Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from David Miller:

 1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan.

 2) Support UDP segmentation in code TSO code, from Eric Dumazet.

 3) Allow flashing different flash images in cxgb4 driver, from Vishal
    Kulkarni.

 4) Add drop frames counter and flow status to tc flower offloading,
    from Po Liu.

 5) Support n-tuple filters in cxgb4, from Vishal Kulkarni.

 6) Various new indirect call avoidance, from Eric Dumazet and Brian
    Vazquez.

 7) Fix BPF verifier failures on 32-bit pointer arithmetic, from
    Yonghong Song.

 8) Support querying and setting hardware address of a port function via
    devlink, use this in mlx5, from Parav Pandit.

 9) Support hw ipsec offload on bonding slaves, from Jarod Wilson.

10) Switch qca8k driver over to phylink, from Jonathan McDowell.

11) In bpftool, show list of processes holding BPF FD references to
    maps, programs, links, and btf objects. From Andrii Nakryiko.

12) Several conversions over to generic power management, from Vaibhav
    Gupta.

13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry
    Yakunin.

14) Various https url conversions, from Alexander A. Klimov.

15) Timestamping and PHC support for mscc PHY driver, from Antoine
    Tenart.

16) Support bpf iterating over tcp and udp sockets, from Yonghong Song.

17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov.

18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan.

19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several
    drivers. From Luc Van Oostenryck.

20) XDP support for xen-netfront, from Denis Kirjanov.

21) Support receive buffer autotuning in MPTCP, from Florian Westphal.

22) Support EF100 chip in sfc driver, from Edward Cree.

23) Add XDP support to mvpp2 driver, from Matteo Croce.

24) Support MPTCP in sock_diag, from Paolo Abeni.

25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic
    infrastructure, from Jakub Kicinski.

26) Several pci_ --> dma_ API conversions, from Christophe JAILLET.

27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel.

28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki.

29) Refactor a lot of networking socket option handling code in order to
    avoid set_fs() calls, from Christoph Hellwig.

30) Add rfc4884 support to icmp code, from Willem de Bruijn.

31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei.

32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin.

33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin.

34) Support TCP syncookies in MPTCP, from Flowian Westphal.

35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano
    Brivio.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits)
  net: thunderx: initialize VF's mailbox mutex before first usage
  usb: hso: remove bogus check for EINPROGRESS
  usb: hso: no complaint about kmalloc failure
  hso: fix bailout in error case of probe
  ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM
  selftests/net: relax cpu affinity requirement in msg_zerocopy test
  mptcp: be careful on subflow creation
  selftests: rtnetlink: make kci_test_encap() return sub-test result
  selftests: rtnetlink: correct the final return value for the test
  net: dsa: sja1105: use detected device id instead of DT one on mismatch
  tipc: set ub->ifindex for local ipv6 address
  ipv6: add ipv6_dev_find()
  net: openvswitch: silence suspicious RCU usage warning
  Revert "vxlan: fix tos value before xmit"
  ptp: only allow phase values lower than 1 period
  farsync: switch from 'pci_' to 'dma_' API
  wan: wanxl: switch from 'pci_' to 'dma_' API
  hv_netvsc: do not use VF device if link is down
  dpaa2-eth: Fix passing zero to 'PTR_ERR' warning
  net: macb: Properly handle phylink on at91sam9x
  ...

