ath6kl: create core.c

Currently core functions are spread between various files, group all
the functions into file and rename the functions to follow the style
used elsewhere in the driver. This will make it easier to a separate core
module.

Also fix a bug where wiphy is freed too early.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

1 files changed, 292 insertions, 0 deletions

diff --git a/drivers/net/wireless/ath/ath6kl/core.c b/drivers/net/wireless/ath/ath6kl/core.c
new file mode 100644
index 000000000000..40fad5ec9366
--- /dev/null
+++ b/drivers/net/wireless/ath/ath6kl/core.c
@@ -0,0 +1,292 @@
+/*
+ * Copyright (c) 2004-2011 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "core.h"
+
+#include <linux/moduleparam.h>
+
+#include "debug.h"
+#include "hif-ops.h"
+#include "cfg80211.h"
+
+unsigned int debug_mask;
+static bool suspend_cutpower;
+static unsigned int uart_debug;
+static unsigned int ath6kl_p2p;
+
+module_param(debug_mask, uint, 0644);
+module_param(suspend_cutpower, bool, 0444);
+module_param(uart_debug, uint, 0644);
+module_param(ath6kl_p2p, uint, 0644);
+
+int ath6kl_core_init(struct ath6kl *ar)
+{
+	struct ath6kl_bmi_target_info targ_info;
+	struct net_device *ndev;
+	int ret = 0, i;
+
+	ar->ath6kl_wq = create_singlethread_workqueue("ath6kl");
+	if (!ar->ath6kl_wq)
+		return -ENOMEM;
+
+	ret = ath6kl_bmi_init(ar);
+	if (ret)
+		goto err_wq;
+
+	/*
+	 * Turn on power to get hardware (target) version and leave power
+	 * on delibrately as we will boot the hardware anyway within few
+	 * seconds.
+	 */
+	ret = ath6kl_hif_power_on(ar);
+	if (ret)
+		goto err_bmi_cleanup;
+
+	ret = ath6kl_bmi_get_target_info(ar, &targ_info);
+	if (ret)
+		goto err_power_off;
+
+	ar->version.target_ver = le32_to_cpu(targ_info.version);
+	ar->target_type = le32_to_cpu(targ_info.type);
+	ar->wiphy->hw_version = le32_to_cpu(targ_info.version);
+
+	ret = ath6kl_init_hw_params(ar);
+	if (ret)
+		goto err_power_off;
+
+	ar->htc_target = ath6kl_htc_create(ar);
+
+	if (!ar->htc_target) {
+		ret = -ENOMEM;
+		goto err_power_off;
+	}
+
+	ret = ath6kl_init_fetch_firmwares(ar);
+	if (ret)
+		goto err_htc_cleanup;
+
+	/* FIXME: we should free all firmwares in the error cases below */
+
+	/* Indicate that WMI is enabled (although not ready yet) */
+	set_bit(WMI_ENABLED, &ar->flag);
+	ar->wmi = ath6kl_wmi_init(ar);
+	if (!ar->wmi) {
+		ath6kl_err("failed to initialize wmi\n");
+		ret = -EIO;
+		goto err_htc_cleanup;
+	}
+
+	ath6kl_dbg(ATH6KL_DBG_TRC, "%s: got wmi @ 0x%p.\n", __func__, ar->wmi);
+
+	ret = ath6kl_cfg80211_init(ar);
+	if (ret)
+		goto err_node_cleanup;
+
+	ret = ath6kl_debug_init(ar);
+	if (ret) {
+		wiphy_unregister(ar->wiphy);
+		goto err_node_cleanup;
+	}
+
+	for (i = 0; i < ar->vif_max; i++)
+		ar->avail_idx_map |= BIT(i);
+
+	rtnl_lock();
+
+	/* Add an initial station interface */
+	ndev = ath6kl_interface_add(ar, "wlan%d", NL80211_IFTYPE_STATION, 0,
+				    INFRA_NETWORK);
+
+	rtnl_unlock();
+
+	if (!ndev) {
+		ath6kl_err("Failed to instantiate a network device\n");
+		ret = -ENOMEM;
+		wiphy_unregister(ar->wiphy);
+		goto err_debug_init;
+	}
+
+
+	ath6kl_dbg(ATH6KL_DBG_TRC, "%s: name=%s dev=0x%p, ar=0x%p\n",
+			__func__, ndev->name, ndev, ar);
+
+	/* setup access class priority mappings */
+	ar->ac_stream_pri_map[WMM_AC_BK] = 0; /* lowest  */
+	ar->ac_stream_pri_map[WMM_AC_BE] = 1;
+	ar->ac_stream_pri_map[WMM_AC_VI] = 2;
+	ar->ac_stream_pri_map[WMM_AC_VO] = 3; /* highest */
+
+	/* give our connected endpoints some buffers */
+	ath6kl_rx_refill(ar->htc_target, ar->ctrl_ep);
+	ath6kl_rx_refill(ar->htc_target, ar->ac2ep_map[WMM_AC_BE]);
+
+	/* allocate some buffers that handle larger AMSDU frames */
