Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking merge from David Miller:
 "1) Move ixgbe driver over to purely page based buffering on receive.
     From Alexander Duyck.

  2) Add receive packet steering support to e1000e, from Bruce Allan.

  3) Convert TCP MD5 support over to RCU, from Eric Dumazet.

  4) Reduce cpu usage in handling out-of-order TCP packets on modern
     systems, also from Eric Dumazet.

  5) Support the IP{,V6}_UNICAST_IF socket options, making the wine
     folks happy, from Erich Hoover.

  6) Support VLAN trunking from guests in hyperv driver, from Haiyang
     Zhang.

  7) Support byte-queue-limtis in r8169, from Igor Maravic.

  8) Outline code intended for IP_RECVTOS in IP_PKTOPTIONS existed but
     was never properly implemented, Jiri Benc fixed that.

  9) 64-bit statistics support in r8169 and 8139too, from Junchang Wang.

  10) Support kernel side dump filtering by ctmark in netfilter
      ctnetlink, from Pablo Neira Ayuso.

  11) Support byte-queue-limits in gianfar driver, from Paul Gortmaker.

  12) Add new peek socket options to assist with socket migration, from
      Pavel Emelyanov.

  13) Add sch_plug packet scheduler whose queue is controlled by
      userland daemons using explicit freeze and release commands.  From
      Shriram Rajagopalan.

  14) Fix FCOE checksum offload handling on transmit, from Yi Zou."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1846 commits)
  Fix pppol2tp getsockname()
  Remove printk from rds_sendmsg
  ipv6: fix incorrent ipv6 ipsec packet fragment
  cpsw: Hook up default ndo_change_mtu.
  net: qmi_wwan: fix build error due to cdc-wdm dependecy
  netdev: driver: ethernet: Add TI CPSW driver
  netdev: driver: ethernet: add cpsw address lookup engine support
  phy: add am79c874 PHY support
  mlx4_core: fix race on comm channel
  bonding: send igmp report for its master
  fs_enet: Add MPC5125 FEC support and PHY interface selection
  net: bpf_jit: fix BPF_S_LDX_B_MSH compilation
  net: update the usage of CHECKSUM_UNNECESSARY
  fcoe: use CHECKSUM_UNNECESSARY instead of CHECKSUM_PARTIAL on tx
  net: do not do gso for CHECKSUM_UNNECESSARY in netif_needs_gso
  ixgbe: Fix issues with SR-IOV loopback when flow control is disabled
  net/hyperv: Fix the code handling tx busy
  ixgbe: fix namespace issues when FCoE/DCB is not enabled
  rtlwifi: Remove unused ETH_ADDR_LEN defines
  igbvf: Use ETH_ALEN
  ...

Fix up fairly trivial conflicts in drivers/isdn/gigaset/interface.c and
drivers/net/usb/{Kconfig,qmi_wwan.c} as per David.

13 files changed, 757 insertions, 208 deletions

diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig
index a0a7854facc0..299c3879582d 100644
--- a/drivers/net/wireless/rt2x00/Kconfig
+++ b/drivers/net/wireless/rt2x00/Kconfig
@@ -163,7 +163,7 @@ config RT2800USB_RT53XX
        depends on EXPERIMENTAL
        ---help---
          This adds support for rt53xx wireless chipset family to the
-         rt2800pci driver.
+         rt2800usb driver.
          Supported chips: RT5370
 
 config RT2800USB_UNKNOWN
diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h
index 2571a2fa3d09..063bfa8b91f4 100644
--- a/drivers/net/wireless/rt2x00/rt2800.h
+++ b/drivers/net/wireless/rt2x00/rt2800.h
@@ -68,6 +68,7 @@
 #define RF3322				0x000c
 #define RF3053				0x000d
 #define RF5370				0x5370
+#define RF5372				0x5372
 #define RF5390				0x5390
 
 /*
@@ -965,6 +966,7 @@
  * TX_PIN_CFG:
  */
 #define TX_PIN_CFG			0x1328
+#define TX_PIN_CFG_PA_PE_DISABLE	0xfcfffff0
 #define TX_PIN_CFG_PA_PE_A0_EN		FIELD32(0x00000001)
 #define TX_PIN_CFG_PA_PE_G0_EN		FIELD32(0x00000002)
 #define TX_PIN_CFG_PA_PE_A1_EN		FIELD32(0x00000004)
@@ -985,6 +987,14 @@
 #define TX_PIN_CFG_RFTR_POL		FIELD32(0x00020000)
 #define TX_PIN_CFG_TRSW_EN		FIELD32(0x00040000)
 #define TX_PIN_CFG_TRSW_POL		FIELD32(0x00080000)
+#define TX_PIN_CFG_PA_PE_A2_EN		FIELD32(0x01000000)
+#define TX_PIN_CFG_PA_PE_G2_EN		FIELD32(0x02000000)
+#define TX_PIN_CFG_PA_PE_A2_POL		FIELD32(0x04000000)
+#define TX_PIN_CFG_PA_PE_G2_POL		FIELD32(0x08000000)
+#define TX_PIN_CFG_LNA_PE_A2_EN		FIELD32(0x10000000)
+#define TX_PIN_CFG_LNA_PE_G2_EN		FIELD32(0x20000000)
+#define TX_PIN_CFG_LNA_PE_A2_POL	FIELD32(0x40000000)
+#define TX_PIN_CFG_LNA_PE_G2_POL	FIELD32(0x80000000)
 
 /*
  * TX_BAND_CFG: 0x1 use upper 20MHz, 0x0 use lower 20MHz
@@ -1627,6 +1637,7 @@ struct mac_iveiv_entry {
 
 /*
  * H2M_MAILBOX_CSR: Host-to-MCU Mailbox.
+ * CMD_TOKEN: Command id, 0xff disable status reporting.
  */
 #define H2M_MAILBOX_CSR			0x7010
 #define H2M_MAILBOX_CSR_ARG0		FIELD32(0x000000ff)
@@ -1636,6 +1647,8 @@ struct mac_iveiv_entry {
 
 /*
  * H2M_MAILBOX_CID:
+ * Free slots contain 0xff. MCU will store command's token to lowest free slot.
+ * If all slots are occupied status will be dropped.
  */
 #define H2M_MAILBOX_CID			0x7014
 #define H2M_MAILBOX_CID_CMD0		FIELD32(0x000000ff)
@@ -1645,6 +1658,7 @@ struct mac_iveiv_entry {
 
 /*
  * H2M_MAILBOX_STATUS:
+ * Command status will be saved to same slot as command id.
  */
 #define H2M_MAILBOX_STATUS		0x701c
 
@@ -1796,6 +1810,14 @@ struct mac_iveiv_entry {
 #define RFCSR2_RESCAL_EN		FIELD8(0x80)
 
 /*
+ * RFCSR 3:
+ */
+#define RFCSR3_K			FIELD8(0x0f)
+/* Bits [7-4] for RF3320 (RT3370/RT3390), on other chipsets reserved */
+#define RFCSR3_PA1_BIAS_CCK		FIELD8(0x70);
+#define RFCSR3_PA2_CASCODE_BIAS_CCKK	FIELD8(0x80);
+
+/*
  * FRCSR 5:
  */
 #define RFCSR5_R1			FIELD8(0x0c)
@@ -1811,10 +1833,12 @@ struct mac_iveiv_entry {
  * RFCSR 7:
  */
 #define RFCSR7_RF_TUNING		FIELD8(0x01)
-#define RFCSR7_R02				FIELD8(0x07)
-#define RFCSR7_R3				FIELD8(0x08)
-#define RFCSR7_R45				FIELD8(0x30)
-#define RFCSR7_R67				FIELD8(0xc0)
+#define RFCSR7_BIT1			FIELD8(0x02)
+#define RFCSR7_BIT2			FIELD8(0x04)
+#define RFCSR7_BIT3			FIELD8(0x08)
+#define RFCSR7_BIT4			FIELD8(0x10)
+#define RFCSR7_BIT5			FIELD8(0x20)
+#define RFCSR7_BITS67			FIELD8(0xc0)
 
 /*
  * RFCSR 11:
@@ -1839,6 +1863,11 @@ struct mac_iveiv_entry {
 #define RFCSR15_TX_LO2_EN		FIELD8(0x08)
 
 /*
+ * RFCSR 16:
+ */
+#define RFCSR16_TXMIXER_GAIN		FIELD8(0x07)
+
+/*
  * RFCSR 17:
  */
 #define RFCSR17_TXMIXER_GAIN		FIELD8(0x07)
@@ -1867,6 +1896,13 @@ struct mac_iveiv_entry {
 #define RFCSR23_FREQ_OFFSET		FIELD8(0x7f)
 
 /*
+ * RFCSR 24:
+ */
+#define RFCSR24_TX_AGC_FC		FIELD8(0x1f)
+#define RFCSR24_TX_H20M			FIELD8(0x20)
+#define RFCSR24_TX_CALIB		FIELD8(0x7f)
+
+/*
  * RFCSR 27:
  */
 #define RFCSR27_R1			FIELD8(0x03)
@@ -1887,6 +1923,7 @@ struct mac_iveiv_entry {
  */
 #define RFCSR31_RX_AGC_FC		FIELD8(0x1f)
 #define RFCSR31_RX_H20M			FIELD8(0x20)
+#define RFCSR31_RX_CALIB		FIELD8(0x7f)
 
 /*
  * RFCSR 38:
@@ -2093,6 +2130,12 @@ struct mac_iveiv_entry {
 #define EEPROM_RSSI_A2_LNA_A2		FIELD16(0xff00)
 
 /*
+ * EEPROM TXMIXER GAIN A offset (note overlaps with EEPROM RSSI A2).
+ */
+#define EEPROM_TXMIXER_GAIN_A		0x0026
+#define EEPROM_TXMIXER_GAIN_A_VAL	FIELD16(0x0007)
+
+/*
  * EEPROM EIRP Maximum TX power values(unit: dbm)
  */
 #define EEPROM_EIRP_MAX_TX_POWER	0x0027
@@ -2259,6 +2302,12 @@ struct mac_iveiv_entry {
 
 /*
  * MCU mailbox commands.
+ * MCU_SLEEP - go to power-save mode.
+ *             arg1: 1: save as much power as possible, 0: save less power.
+ *             status: 1: success, 2: already asleep,
+ *                     3: maybe MAC is busy so can't finish this task.
+ * MCU_RADIO_OFF
+ *             arg0: 0: do power-saving, NOT turn off radio.
  */
 #define MCU_SLEEP			0x30
 #define MCU_WAKEUP			0x31
@@ -2279,7 +2328,10 @@ struct mac_iveiv_entry {
 /*
  * MCU mailbox tokens
  */
-#define TOKEN_WAKUP			3
+#define TOKEN_SLEEP			1
+#define TOKEN_RADIO_OFF			2
+#define TOKEN_WAKEUP			3
+
 
 /*
  * DMA descriptor defines.
@@ -2422,4 +2474,23 @@ struct mac_iveiv_entry {
  */
 #define EIRP_MAX_TX_POWER_LIMIT	0x50
 