1 files changed, 803 insertions, 0 deletions

diff --git a/drivers/net/wireless/microchip/wilc1000/wlan_if.h b/drivers/net/wireless/microchip/wilc1000/wlan_if.h
new file mode 100644
index 000000000000..f85fd575136d
--- /dev/null
+++ b/drivers/net/wireless/microchip/wilc1000/wlan_if.h
@@ -0,0 +1,803 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2012 - 2018 Microchip Technology Inc., and its subsidiaries.
+ * All rights reserved.
+ */
+
+#ifndef WILC_WLAN_IF_H
+#define WILC_WLAN_IF_H
+
+#include <linux/netdevice.h>
+#include "fw.h"
+
+/********************************************
+ *
+ *      Wlan Configuration ID
+ *
+ ********************************************/
+
+enum bss_types {
+	WILC_FW_BSS_TYPE_INFRA = 0,
+	WILC_FW_BSS_TYPE_INDEPENDENT,
+	WILC_FW_BSS_TYPE_AP,
+};
+
+enum {
+	WILC_FW_OPER_MODE_B_ONLY = 0,	 /* 1, 2 M, otherwise 5, 11 M */
+	WILC_FW_OPER_MODE_G_ONLY,	 /* 6,12,24 otherwise 9,18,36,48,54 */
+	WILC_FW_OPER_MODE_G_MIXED_11B_1, /* 1,2,5.5,11 otherwise all on */
+	WILC_FW_OPER_MODE_G_MIXED_11B_2, /* 1,2,5,11,6,12,24 otherwise all on */
+};
+
+enum {
+	WILC_FW_PREAMBLE_SHORT = 0,	/* Short Preamble */
+	WILC_FW_PREAMBLE_LONG = 1,	/* Long Preamble */
+	WILC_FW_PREAMBLE_AUTO = 2,	/* Auto Preamble Selection */
+};
+
+enum {
+	WILC_FW_PASSIVE_SCAN = 0,
+	WILC_FW_ACTIVE_SCAN = 1,
+};
+
+enum {
+	WILC_FW_NO_POWERSAVE = 0,
+	WILC_FW_MIN_FAST_PS = 1,
+	WILC_FW_MAX_FAST_PS = 2,
+	WILC_FW_MIN_PSPOLL_PS = 3,
+	WILC_FW_MAX_PSPOLL_PS = 4
+};
+
+enum chip_ps_states {
+	WILC_CHIP_WAKEDUP = 0,
+	WILC_CHIP_SLEEPING_AUTO = 1,
+	WILC_CHIP_SLEEPING_MANUAL = 2
+};
+
+enum bus_acquire {
+	WILC_BUS_ACQUIRE_ONLY = 0,
+	WILC_BUS_ACQUIRE_AND_WAKEUP = 1,
+};
+
+enum bus_release {
+	WILC_BUS_RELEASE_ONLY = 0,
+	WILC_BUS_RELEASE_ALLOW_SLEEP = 1,
+};
+
+enum {
+	WILC_FW_NO_ENCRYPT = 0,
+	WILC_FW_ENCRYPT_ENABLED = BIT(0),
+	WILC_FW_WEP = BIT(1),
+	WILC_FW_WEP_EXTENDED = BIT(2),
+	WILC_FW_WPA = BIT(3),
+	WILC_FW_WPA2 = BIT(4),
+	WILC_FW_AES = BIT(5),
+	WILC_FW_TKIP = BIT(6)
+};
+
+enum {
+	WILC_FW_SEC_NO = WILC_FW_NO_ENCRYPT,
+	WILC_FW_SEC_WEP = WILC_FW_WEP | WILC_FW_ENCRYPT_ENABLED,
+	WILC_FW_SEC_WEP_EXTENDED = WILC_FW_WEP_EXTENDED | WILC_FW_SEC_WEP,
+	WILC_FW_SEC_WPA = WILC_FW_WPA | WILC_FW_ENCRYPT_ENABLED,
+	WILC_FW_SEC_WPA_AES = WILC_FW_AES | WILC_FW_SEC_WPA,
+	WILC_FW_SEC_WPA_TKIP = WILC_FW_TKIP | WILC_FW_SEC_WPA,
+	WILC_FW_SEC_WPA2 = WILC_FW_WPA2 | WILC_FW_ENCRYPT_ENABLED,
+	WILC_FW_SEC_WPA2_AES = WILC_FW_AES | WILC_FW_SEC_WPA2,
+	WILC_FW_SEC_WPA2_TKIP = WILC_FW_TKIP | WILC_FW_SEC_WPA2
+};
+
+enum authtype {
+	WILC_FW_AUTH_OPEN_SYSTEM = 1,
+	WILC_FW_AUTH_SHARED_KEY = 2,
+	WILC_FW_AUTH_ANY = 3,
+	WILC_FW_AUTH_IEEE8021 = 5
+};
+
+enum site_survey {
+	WILC_FW_SITE_SURVEY_1CH = 0,
+	WILC_FW_SITE_SURVEY_ALL_CH = 1,
+	WILC_FW_SITE_SURVEY_OFF = 2
+};
+
+enum {
+	WILC_FW_ACK_POLICY_NORMAL = 0,
+	WILC_FW_ACK_NO_POLICY,
+};
+
+enum {
+	WILC_FW_REKEY_POLICY_DISABLE = 1,
+	WILC_FW_REKEY_POLICY_TIME_BASE,
+	WILC_FW_REKEY_POLICY_PKT_BASE,
+	WILC_FW_REKEY_POLICY_TIME_PKT_BASE
+};
+
+enum {
+	WILC_FW_FILTER_NO = 0x00,
+	WILC_FW_FILTER_AP_ONLY = 0x01,
+	WILC_FW_FILTER_STA_ONLY = 0x02
+};
+
+enum {
+	WILC_FW_11N_PROT_AUTO = 0,	/* Auto */
+	WILC_FW_11N_NO_PROT,		/* Do not use any protection */
+	WILC_FW_11N_PROT_ERP,		/* Protect all ERP frame exchanges */
+	WILC_FW_11N_PROT_HT,		/* Protect all HT frame exchanges  */
+	WILC_FW_11N_PROT_GF		/* Protect all GF frame exchanges  */
+};
+
+enum {
+	WILC_FW_ERP_PROT_SELF_CTS,
+	WILC_FW_ERP_PROT_RTS_CTS,
+};
+
+enum {
+	WILC_FW_11N_OP_MODE_HT_MIXED = 1,
+	WILC_FW_11N_OP_MODE_HT_ONLY_20MHZ,
