Merge tag 'wireless-drivers-next-for-davem-2015-04-01' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
Major changes:

ath9k:

* add Active Interference Cancellation, a method implemented in the HW
  to counter WLAN RX > sensitivity degradation when BT is transmitting
  at the same time. This feature is supported by cards like WB222
  based on AR9462.

iwlwifi:

* Location Aware Regulatory was added by Arik
* 8000 device family work
* update to the BT Coex firmware API

brmcfmac:

* add new BCM43455 and BCM43457 SDIO device support
* add new BCM43430 SDIO device support

wil6210:

* take care of AP bridging
* fix NAPI behavior
* found approach to achieve 4*n+2 alignment of Rx frames

rt2x00:

* add new rt2800usb device DWA 130

rtlwifi:

* add USB ID for D-Link DWA-131
* add USB ID ASUS N10 WiFi dongle

mwifiex:

* throughput enhancements
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 30 insertions, 4 deletions

diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c
index 47d14db59b93..b97172667bc7 100644
--- a/drivers/net/wireless/ath/wil6210/cfg80211.c
+++ b/drivers/net/wireless/ath/wil6210/cfg80211.c
@@ -14,6 +14,7 @@
  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
 
+#include <linux/etherdevice.h>
 #include "wil6210.h"
 #include "wmi.h"
 
@@ -217,7 +218,7 @@ static int wil_cfg80211_dump_station(struct wiphy *wiphy,
 	if (cid < 0)
 		return -ENOENT;
 
-	memcpy(mac, wil->sta[cid].addr, ETH_ALEN);
+	ether_addr_copy(mac, wil->sta[cid].addr);
 	wil_dbg_misc(wil, "%s(%pM) CID %d\n", __func__, mac, cid);
 
 	rc = wil_cid_fill_sinfo(wil, cid, sinfo);
@@ -478,8 +479,8 @@ static int wil_cfg80211_connect(struct wiphy *wiphy,
 	}
 	conn.channel = ch - 1;
 
-	memcpy(conn.bssid, bss->bssid, ETH_ALEN);
-	memcpy(conn.dst_mac, bss->bssid, ETH_ALEN);
+	ether_addr_copy(conn.bssid, bss->bssid);
+	ether_addr_copy(conn.dst_mac, bss->bssid);
 
 	set_bit(wil_status_fwconnecting, wil->status);
 
@@ -782,8 +783,17 @@ static int wil_cfg80211_start_ap(struct wiphy *wiphy,
 	rc = wmi_pcp_start(wil, info->beacon_interval, wmi_nettype,
 			   channel->hw_value);
 	if (rc)
-		netif_carrier_off(ndev);
+		goto err_pcp_start;
 
+	rc = wil_bcast_init(wil);
+	if (rc)
+		goto err_bcast;
+
+	goto out; /* success */
+err_bcast:
+	wmi_pcp_stop(wil);
+err_pcp_start:
+	netif_carrier_off(ndev);
 out:
 	mutex_unlock(&wil->mutex);
 	return rc;
@@ -917,6 +927,21 @@ static int wil_cfg80211_probe_client(struct wiphy *wiphy,
 	return 0;
 }
 
+static int wil_cfg80211_change_bss(struct wiphy *wiphy,
+				   struct net_device *dev,
+				   struct bss_parameters *params)
+{
+	struct wil6210_priv *wil = wiphy_to_wil(wiphy);
+
+	if (params->ap_isolate >= 0) {
+		wil_dbg_misc(wil, "%s(ap_isolate %d => %d)\n", __func__,
+			     wil->ap_isolate, params->ap_isolate);
+		wil->ap_isolate = params->ap_isolate;
+	}
+
+	return 0;
+}
+
 static struct cfg80211_ops wil_cfg80211_ops = {
 	.scan = wil_cfg80211_scan,
 	.connect = wil_cfg80211_connect,
@@ -937,6 +962,7 @@ static struct cfg80211_ops wil_cfg80211_ops = {
 	.stop_ap = wil_cfg80211_stop_ap,
 	.del_station = wil_cfg80211_del_station,
 	.probe_client = wil_cfg80211_probe_client,
+	.change_bss = wil_cfg80211_change_bss,
 };
 
 static void wil_wiphy_init(struct wiphy *wiphy)