+/*
+ * Number of TBTT intervals after which we have to adjust
+ * the hw beacon timer.
+ */
+#define BCN_TBTT_OFFSET 64
+
+/*
+ * RT2800 driver data structure
+ */
+struct rt2800_drv_data {
+	u8 calibration_bw20;
+	u8 calibration_bw40;
+	u8 bbp25;
+	u8 bbp26;
+	u8 txmixer_gain_24g;
+	u8 txmixer_gain_5g;
+	unsigned int tbtt_tick;
+};
+
 #endif /* RT2800_H */
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 7bef66def10c..6c0a12ea6a15 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -402,7 +402,8 @@ int rt2800_load_firmware(struct rt2x00_dev *rt2x00dev,
 
 	if (rt2x00_is_pci(rt2x00dev)) {
 		if (rt2x00_rt(rt2x00dev, RT3572) ||
-		    rt2x00_rt(rt2x00dev, RT5390)) {
+		    rt2x00_rt(rt2x00dev, RT5390) ||
+		    rt2x00_rt(rt2x00dev, RT5392)) {
 			rt2800_register_read(rt2x00dev, AUX_CTRL, &reg);
 			rt2x00_set_field32(&reg, AUX_CTRL_FORCE_PCIE_CLK, 1);
 			rt2x00_set_field32(&reg, AUX_CTRL_WAKE_PCIE_EN, 1);
@@ -412,18 +413,6 @@ int rt2800_load_firmware(struct rt2x00_dev *rt2x00dev,
 	}
 
 	/*
-	 * Disable DMA, will be reenabled later when enabling
-	 * the radio.
-	 */
-	rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
-	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0);
-	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_DMA_BUSY, 0);
-	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0);
-	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_RX_DMA_BUSY, 0);
-	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1);
-	rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
-
-	/*
 	 * Write firmware to the device.
 	 */
 	rt2800_drv_write_firmware(rt2x00dev, data, len);
@@ -444,10 +433,21 @@ int rt2800_load_firmware(struct rt2x00_dev *rt2x00dev,
 	}
 
 	/*
+	 * Disable DMA, will be reenabled later when enabling
+	 * the radio.
+	 */
+	rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0);
+	rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
+
+	/*
 	 * Initialize firmware.
 	 */
 	rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
 	rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
+	if (rt2x00_is_usb(rt2x00dev))
+		rt2800_register_write(rt2x00dev, H2M_INT_SRC, 0);
 	msleep(1);
 
 	return 0;
@@ -1646,10 +1646,14 @@ static void rt2800_config_channel_rf3xxx(struct rt2x00_dev *rt2x00dev,
 					 struct rf_channel *rf,
 					 struct channel_info *info)
 {
-	u8 rfcsr;
+	struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
+	u8 rfcsr, calib_tx, calib_rx;
 
 	rt2800_rfcsr_write(rt2x00dev, 2, rf->rf1);
-	rt2800_rfcsr_write(rt2x00dev, 3, rf->rf3);
+
+	rt2800_rfcsr_read(rt2x00dev, 3, &rfcsr);
+	rt2x00_set_field8(&rfcsr, RFCSR3_K, rf->rf3);
+	rt2800_rfcsr_write(rt2x00dev, 3, rfcsr);
 
 	rt2800_rfcsr_read(rt2x00dev, 6, &rfcsr);
 	rt2x00_set_field8(&rfcsr, RFCSR6_R1, rf->rf2);
@@ -1663,16 +1667,82 @@ static void rt2800_config_channel_rf3xxx(struct rt2x00_dev *rt2x00dev,
 	rt2x00_set_field8(&rfcsr, RFCSR13_TX_POWER, info->default_power2);
 	rt2800_rfcsr_write(rt2x00dev, 13, rfcsr);
 
+	rt2800_rfcsr_read(rt2x00dev, 1, &rfcsr);
+	rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 0);
+	rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 0);
+	if (rt2x00_rt(rt2x00dev, RT3390)) {
+		rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD,
+				  rt2x00dev->default_ant.rx_chain_num == 1);
+		rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD,
+				  rt2x00dev->default_ant.tx_chain_num == 1);
+	} else {
+		rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 0);
+		rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 0);
+		rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 0);
+		rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 0);
+
+		switch (rt2x00dev->default_ant.tx_chain_num) {
+		case 1:
+			rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 1);
+			/* fall through */
+		case 2:
+			rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 1);
+			break;
+		}
+
+		switch (rt2x00dev->default_ant.rx_chain_num) {
+		case 1:
+			rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 1);
+			/* fall through */
+		case 2:
+			rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 1);
+			break;
+		}
+	}
+	rt2800_rfcsr_write(rt2x00dev, 1, rfcsr);
+
+	rt2800_rfcsr_read(rt2x00dev, 30, &rfcsr);
+	rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 1);
+	rt2800_rfcsr_write(rt2x00dev, 30, rfcsr);
+	msleep(1);
+	rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 0);
+	rt2800_rfcsr_write(rt2x00dev, 30, rfcsr);
+
 	rt2800_rfcsr_read(rt2x00dev, 23, &rfcsr);
 	rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset);
 	rt2800_rfcsr_write(rt2x00dev, 23, rfcsr);
 
-	rt2800_rfcsr_write(rt2x00dev, 24,
-			      rt2x00dev->calibration[conf_is_ht40(conf)]);
+	if (rt2x00_rt(rt2x00dev, RT3390)) {
+		calib_tx = conf_is_ht40(conf) ? 0x68 : 0x4f;
+		calib_rx = conf_is_ht40(conf) ? 0x6f : 0x4f;
+	} else {
+		if (conf_is_ht40(conf)) {
+			calib_tx = drv_data->calibration_bw40;
+			calib_rx = drv_data->calibration_bw40;
+		} else {
+			calib_tx = drv_data->calibration_bw20;
+			calib_rx = drv_data->calibration_bw20;
+		}
+	}
+
+	rt2800_rfcsr_read(rt2x00dev, 24, &rfcsr);
+	rt2x00_set_field8(&rfcsr, RFCSR24_TX_CALIB, calib_tx);
+	rt2800_rfcsr_write(rt2x00dev, 24, rfcsr);
+
+	rt2800_rfcsr_read(rt2x00dev, 31, &rfcsr);
+	rt2x00_set_field8(&rfcsr, RFCSR31_RX_CALIB, calib_rx);
+	rt2800_rfcsr_write(rt2x00dev, 31, rfcsr);
 
 	rt2800_rfcsr_read(rt2x00dev, 7, &rfcsr);
 	rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1);
 	rt2800_rfcsr_write(rt2x00dev, 7, rfcsr);
+
+	rt2800_rfcsr_read(rt2x00dev, 30, &rfcsr);
+	rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 1);
+	rt2800_rfcsr_write(rt2x00dev, 30, rfcsr);
+	msleep(1);
+	rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 0);
+	rt2800_rfcsr_write(rt2x00dev, 30, rfcsr);
 }
 
 static void rt2800_config_channel_rf3052(struct rt2x00_dev *rt2x00dev,
@@ -1680,12 +1750,13 @@ static void rt2800_config_channel_rf3052(struct rt2x00_dev *rt2x00dev,
 					 struct rf_channel *rf,
 					 struct channel_info *info)
 {
+	struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
 	u8 rfcsr;
 	u32 reg;
 
 	if (rf->channel <= 14) {
-		rt2800_bbp_write(rt2x00dev, 25, 0x15);
-		rt2800_bbp_write(rt2x00dev, 26, 0x85);
+		rt2800_bbp_write(rt2x00dev, 25, drv_data->bbp25);
+		rt2800_bbp_write(rt2x00dev, 26, drv_data->bbp26);
 	} else {
 		rt2800_bbp_write(rt2x00dev, 25, 0x09);
 		rt2800_bbp_write(rt2x00dev, 26, 0xff);
@@ -1713,8 +1784,7 @@ static void rt2800_config_channel_rf3052(struct rt2x00_dev *rt2x00dev,
 	if (rf->channel <= 14) {
 		rt2x00_set_field8(&rfcsr, RFCSR12_DR0, 3);
 		rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER,
-				(info->default_power1 & 0x3) |
-				((info->default_power1 & 0xC) << 1));
+				  info->default_power1);
 	} else {
 		rt2x00_set_field8(&rfcsr, RFCSR12_DR0, 7);
 		rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER,
@@ -1727,8 +1797,7 @@ static void rt2800_config_channel_rf3052(struct rt2x00_dev *rt2x00dev,
 	if (rf->channel <= 14) {
 		rt2x00_set_field8(&rfcsr, RFCSR13_DR0, 3);
 		rt2x00_set_field8(&rfcsr, RFCSR13_TX_POWER,
-				(info->default_power2 & 0x3) |
-				((info->default_power2 & 0xC) << 1));
+				  info->default_power2);
 	} else {
 		rt2x00_set_field8(&rfcsr, RFCSR13_DR0, 7);
 		rt2x00_set_field8(&rfcsr, RFCSR13_TX_POWER,
@@ -1738,11 +1807,12 @@ static void rt2800_config_channel_rf3052(struct rt2x00_dev *rt2x00dev,
 	rt2800_rfcsr_write(rt2x00dev, 13, rfcsr);
 
 	rt2800_rfcsr_read(rt2x00dev, 1, &rfcsr);
-	rt2x00_set_field8(&rfcsr, RFCSR1_RF_BLOCK_EN, 1);
 	rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 0);
 	rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 0);
 	rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 0);
 	rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 0);
+	rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 0);
+	rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 0);
 	if (test_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags)) {
 		if (rf->channel <= 14) {
 			rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 1);
@@ -1773,10 +1843,13 @@ static void rt2800_config_channel_rf3052(struct rt2x00_dev *rt2x00dev,
 	rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset);
 	rt2800_rfcsr_write(rt2x00dev, 23, rfcsr);
 
-	rt2800_rfcsr_write(rt2x00dev, 24,
-			      rt2x00dev->calibration[conf_is_ht40(conf)]);
-	rt2800_rfcsr_write(rt2x00dev, 31,
-			      rt2x00dev->calibration[conf_is_ht40(conf)]);
+	if (conf_is_ht40(conf)) {
+		rt2800_rfcsr_write(rt2x00dev, 24, drv_data->calibration_bw40);
+		rt2800_rfcsr_write(rt2x00dev, 31, drv_data->calibration_bw40);
+	} else {
+		rt2800_rfcsr_write(rt2x00dev, 24, drv_data->calibration_bw20);
+		rt2800_rfcsr_write(rt2x00dev, 31, drv_data->calibration_bw20);
+	}
 