+	WILC_FW_11N_OP_MODE_HT_ONLY_20_40MHZ,
+};
+
+enum {
+	WILC_FW_OBBS_NONHT_NO_DETECT = 0,
+	WILC_FW_OBBS_NONHT_DETECT_ONLY = 1,
+	WILC_FW_OBBS_NONHT_DETECT_PROTECT = 2,
+	WILC_FW_OBBS_NONHT_DETECT_PROTECT_REPORT = 3,
+};
+
+enum {
+	WILC_FW_HT_PROT_RTS_CTS_NONHT = 0,  /* RTS-CTS at non-HT rate */
+	WILC_FW_HT_PROT_FIRST_FRAME_NONHT,  /* First frame at non-HT rate */
+	WILC_FW_HT_PROT_LSIG_TXOP,	    /* LSIG TXOP Protection */
+	WILC_FW_HT_PROT_FIRST_FRAME_MIXED,  /* First frame at Mixed format */
+};
+
+enum {
+	WILC_FW_SMPS_MODE_STATIC = 1,
+	WILC_FW_SMPS_MODE_DYNAMIC = 2,
+	WILC_FW_SMPS_MODE_MIMO = 3,	/* power save disable */
+};
+
+enum {
+	WILC_FW_TX_RATE_AUTO = 0,
+	WILC_FW_TX_RATE_MBPS_1 = 1,
+	WILC_FW_TX_RATE_MBPS_2 = 2,
+	WILC_FW_TX_RATE_MBPS_5_5 = 5,
+	WILC_FW_TX_RATE_MBPS_11 = 11,
+	WILC_FW_TX_RATE_MBPS_6 = 6,
+	WILC_FW_TX_RATE_MBPS_9 = 9,
+	WILC_FW_TX_RATE_MBPS_12 = 12,
+	WILC_FW_TX_RATE_MBPS_18 = 18,
+	WILC_FW_TX_RATE_MBPS_24 = 24,
+	WILC_FW_TX_RATE_MBPS_36 = 36,
+	WILC_FW_TX_RATE_MBPS_48 = 48,
+	WILC_FW_TX_RATE_MBPS_54 = 54
+};
+
+enum {
+	WILC_FW_DEFAULT_SCAN = 0,
+	WILC_FW_USER_SCAN = BIT(0),
+	WILC_FW_OBSS_PERIODIC_SCAN = BIT(1),
+	WILC_FW_OBSS_ONETIME_SCAN = BIT(2)
+};
+
+enum {
+	WILC_FW_ACTION_FRM_IDX = 0,
+	WILC_FW_PROBE_REQ_IDX = 1
+};
+
+enum wid_type {
+	WID_CHAR		= 0,
+	WID_SHORT		= 1,
+	WID_INT			= 2,
+	WID_STR			= 3,
+	WID_BIN_DATA		= 4,
+	WID_BIN			= 5,
+};
+
+struct wid {
+	u16 id;
+	enum wid_type type;
+	s32 size;
+	s8 *val;
+};
+
+enum {
+	WID_NIL				= 0xffff,
+
+	/*
+	 *  BSS Type
+	 *  -----------------------------------------------------------
+	 *  Configuration : Infrastructure   Independent   Access Point
+	 *  Values to set :         0               1            2
+	 *  -----------------------------------------------------------
+	 */
+	WID_BSS_TYPE			= 0x0000,
+
+	/*
+	 *  Transmit Rate
+	 *  -----------------------------------------------------------
+	 *  Configuration : 1  2  5.5  11  6  9  12  18  24  36  48  54
+	 *  Values to set : 1  2    5  11  6  9  12  18  24  36  48  54
+	 *  -----------------------------------------------------------
+	 */
+	WID_CURRENT_TX_RATE		= 0x0001,
+
+	/*
+	 *  Channel
+	 *  -----------------------------------------------------------
+	 *  Configuration(g) : 1  2  3  4  5  6  7  8  9 10 11 12 13 14
+	 *  Values to set    : 1  2  3  4  5  6  7  8  9 10 11 12 13 14
+	 *  -----------------------------------------------------------
+	 */
+	WID_CURRENT_CHANNEL		= 0x0002,
+
+	/*
+	 *  Preamble
+	 *  -----------------------------------------------------------
+	 *  Configuration :    short    long      Auto
+	 *  Values to set :       0       1         2
+	 *  -----------------------------------------------------------
+	 */
+	WID_PREAMBLE			= 0x0003,
+
+	/*
+	 * 11g operating mode (ignored if 11g not present)
+	 *  -----------------------------------------------------------
+	 *  Configuration :   HighPerf  Compat(RSet #1) Compat(RSet #2)
+	 *  Values to set :          1               2               3
+	 *  -----------------------------------------------------------
+	 */
+	WID_11G_OPERATING_MODE		= 0x0004,
+
+	/*
+	 *  Mac status (response only)
+	 *  -----------------------------------------------------------
+	 *  Configuration :   disconnect  connect
+	 *  Values to get :          0       1
+	 *  -----------------------------------------------------------
+	 */
+	WID_STATUS			= 0x0005,
+
+	/*
+	 *  Scan type
+	 *  -----------------------------------------------------------
+	 *  Configuration :   Passive Scanning   Active Scanning
