diff options
| author | Bitterblue Smith <rtl8821cerfe2@gmail.com> | 2023-12-31 01:45:54 +0300 |
|---|---|---|
| committer | Kalle Valo <kvalo@kernel.org> | 2024-01-10 17:55:18 +0300 |
| commit | 9475cc7ac31503521af95e38151e9d856e8ff30b (patch) | |
| tree | df1f2dcca079f58e868738cbd38c2e09dae14f12 /drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h | |
| parent | 1cd165adf314f6bf25cde58f02f4ff51d01730b0 (diff) | |
| download | linux-9475cc7ac31503521af95e38151e9d856e8ff30b.tar.xz | |
wifi: rtl8xxxu: Fix LED control code of RTL8192FU
Some devices, like the Comfast CF-826F, use LED1, which already works.
Others, like Asus USB-N13 C1, use LED0, which doesn't work correctly.
Write the right values to the LED control registers to make LED0 work
as well.
This is unfortunately tested only with the Comfast CF-826F.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/7a2c3158-3a45-4466-b11e-fc09802b20e2@gmail.com
Diffstat (limited to 'drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h')
| -rw-r--r-- | drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h | 15 |
1 files changed, 15 insertions, 0 deletions
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h index 920ee50e2115..61c0c0ec07b3 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h @@ -146,6 +146,21 @@ #define GPIO_INTM_EDGE_TRIG_IRQ BIT(9) #define REG_LEDCFG0 0x004c +#define LEDCFG0_LED0CM GENMASK(2, 0) +#define LEDCFG0_LED1CM GENMASK(10, 8) +#define LED_MODE_SW_CTRL 0x0 +#define LED_MODE_TX_OR_RX_EVENTS 0x3 +#define LEDCFG0_LED0SV BIT(3) +#define LEDCFG0_LED1SV BIT(11) +#define LED_SW_OFF 0x0 +#define LED_SW_ON 0x1 +#define LEDCFG0_LED0_IO_MODE BIT(7) +#define LEDCFG0_LED1_IO_MODE BIT(15) +#define LED_IO_MODE_OUTPUT 0x0 +#define LED_IO_MODE_INPUT 0x1 +#define LEDCFG0_LED2EN BIT(21) +#define LED_GPIO_DISABLE 0x0 +#define LED_GPIO_ENABLE 0x1 #define LEDCFG0_DPDT_SELECT BIT(23) #define REG_LEDCFG1 0x004d #define LEDCFG1_HW_LED_CONTROL BIT(1) |