 	if (rf->channel <= 14) {
 		rt2800_rfcsr_write(rt2x00dev, 7, 0xd8);
@@ -1784,7 +1857,10 @@ static void rt2800_config_channel_rf3052(struct rt2x00_dev *rt2x00dev,
 		rt2800_rfcsr_write(rt2x00dev, 10, 0xf1);
 		rt2800_rfcsr_write(rt2x00dev, 11, 0xb9);
 		rt2800_rfcsr_write(rt2x00dev, 15, 0x53);
-		rt2800_rfcsr_write(rt2x00dev, 16, 0x4c);
+		rfcsr = 0x4c;
+		rt2x00_set_field8(&rfcsr, RFCSR16_TXMIXER_GAIN,
+				  drv_data->txmixer_gain_24g);
+		rt2800_rfcsr_write(rt2x00dev, 16, rfcsr);
 		rt2800_rfcsr_write(rt2x00dev, 17, 0x23);
 		rt2800_rfcsr_write(rt2x00dev, 19, 0x93);
 		rt2800_rfcsr_write(rt2x00dev, 20, 0xb3);
@@ -1793,12 +1869,20 @@ static void rt2800_config_channel_rf3052(struct rt2x00_dev *rt2x00dev,
 		rt2800_rfcsr_write(rt2x00dev, 27, 0x00);
 		rt2800_rfcsr_write(rt2x00dev, 29, 0x9b);
 	} else {
-		rt2800_rfcsr_write(rt2x00dev, 7, 0x14);
+		rt2800_rfcsr_read(rt2x00dev, 7, &rfcsr);
+		rt2x00_set_field8(&rfcsr, RFCSR7_BIT2, 1);
+		rt2x00_set_field8(&rfcsr, RFCSR7_BIT3, 0);
+		rt2x00_set_field8(&rfcsr, RFCSR7_BIT4, 1);
+		rt2x00_set_field8(&rfcsr, RFCSR7_BITS67, 0);
+		rt2800_rfcsr_write(rt2x00dev, 7, rfcsr);
 		rt2800_rfcsr_write(rt2x00dev, 9, 0xc0);
 		rt2800_rfcsr_write(rt2x00dev, 10, 0xf1);
 		rt2800_rfcsr_write(rt2x00dev, 11, 0x00);
 		rt2800_rfcsr_write(rt2x00dev, 15, 0x43);
-		rt2800_rfcsr_write(rt2x00dev, 16, 0x7a);
+		rfcsr = 0x7a;
+		rt2x00_set_field8(&rfcsr, RFCSR16_TXMIXER_GAIN,
+				  drv_data->txmixer_gain_5g);
+		rt2800_rfcsr_write(rt2x00dev, 16, rfcsr);
 		rt2800_rfcsr_write(rt2x00dev, 17, 0x23);
 		if (rf->channel <= 64) {
 			rt2800_rfcsr_write(rt2x00dev, 19, 0xb7);
@@ -1906,7 +1990,8 @@ static void rt2800_config_channel_rf53xx(struct rt2x00_dev *rt2x00dev,
 						   r55_nonbt_rev[idx]);
 				rt2800_rfcsr_write(rt2x00dev, 59,
 						   r59_nonbt_rev[idx]);
-			} else if (rt2x00_rt(rt2x00dev, RT5390)) {
+			} else if (rt2x00_rt(rt2x00dev, RT5390) ||
+					   rt2x00_rt(rt2x00dev, RT5392)) {
 				static const char r59_non_bt[] = {0x8f, 0x8f,
 					0x8f, 0x8f, 0x8f, 0x8f, 0x8f, 0x8d,
 					0x8a, 0x88, 0x88, 0x87, 0x87, 0x86};
@@ -1956,6 +2041,7 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
 		rt2800_config_channel_rf3052(rt2x00dev, conf, rf, info);
 		break;
 	case RF5370:
+	case RF5372:
 	case RF5390:
 		rt2800_config_channel_rf53xx(rt2x00dev, conf, rf, info);
 		break;
@@ -1972,7 +2058,8 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
 	rt2800_bbp_write(rt2x00dev, 86, 0);
 
 	if (rf->channel <= 14) {
-		if (!rt2x00_rt(rt2x00dev, RT5390)) {
+		if (!rt2x00_rt(rt2x00dev, RT5390) &&
+			!rt2x00_rt(rt2x00dev, RT5392)) {
 			if (test_bit(CAPABILITY_EXTERNAL_LNA_BG,
 				     &rt2x00dev->cap_flags)) {
 				rt2800_bbp_write(rt2x00dev, 82, 0x62);
@@ -2414,6 +2501,80 @@ void rt2800_gain_calibration(struct rt2x00_dev *rt2x00dev)
 }
 EXPORT_SYMBOL_GPL(rt2800_gain_calibration);
 
+void rt2800_vco_calibration(struct rt2x00_dev *rt2x00dev)
+{
+	u32	tx_pin;
+	u8	rfcsr;
+
+	/*
+	 * A voltage-controlled oscillator(VCO) is an electronic oscillator
+	 * designed to be controlled in oscillation frequency by a voltage
+	 * input. Maybe the temperature will affect the frequency of
+	 * oscillation to be shifted. The VCO calibration will be called
+	 * periodically to adjust the frequency to be precision.
+	*/
+
+	rt2800_register_read(rt2x00dev, TX_PIN_CFG, &tx_pin);
+	tx_pin &= TX_PIN_CFG_PA_PE_DISABLE;
+	rt2800_register_write(rt2x00dev, TX_PIN_CFG, tx_pin);
+
+	switch (rt2x00dev->chip.rf) {
+	case RF2020:
+	case RF3020:
+	case RF3021:
+	case RF3022:
+	case RF3320:
+	case RF3052:
+		rt2800_rfcsr_read(rt2x00dev, 7, &rfcsr);
+		rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1);
+		rt2800_rfcsr_write(rt2x00dev, 7, rfcsr);
+		break;
+	case RF5370:
+	case RF5372:
+	case RF5390:
+		rt2800_rfcsr_read(rt2x00dev, 3, &rfcsr);
+		rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 1);
+		rt2800_rfcsr_write(rt2x00dev, 3, rfcsr);
+		break;
+	default:
+		return;
+	}
+
+	mdelay(1);
+
+	rt2800_register_read(rt2x00dev, TX_PIN_CFG, &tx_pin);
+	if (rt2x00dev->rf_channel <= 14) {
+		switch (rt2x00dev->default_ant.tx_chain_num) {
+		case 3:
+			rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G2_EN, 1);
+			/* fall through */
+		case 2:
+			rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 1);
+			/* fall through */
+		case 1:
+		default:
+			rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, 1);
+			break;
+		}
+	} else {
+		switch (rt2x00dev->default_ant.tx_chain_num) {
+		case 3:
+			rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A2_EN, 1);
+			/* fall through */
+		case 2:
+			rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN, 1);
+			/* fall through */
+		case 1:
+		default:
+			rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN, 1);
+			break;
+		}
+	}
+	rt2800_register_write(rt2x00dev, TX_PIN_CFG, tx_pin);
+
+}
+EXPORT_SYMBOL_GPL(rt2800_vco_calibration);
+
 static void rt2800_config_retry_limit(struct rt2x00_dev *rt2x00dev,
 				      struct rt2x00lib_conf *libconf)
 {
@@ -2502,7 +2663,8 @@ static u8 rt2800_get_default_vgc(struct rt2x00_dev *rt2x00dev)
 		    rt2x00_rt(rt2x00dev, RT3071) ||
 		    rt2x00_rt(rt2x00dev, RT3090) ||
 		    rt2x00_rt(rt2x00dev, RT3390) ||
-		    rt2x00_rt(rt2x00dev, RT5390))
+		    rt2x00_rt(rt2x00dev, RT5390) ||
+		    rt2x00_rt(rt2x00dev, RT5392))
 			return 0x1c + (2 * rt2x00dev->lna_gain);
 		else
 			return 0x2e + rt2x00dev->lna_gain;
@@ -2637,7 +2799,8 @@ static int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
 	} else if (rt2x00_rt(rt2x00dev, RT3572)) {
 		rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000400);
 		rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
-	} else if (rt2x00_rt(rt2x00dev, RT5390)) {
+	} else if (rt2x00_rt(rt2x00dev, RT5390) ||
+			   rt2x00_rt(rt2x00dev, RT5392)) {
 		rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000404);
 		rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
 		rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
@@ -3013,7 +3176,8 @@ static int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev)
 		     rt2800_wait_bbp_ready(rt2x00dev)))
 		return -EACCES;
 
-	if (rt2x00_rt(rt2x00dev, RT5390)) {
+	if (rt2x00_rt(rt2x00dev, RT5390) ||
+		rt2x00_rt(rt2x00dev, RT5392)) {
 		rt2800_bbp_read(rt2x00dev, 4, &value);
 		rt2x00_set_field8(&value, BBP4_MAC_IF_CTRL, 1);
 		rt2800_bbp_write(rt2x00dev, 4, value);
@@ -3021,19 +3185,22 @@ static int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev)
 
 	if (rt2800_is_305x_soc(rt2x00dev) ||
 	    rt2x00_rt(rt2x00dev, RT3572) ||
-	    rt2x00_rt(rt2x00dev, RT5390))
+	    rt2x00_rt(rt2x00dev, RT5390) ||
+	    rt2x00_rt(rt2x00dev, RT5392))
 		rt2800_bbp_write(rt2x00dev, 31, 0x08);
 
 	rt2800_bbp_write(rt2x00dev, 65, 0x2c);
 	rt2800_bbp_write(rt2x00dev, 66, 0x38);
 
-	if (rt2x00_rt(rt2x00dev, RT5390))
+	if (rt2x00_rt(rt2x00dev, RT5390) ||
+		rt2x00_rt(rt2x00dev, RT5392))
 		rt2800_bbp_write(rt2x00dev, 68, 0x0b);
 
 	if (rt2x00_rt_rev(rt2x00dev, RT2860, REV_RT2860C)) {
 		rt2800_bbp_write(rt2x00dev, 69, 0x16);
 		rt2800_bbp_write(rt2x00dev, 73, 0x12);
-	} else if (rt2x00_rt(rt2x00dev, RT5390)) {
+	} else if (rt2x00_rt(rt2x00dev, RT5390) ||
+			   rt2x00_rt(rt2x00dev, RT5392)) {
 		rt2800_bbp_write(rt2x00dev, 69, 0x12);
 		rt2800_bbp_write(rt2x00dev, 73, 0x13);
 		rt2800_bbp_write(rt2x00dev, 75, 0x46);
@@ -3051,7 +3218,8 @@ static int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev)
 	    rt2x00_rt(rt2x00dev, RT3090) ||
 	    rt2x00_rt(rt2x00dev, RT3390) ||
 	    rt2x00_rt(rt2x00dev, RT3572) ||
-	    rt2x00_rt(rt2x00dev, RT5390)) {
+	    rt2x00_rt(rt2x00dev, RT5390) ||
+	    rt2x00_rt(rt2x00dev, RT5392)) {
 		rt2800_bbp_write(rt2x00dev, 79, 0x13);
 		rt2800_bbp_write(rt2x00dev, 80, 0x05);
 		rt2800_bbp_write(rt2x00dev, 81, 0x33);
@@ -3063,64 +3231,88 @@ static int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev)
 	}
 
 	rt2800_bbp_write(rt2x00dev, 82, 0x62);
-	if (rt2x00_rt(rt2x00dev, RT5390))
+	if (rt2x00_rt(rt2x00dev, RT5390) ||
+		rt2x00_rt(rt2x00dev, RT5392))
 		rt2800_bbp_write(rt2x00dev, 83, 0x7a);
 	else
 		rt2800_bbp_write(rt2x00dev, 83, 0x6a);
 
 	if (rt2x00_rt_rev(rt2x00dev, RT2860, REV_RT2860D))
 		rt2800_bbp_write(rt2x00dev, 84, 0x19);
-	else if (rt2x00_rt(rt2x00dev, RT5390))
+	else if (rt2x00_rt(rt2x00dev, RT5390) ||
+			 rt2x00_rt(rt2x00dev, RT5392))
 		rt2800_bbp_write(rt2x00dev, 84, 0x9a);
 	else
 		rt2800_bbp_write(rt2x00dev, 84, 0x99);
 
-	if (rt2x00_rt(rt2x00dev, RT5390))
+	if (rt2x00_rt(rt2x00dev, RT5390) ||
+		rt2x00_rt(rt2x00dev, RT5392))
 		rt2800_bbp_write(rt2x00dev, 86, 0x38);
 	else
 		rt2800_bbp_write(rt2x00dev, 86, 0x00);
 
+	if (rt2x00_rt(rt2x00dev, RT5392))
+		rt2800_bbp_write(rt2x00dev, 88, 0x90);
+
 	rt2800_bbp_write(rt2x00dev, 91, 0x04);
 
-	if (rt2x00_rt(rt2x00dev, RT5390))
+	if (rt2x00_rt(rt2x00dev, RT5390) ||
+		rt2x00_rt(rt2x00dev, RT5392))
 		rt2800_bbp_write(rt2x00dev, 92, 0x02);
 	else
 		rt2800_bbp_write(rt2x00dev, 92, 0x00);
 