+	 *  Values to set :                  0                 1
+	 *  -----------------------------------------------------------
+	 */
+	WID_SCAN_TYPE			= 0x0007,
+
+	/*
+	 *  Key Id (WEP default key Id)
+	 *  -----------------------------------------------------------
+	 *  Configuration :   Any value between 0 to 3
+	 *  Values to set :   Same value. Default is 0
+	 *  -----------------------------------------------------------
+	 */
+	WID_KEY_ID			= 0x0009,
+
+	/*
+	 *  QoS Enable
+	 *  -----------------------------------------------------------
+	 *  Configuration :   QoS Disable   WMM Enable
+	 *  Values to set :   0             1
+	 *  -----------------------------------------------------------
+	 */
+	WID_QOS_ENABLE			= 0x000A,
+
+	/*
+	 *  Power Management
+	 *  -----------------------------------------------------------
+	 *  Configuration : NO_POWERSAVE MIN_POWERSAVE MAX_POWERSAVE
+	 *  Values to set : 0            1             2
+	 *  -----------------------------------------------------------
+	 */
+	WID_POWER_MANAGEMENT		= 0x000B,
+
+	/*
+	 *  WEP/802 11I Configuration
+	 *  -----------------------------------------------------------
+	 *  Configuration:Disable WP40 WP104 WPA-AES WPA-TKIP RSN-AES RSN-TKIP
+	 *  Values (0x)  :   00     03   07     29       49       31      51
+	 *  Configuration:WPA-AES+TKIP RSN-AES+TKIP
+	 *  Values (0x)  :      69        71
+	 *  -----------------------------------------------------------
+	 */
+	WID_11I_MODE			= 0x000C,
+
+	/*
+	 *  WEP Configuration: Used in BSS STA mode only when WEP is enabled
+	 *  -----------------------------------------------------------
+	 *  Configuration : Open System Shared Key Any Type | 802.1x Auth
+	 *  Values (0x)   :    01             02         03 |    BIT2
+	 *  -----------------------------------------------------------
+	 */
+	WID_AUTH_TYPE			= 0x000D,
+
+	/*
+	 *  Site Survey Type
+	 *  -----------------------------------------------------------
+	 *  Configuration       :  Values to set
+	 *  Survey 1 Channel    :  0
+	 *  survey all Channels :  1
+	 *  Disable Site Survey :  2
+	 *  -----------------------------------------------------------
+	 */
+	WID_SITE_SURVEY			= 0x000E,
+
+	/*
+	 *  Listen Interval
+	 *  -----------------------------------------------------------
+	 *  Configuration :   Any value between 1 to 255
+	 *  Values to set :   Same value. Default is 3
+	 *  -----------------------------------------------------------
+	 */
+	WID_LISTEN_INTERVAL		= 0x000F,
+
+	/*
+	 *  DTIM Period
+	 *  -----------------------------------------------------------
+	 *  Configuration :   Any value between 1 to 255
+	 *  Values to set :   Same value. Default is 3
+	 *  -----------------------------------------------------------
+	 */
+	WID_DTIM_PERIOD			= 0x0010,
+
+	/*
+	 *  ACK Policy
+	 *  -----------------------------------------------------------
+	 *  Configuration :   Normal Ack            No Ack
+	 *  Values to set :       0                   1
+	 *  -----------------------------------------------------------
+	 */
+	WID_ACK_POLICY			= 0x0011,
+
+	/*
+	 *  Reset MAC (Set only)
+	 *  -----------------------------------------------------------
+	 *  Configuration :   Don't Reset	Reset	No Request
+	 *  Values to set :       0               1	    2
+	 *  -----------------------------------------------------------
+	 */
+	WID_RESET			= 0x0012,
+
+	/*
+	 *  Broadcast SSID Option: Setting this will adhere to "" SSID element
+	 *  -----------------------------------------------------------
+	 *  Configuration :   Enable             Disable
