summaryrefslogtreecommitdiff
path: root/drivers/parport/ieee1284_ops.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-17 02:20:36 +0400
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-17 02:20:36 +0400
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/parport/ieee1284_ops.c
downloadlinux-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.xz
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/parport/ieee1284_ops.c')
-rw-r--r--drivers/parport/ieee1284_ops.c921
1 files changed, 921 insertions, 0 deletions
diff --git a/drivers/parport/ieee1284_ops.c b/drivers/parport/ieee1284_ops.c
new file mode 100644
index 000000000000..6624278c6ed8
--- /dev/null
+++ b/drivers/parport/ieee1284_ops.c
@@ -0,0 +1,921 @@
+/* IEEE-1284 operations for parport.
+ *
+ * This file is for generic IEEE 1284 operations. The idea is that
+ * they are used by the low-level drivers. If they have a special way
+ * of doing something, they can provide their own routines (and put
+ * the function pointers in port->ops); if not, they can just use these
+ * as a fallback.
+ *
+ * Note: Make no assumptions about hardware or architecture in this file!
+ *
+ * Author: Tim Waugh <tim@cyberelk.demon.co.uk>
+ * Fixed AUTOFD polarity in ecp_forward_to_reverse(). Fred Barnes, 1999
+ * Software emulated EPP fixes, Fred Barnes, 04/2001.
+ */
+
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/parport.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <asm/uaccess.h>
+
+#undef DEBUG /* undef me for production */
+
+#ifdef CONFIG_LP_CONSOLE
+#undef DEBUG /* Don't want a garbled console */
+#endif
+
+#ifdef DEBUG
+#define DPRINTK(stuff...) printk (stuff)
+#else
+#define DPRINTK(stuff...)
+#endif
+
+/*** *
+ * One-way data transfer functions. *
+ * ***/
+
+/* Compatibility mode. */
+size_t parport_ieee1284_write_compat (struct parport *port,
+ const void *buffer, size_t len,
+ int flags)
+{
+ int no_irq = 1;
+ ssize_t count = 0;
+ const unsigned char *addr = buffer;
+ unsigned char byte;
+ struct pardevice *dev = port->physport->cad;
+ unsigned char ctl = (PARPORT_CONTROL_SELECT
+ | PARPORT_CONTROL_INIT);
+
+ if (port->irq != PARPORT_IRQ_NONE) {
+ parport_enable_irq (port);
+ no_irq = 0;
+ }
+
+ port->physport->ieee1284.phase = IEEE1284_PH_FWD_DATA;
+ parport_write_control (port, ctl);
+ parport_data_forward (port);
+ while (count < len) {
+ unsigned long expire = jiffies + dev->timeout;
+ long wait = (HZ + 99) / 100;
+ unsigned char mask = (PARPORT_STATUS_ERROR
+ | PARPORT_STATUS_BUSY);
+ unsigned char val = (PARPORT_STATUS_ERROR
+ | PARPORT_STATUS_BUSY);
+
+ /* Wait until the peripheral's ready */
+ do {
+ /* Is the peripheral ready yet? */
+ if (!parport_wait_peripheral (port, mask, val))
+ /* Skip the loop */
+ goto ready;
+
+ /* Is the peripheral upset? */
+ if ((parport_read_status (port) &
+ (PARPORT_STATUS_PAPEROUT |
+ PARPORT_STATUS_SELECT |