+	if (rt2x00_rt(rt2x00dev, RT5392)) {
+		rt2800_bbp_write(rt2x00dev, 95, 0x9a);
+		rt2800_bbp_write(rt2x00dev, 98, 0x12);
+	}
+
 	if (rt2x00_rt_rev_gte(rt2x00dev, RT3070, REV_RT3070F) ||
 	    rt2x00_rt_rev_gte(rt2x00dev, RT3071, REV_RT3071E) ||
 	    rt2x00_rt_rev_gte(rt2x00dev, RT3090, REV_RT3090E) ||
 	    rt2x00_rt_rev_gte(rt2x00dev, RT3390, REV_RT3390E) ||
 	    rt2x00_rt(rt2x00dev, RT3572) ||
 	    rt2x00_rt(rt2x00dev, RT5390) ||
+	    rt2x00_rt(rt2x00dev, RT5392) ||
 	    rt2800_is_305x_soc(rt2x00dev))
 		rt2800_bbp_write(rt2x00dev, 103, 0xc0);
 	else
 		rt2800_bbp_write(rt2x00dev, 103, 0x00);
 
-	if (rt2x00_rt(rt2x00dev, RT5390))
+	if (rt2x00_rt(rt2x00dev, RT5390) ||
+		rt2x00_rt(rt2x00dev, RT5392))
 		rt2800_bbp_write(rt2x00dev, 104, 0x92);
 
 	if (rt2800_is_305x_soc(rt2x00dev))
 		rt2800_bbp_write(rt2x00dev, 105, 0x01);
-	else if (rt2x00_rt(rt2x00dev, RT5390))
+	else if (rt2x00_rt(rt2x00dev, RT5390) ||
+			 rt2x00_rt(rt2x00dev, RT5392))
 		rt2800_bbp_write(rt2x00dev, 105, 0x3c);
 	else
 		rt2800_bbp_write(rt2x00dev, 105, 0x05);
 
 	if (rt2x00_rt(rt2x00dev, RT5390))
 		rt2800_bbp_write(rt2x00dev, 106, 0x03);
+	else if (rt2x00_rt(rt2x00dev, RT5392))
+		rt2800_bbp_write(rt2x00dev, 106, 0x12);
 	else
 		rt2800_bbp_write(rt2x00dev, 106, 0x35);
 
-	if (rt2x00_rt(rt2x00dev, RT5390))
+	if (rt2x00_rt(rt2x00dev, RT5390) ||
+		rt2x00_rt(rt2x00dev, RT5392))
 		rt2800_bbp_write(rt2x00dev, 128, 0x12);
 
+	if (rt2x00_rt(rt2x00dev, RT5392)) {
+		rt2800_bbp_write(rt2x00dev, 134, 0xd0);
+		rt2800_bbp_write(rt2x00dev, 135, 0xf6);
+	}
+
 	if (rt2x00_rt(rt2x00dev, RT3071) ||
 	    rt2x00_rt(rt2x00dev, RT3090) ||
 	    rt2x00_rt(rt2x00dev, RT3390) ||
 	    rt2x00_rt(rt2x00dev, RT3572) ||
-	    rt2x00_rt(rt2x00dev, RT5390)) {
+	    rt2x00_rt(rt2x00dev, RT5390) ||
+	    rt2x00_rt(rt2x00dev, RT5392)) {
 		rt2800_bbp_read(rt2x00dev, 138, &value);
 
 		rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC_CONF0, &eeprom);
@@ -3132,7 +3324,8 @@ static int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev)
 		rt2800_bbp_write(rt2x00dev, 138, value);
 	}
 
-	if (rt2x00_rt(rt2x00dev, RT5390)) {
+	if (rt2x00_rt(rt2x00dev, RT5390) ||
+		rt2x00_rt(rt2x00dev, RT5392)) {
 		int ant, div_mode;
 
 		rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1, &eeprom);
@@ -3247,6 +3440,7 @@ static u8 rt2800_init_rx_filter(struct rt2x00_dev *rt2x00dev,
 
 static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
 {
+	struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
 	u8 rfcsr;
 	u8 bbp;
 	u32 reg;
@@ -3258,13 +3452,15 @@ static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
 	    !rt2x00_rt(rt2x00dev, RT3390) &&
 	    !rt2x00_rt(rt2x00dev, RT3572) &&
 	    !rt2x00_rt(rt2x00dev, RT5390) &&
+	    !rt2x00_rt(rt2x00dev, RT5392) &&
 	    !rt2800_is_305x_soc(rt2x00dev))
 		return 0;
 
 	/*
 	 * Init RF calibration.
 	 */
-	if (rt2x00_rt(rt2x00dev, RT5390)) {
+	if (rt2x00_rt(rt2x00dev, RT5390) ||
+		rt2x00_rt(rt2x00dev, RT5392)) {
 		rt2800_rfcsr_read(rt2x00dev, 2, &rfcsr);
 		rt2x00_set_field8(&rfcsr, RFCSR2_RESCAL_EN, 1);
 		rt2800_rfcsr_write(rt2x00dev, 2, rfcsr);
@@ -3482,6 +3678,66 @@ static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
 			rt2800_rfcsr_write(rt2x00dev, 61, 0xdd);
 		rt2800_rfcsr_write(rt2x00dev, 62, 0x00);
 		rt2800_rfcsr_write(rt2x00dev, 63, 0x00);
+	}	else if (rt2x00_rt(rt2x00dev, RT5392)) {
+			rt2800_rfcsr_write(rt2x00dev, 1, 0x17);
+			rt2800_rfcsr_write(rt2x00dev, 2, 0x80);
+			rt2800_rfcsr_write(rt2x00dev, 3, 0x88);
+			rt2800_rfcsr_write(rt2x00dev, 5, 0x10);
+			rt2800_rfcsr_write(rt2x00dev, 6, 0xe0);
+			rt2800_rfcsr_write(rt2x00dev, 7, 0x00);
+			rt2800_rfcsr_write(rt2x00dev, 10, 0x53);
+			rt2800_rfcsr_write(rt2x00dev, 11, 0x4a);
+			rt2800_rfcsr_write(rt2x00dev, 12, 0x46);
+			rt2800_rfcsr_write(rt2x00dev, 13, 0x9f);
+			rt2800_rfcsr_write(rt2x00dev, 14, 0x00);
+			rt2800_rfcsr_write(rt2x00dev, 15, 0x00);
+			rt2800_rfcsr_write(rt2x00dev, 16, 0x00);
+			rt2800_rfcsr_write(rt2x00dev, 18, 0x03);
+			rt2800_rfcsr_write(rt2x00dev, 19, 0x4d);
+			rt2800_rfcsr_write(rt2x00dev, 20, 0x00);
+			rt2800_rfcsr_write(rt2x00dev, 21, 0x8d);
+			rt2800_rfcsr_write(rt2x00dev, 22, 0x20);
+			rt2800_rfcsr_write(rt2x00dev, 23, 0x0b);
+			rt2800_rfcsr_write(rt2x00dev, 24, 0x44);
+			rt2800_rfcsr_write(rt2x00dev, 25, 0x80);
+			rt2800_rfcsr_write(rt2x00dev, 26, 0x82);
+			rt2800_rfcsr_write(rt2x00dev, 27, 0x09);
+			rt2800_rfcsr_write(rt2x00dev, 28, 0x00);
+			rt2800_rfcsr_write(rt2x00dev, 29, 0x10);
+			rt2800_rfcsr_write(rt2x00dev, 30, 0x10);
+			rt2800_rfcsr_write(rt2x00dev, 31, 0x80);
+			rt2800_rfcsr_write(rt2x00dev, 32, 0x20);
+			rt2800_rfcsr_write(rt2x00dev, 33, 0xC0);
+			rt2800_rfcsr_write(rt2x00dev, 34, 0x07);
+			rt2800_rfcsr_write(rt2x00dev, 35, 0x12);
+			rt2800_rfcsr_write(rt2x00dev, 36, 0x00);
+			rt2800_rfcsr_write(rt2x00dev, 37, 0x08);
+			rt2800_rfcsr_write(rt2x00dev, 38, 0x89);
+			rt2800_rfcsr_write(rt2x00dev, 39, 0x1b);
+			rt2800_rfcsr_write(rt2x00dev, 40, 0x0f);
+			rt2800_rfcsr_write(rt2x00dev, 41, 0xbb);
+			rt2800_rfcsr_write(rt2x00dev, 42, 0xd5);
+			rt2800_rfcsr_write(rt2x00dev, 43, 0x9b);
+			rt2800_rfcsr_write(rt2x00dev, 44, 0x0e);
+			rt2800_rfcsr_write(rt2x00dev, 45, 0xa2);
+			rt2800_rfcsr_write(rt2x00dev, 46, 0x73);
+			rt2800_rfcsr_write(rt2x00dev, 47, 0x0c);
+			rt2800_rfcsr_write(rt2x00dev, 48, 0x10);
+			rt2800_rfcsr_write(rt2x00dev, 49, 0x94);
+			rt2800_rfcsr_write(rt2x00dev, 50, 0x94);
+			rt2800_rfcsr_write(rt2x00dev, 51, 0x3a);
+			rt2800_rfcsr_write(rt2x00dev, 52, 0x48);
+			rt2800_rfcsr_write(rt2x00dev, 53, 0x44);
+			rt2800_rfcsr_write(rt2x00dev, 54, 0x38);
+			rt2800_rfcsr_write(rt2x00dev, 55, 0x43);
+			rt2800_rfcsr_write(rt2x00dev, 56, 0xa1);
+			rt2800_rfcsr_write(rt2x00dev, 57, 0x00);
+			rt2800_rfcsr_write(rt2x00dev, 58, 0x39);
+			rt2800_rfcsr_write(rt2x00dev, 59, 0x07);
+			rt2800_rfcsr_write(rt2x00dev, 60, 0x45);
+			rt2800_rfcsr_write(rt2x00dev, 61, 0x91);
+			rt2800_rfcsr_write(rt2x00dev, 62, 0x39);
+			rt2800_rfcsr_write(rt2x00dev, 63, 0x07);
 	}
 
 	if (rt2x00_rt_rev_lt(rt2x00dev, RT3070, REV_RT3070F)) {
@@ -3535,21 +3791,28 @@ static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
 	 * Set RX Filter calibration for 20MHz and 40MHz
 	 */
 	if (rt2x00_rt(rt2x00dev, RT3070)) {
-		rt2x00dev->calibration[0] =
+		drv_data->calibration_bw20 =
 			rt2800_init_rx_filter(rt2x00dev, false, 0x07, 0x16);
-		rt2x00dev->calibration[1] =
+		drv_data->calibration_bw40 =
 			rt2800_init_rx_filter(rt2x00dev, true, 0x27, 0x19);
 	} else if (rt2x00_rt(rt2x00dev, RT3071) ||
 		   rt2x00_rt(rt2x00dev, RT3090) ||
 		   rt2x00_rt(rt2x00dev, RT3390) ||
 		   rt2x00_rt(rt2x00dev, RT3572)) {
-		rt2x00dev->calibration[0] =
+		drv_data->calibration_bw20 =
 			rt2800_init_rx_filter(rt2x00dev, false, 0x07, 0x13);
-		rt2x00dev->calibration[1] =
+		drv_data->calibration_bw40 =
 			rt2800_init_rx_filter(rt2x00dev, true, 0x27, 0x15);
 	}
 
