Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking merge from David Miller:
 "1) Move ixgbe driver over to purely page based buffering on receive.
     From Alexander Duyck.

  2) Add receive packet steering support to e1000e, from Bruce Allan.

  3) Convert TCP MD5 support over to RCU, from Eric Dumazet.

  4) Reduce cpu usage in handling out-of-order TCP packets on modern
     systems, also from Eric Dumazet.

  5) Support the IP{,V6}_UNICAST_IF socket options, making the wine
     folks happy, from Erich Hoover.

  6) Support VLAN trunking from guests in hyperv driver, from Haiyang
     Zhang.

  7) Support byte-queue-limtis in r8169, from Igor Maravic.

  8) Outline code intended for IP_RECVTOS in IP_PKTOPTIONS existed but
     was never properly implemented, Jiri Benc fixed that.

  9) 64-bit statistics support in r8169 and 8139too, from Junchang Wang.

  10) Support kernel side dump filtering by ctmark in netfilter
      ctnetlink, from Pablo Neira Ayuso.

  11) Support byte-queue-limits in gianfar driver, from Paul Gortmaker.

  12) Add new peek socket options to assist with socket migration, from
      Pavel Emelyanov.

  13) Add sch_plug packet scheduler whose queue is controlled by
      userland daemons using explicit freeze and release commands.  From
      Shriram Rajagopalan.

  14) Fix FCOE checksum offload handling on transmit, from Yi Zou."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1846 commits)
  Fix pppol2tp getsockname()
  Remove printk from rds_sendmsg
  ipv6: fix incorrent ipv6 ipsec packet fragment
  cpsw: Hook up default ndo_change_mtu.
  net: qmi_wwan: fix build error due to cdc-wdm dependecy
  netdev: driver: ethernet: Add TI CPSW driver
  netdev: driver: ethernet: add cpsw address lookup engine support
  phy: add am79c874 PHY support
  mlx4_core: fix race on comm channel
  bonding: send igmp report for its master
  fs_enet: Add MPC5125 FEC support and PHY interface selection
  net: bpf_jit: fix BPF_S_LDX_B_MSH compilation
  net: update the usage of CHECKSUM_UNNECESSARY
  fcoe: use CHECKSUM_UNNECESSARY instead of CHECKSUM_PARTIAL on tx
  net: do not do gso for CHECKSUM_UNNECESSARY in netif_needs_gso
  ixgbe: Fix issues with SR-IOV loopback when flow control is disabled
  net/hyperv: Fix the code handling tx busy
  ixgbe: fix namespace issues when FCoE/DCB is not enabled
  rtlwifi: Remove unused ETH_ADDR_LEN defines
  igbvf: Use ETH_ALEN
  ...

Fix up fairly trivial conflicts in drivers/isdn/gigaset/interface.c and
drivers/net/usb/{Kconfig,qmi_wwan.c} as per David.

1 files changed, 28 insertions, 38 deletions

diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/rf.c b/drivers/net/wireless/rtlwifi/rtl8192se/rf.c
index 0ad50fe44aa2..08c2f5625129 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192se/rf.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/rf.c
@@ -1,6 +1,6 @@
 /******************************************************************************
  *
- * Copyright(c) 2009-2010  Realtek Corporation.
+ * Copyright(c) 2009-2012  Realtek Corporation.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of version 2 of the GNU General Public License as
@@ -27,8 +27,6 @@
  *
  *****************************************************************************/
 
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
 #include "../wifi.h"
 #include "reg.h"
 #include "def.h"
@@ -123,13 +121,13 @@ static void _rtl92s_get_powerbase(struct ieee80211_hw *hw, u8 *p_pwrlevel,
 	}
 
 	if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20_40) {
-		RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD, ("40MHz finalpwr_idx "
-			"(A / B) = 0x%x / 0x%x\n", p_final_pwridx[0],
-			p_final_pwridx[1]));
+		RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+			 "40MHz finalpwr_idx (A / B) = 0x%x / 0x%x\n",
+			 p_final_pwridx[0], p_final_pwridx[1]);
 	} else {
-		RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD, ("20MHz finalpwr_idx "
-			"(A / B) = 0x%x / 0x%x\n", p_final_pwridx[0],
-			 p_final_pwridx[1]));
+		RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+			 "20MHz finalpwr_idx (A / B) = 0x%x / 0x%x\n",
+			 p_final_pwridx[0], p_final_pwridx[1]);
 	}
 }
 
@@ -153,9 +151,8 @@ static void _rtl92s_set_antennadiff(struct ieee80211_hw *hw,
 			ant_pwr_diff = -8;
 
 		RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
-			 ("Antenna Diff from RF-B "
-			"to RF-A = %d (0x%x)\n", ant_pwr_diff,
-			 ant_pwr_diff & 0xf));
+			 "Antenna Diff from RF-B to RF-A = %d (0x%x)\n",
+			 ant_pwr_diff, ant_pwr_diff & 0xf);
 
 		ant_pwr_diff &= 0xf;
 	}
@@ -172,9 +169,8 @@ static void _rtl92s_set_antennadiff(struct ieee80211_hw *hw,
 	rtl_set_bbreg(hw, RFPGA0_TXGAINSTAGE, (BXBTXAGC | BXCTXAGC | BXDTXAGC),
 		      u4reg_val);
 