+	 *  Values to set :   1                  0
+	 *  -----------------------------------------------------------
+	 */
+	WID_BCAST_SSID			= 0x0015,
+
+	/*
+	 *  Disconnect (Station)
+	 *  -----------------------------------------------------------
+	 *  Configuration :   Association ID
+	 *  Values to set :   Association ID
+	 *  -----------------------------------------------------------
+	 */
+	WID_DISCONNECT			= 0x0016,
+
+	/*
+	 *  11a Tx Power Level
+	 *  -----------------------------------------------------------
+	 *  Configuration : Sets TX Power (Higher the value greater the power)
+	 *  Values to set : Any value between 0 and 63 (inclusive Default 48)
+	 *  -----------------------------------------------------------
+	 */
+	WID_TX_POWER_LEVEL_11A		= 0x0018,
+
+	/*
+	 *  Group Key Update Policy Selection
+	 *  -----------------------------------------------------------
+	 *  Configuration : Disabled timeBased packetBased timePacketBased
+	 *  Values to set :   1            2          3              4
+	 *  -----------------------------------------------------------
+	 */
+	WID_REKEY_POLICY		= 0x0019,
+
+	/*
+	 *  Allow Short Slot
+	 *  -----------------------------------------------------------
+	 *  Configuration : Disallow Short Slot      Allow Short Slot
+	 *          (Enable Only Long Slot) (Enable Short Slot if applicable)
+	 *  Values to set :    0         1
+	 *  -----------------------------------------------------------
+	 */
+	WID_SHORT_SLOT_ALLOWED		= 0x001A,
+
+	WID_PHY_ACTIVE_REG		= 0x001B,
+
+	/*
+	 *  11b Tx Power Level
+	 *  -----------------------------------------------------------
+	 *  Configuration : Sets TX Power (Higher the value greater the power)
+	 *  Values to set : Any value between 0 and 63 (inclusive Default 48)
+	 *  -----------------------------------------------------------
+	 */
+	WID_TX_POWER_LEVEL_11B		= 0x001D,
+
+	/*
+	 *  Scan Request
+	 *  -----------------------------------------------------------
+	 *  Configuration : Request default scan
+	 *  Values to set : 0
+	 *  -----------------------------------------------------------
+	 */
+	WID_START_SCAN_REQ		= 0x001E,
+
+	/*
+	 *  Rssi (get only)
+	 *  -----------------------------------------------------------
+	 *  Configuration :
+	 *  Values to get : Rssi value
+	 *  -----------------------------------------------------------
+	 */
+	WID_RSSI			= 0x001F,
+
+	/*
+	 * Join Request
+	 *  -----------------------------------------------------------
+	 *  Configuration : Request to join
+	 *  Values to set : index of scan result
+	 *  -----------------------------------------------------------
+	 */
+	WID_JOIN_REQ			= 0x0020,
+
+	WID_LINKSPEED			= 0x0026,
+
+	/*
+	 *  Enable User Control of TX Power
+	 *  -----------------------------------------------------------
+	 *  Configuration : Disable                  Enable
+	 *  Values to set :    0                       1
+	 *  -----------------------------------------------------------
+	 */
+	WID_USER_CONTROL_ON_TX_POWER	= 0x0027,
+
+	WID_MEMORY_ACCESS_8BIT		= 0x0029,
+
+	/*
+	 *  Enable Auto RX Sensitivity feature
+	 *  -----------------------------------------------------------
+	 *  Configuration : Disable                  Enable
+	 *  Values to set :    0                       1
+	 *  -----------------------------------------------------------
+	 */
+	WID_AUTO_RX_SENSITIVITY		= 0x0032,
+
+	/*
+	 *  Receive Buffer Based Ack
+	 *  -----------------------------------------------------------
+	 *  Configuration : Disable                  Enable
+	 *  Values to set :    0                       1