-	if (!rt2x00_rt(rt2x00dev, RT5390)) {
+	/*
+	 * Save BBP 25 & 26 values for later use in channel switching
+	 */
+	rt2800_bbp_read(rt2x00dev, 25, &drv_data->bbp25);
+	rt2800_bbp_read(rt2x00dev, 26, &drv_data->bbp26);
+
+	if (!rt2x00_rt(rt2x00dev, RT5390) &&
+		!rt2x00_rt(rt2x00dev, RT5392)) {
 		/*
 		 * Set back to initial state
 		 */
@@ -3577,7 +3840,8 @@ static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
 	rt2x00_set_field32(&reg, OPT_14_CSR_BIT0, 1);
 	rt2800_register_write(rt2x00dev, OPT_14_CSR, reg);
 
-	if (!rt2x00_rt(rt2x00dev, RT5390)) {
+	if (!rt2x00_rt(rt2x00dev, RT5390) &&
+		!rt2x00_rt(rt2x00dev, RT5392)) {
 		rt2800_rfcsr_read(rt2x00dev, 17, &rfcsr);
 		rt2x00_set_field8(&rfcsr, RFCSR17_TX_LO1_EN, 0);
 		if (rt2x00_rt(rt2x00dev, RT3070) ||
@@ -3588,11 +3852,8 @@ static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
 				      &rt2x00dev->cap_flags))
 				rt2x00_set_field8(&rfcsr, RFCSR17_R, 1);
 		}
-		rt2x00_eeprom_read(rt2x00dev, EEPROM_TXMIXER_GAIN_BG, &eeprom);
-		if (rt2x00_get_field16(eeprom, EEPROM_TXMIXER_GAIN_BG_VAL) >= 1)
-			rt2x00_set_field8(&rfcsr, RFCSR17_TXMIXER_GAIN,
-					rt2x00_get_field16(eeprom,
-						EEPROM_TXMIXER_GAIN_BG_VAL));
+		rt2x00_set_field8(&rfcsr, RFCSR17_TXMIXER_GAIN,
+				  drv_data->txmixer_gain_24g);
 		rt2800_rfcsr_write(rt2x00dev, 17, rfcsr);
 	}
 
@@ -3645,7 +3906,8 @@ static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
 		rt2800_rfcsr_write(rt2x00dev, 27, rfcsr);
 	}
 
-	if (rt2x00_rt(rt2x00dev, RT5390)) {
+	if (rt2x00_rt(rt2x00dev, RT5390) ||
+		rt2x00_rt(rt2x00dev, RT5392)) {
 		rt2800_rfcsr_read(rt2x00dev, 38, &rfcsr);
 		rt2x00_set_field8(&rfcsr, RFCSR38_RX_LO1_EN, 0);
 		rt2800_rfcsr_write(rt2x00dev, 38, rfcsr);
@@ -3800,6 +4062,7 @@ EXPORT_SYMBOL_GPL(rt2800_read_eeprom_efuse);
 
 int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev)
 {
+	struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
 	u16 word;
 	u8 *mac;
 	u8 default_lna_gain;
@@ -3883,6 +4146,14 @@ int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev)
 		rt2x00_set_field16(&word, EEPROM_RSSI_BG_OFFSET1, 0);
 	rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_BG, word);
 
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_TXMIXER_GAIN_BG, &word);
+	if ((word & 0x00ff) != 0x00ff) {
+		drv_data->txmixer_gain_24g =
+			rt2x00_get_field16(word, EEPROM_TXMIXER_GAIN_BG_VAL);
+	} else {
+		drv_data->txmixer_gain_24g = 0;
+	}
+
 	rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &word);
 	if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG2_OFFSET2)) > 10)
 		rt2x00_set_field16(&word, EEPROM_RSSI_BG2_OFFSET2, 0);
@@ -3892,6 +4163,14 @@ int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev)
 				   default_lna_gain);
 	rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_BG2, word);
 
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_TXMIXER_GAIN_A, &word);
+	if ((word & 0x00ff) != 0x00ff) {
+		drv_data->txmixer_gain_5g =
+			rt2x00_get_field16(word, EEPROM_TXMIXER_GAIN_A_VAL);
+	} else {
+		drv_data->txmixer_gain_5g = 0;
+	}
+
 	rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A, &word);
 	if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A_OFFSET0)) > 10)
 		rt2x00_set_field16(&word, EEPROM_RSSI_A_OFFSET0, 0);
@@ -3929,7 +4208,8 @@ int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	 * RT53xx: defined in "EEPROM_CHIP_ID" field
 	 */
 	rt2800_register_read(rt2x00dev, MAC_CSR0, &reg);
-	if (rt2x00_get_field32(reg, MAC_CSR0_CHIPSET) == RT5390)
+	if (rt2x00_get_field32(reg, MAC_CSR0_CHIPSET) == RT5390 ||
+		rt2x00_get_field32(reg, MAC_CSR0_CHIPSET) == RT5392)
 		rt2x00_eeprom_read(rt2x00dev, EEPROM_CHIP_ID, &value);
 	else
 		value = rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RF_TYPE);
@@ -3947,9 +4227,10 @@ int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	case RT3390:
 	case RT3572:
 	case RT5390:
+	case RT5392:
 		break;
 	default:
-		ERROR(rt2x00dev, "Invalid RT chipset detected.\n");
+		ERROR(rt2x00dev, "Invalid RT chipset 0x%04x detected.\n", rt2x00dev->chip.rt);
 		return -ENODEV;
 	}
 
@@ -3965,10 +4246,11 @@ int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	case RF3052:
 	case RF3320:
 	case RF5370:
+	case RF5372:
 	case RF5390:
 		break;
 	default:
-		ERROR(rt2x00dev, "Invalid RF chipset 0x%x detected.\n",
+		ERROR(rt2x00dev, "Invalid RF chipset 0x%04x detected.\n",
 		      rt2x00dev->chip.rf);
 		return -ENODEV;
 	}
@@ -4218,7 +4500,9 @@ int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 	    IEEE80211_HW_SIGNAL_DBM |
 	    IEEE80211_HW_SUPPORTS_PS |
 	    IEEE80211_HW_PS_NULLFUNC_STACK |
-	    IEEE80211_HW_AMPDU_AGGREGATION;
+	    IEEE80211_HW_AMPDU_AGGREGATION |
+	    IEEE80211_HW_REPORTS_TX_ACK_STATUS;
+
 	/*
 	 * Don't set IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING for USB devices
 	 * unless we are capable of sending the buffered frames out after the
@@ -4271,6 +4555,7 @@ int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 		   rt2x00_rf(rt2x00dev, RF3022) ||
 		   rt2x00_rf(rt2x00dev, RF3320) ||
 		   rt2x00_rf(rt2x00dev, RF5370) ||
+		   rt2x00_rf(rt2x00dev, RF5372) ||
 		   rt2x00_rf(rt2x00dev, RF5390)) {
 		spec->num_channels = 14;
 		spec->channels = rf_vals_3x;
@@ -4347,6 +4632,20 @@ int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 		}
 	}
 
+	switch (rt2x00dev->chip.rf) {
+	case RF2020:
+	case RF3020:
+	case RF3021:
+	case RF3022:
+	case RF3320:
+	case RF3052:
+	case RF5370:
+	case RF5372:
+	case RF5390:
+		__set_bit(CAPABILITY_VCO_RECALIBRATION, &rt2x00dev->cap_flags);
+		break;
+	}
+
 	return 0;
 }
 EXPORT_SYMBOL_GPL(rt2800_probe_hw_mode);
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.h b/drivers/net/wireless/rt2x00/rt2800lib.h
index 8c3c281904fe..419e36cb06be 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.h
+++ b/drivers/net/wireless/rt2x00/rt2800lib.h
@@ -184,6 +184,7 @@ void rt2800_reset_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual);
 void rt2800_link_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual,
 		       const u32 count);
 void rt2800_gain_calibration(struct rt2x00_dev *rt2x00dev);
+void rt2800_vco_calibration(struct rt2x00_dev *rt2x00dev);
 
 int rt2800_enable_radio(struct rt2x00_dev *rt2x00dev);
 void rt2800_disable_radio(struct rt2x00_dev *rt2x00dev);
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index dc88baefa72e..0397bbf0ce01 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -480,7 +480,8 @@ static int rt2800pci_init_registers(struct rt2x00_dev *rt2x00dev)
 
 	if (rt2x00_is_pcie(rt2x00dev) &&
 	    (rt2x00_rt(rt2x00dev, RT3572) ||
-	     rt2x00_rt(rt2x00dev, RT5390))) {
+	     rt2x00_rt(rt2x00dev, RT5390) ||
+	     rt2x00_rt(rt2x00dev, RT5392))) {
 		rt2x00pci_register_read(rt2x00dev, AUX_CTRL, &reg);
 		rt2x00_set_field32(&reg, AUX_CTRL_FORCE_PCIE_CLK, 1);
 		rt2x00_set_field32(&reg, AUX_CTRL_WAKE_PCIE_EN, 1);
@@ -489,7 +490,7 @@ static int rt2800pci_init_registers(struct rt2x00_dev *rt2x00dev)
 
 	rt2x00pci_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003);
 
-	rt2x00pci_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
+	reg = 0;
 	rt2x00_set_field32(&reg, MAC_SYS_CTRL_RESET_CSR, 1);
 	rt2x00_set_field32(&reg, MAC_SYS_CTRL_RESET_BBP, 1);
 	rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
@@ -501,11 +502,27 @@ static int rt2800pci_init_registers(struct rt2x00_dev *rt2x00dev)
 
 static int rt2800pci_enable_radio(struct rt2x00_dev *rt2x00dev)
 {
+	int retval;
+
 	if (unlikely(rt2800_wait_wpdma_ready(rt2x00dev) ||
 		     rt2800pci_init_queues(rt2x00dev)))
 		return -EIO;
 
-	return rt2800_enable_radio(rt2x00dev);
+	retval = rt2800_enable_radio(rt2x00dev);
+	if (retval)
+		return retval;
+
+	/* After resume MCU_BOOT_SIGNAL will trash these. */
+	rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0);
+	rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0);
+
+	rt2800_mcu_request(rt2x00dev, MCU_SLEEP, TOKEN_RADIO_OFF, 0xff, 0x02);
+	rt2800pci_mcu_status(rt2x00dev, TOKEN_RADIO_OFF);
+
+	rt2800_mcu_request(rt2x00dev, MCU_WAKEUP, TOKEN_WAKEUP, 0, 0);
+	rt2800pci_mcu_status(rt2x00dev, TOKEN_WAKEUP);
+
+	return retval;
 }
 
 static void rt2800pci_disable_radio(struct rt2x00_dev *rt2x00dev)
@@ -521,14 +538,16 @@ static int rt2800pci_set_state(struct rt2x00_dev *rt2x00dev,
 			       enum dev_state state)
 {
 	if (state == STATE_AWAKE) {
-		rt2800_mcu_request(rt2x00dev, MCU_WAKEUP, TOKEN_WAKUP, 0, 0x02);
-		rt2800pci_mcu_status(rt2x00dev, TOKEN_WAKUP);
+		rt2800_mcu_request(rt2x00dev, MCU_WAKEUP, TOKEN_WAKEUP,
+				   0, 0x02);
+		rt2800pci_mcu_status(rt2x00dev, TOKEN_WAKEUP);
 	} else if (state == STATE_SLEEP) {
 		rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_STATUS,
 					 0xffffffff);
 		rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CID,
 					 0xffffffff);
-		rt2800_mcu_request(rt2x00dev, MCU_SLEEP, 0x01, 0xff, 0x01);
+		rt2800_mcu_request(rt2x00dev, MCU_SLEEP, TOKEN_SLEEP,
+				   0xff, 0x01);
 	}
 
