.ack_interrupt	= smsc_phy_ack_interrupt,