+	 *  -----------------------------------------------------------
+	 */
+	WID_DATAFLOW_CONTROL		= 0x0033,
+
+	/*
+	 *  Scan Filter
+	 *  -----------------------------------------------------------
+	 *  Configuration : Class       No filter   AP only   Station Only
+	 *  Values to set :                0           1           2
+	 *  Configuration : Priority    High Rssi   Low Rssi     Detect
+	 *  Values to set :                0          0x4         0x0
+	 *  Configuration : Channel     filter off  filter on
+	 *  Values to set :                0          0x10
+	 *  -----------------------------------------------------------
+	 */
+	WID_SCAN_FILTER			= 0x0036,
+
+	/*
+	 *  Link Loss Threshold (measure in the beacon period)
+	 *  -----------------------------------------------------------
+	 *  Configuration : Any value between 10 and 254(Set to 255 disable)
+	 *  Values to set : Same value. Default is 10
+	 *  -----------------------------------------------------------
+	 */
+	WID_LINK_LOSS_THRESHOLD		= 0x0037,
+
+	WID_ABORT_RUNNING_SCAN		= 0x003E,
+
+	/* NMAC Character WID list */
+	WID_WPS_START			= 0x0043,
+
+	/*
+	 *  Protection mode for MAC
+	 *  -----------------------------------------------------------
+	 *  Configuration :  Auto  No protection  ERP    HT    GF
+	 *  Values to set :  0     1              2      3     4
+	 *  -----------------------------------------------------------
+	 */
+	WID_11N_PROT_MECH		= 0x0080,
+
+	/*
+	 *  ERP Protection type for MAC
+	 *  -----------------------------------------------------------
+	 *  Configuration :  Self-CTS   RTS-CTS
+	 *  Values to set :  0          1
+	 *  -----------------------------------------------------------
+	 */
+	WID_11N_ERP_PROT_TYPE		= 0x0081,
+
+	/*
+	 *  HT Option Enable
+	 *  -----------------------------------------------------------
+	 *  Configuration :   HT Enable          HT Disable
+	 *  Values to set :   1                  0
+	 *  -----------------------------------------------------------
+	 */
+	WID_11N_ENABLE			= 0x0082,
+
+	/*
+	 *  11n Operating mode (Note that 11g operating mode will also be
+	 *  used in addition to this, if this is set to HT Mixed mode)
+	 *  -----------------------------------------------------------
+	 *   Configuration :  HT Mixed  HT Only-20MHz   HT Only-20/40MHz
+	 *  Values to set :     1         2               3
+	 *  -----------------------------------------------------------
+	 */
+	WID_11N_OPERATING_MODE		= 0x0083,
+
+	/*
+	 *  11n OBSS non-HT STA Detection flag
+	 *  -----------------------------------------------------------
+	 *  Configuration :  Do not detect
+	 *  Values to set :  0
+	 *  Configuration :  Detect, do not protect or report
+	 *  Values to set :  1
+	 *  Configuration :  Detect, protect and do not report
+	 *  Values to set :  2
+	 *  Configuration :  Detect, protect and report to other BSS
+	 *  Values to set :  3
+	 *  -----------------------------------------------------------
+	 */
+	WID_11N_OBSS_NONHT_DETECTION	= 0x0084,
+
+	/*
+	 *  11n HT Protection Type
+	 *  -----------------------------------------------------------
+	 *  Configuration :  RTS-CTS   First Frame Exchange at non-HT-rate
+	 *  Values to set :  0         1
+	 *  Configuration :  LSIG TXOP First Frame Exchange in Mixed Fmt
+	 *  Values to set :  2         3
+	 *  -----------------------------------------------------------
+	 */
+	WID_11N_HT_PROT_TYPE		= 0x0085,
+
+	/*
+	 *  11n RIFS Protection Enable Flag
+	 *  -----------------------------------------------------------
+	 *  Configuration :  Disable    Enable