 	return 0;
@@ -541,13 +560,6 @@ static int rt2800pci_set_device_state(struct rt2x00_dev *rt2x00dev,
 
 	switch (state) {
 	case STATE_RADIO_ON:
-		/*
-		 * Before the radio can be enabled, the device first has
-		 * to be woken up. After that it needs a bit of time
-		 * to be fully awake and then the radio can be enabled.
-		 */
-		rt2800pci_set_state(rt2x00dev, STATE_AWAKE);
-		msleep(1);
 		retval = rt2800pci_enable_radio(rt2x00dev);
 		break;
 	case STATE_RADIO_OFF:
@@ -797,7 +809,33 @@ static void rt2800pci_pretbtt_tasklet(unsigned long data)
 static void rt2800pci_tbtt_tasklet(unsigned long data)
 {
 	struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data;
+	struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
+	u32 reg;
+
 	rt2x00lib_beacondone(rt2x00dev);
+
+	if (rt2x00dev->intf_ap_count) {
+		/*
+		 * The rt2800pci hardware tbtt timer is off by 1us per tbtt
+		 * causing beacon skew and as a result causing problems with
+		 * some powersaving clients over time. Shorten the beacon
+		 * interval every 64 beacons by 64us to mitigate this effect.
+		 */
+		if (drv_data->tbtt_tick == (BCN_TBTT_OFFSET - 2)) {
+			rt2x00pci_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
+			rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_INTERVAL,
+					   (rt2x00dev->beacon_int * 16) - 1);
+			rt2x00pci_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+		} else if (drv_data->tbtt_tick == (BCN_TBTT_OFFSET - 1)) {
+			rt2x00pci_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
+			rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_INTERVAL,
+					   (rt2x00dev->beacon_int * 16));
+			rt2x00pci_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+		}
+		drv_data->tbtt_tick++;
+		drv_data->tbtt_tick %= BCN_TBTT_OFFSET;
+	}
+
 	if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
 		rt2800pci_enable_interrupt(rt2x00dev, INT_MASK_CSR_TBTT);
 }
@@ -1050,6 +1088,7 @@ static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = {
 	.reset_tuner		= rt2800_reset_tuner,
 	.link_tuner		= rt2800_link_tuner,
 	.gain_calibration	= rt2800_gain_calibration,
+	.vco_calibration	= rt2800_vco_calibration,
 	.start_queue		= rt2800pci_start_queue,
 	.kick_queue		= rt2800pci_kick_queue,
 	.stop_queue		= rt2800pci_stop_queue,
@@ -1093,6 +1132,7 @@ static const struct data_queue_desc rt2800pci_queue_bcn = {
 
 static const struct rt2x00_ops rt2800pci_ops = {
 	.name			= KBUILD_MODNAME,
+	.drv_data_size		= sizeof(struct rt2800_drv_data),
 	.max_sta_intf		= 1,
 	.max_ap_intf		= 8,
 	.eeprom_size		= EEPROM_SIZE,
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 262ee9eefb6f..cd490abced91 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -114,45 +114,103 @@ static bool rt2800usb_txstatus_pending(struct rt2x00_dev *rt2x00dev)
 	return false;
 }
 
+static inline bool rt2800usb_entry_txstatus_timeout(struct queue_entry *entry)
+{
+	bool tout;
+
+	if (!test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags))
+		return false;
+
+	tout = time_after(jiffies, entry->last_action + msecs_to_jiffies(100));
+	if (unlikely(tout))
+		WARNING(entry->queue->rt2x00dev,
+			"TX status timeout for entry %d in queue %d\n",
+			entry->entry_idx, entry->queue->qid);
+	return tout;
+
+}
+
+static bool rt2800usb_txstatus_timeout(struct rt2x00_dev *rt2x00dev)
+{
+	struct data_queue *queue;
+	struct queue_entry *entry;
+
+	tx_queue_for_each(rt2x00dev, queue) {
+		entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
+		if (rt2800usb_entry_txstatus_timeout(entry))
+			return true;
+	}
+	return false;
+}
+
 static bool rt2800usb_tx_sta_fifo_read_completed(struct rt2x00_dev *rt2x00dev,
 						 int urb_status, u32 tx_status)
 {
+	bool valid;
+
 	if (urb_status) {
-		WARNING(rt2x00dev, "rt2x00usb_register_read_async failed: %d\n", urb_status);
-		return false;
+		WARNING(rt2x00dev, "TX status read failed %d\n", urb_status);
+
+		goto stop_reading;
 	}
 
-	/* try to read all TX_STA_FIFO entries before scheduling txdone_work */
-	if (rt2x00_get_field32(tx_status, TX_STA_FIFO_VALID)) {
-		if (!kfifo_put(&rt2x00dev->txstatus_fifo, &tx_status)) {
-			WARNING(rt2x00dev, "TX status FIFO overrun, "
-				"drop tx status report.\n");
-			queue_work(rt2x00dev->workqueue, &rt2x00dev->txdone_work);
-		} else
-			return true;
-	} else if (!kfifo_is_empty(&rt2x00dev->txstatus_fifo)) {
+	valid = rt2x00_get_field32(tx_status, TX_STA_FIFO_VALID);
+	if (valid) {
+		if (!kfifo_put(&rt2x00dev->txstatus_fifo, &tx_status))
+			WARNING(rt2x00dev, "TX status FIFO overrun\n");
+
 		queue_work(rt2x00dev->workqueue, &rt2x00dev->txdone_work);
+
+		/* Reschedule urb to read TX status again instantly */
+		return true;
 	} else if (rt2800usb_txstatus_pending(rt2x00dev)) {
-		mod_timer(&rt2x00dev->txstatus_timer, jiffies + msecs_to_jiffies(2));
+		/* Read register after 250 us */
+		hrtimer_start(&rt2x00dev->txstatus_timer, ktime_set(0, 250000),
+			      HRTIMER_MODE_REL);
+		return false;
 	}
 
-	return false;
+stop_reading:
+	clear_bit(TX_STATUS_READING, &rt2x00dev->flags);
+	/*
+	 * There is small race window above, between txstatus pending check and
+	 * clear_bit someone could do rt2x00usb_interrupt_txdone, so recheck
+	 * here again if status reading is needed.
+	 */
+	if (rt2800usb_txstatus_pending(rt2x00dev) &&
+	    test_and_set_bit(TX_STATUS_READING, &rt2x00dev->flags))
+		return true;
+	else
+		return false;
+}
+
+static void rt2800usb_async_read_tx_status(struct rt2x00_dev *rt2x00dev)
+{
+
+	if (test_and_set_bit(TX_STATUS_READING, &rt2x00dev->flags))
+		return;
+
+	/* Read TX_STA_FIFO register after 500 us */
+	hrtimer_start(&rt2x00dev->txstatus_timer, ktime_set(0, 500000),
+		      HRTIMER_MODE_REL);
 }
 
 static void rt2800usb_tx_dma_done(struct queue_entry *entry)
 {
 	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
 
-	rt2x00usb_register_read_async(rt2x00dev, TX_STA_FIFO,
-				      rt2800usb_tx_sta_fifo_read_completed);
+	rt2800usb_async_read_tx_status(rt2x00dev);
 }
 
-static void rt2800usb_tx_sta_fifo_timeout(unsigned long data)
+static enum hrtimer_restart rt2800usb_tx_sta_fifo_timeout(struct hrtimer *timer)
 {
-	struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data;
+	struct rt2x00_dev *rt2x00dev =
+	    container_of(timer, struct rt2x00_dev, txstatus_timer);
 
 	rt2x00usb_register_read_async(rt2x00dev, TX_STA_FIFO,
 				      rt2800usb_tx_sta_fifo_read_completed);
+
+	return HRTIMER_NORESTART;
 }
 
 /*
@@ -226,9 +284,7 @@ static int rt2800usb_init_registers(struct rt2x00_dev *rt2x00dev)
 	rt2x00usb_register_read(rt2x00dev, PBF_SYS_CTRL, &reg);
 	rt2x00usb_register_write(rt2x00dev, PBF_SYS_CTRL, reg & ~0x00002000);
 
-	rt2x00usb_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003);
-
-	rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
+	reg = 0;
 	rt2x00_set_field32(&reg, MAC_SYS_CTRL_RESET_CSR, 1);
 	rt2x00_set_field32(&reg, MAC_SYS_CTRL_RESET_BBP, 1);
 	rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
@@ -440,35 +496,26 @@ static int rt2800usb_get_tx_data_len(struct queue_entry *entry)
 /*
  * TX control handlers
  */
-static bool rt2800usb_txdone_entry_check(struct queue_entry *entry, u32 reg)
+static enum txdone_entry_desc_flags
+rt2800usb_txdone_entry_check(struct queue_entry *entry, u32 reg)
 {
 	__le32 *txwi;
 	u32 word;
 	int wcid, ack, pid;
-	int tx_wcid, tx_ack, tx_pid;
-
-	if (test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags) ||
-	    !test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags)) {
-		WARNING(entry->queue->rt2x00dev,
-			"Data pending for entry %u in queue %u\n",
-			entry->entry_idx, entry->queue->qid);
-		cond_resched();
-		return false;
-	}
-
-	wcid	= rt2x00_get_field32(reg, TX_STA_FIFO_WCID);
-	ack	= rt2x00_get_field32(reg, TX_STA_FIFO_TX_ACK_REQUIRED);
-	pid	= rt2x00_get_field32(reg, TX_STA_FIFO_PID_TYPE);
+	int tx_wcid, tx_ack, tx_pid, is_agg;
 
 	/*
 	 * This frames has returned with an IO error,
 	 * so the status report is not intended for this
 	 * frame.
 	 */
-	if (test_bit(ENTRY_DATA_IO_FAILED, &entry->flags)) {
-		rt2x00lib_txdone_noinfo(entry, TXDONE_FAILURE);
-		return false;
-	}
+	if (test_bit(ENTRY_DATA_IO_FAILED, &entry->flags))
+		return TXDONE_FAILURE;
+
+	wcid	= rt2x00_get_field32(reg, TX_STA_FIFO_WCID);
+	ack	= rt2x00_get_field32(reg, TX_STA_FIFO_TX_ACK_REQUIRED);
+	pid	= rt2x00_get_field32(reg, TX_STA_FIFO_PID_TYPE);
+	is_agg	= rt2x00_get_field32(reg, TX_STA_FIFO_TX_AGGRE);
 
 	/*
 	 * Validate if this TX status report is intended for
@@ -481,15 +528,14 @@ static bool rt2800usb_txdone_entry_check(struct queue_entry *entry, u32 reg)
 	tx_ack  = rt2x00_get_field32(word, TXWI_W1_ACK);
 	tx_pid  = rt2x00_get_field32(word, TXWI_W1_PACKETID);
 
-	if ((wcid != tx_wcid) || (ack != tx_ack) || (pid != tx_pid)) {
+	if (wcid != tx_wcid || ack != tx_ack || (!is_agg && pid != tx_pid)) {
 		WARNING(entry->queue->rt2x00dev,
 			"TX status report missed for queue %d entry %d\n",
-		entry->queue->qid, entry->entry_idx);
-		rt2x00lib_txdone_noinfo(entry, TXDONE_UNKNOWN);
-		return false;
+			entry->queue->qid, entry->entry_idx);
+		return TXDONE_UNKNOWN;
 	}
 