+ PARPORT_STATUS_ERROR))
+ != (PARPORT_STATUS_SELECT |
+ PARPORT_STATUS_ERROR))
+ /* If nFault is asserted (i.e. no
+ * error) and PAPEROUT and SELECT are
+ * just red herrings, give the driver
+ * a chance to check it's happy with
+ * that before continuing. */
+ goto stop;
+
+ /* Have we run out of time? */
+ if (!time_before (jiffies, expire))
+ break;
+
+ /* Yield the port for a while. If this is the
+ first time around the loop, don't let go of
+ the port. This way, we find out if we have
+ our interrupt handler called. */
+ if (count && no_irq) {
+ parport_release (dev);
+ __set_current_state (TASK_INTERRUPTIBLE);
+ schedule_timeout (wait);
+ parport_claim_or_block (dev);
+ }
+ else
+ /* We must have the device claimed here */
+ parport_wait_event (port, wait);
+
+ /* Is there a signal pending? */
+ if (signal_pending (current))
+ break;
+
+ /* Wait longer next time. */
+ wait *= 2;
+ } while (time_before (jiffies, expire));
+
+ if (signal_pending (current))
+ break;
+
+ DPRINTK (KERN_DEBUG "%s: Timed out\n", port->name);
+ break;
+
+ ready:
+ /* Write the character to the data lines. */
+ byte = *addr++;
+ parport_write_data (port, byte);
+ udelay (1);
+
+ /* Pulse strobe. */
+ parport_write_control (port, ctl | PARPORT_CONTROL_STROBE);
+ udelay (1); /* strobe */
+
+ parport_write_control (port, ctl);
+ udelay (1); /* hold */
+
+ /* Assume the peripheral received it. */
+ count++;
+
+ /* Let another process run if it needs to. */
+ if (time_before (jiffies, expire))
+ if (!parport_yield_blocking (dev)
+ && need_resched())
+ schedule ();
+ }
+ stop:
+ port->physport->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
+
+ return count;
+}
+
+/* Nibble mode. */
+size_t parport_ieee1284_read_nibble (struct parport *port,
+ void *buffer, size_t len,
+ int flags)
+{
+#ifndef CONFIG_PARPORT_1284
+ return 0;
+#else
+ unsigned char *buf = buffer;
+ int i;
+ unsigned char byte = 0;
+
+ len *= 2; /* in nibbles */
+ for (i=0; i < len; i++) {
+ unsigned char nibble;
+
+ /* Does the error line indicate end of data? */
+ if (((i & 1) == 0) &&
+ (parport_read_status(port) & PARPORT_STATUS_ERROR)) {
+ port->physport->ieee1284.phase = IEEE1284_PH_HBUSY_DNA;
+ DPRINTK (KERN_DEBUG
+ "%s: No more nibble data (%d bytes)\n",
+ port->name, i/2);
+
+ /* Go to reverse idle phase. */
+ parport_frob_control (port,
+ PARPORT_CONTROL_AUTOFD,
+ PARPORT_CONTROL_AUTOFD);
+ port->physport->ieee1284.phase = IEEE1284_PH_REV_IDLE;
+ break;
+ }
+
+ /* Event 7: Set nAutoFd low. */
+ parport_frob_control (port,
+ PARPORT_CONTROL_AUTOFD,
+ PARPORT_CONTROL_AUTOFD);
+
+ /* Event 9: nAck goes low. */
+ port->ieee1284.phase = IEEE1284_PH_REV_DATA;
+ if (parport_wait_peripheral (port,
+ PARPORT_STATUS_ACK, 0)) {
+ /* Timeout -- no more data? */
+ DPRINTK (KERN_DEBUG
+ "%s: Nibble timeout at event 9 (%d bytes)\n",
+ port->name, i/2);
+ parport_frob_control (port, PARPORT_CONTROL_AUTOFD, 0);