+	 *  Values to set :  0          1
+	 *  -----------------------------------------------------------
+	 */
+	WID_11N_RIFS_PROT_ENABLE	= 0x0086,
+
+	/*
+	 *  SMPS Mode
+	 *  -----------------------------------------------------------
+	 *  Configuration :  Static   Dynamic   MIMO (Power Save Disabled)
+	 *  Values to set :  1        2         3
+	 *  -----------------------------------------------------------
+	 */
+	WID_11N_SMPS_MODE		= 0x0087,
+
+	/*
+	 *  Current transmit MCS
+	 *  -----------------------------------------------------------
+	 *  Configuration :  MCS Index for data rate
+	 *  Values to set :  0 to 7
+	 *  -----------------------------------------------------------
+	 */
+	WID_11N_CURRENT_TX_MCS		= 0x0088,
+
+	WID_11N_PRINT_STATS		= 0x0089,
+
+	/*
+	 *  11n Short GI Enable Flag
+	 *  -----------------------------------------------------------
+	 *  Configuration :  Disable    Enable
+	 *  Values to set :  0          1
+	 *  -----------------------------------------------------------
+	 */
+	WID_11N_SHORT_GI_ENABLE		= 0x008D,
+
+	/*
+	 *  11n RIFS Enable Flag
+	 *  -----------------------------------------------------------
+	 *  Configuration :  Disable    Enable
+	 *  Values to set :  0          1
+	 *  -----------------------------------------------------------
+	 */
+	WID_RIFS_MODE			= 0x0094,
+
+	/*
+	 *  TX Abort Feature
+	 *  -----------------------------------------------------------
+	 *  Configuration :  Disable Self CTS    Enable Self CTS
+	 *  Values to set :             0                      1
+	 *  Configuration :  Disable TX Abort    Enable TX Abort
+	 *  Values to set :             2                      3
+	 *  Configuration :  Enable HW TX Abort Enable SW TX Abort
+	 *  Values to set :             4                      5
+	 *  -----------------------------------------------------------
+	 */
+	WID_TX_ABORT_CONFIG		= 0x00A1,
+
+	WID_REG_TSSI_11B_VALUE		= 0x00A6,
+	WID_REG_TSSI_11G_VALUE		= 0x00A7,
+	WID_REG_TSSI_11N_VALUE		= 0x00A8,
+	WID_TX_CALIBRATION		= 0x00A9,
+	WID_DSCR_TSSI_11B_VALUE		= 0x00AA,
+	WID_DSCR_TSSI_11G_VALUE		= 0x00AB,
+	WID_DSCR_TSSI_11N_VALUE		= 0x00AC,
+
+	/*
+	 *  Immediate Block-Ack Support
+	 *  -----------------------------------------------------------
+	 *  Configuration : Disable                  Enable
+	 *  Values to set :    0                       1
+	 *  -----------------------------------------------------------
+	 */
+	WID_11N_IMMEDIATE_BA_ENABLED	= 0x00AF,
+
+	/*
+	 *  TXOP Disable Flag
+	 *  -----------------------------------------------------------
+	 *  Configuration : Disable                  Enable
+	 *  Values to set :    1                        0
+	 *  -----------------------------------------------------------
+	 */
+	WID_11N_TXOP_PROT_DISABLE	= 0x00B0,
+
+	WID_TX_POWER_LEVEL_11N		= 0x00B1,
+
+	/* Custom Character WID list */
+	/* SCAN Complete notification WID*/
+	WID_SCAN_COMPLETE		= 0x00C9,
+
+	WID_DEL_BEACON			= 0x00CA,
+
+	WID_LOG_TERMINAL_SWITCH		= 0x00CD,
+	WID_TX_POWER			= 0x00CE,
+	/*  EMAC Short WID list */
+	/*  RTS Threshold */
+	/*
+	 *  -----------------------------------------------------------
+	 *  Configuration :   Any value between 256 to 2347
+	 *  Values to set :   Same value. Default is 2347
+	 *  -----------------------------------------------------------
+	 */
+	WID_RTS_THRESHOLD		= 0x1000,
+
+	/*
+	 *  Fragmentation Threshold
+	 *  -----------------------------------------------------------
+	 *  Configuration :   Any value between 256 to 2346
+	 *  Values to set :   Same value. Default is 2346