-	return true;
+	return TXDONE_SUCCESS;
 }
 
 static void rt2800usb_txdone(struct rt2x00_dev *rt2x00dev)
@@ -498,47 +544,44 @@ static void rt2800usb_txdone(struct rt2x00_dev *rt2x00dev)
 	struct queue_entry *entry;
 	u32 reg;
 	u8 qid;
+	enum txdone_entry_desc_flags done_status;
 
 	while (kfifo_get(&rt2x00dev->txstatus_fifo, &reg)) {
-
-		/* TX_STA_FIFO_PID_QUEUE is a 2-bit field, thus
-		 * qid is guaranteed to be one of the TX QIDs
+		/*
+		 * TX_STA_FIFO_PID_QUEUE is a 2-bit field, thus qid is
+		 * guaranteed to be one of the TX QIDs .
 		 */
 		qid = rt2x00_get_field32(reg, TX_STA_FIFO_PID_QUEUE);
 		queue = rt2x00queue_get_tx_queue(rt2x00dev, qid);
-		if (unlikely(!queue)) {
-			WARNING(rt2x00dev, "Got TX status for an unavailable "
+
+		if (unlikely(rt2x00queue_empty(queue))) {
+			WARNING(rt2x00dev, "Got TX status for an empty "
 					   "queue %u, dropping\n", qid);
-			continue;
+			break;
 		}
 
-		/*
-		 * Inside each queue, we process each entry in a chronological
-		 * order. We first check that the queue is not empty.
-		 */
-		entry = NULL;
-		while (!rt2x00queue_empty(queue)) {
-			entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
-			if (rt2800usb_txdone_entry_check(entry, reg))
-				break;
-			entry = NULL;
+		entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
+
+		if (unlikely(test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags) ||
+			     !test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags))) {
+			WARNING(rt2x00dev, "Data pending for entry %u "
+					   "in queue %u\n", entry->entry_idx, qid);
+			break;
 		}
 
-		if (entry)
-			rt2800_txdone_entry(entry, reg,
-					    rt2800usb_get_txwi(entry));
+		done_status = rt2800usb_txdone_entry_check(entry, reg);
+		if (likely(done_status == TXDONE_SUCCESS))
+			rt2800_txdone_entry(entry, reg, rt2800usb_get_txwi(entry));
+		else
+			rt2x00lib_txdone_noinfo(entry, done_status);
 	}
 }
 
-static void rt2800usb_work_txdone(struct work_struct *work)
+static void rt2800usb_txdone_nostatus(struct rt2x00_dev *rt2x00dev)
 {
-	struct rt2x00_dev *rt2x00dev =
-	    container_of(work, struct rt2x00_dev, txdone_work);
 	struct data_queue *queue;
 	struct queue_entry *entry;
 
-	rt2800usb_txdone(rt2x00dev);
-
 	/*
 	 * Process any trailing TX status reports for IO failures,
 	 * we loop until we find the first non-IO error entry. This
@@ -556,20 +599,34 @@ static void rt2800usb_work_txdone(struct work_struct *work)
 
 			if (test_bit(ENTRY_DATA_IO_FAILED, &entry->flags))
 				rt2x00lib_txdone_noinfo(entry, TXDONE_FAILURE);
-			else if (rt2x00queue_status_timeout(entry))
+			else if (rt2800usb_entry_txstatus_timeout(entry))
 				rt2x00lib_txdone_noinfo(entry, TXDONE_UNKNOWN);
 			else
 				break;
 		}
 	}
+}
 
-	/*
-	 * The hw may delay sending the packet after DMA complete
-	 * if the medium is busy, thus the TX_STA_FIFO entry is
-	 * also delayed -> use a timer to retrieve it.
-	 */
-	if (rt2800usb_txstatus_pending(rt2x00dev))
-		mod_timer(&rt2x00dev->txstatus_timer, jiffies + msecs_to_jiffies(2));
+static void rt2800usb_work_txdone(struct work_struct *work)
+{
+	struct rt2x00_dev *rt2x00dev =
+	    container_of(work, struct rt2x00_dev, txdone_work);
+
+	while (!kfifo_is_empty(&rt2x00dev->txstatus_fifo) ||
+	       rt2800usb_txstatus_timeout(rt2x00dev)) {
+
+		rt2800usb_txdone(rt2x00dev);
+
+		rt2800usb_txdone_nostatus(rt2x00dev);
+
+		/*
+		 * The hw may delay sending the packet after DMA complete
+		 * if the medium is busy, thus the TX_STA_FIFO entry is
+		 * also delayed -> use a timer to retrieve it.
+		 */
+		if (rt2800usb_txstatus_pending(rt2x00dev))
+			rt2800usb_async_read_tx_status(rt2x00dev);
+	}
 }
 
 /*
@@ -711,9 +768,7 @@ static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev)
 	__set_bit(REQUIRE_TXSTATUS_FIFO, &rt2x00dev->cap_flags);
 	__set_bit(REQUIRE_PS_AUTOWAKE, &rt2x00dev->cap_flags);
 
-	setup_timer(&rt2x00dev->txstatus_timer,
-		    rt2800usb_tx_sta_fifo_timeout,
-		    (unsigned long) rt2x00dev);
+	rt2x00dev->txstatus_timer.function = rt2800usb_tx_sta_fifo_timeout,
 
 	/*
 	 * Set the rssi offset.
@@ -783,6 +838,7 @@ static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = {
 	.reset_tuner		= rt2800_reset_tuner,
 	.link_tuner		= rt2800_link_tuner,
 	.gain_calibration	= rt2800_gain_calibration,
+	.vco_calibration	= rt2800_vco_calibration,
 	.watchdog		= rt2800usb_watchdog,
 	.start_queue		= rt2800usb_start_queue,
 	.kick_queue		= rt2x00usb_kick_queue,
@@ -814,7 +870,7 @@ static const struct data_queue_desc rt2800usb_queue_rx = {
 };
 
 static const struct data_queue_desc rt2800usb_queue_tx = {
-	.entry_num		= 64,
+	.entry_num		= 16,
 	.data_size		= AGGREGATION_SIZE,
 	.desc_size		= TXINFO_DESC_SIZE + TXWI_DESC_SIZE,
 	.priv_size		= sizeof(struct queue_entry_priv_usb),
@@ -829,6 +885,7 @@ static const struct data_queue_desc rt2800usb_queue_bcn = {
 
 static const struct rt2x00_ops rt2800usb_ops = {
 	.name			= KBUILD_MODNAME,
+	.drv_data_size		= sizeof(struct rt2800_drv_data),
 	.max_sta_intf		= 1,
 	.max_ap_intf		= 8,
 	.eeprom_size		= EEPROM_SIZE,
@@ -922,6 +979,7 @@ static struct usb_device_id rt2800usb_device_table[] = {
 	{ USB_DEVICE(0x07d1, 0x3c13) },
 	{ USB_DEVICE(0x07d1, 0x3c15) },
 	{ USB_DEVICE(0x07d1, 0x3c16) },
+	{ USB_DEVICE(0x2001, 0x3c1b) },
 	/* Draytek */
 	{ USB_DEVICE(0x07fa, 0x7712) },
 	/* DVICO */
@@ -1101,12 +1159,26 @@ static struct usb_device_id rt2800usb_device_table[] = {
 	{ USB_DEVICE(0x5a57, 0x0284) },
 #endif
 #ifdef CONFIG_RT2800USB_RT53XX
+	/* Alpha */
+	{ USB_DEVICE(0x2001, 0x3c15) },
+	{ USB_DEVICE(0x2001, 0x3c19) },
+	/* Arcadyan */
+	{ USB_DEVICE(0x043e, 0x7a12) },
 	/* Azurewave */
 	{ USB_DEVICE(0x13d3, 0x3329) },
 	{ USB_DEVICE(0x13d3, 0x3365) },
+	/* LG innotek */
+	{ USB_DEVICE(0x043e, 0x7a22) },
+	/* Panasonic */
+	{ USB_DEVICE(0x04da, 0x1801) },
+	{ USB_DEVICE(0x04da, 0x1800) },
+	/* Philips */
+	{ USB_DEVICE(0x0471, 0x2104) },
 	/* Ralink */
 	{ USB_DEVICE(0x148f, 0x5370) },
 	{ USB_DEVICE(0x148f, 0x5372) },
+	/* Unknown */
+	{ USB_DEVICE(0x04da, 0x23f6) },
 #endif
 #ifdef CONFIG_RT2800USB_UNKNOWN
 	/*
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index b03b22c47b18..471f87cab4ab 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -38,7 +38,7 @@
 #include <linux/etherdevice.h>
 #include <linux/input-polldev.h>
 #include <linux/kfifo.h>
-#include <linux/timer.h>
+#include <linux/hrtimer.h>
 
 #include <net/mac80211.h>
 
@@ -192,6 +192,7 @@ struct rt2x00_chip {
 #define RT3593		0x3593
 #define RT3883		0x3883	/* WSOC */
 #define RT5390		0x5390  /* 2.4GHz */
+#define RT5392		0x5392  /* 2.4GHz */
 
 	u16 rf;
 	u16 rev;
@@ -355,6 +356,11 @@ struct link {
 	 * Work structure for scheduling periodic AGC adjustments.
 	 */
 	struct delayed_work agc_work;
+
+	/*
+	 * Work structure for scheduling periodic VCO calibration.
+	 */
+	struct delayed_work vco_work;
 };
 
 enum rt2x00_delayed_flags {
@@ -579,6 +585,7 @@ struct rt2x00lib_ops {
 	void (*link_tuner) (struct rt2x00_dev *rt2x00dev,
 			    struct link_qual *qual, const u32 count);
 	void (*gain_calibration) (struct rt2x00_dev *rt2x00dev);
+	void (*vco_calibration) (struct rt2x00_dev *rt2x00dev);
 
 	/*
 	 * Data queue handlers.
@@ -647,6 +654,7 @@ struct rt2x00lib_ops {
  */
 struct rt2x00_ops {
 	const char *name;
+	const unsigned int drv_data_size;
 	const unsigned int max_sta_intf;
 	const unsigned int max_ap_intf;
 	const unsigned int eeprom_size;
@@ -684,6 +692,12 @@ enum rt2x00_state_flags {
 	 */
 	CONFIG_CHANNEL_HT40,
 	CONFIG_POWERSAVING,
+
+	/*
+	 * Mark we currently are sequentially reading TX_STA_FIFO register
+	 * FIXME: this is for only rt2800usb, should go to private data
+	 */
+	TX_STATUS_READING,
 };
 
 /*
@@ -721,6 +735,7 @@ enum rt2x00_capability_flags {
 	CAPABILITY_EXTERNAL_LNA_BG,
 	CAPABILITY_DOUBLE_ANTENNA,
 	CAPABILITY_BT_COEXIST,
+	CAPABILITY_VCO_RECALIBRATION,
 };
 
 /*
@@ -742,6 +757,11 @@ struct rt2x00_dev {
 	const struct rt2x00_ops *ops;
 
 	/*
+	 * Driver data.
+	 */
+	void *drv_data;
+
+	/*
 	 * IEEE80211 control structure.
 	 */
 	struct ieee80211_hw *hw;
@@ -886,18 +906,11 @@ struct rt2x00_dev {
 	u8 rssi_offset;
 
 	/*
-	 * Frequency offset (for rt61pci & rt73usb).
+	 * Frequency offset.
 	 */
 	u8 freq_offset;
 
 	/*
-	 * Calibration information (for rt2800usb & rt2800pci).
-	 * [0] -> BW20
-	 * [1] -> BW40
-	 */
-	u8 calibration[2];
-
-	/*
 	 * Association id.
 	 */
 	u16 aid;
@@ -967,7 +980,7 @@ struct rt2x00_dev {
 	/*
 	 * Timer to ensure tx status reports are read (rt2800usb).
 	 */
-	struct timer_list txstatus_timer;
+	struct hrtimer txstatus_timer;
 