+ break;
+ }
+
+
+ /* Read a nibble. */
+ nibble = parport_read_status (port) >> 3;
+ nibble &= ~8;
+ if ((nibble & 0x10) == 0)
+ nibble |= 8;
+ nibble &= 0xf;
+
+ /* Event 10: Set nAutoFd high. */
+ parport_frob_control (port, PARPORT_CONTROL_AUTOFD, 0);
+
+ /* Event 11: nAck goes high. */
+ if (parport_wait_peripheral (port,
+ PARPORT_STATUS_ACK,
+ PARPORT_STATUS_ACK)) {
+ /* Timeout -- no more data? */
+ DPRINTK (KERN_DEBUG
+ "%s: Nibble timeout at event 11\n",
+ port->name);
+ break;
+ }
+
+ if (i & 1) {
+ /* Second nibble */
+ byte |= nibble << 4;
+ *buf++ = byte;
+ } else
+ byte = nibble;
+ }
+
+ i /= 2; /* i is now in bytes */
+
+ if (i == len) {
+ /* Read the last nibble without checking data avail. */
+ port = port->physport;
+ if (parport_read_status (port) & PARPORT_STATUS_ERROR)
+ port->ieee1284.phase = IEEE1284_PH_HBUSY_DNA;
+ else
+ port->ieee1284.phase = IEEE1284_PH_HBUSY_DAVAIL;
+ }
+
+ return i;
+#endif /* IEEE1284 support */
+}
+
+/* Byte mode. */
+size_t parport_ieee1284_read_byte (struct parport *port,
+ void *buffer, size_t len,
+ int flags)
+{
+#ifndef CONFIG_PARPORT_1284
+ return 0;
+#else
+ unsigned char *buf = buffer;
+ ssize_t count = 0;
+
+ for (count = 0; count < len; count++) {
+ unsigned char byte;
+
+ /* Data available? */
+ if (parport_read_status (port) & PARPORT_STATUS_ERROR) {
+ port->physport->ieee1284.phase = IEEE1284_PH_HBUSY_DNA;
+ DPRINTK (KERN_DEBUG
+ "%s: No more byte data (%Zd bytes)\n",
+ port->name, count);
+
+ /* Go to reverse idle phase. */
+ parport_frob_control (port,
+ PARPORT_CONTROL_AUTOFD,
+ PARPORT_CONTROL_AUTOFD);
+ port->physport->ieee1284.phase = IEEE1284_PH_REV_IDLE;
+ break;
+ }
+
+ /* Event 14: Place data bus in high impedance state. */
+ parport_data_reverse (port);
+
+ /* Event 7: Set nAutoFd low. */
+ parport_frob_control (port,
+ PARPORT_CONTROL_AUTOFD,
+ PARPORT_CONTROL_AUTOFD);
+
+ /* Event 9: nAck goes low. */
+ port->physport->ieee1284.phase = IEEE1284_PH_REV_DATA;
+ if (parport_wait_peripheral (port,
+ PARPORT_STATUS_ACK,
+ 0)) {
+ /* Timeout -- no more data? */
+ parport_frob_control (port, PARPORT_CONTROL_AUTOFD,
+ 0);
+ DPRINTK (KERN_DEBUG "%s: Byte timeout at event 9\n",
+ port->name);
+ break;
+ }
+
+ byte = parport_read_data (port);
+ *buf++ = byte;
+
+ /* Event 10: Set nAutoFd high */
+ parport_frob_control (port, PARPORT_CONTROL_AUTOFD, 0);
+
+ /* Event 11: nAck goes high. */
+ if (parport_wait_peripheral (port,
+ PARPORT_STATUS_ACK,
+ PARPORT_STATUS_ACK)) {
+ /* Timeout -- no more data? */
+ DPRINTK (KERN_DEBUG "%s: Byte timeout at event 11\n",
+ port->name);
+ break;
+ }
+
+ /* Event 16: Set nStrobe low. */
+ parport_frob_control (port,
+ PARPORT_CONTROL_STROBE,
+ PARPORT_CONTROL_STROBE);
+ udelay (5);
+
+ /* Event 17: Set nStrobe high. */
+ parport_frob_control (port, PARPORT_CONTROL_STROBE, 0);
+ }
+
+ if (count == len) {
+ /* Read the last byte without checking data avail. */