+	ath6kl_refill_amsdu_rxbufs(ar, ATH6KL_MAX_AMSDU_RX_BUFFERS);
+
+	ath6kl_cookie_init(ar);
+
+	ar->conf_flags = ATH6KL_CONF_IGNORE_ERP_BARKER |
+			 ATH6KL_CONF_ENABLE_11N | ATH6KL_CONF_ENABLE_TX_BURST;
+
+	if (suspend_cutpower)
+		ar->conf_flags |= ATH6KL_CONF_SUSPEND_CUTPOWER;
+
+	if (uart_debug)
+		ar->conf_flags |= ATH6KL_CONF_UART_DEBUG;
+
+	ar->wiphy->flags |= WIPHY_FLAG_SUPPORTS_FW_ROAM |
+			    WIPHY_FLAG_HAVE_AP_SME |
+			    WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL |
+			    WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD;
+
+	if (test_bit(ATH6KL_FW_CAPABILITY_SCHED_SCAN, ar->fw_capabilities))
+		ar->wiphy->flags |= WIPHY_FLAG_SUPPORTS_SCHED_SCAN;
+
+	ar->wiphy->probe_resp_offload =
+		NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS |
+		NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2 |
+		NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P |
+		NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U;
+
+	set_bit(FIRST_BOOT, &ar->flag);
+
+	ndev->hw_features |= NETIF_F_IP_CSUM | NETIF_F_RXCSUM;
+
+	ret = ath6kl_init_hw_start(ar);
+	if (ret) {
+		ath6kl_err("Failed to start hardware: %d\n", ret);
+		goto err_rxbuf_cleanup;
+	}
+
+	/*
+	 * Set mac address which is received in ready event
+	 * FIXME: Move to ath6kl_interface_add()
+	 */
+	memcpy(ndev->dev_addr, ar->mac_addr, ETH_ALEN);
+
+	return ret;
+
+err_rxbuf_cleanup:
+	ath6kl_htc_flush_rx_buf(ar->htc_target);
+	ath6kl_cleanup_amsdu_rxbufs(ar);
+	rtnl_lock();
+	ath6kl_cfg80211_vif_cleanup(netdev_priv(ndev));
+	rtnl_unlock();
+	wiphy_unregister(ar->wiphy);
+err_debug_init:
+	ath6kl_debug_cleanup(ar);
+err_node_cleanup:
+	ath6kl_wmi_shutdown(ar->wmi);
+	clear_bit(WMI_ENABLED, &ar->flag);
+	ar->wmi = NULL;
+err_htc_cleanup:
+	ath6kl_htc_cleanup(ar->htc_target);
+err_power_off:
+	ath6kl_hif_power_off(ar);
+err_bmi_cleanup:
+	ath6kl_bmi_cleanup(ar);
+err_wq:
+	destroy_workqueue(ar->ath6kl_wq);
+
+	return ret;
+}
+
+struct ath6kl *ath6kl_core_create(struct device *dev)
+{
+	struct ath6kl *ar;
+	u8 ctr;
+
+	ar = ath6kl_cfg80211_create();
+	if (!ar)
+		return NULL;
+
+	ar->p2p = !!ath6kl_p2p;
+	ar->dev = dev;
+
+	ar->vif_max = 1;
+
+	ar->max_norm_iface = 1;
+
+	spin_lock_init(&ar->lock);
+	spin_lock_init(&ar->mcastpsq_lock);
+	spin_lock_init(&ar->list_lock);
+
+	init_waitqueue_head(&ar->event_wq);
+	sema_init(&ar->sem, 1);
+
+	INIT_LIST_HEAD(&ar->amsdu_rx_buffer_queue);
+	INIT_LIST_HEAD(&ar->vif_list);
+
+	clear_bit(WMI_ENABLED, &ar->flag);
+	clear_bit(SKIP_SCAN, &ar->flag);
+	clear_bit(DESTROY_IN_PROGRESS, &ar->flag);
+
+	ar->listen_intvl_b = A_DEFAULT_LISTEN_INTERVAL;
+	ar->tx_pwr = 0;
+
+	ar->intra_bss = 1;
+	ar->lrssi_roam_threshold = DEF_LRSSI_ROAM_THRESHOLD;
+
+	ar->state = ATH6KL_STATE_OFF;
+
+	memset((u8 *)ar->sta_list, 0,
+	       AP_MAX_NUM_STA * sizeof(struct ath6kl_sta));
+
+	/* Init the PS queues */
+	for (ctr = 0; ctr < AP_MAX_NUM_STA; ctr++) {
+		spin_lock_init(&ar->sta_list[ctr].psq_lock);
+		skb_queue_head_init(&ar->sta_list[ctr].psq);
+		skb_queue_head_init(&ar->sta_list[ctr].apsdq);
+	}
+
+	skb_queue_head_init(&ar->mcastpsq);
+
+	memcpy(ar->ap_country_code, DEF_AP_COUNTRY_CODE, 3);
+
+	return ar;
+}
+
+void ath6kl_core_cleanup(struct ath6kl *ar)
+{
+	ath6kl_hif_power_off(ar);
+
+	destroy_workqueue(ar->ath6kl_wq);
+
+	if (ar->htc_target)
+		ath6kl_htc_cleanup(ar->htc_target);
+
+	ath6kl_cookie_cleanup(ar);
+
+	ath6kl_cleanup_amsdu_rxbufs(ar);
+
+	ath6kl_bmi_cleanup(ar);
+
+	ath6kl_debug_cleanup(ar);
+
+	kfree(ar->fw_board);
+	kfree(ar->fw_otp);
+	kfree(ar->fw);
+	kfree(ar->fw_patch);
+	kfree(ar->fw_testscript);
+
+	ath6kl_cfg80211_cleanup(ar);
+}
+
+void ath6kl_core_destroy(struct ath6kl *ar)
+{
+	ath6kl_cfg80211_destroy(ar);
+}
+