 	/*
 	 * Tasklet for processing tx status reports (rt2800pci).
@@ -979,6 +992,11 @@ struct rt2x00_dev {
 	struct tasklet_struct autowake_tasklet;
 
 	/*
+	 * Used for VCO periodic calibration.
+	 */
+	int rf_channel;
+
+	/*
 	 * Protect the interrupt mask register.
 	 */
 	spinlock_t irqmask_lock;
diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c
index b704e5b183d0..293676bfa571 100644
--- a/drivers/net/wireless/rt2x00/rt2x00config.c
+++ b/drivers/net/wireless/rt2x00/rt2x00config.c
@@ -102,7 +102,7 @@ void rt2x00lib_config_erp(struct rt2x00_dev *rt2x00dev,
 
 	/* Update the AID, this is needed for dynamic PS support */
 	rt2x00dev->aid = bss_conf->assoc ? bss_conf->aid : 0;
-	rt2x00dev->last_beacon = bss_conf->timestamp;
+	rt2x00dev->last_beacon = bss_conf->last_tsf;
 
 	/* Update global beacon interval time, this is needed for PS support */
 	rt2x00dev->beacon_int = bss_conf->beacon_int;
@@ -232,6 +232,9 @@ void rt2x00lib_config(struct rt2x00_dev *rt2x00dev,
 		memcpy(&libconf.channel,
 		       &rt2x00dev->spec.channels_info[hw_value],
 		       sizeof(libconf.channel));
+
+		/* Used for VCO periodic calibration */
+		rt2x00dev->rf_channel = libconf.rf.channel;
 	}
 
 	if (test_bit(REQUIRE_PS_AUTOWAKE, &rt2x00dev->cap_flags) &&
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index fd356b7c0476..fc9901e027c1 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -88,6 +88,8 @@ int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev)
 	rt2x00queue_start_queues(rt2x00dev);
 	rt2x00link_start_tuner(rt2x00dev);
 	rt2x00link_start_agc(rt2x00dev);
+	if (test_bit(CAPABILITY_VCO_RECALIBRATION, &rt2x00dev->cap_flags))
+		rt2x00link_start_vcocal(rt2x00dev);
 
 	/*
 	 * Start watchdog monitoring.
@@ -111,6 +113,8 @@ void rt2x00lib_disable_radio(struct rt2x00_dev *rt2x00dev)
 	 * Stop all queues
 	 */
 	rt2x00link_stop_agc(rt2x00dev);
+	if (test_bit(CAPABILITY_VCO_RECALIBRATION, &rt2x00dev->cap_flags))
+		rt2x00link_stop_vcocal(rt2x00dev);
 	rt2x00link_stop_tuner(rt2x00dev);
 	rt2x00queue_stop_queues(rt2x00dev);
 	rt2x00queue_flush_queues(rt2x00dev, true);
@@ -1125,6 +1129,18 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev)
 {
 	int retval = -ENOMEM;
 
+	/*
+	 * Allocate the driver data memory, if necessary.
+	 */
+	if (rt2x00dev->ops->drv_data_size > 0) {
+		rt2x00dev->drv_data = kzalloc(rt2x00dev->ops->drv_data_size,
+			                      GFP_KERNEL);
+		if (!rt2x00dev->drv_data) {
+			retval = -ENOMEM;
+			goto exit;
+		}
+	}
+
 	spin_lock_init(&rt2x00dev->irqmask_lock);
 	mutex_init(&rt2x00dev->csr_mutex);
 
@@ -1220,7 +1236,7 @@ void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev)
 	cancel_delayed_work_sync(&rt2x00dev->autowakeup_work);
 	cancel_work_sync(&rt2x00dev->sleep_work);
 	if (rt2x00_is_usb(rt2x00dev)) {
-		del_timer_sync(&rt2x00dev->txstatus_timer);
+		hrtimer_cancel(&rt2x00dev->txstatus_timer);
 		cancel_work_sync(&rt2x00dev->rxdone_work);
 		cancel_work_sync(&rt2x00dev->txdone_work);
 	}
@@ -1266,6 +1282,12 @@ void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev)
 	 * Free queue structures.
 	 */
 	rt2x00queue_free(rt2x00dev);
+
+	/*
+	 * Free the driver data.
+	 */
+	if (rt2x00dev->drv_data)
+		kfree(rt2x00dev->drv_data);
 }
 EXPORT_SYMBOL_GPL(rt2x00lib_remove_dev);
 
diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h
index 4cdf247a870d..78bd43b8961f 100644
--- a/drivers/net/wireless/rt2x00/rt2x00lib.h
+++ b/drivers/net/wireless/rt2x00/rt2x00lib.h
@@ -33,6 +33,7 @@
 #define WATCHDOG_INTERVAL	round_jiffies_relative(HZ)
 #define LINK_TUNE_INTERVAL	round_jiffies_relative(HZ)
 #define AGC_INTERVAL		round_jiffies_relative(4 * HZ)
+#define VCO_INTERVAL		round_jiffies_relative(10 * HZ) /* 10 sec */
 
 /*
  * rt2x00_rate: Per rate device information
@@ -278,12 +279,24 @@ void rt2x00link_stop_watchdog(struct rt2x00_dev *rt2x00dev);
 void rt2x00link_start_agc(struct rt2x00_dev *rt2x00dev);
 
 /**
+ * rt2x00link_start_vcocal - Start periodic VCO calibration
+ * @rt2x00dev: Pointer to &struct rt2x00_dev.
+ */
+void rt2x00link_start_vcocal(struct rt2x00_dev *rt2x00dev);
+
+/**
  * rt2x00link_stop_agc - Stop periodic gain calibration
  * @rt2x00dev: Pointer to &struct rt2x00_dev.
  */
 void rt2x00link_stop_agc(struct rt2x00_dev *rt2x00dev);
 
 /**
+ * rt2x00link_stop_vcocal - Stop periodic VCO calibration
+ * @rt2x00dev: Pointer to &struct rt2x00_dev.
+ */
+void rt2x00link_stop_vcocal(struct rt2x00_dev *rt2x00dev);
+
+/**
  * rt2x00link_register - Initialize link tuning & watchdog functionality
  * @rt2x00dev: Pointer to &struct rt2x00_dev.
  *
diff --git a/drivers/net/wireless/rt2x00/rt2x00link.c b/drivers/net/wireless/rt2x00/rt2x00link.c
index ea10b0068f82..8368aab86f28 100644
--- a/drivers/net/wireless/rt2x00/rt2x00link.c
+++ b/drivers/net/wireless/rt2x00/rt2x00link.c
@@ -447,11 +447,27 @@ void rt2x00link_start_agc(struct rt2x00_dev *rt2x00dev)
 					     AGC_INTERVAL);
 }
 
+void rt2x00link_start_vcocal(struct rt2x00_dev *rt2x00dev)
+{
+	struct link *link = &rt2x00dev->link;
+
+	if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) &&
+	    rt2x00dev->ops->lib->vco_calibration)
+		ieee80211_queue_delayed_work(rt2x00dev->hw,
+					     &link->vco_work,
+					     VCO_INTERVAL);
+}
+
 void rt2x00link_stop_agc(struct rt2x00_dev *rt2x00dev)
 {
 	cancel_delayed_work_sync(&rt2x00dev->link.agc_work);
 }
 
+void rt2x00link_stop_vcocal(struct rt2x00_dev *rt2x00dev)
+{
+	cancel_delayed_work_sync(&rt2x00dev->link.vco_work);
+}
+
 static void rt2x00link_agc(struct work_struct *work)
 {
 	struct rt2x00_dev *rt2x00dev =
@@ -473,9 +489,32 @@ static void rt2x00link_agc(struct work_struct *work)
 					     AGC_INTERVAL);
 }
 
+static void rt2x00link_vcocal(struct work_struct *work)
+{
+	struct rt2x00_dev *rt2x00dev =
+	    container_of(work, struct rt2x00_dev, link.vco_work.work);
+	struct link *link = &rt2x00dev->link;
+
+	/*
+	 * When the radio is shutting down we should
+	 * immediately cease the VCO calibration.
+	 */
+	if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
+		return;
+
+	rt2x00dev->ops->lib->vco_calibration(rt2x00dev);
+
+	if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
+		ieee80211_queue_delayed_work(rt2x00dev->hw,
+					     &link->vco_work,
+					     VCO_INTERVAL);
+}
+
 void rt2x00link_register(struct rt2x00_dev *rt2x00dev)
 {
 	INIT_DELAYED_WORK(&rt2x00dev->link.agc_work, rt2x00link_agc);
+	if (test_bit(CAPABILITY_VCO_RECALIBRATION, &rt2x00dev->cap_flags))
+		INIT_DELAYED_WORK(&rt2x00dev->link.vco_work, rt2x00link_vcocal);
 	INIT_DELAYED_WORK(&rt2x00dev->link.watchdog_work, rt2x00link_watchdog);
 	INIT_DELAYED_WORK(&rt2x00dev->link.work, rt2x00link_tuner);
 }
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h
index 349008d1fb28..5f1392c72673 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.h
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.h
@@ -636,18 +636,6 @@ static inline int rt2x00queue_threshold(struct data_queue *queue)
 {
 	return rt2x00queue_available(queue) < queue->threshold;
 }
-
-/**
- * rt2x00queue_status_timeout - Check if a timeout occurred for STATUS reports
- * @entry: Queue entry to check.
- */
-static inline int rt2x00queue_status_timeout(struct queue_entry *entry)
-{
-	if (!test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags))
-		return false;
-	return time_after(jiffies, entry->last_action + msecs_to_jiffies(100));
-}
-
 /**
  * rt2x00queue_dma_timeout - Check if a timeout occurred for DMA transfers
  * @entry: Queue entry to check.
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c
index 2eea3866504d..66094eb21b61 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.c
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.c
@@ -526,22 +526,6 @@ static void rt2x00usb_watchdog_tx_dma(struct data_queue *queue)
 	rt2x00queue_flush_queue(queue, true);
 }
 
-static void rt2x00usb_watchdog_tx_status(struct data_queue *queue)
-{
-	WARNING(queue->rt2x00dev, "TX queue %d status timed out,"
-		" invoke forced tx handler\n", queue->qid);
-
-	queue_work(queue->rt2x00dev->workqueue, &queue->rt2x00dev->txdone_work);
-}
-
-static int rt2x00usb_status_timeout(struct data_queue *queue)
-{
-	struct queue_entry *entry;
-
-	entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
-	return rt2x00queue_status_timeout(entry);
-}
-
 static int rt2x00usb_dma_timeout(struct data_queue *queue)
 {
 	struct queue_entry *entry;
@@ -558,8 +542,6 @@ void rt2x00usb_watchdog(struct rt2x00_dev *rt2x00dev)
 		if (!rt2x00queue_empty(queue)) {
 			if (rt2x00usb_dma_timeout(queue))
 				rt2x00usb_watchdog_tx_dma(queue);
-			if (rt2x00usb_status_timeout(queue))
-				rt2x00usb_watchdog_tx_status(queue);
 		}
 	}
 }
@@ -829,7 +811,8 @@ int rt2x00usb_probe(struct usb_interface *usb_intf,
 
 	INIT_WORK(&rt2x00dev->rxdone_work, rt2x00usb_work_rxdone);
 	INIT_WORK(&rt2x00dev->txdone_work, rt2x00usb_work_txdone);
-	init_timer(&rt2x00dev->txstatus_timer);
+	hrtimer_init(&rt2x00dev->txstatus_timer, CLOCK_MONOTONIC,
+		     HRTIMER_MODE_REL);
 
 	retval = rt2x00usb_alloc_reg(rt2x00dev);
 	if (retval)