+ port = port->physport;
+ if (parport_read_status (port) & PARPORT_STATUS_ERROR)
+ port->ieee1284.phase = IEEE1284_PH_HBUSY_DNA;
+ else
+ port->ieee1284.phase = IEEE1284_PH_HBUSY_DAVAIL;
+ }
+
+ return count;
+#endif /* IEEE1284 support */
+}
+
+/*** *
+ * ECP Functions. *
+ * ***/
+
+#ifdef CONFIG_PARPORT_1284
+
+static inline
+int ecp_forward_to_reverse (struct parport *port)
+{
+ int retval;
+
+ /* Event 38: Set nAutoFd low */
+ parport_frob_control (port,
+ PARPORT_CONTROL_AUTOFD,
+ PARPORT_CONTROL_AUTOFD);
+ parport_data_reverse (port);
+ udelay (5);
+
+ /* Event 39: Set nInit low to initiate bus reversal */
+ parport_frob_control (port,
+ PARPORT_CONTROL_INIT,
+ 0);
+
+ /* Event 40: PError goes low */
+ retval = parport_wait_peripheral (port,
+ PARPORT_STATUS_PAPEROUT, 0);
+
+ if (!retval) {
+ DPRINTK (KERN_DEBUG "%s: ECP direction: reverse\n",
+ port->name);
+ port->ieee1284.phase = IEEE1284_PH_REV_IDLE;
+ } else {
+ DPRINTK (KERN_DEBUG "%s: ECP direction: failed to reverse\n",
+ port->name);
+ port->ieee1284.phase = IEEE1284_PH_ECP_DIR_UNKNOWN;
+ }
+
+ return retval;
+}
+
+static inline
+int ecp_reverse_to_forward (struct parport *port)
+{
+ int retval;
+
+ /* Event 47: Set nInit high */
+ parport_frob_control (port,
+ PARPORT_CONTROL_INIT
+ | PARPORT_CONTROL_AUTOFD,
+ PARPORT_CONTROL_INIT
+ | PARPORT_CONTROL_AUTOFD);
+
+ /* Event 49: PError goes high */
+ retval = parport_wait_peripheral (port,
+ PARPORT_STATUS_PAPEROUT,
+ PARPORT_STATUS_PAPEROUT);
+
+ if (!retval) {
+ parport_data_forward (port);
+ DPRINTK (KERN_DEBUG "%s: ECP direction: forward\n",
+ port->name);
+ port->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
+ } else {
+ DPRINTK (KERN_DEBUG
+ "%s: ECP direction: failed to switch forward\n",
+ port->name);
+ port->ieee1284.phase = IEEE1284_PH_ECP_DIR_UNKNOWN;
+ }
+
+
+ return retval;
+}
+
+#endif /* IEEE1284 support */
+
+/* ECP mode, forward channel, data. */
+size_t parport_ieee1284_ecp_write_data (struct parport *port,
+ const void *buffer, size_t len,
+ int flags)
+{
+#ifndef CONFIG_PARPORT_1284
+ return 0;
+#else
+ const unsigned char *buf = buffer;
+ size_t written;
+ int retry;
+
+ port = port->physport;
+
+ if (port->ieee1284.phase != IEEE1284_PH_FWD_IDLE)
+ if (ecp_reverse_to_forward (port))
+ return 0;
+
+ port->ieee1284.phase = IEEE1284_PH_FWD_DATA;
+
+ /* HostAck high (data, not command) */
+ parport_frob_control (port,
+ PARPORT_CONTROL_AUTOFD
+ | PARPORT_CONTROL_STROBE
+ | PARPORT_CONTROL_INIT,
+ PARPORT_CONTROL_INIT);
+ for (written = 0; written < len; written++, buf++) {
+ unsigned long expire = jiffies + port->cad->timeout;
+ unsigned char byte;
+
+ byte = *buf;
+ try_again:
+ parport_write_data (port, byte);
+ parport_frob_control (port, PARPORT_CONTROL_STROBE,
+ PARPORT_CONTROL_STROBE);
+ udelay (5);
+ for (retry = 0; retry < 100; retry++) {
+ if (!parport_wait_peripheral (port,