-	RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
-		 ("Write BCD-Diff(0x%x) = 0x%x\n",
-		 RFPGA0_TXGAINSTAGE, u4reg_val));
+	RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD, "Write BCD-Diff(0x%x) = 0x%x\n",
+		 RFPGA0_TXGAINSTAGE, u4reg_val);
 }
 
 static void _rtl92s_get_txpower_writeval_byregulatory(struct ieee80211_hw *hw,
@@ -201,8 +197,7 @@ static void _rtl92s_get_txpower_writeval_byregulatory(struct ieee80211_hw *hw,
 				((index < 2) ? pwrbase0 : pwrbase1);
 
 		RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
-			 ("RTK better performance, "
-			 "writeval = 0x%x\n", writeval));
+			 "RTK better performance, writeval = 0x%x\n", writeval);
 		break;
 	case 1:
 		/* Realtek regulatory increase power diff defined
@@ -211,8 +206,8 @@ static void _rtl92s_get_txpower_writeval_byregulatory(struct ieee80211_hw *hw,
 			writeval = ((index < 2) ? pwrbase0 : pwrbase1);
 
 			RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
-				 ("Realtek regulatory, "
-				 "40MHz, writeval = 0x%x\n", writeval));
+				 "Realtek regulatory, 40MHz, writeval = 0x%x\n",
+				 writeval);
 		} else {
 			if (rtlphy->pwrgroup_cnt == 1)
 				chnlgroup = 0;
@@ -234,16 +229,15 @@ static void _rtl92s_get_txpower_writeval_byregulatory(struct ieee80211_hw *hw,
 					pwrbase0 : pwrbase1);
 
 			RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
-				 ("Realtek regulatory, "
-				 "20MHz, writeval = 0x%x\n", writeval));
+				 "Realtek regulatory, 20MHz, writeval = 0x%x\n",
+				 writeval);
 		}
 		break;
 	case 2:
 		/* Better regulatory don't increase any power diff */
 		writeval = ((index < 2) ? pwrbase0 : pwrbase1);
 		RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
-			 ("Better regulatory, "
-			 "writeval = 0x%x\n", writeval));
+			 "Better regulatory, writeval = 0x%x\n", writeval);
 		break;
 	case 3:
 		/* Customer defined power diff. increase power diff
@@ -252,14 +246,14 @@ static void _rtl92s_get_txpower_writeval_byregulatory(struct ieee80211_hw *hw,
 
 		if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20_40) {
 			RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
-				("customer's limit, 40MHz = 0x%x\n",
-				rtlefuse->pwrgroup_ht40
-				[RF90_PATH_A][chnl - 1]));
+				 "customer's limit, 40MHz = 0x%x\n",
+				 rtlefuse->pwrgroup_ht40
+				 [RF90_PATH_A][chnl - 1]);
 		} else {
 			RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
-				("customer's limit, 20MHz = 0x%x\n",
-				rtlefuse->pwrgroup_ht20
-				[RF90_PATH_A][chnl - 1]));
+				 "customer's limit, 20MHz = 0x%x\n",
+				 rtlefuse->pwrgroup_ht20
+				 [RF90_PATH_A][chnl - 1]);
 		}
 
 		for (i = 0; i < 4; i++) {
@@ -293,22 +287,19 @@ static void _rtl92s_get_txpower_writeval_byregulatory(struct ieee80211_hw *hw,
 				(pwrdiff_limit[1] << 8) |
 				(pwrdiff_limit[0]);
 		RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
-			 ("Customer's limit = 0x%x\n",
-			 customer_limit));
+			 "Customer's limit = 0x%x\n", customer_limit);
 
 		writeval = customer_limit + ((index < 2) ?
 					     pwrbase0 : pwrbase1);
 		RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
-			 ("Customer, writeval = "
-			 "0x%x\n", writeval));
+			 "Customer, writeval = 0x%x\n", writeval);
 		break;
 	default:
 		chnlgroup = 0;
 		writeval = rtlphy->mcs_txpwrlevel_origoffset[chnlgroup][index] +
 				((index < 2) ? pwrbase0 : pwrbase1);
 		RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
-			 ("RTK better performance, "
-			 "writeval = 0x%x\n", writeval));
+			 "RTK better performance, writeval = 0x%x\n", writeval);
 		break;
 	}
 
@@ -508,7 +499,7 @@ bool rtl92s_phy_rf6052_config(struct ieee80211_hw *hw)
 			break;
 		}
 
-		if (rtstatus != true) {
+		if (!rtstatus) {
 			pr_err("Radio[%d] Fail!!\n", rfpath);
 			goto fail;
 		}
@@ -541,8 +532,7 @@ void rtl92s_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw, u8 bandwidth)
 		break;
 	default:
 		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-			 ("unknown bandwidth: %#X\n",
-			 bandwidth));
+			 "unknown bandwidth: %#X\n", bandwidth);
 		break;
 	}
 }