+	 *  -----------------------------------------------------------
+	 */
+	WID_FRAG_THRESHOLD		= 0x1001,
+
+	WID_SHORT_RETRY_LIMIT		= 0x1002,
+	WID_LONG_RETRY_LIMIT		= 0x1003,
+	WID_BEACON_INTERVAL		= 0x1006,
+	WID_MEMORY_ACCESS_16BIT		= 0x1008,
+	WID_PASSIVE_SCAN_TIME           = 0x100D,
+	WID_JOIN_START_TIMEOUT		= 0x100F,
+	WID_ASOC_TIMEOUT		= 0x1011,
+	WID_11I_PROTOCOL_TIMEOUT	= 0x1012,
+	WID_EAPOL_RESPONSE_TIMEOUT	= 0x1013,
+
+	/* NMAC Short WID list */
+	WID_11N_SIG_QUAL_VAL		= 0x1085,
+	WID_CCA_THRESHOLD		= 0x1087,
+
+	/* Custom Short WID list */
+
+	/* EMAC Integer WID list */
+	WID_FAILED_COUNT		= 0x2000,
+	WID_RETRY_COUNT			= 0x2001,
+	WID_MULTIPLE_RETRY_COUNT	= 0x2002,
+	WID_FRAME_DUPLICATE_COUNT	= 0x2003,
+	WID_ACK_FAILURE_COUNT		= 0x2004,
+	WID_RECEIVED_FRAGMENT_COUNT	= 0x2005,
+	WID_MCAST_RECEIVED_FRAME_COUNT	= 0x2006,
+	WID_FCS_ERROR_COUNT		= 0x2007,
+	WID_SUCCESS_FRAME_COUNT		= 0x2008,
+	WID_HUT_TX_COUNT		= 0x200A,
+	WID_TX_FRAGMENT_COUNT		= 0x200B,
+	WID_TX_MULTICAST_FRAME_COUNT	= 0x200C,
+	WID_RTS_SUCCESS_COUNT		= 0x200D,
+	WID_RTS_FAILURE_COUNT		= 0x200E,
+	WID_WEP_UNDECRYPTABLE_COUNT	= 0x200F,
+	WID_REKEY_PERIOD		= 0x2010,
+	WID_REKEY_PACKET_COUNT		= 0x2011,
+	WID_1X_SERV_ADDR		= 0x2012,
+	WID_STACK_IP_ADDR		= 0x2013,
+	WID_STACK_NETMASK_ADDR		= 0x2014,
+	WID_HW_RX_COUNT			= 0x2015,
+	WID_MEMORY_ADDRESS		= 0x201E,
+	WID_MEMORY_ACCESS_32BIT		= 0x201F,
+
+	/* NMAC Integer WID list */
+	/* Custom Integer WID list */
+	WID_GET_INACTIVE_TIME		= 0x2084,
+	/* EMAC String WID list */
+	WID_SSID			= 0x3000,
+	WID_FIRMWARE_VERSION		= 0x3001,
+	WID_OPERATIONAL_RATE_SET	= 0x3002,
+	WID_BSSID			= 0x3003,
+	WID_WEP_KEY_VALUE		= 0x3004,
+	WID_11I_PSK			= 0x3008,
+	WID_11E_P_ACTION_REQ		= 0x3009,
+	WID_1X_KEY			= 0x300A,
+	WID_HARDWARE_VERSION		= 0x300B,
+	WID_MAC_ADDR			= 0x300C,
+	WID_HUT_DEST_ADDR		= 0x300D,
+	WID_PHY_VERSION			= 0x300F,
+	WID_SUPP_USERNAME		= 0x3010,
+	WID_SUPP_PASSWORD		= 0x3011,
+	WID_SITE_SURVEY_RESULTS		= 0x3012,
+	WID_RX_POWER_LEVEL		= 0x3013,
+	WID_SET_STA_MAC_INACTIVE_TIME	= 0x3017,
+	WID_ADD_WEP_KEY			= 0x3019,
+	WID_REMOVE_WEP_KEY		= 0x301A,
+	WID_ADD_PTK			= 0x301B,
+	WID_ADD_RX_GTK			= 0x301C,
+	WID_ADD_TX_GTK			= 0x301D,
+	WID_REMOVE_KEY			= 0x301E,
+	WID_ASSOC_REQ_INFO		= 0x301F,
+	WID_ASSOC_RES_INFO		= 0x3020,
+	WID_MANUFACTURER		= 0x3026, /* Added for CAPI tool */
+	WID_MODEL_NAME			= 0x3027, /* Added for CAPI tool */
+	WID_MODEL_NUM			= 0x3028, /* Added for CAPI tool */
+	WID_DEVICE_NAME			= 0x3029, /* Added for CAPI tool */
+
+	/* NMAC String WID list */
+	WID_SET_OPERATION_MODE		= 0x3079,
+	WID_11N_P_ACTION_REQ		= 0x3080,
+	WID_HUT_TEST_ID			= 0x3081,
+	WID_PMKID_INFO			= 0x3082,
+	WID_FIRMWARE_INFO		= 0x3083,
+	WID_REGISTER_FRAME		= 0x3084,
+	WID_DEL_ALL_STA			= 0x3085,
+	WID_REMAIN_ON_CHAN		= 0x3996,
+	WID_SSID_PROBE_REQ		= 0x3997,
+	WID_JOIN_REQ_EXTENDED		= 0x3998,
+
+	WID_IP_ADDRESS			= 0x3999,
+
+	/* Custom String WID list */
+
+	/* EMAC Binary WID list */
+	WID_UAPSD_CONFIG		= 0x4001,
+	WID_UAPSD_STATUS		= 0x4002,
+	WID_WMM_AP_AC_PARAMS		= 0x4003,
+	WID_WMM_STA_AC_PARAMS		= 0x4004,
+	WID_NETWORK_INFO		= 0x4005,
+	WID_STA_JOIN_INFO		= 0x4006,
+	WID_CONNECTED_STA_LIST		= 0x4007,
+
+	/* NMAC Binary WID list */
+	WID_11N_AUTORATE_TABLE		= 0x4080,
+
+	WID_SCAN_CHANNEL_LIST		= 0x4084,
+
+	WID_INFO_ELEMENT_PROBE		= 0x4085,
+	WID_INFO_ELEMENT_ASSOCIATE	= 0x4086,
+	WID_ADD_STA			= 0X4087,
+	WID_REMOVE_STA			= 0X4088,
+	WID_EDIT_STA			= 0X4089,
+	WID_ADD_BEACON			= 0x408a,
+
+	WID_SETUP_MULTICAST_FILTER	= 0x408b,
+
+	/* Miscellaneous WIDs */
+	WID_ALL				= 0x7FFE,
+	WID_MAX				= 0xFFFF
+};
+
+#endif