+ PARPORT_STATUS_BUSY, 0))
+ goto success;
+
+ if (signal_pending (current)) {
+ parport_frob_control (port,
+ PARPORT_CONTROL_STROBE,
+ 0);
+ break;
+ }
+ }
+
+ /* Time for Host Transfer Recovery (page 41 of IEEE1284) */
+ DPRINTK (KERN_DEBUG "%s: ECP transfer stalled!\n", port->name);
+
+ parport_frob_control (port, PARPORT_CONTROL_INIT,
+ PARPORT_CONTROL_INIT);
+ udelay (50);
+ if (parport_read_status (port) & PARPORT_STATUS_PAPEROUT) {
+ /* It's buggered. */
+ parport_frob_control (port, PARPORT_CONTROL_INIT, 0);
+ break;
+ }
+
+ parport_frob_control (port, PARPORT_CONTROL_INIT, 0);
+ udelay (50);
+ if (!(parport_read_status (port) & PARPORT_STATUS_PAPEROUT))
+ break;
+
+ DPRINTK (KERN_DEBUG "%s: Host transfer recovered\n",
+ port->name);
+
+ if (time_after_eq (jiffies, expire)) break;
+ goto try_again;
+ success:
+ parport_frob_control (port, PARPORT_CONTROL_STROBE, 0);
+ udelay (5);
+ if (parport_wait_peripheral (port,
+ PARPORT_STATUS_BUSY,
+ PARPORT_STATUS_BUSY))
+ /* Peripheral hasn't accepted the data. */
+ break;
+ }
+
+ port->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
+
+ return written;
+#endif /* IEEE1284 support */
+}
+
+/* ECP mode, reverse channel, data. */
+size_t parport_ieee1284_ecp_read_data (struct parport *port,
+ void *buffer, size_t len, int flags)
+{
+#ifndef CONFIG_PARPORT_1284
+ return 0;
+#else
+ struct pardevice *dev = port->cad;
+ unsigned char *buf = buffer;
+ int rle_count = 0; /* shut gcc up */
+ unsigned char ctl;
+ int rle = 0;
+ ssize_t count = 0;
+
+ port = port->physport;
+
+ if (port->ieee1284.phase != IEEE1284_PH_REV_IDLE)
+ if (ecp_forward_to_reverse (port))
+ return 0;
+
+ port->ieee1284.phase = IEEE1284_PH_REV_DATA;
+
+ /* Set HostAck low to start accepting data. */
+ ctl = parport_read_control (port);
+ ctl &= ~(PARPORT_CONTROL_STROBE | PARPORT_CONTROL_INIT |
+ PARPORT_CONTROL_AUTOFD);
+ parport_write_control (port,
+ ctl | PARPORT_CONTROL_AUTOFD);
+ while (count < len) {
+ unsigned long expire = jiffies + dev->timeout;
+ unsigned char byte;
+ int command;
+
+ /* Event 43: Peripheral sets nAck low. It can take as
+ long as it wants. */
+ while (parport_wait_peripheral (port, PARPORT_STATUS_ACK, 0)) {
+ /* The peripheral hasn't given us data in
+ 35ms. If we have data to give back to the
+ caller, do it now. */
+ if (count)
+ goto out;
+
+ /* If we've used up all the time we were allowed,
+ give up altogether. */
+ if (!time_before (jiffies, expire))
+ goto out;
+
+ /* Yield the port for a while. */
+ if (count && dev->port->irq != PARPORT_IRQ_NONE) {
+ parport_release (dev);
+ __set_current_state (TASK_INTERRUPTIBLE);
+ schedule_timeout ((HZ + 24) / 25);
+ parport_claim_or_block (dev);
+ }
+ else
+ /* We must have the device claimed here. */
+ parport_wait_event (port, (HZ + 24) / 25);
+
+ /* Is there a signal pending? */
+ if (signal_pending (current))
+ goto out;
+ }
+
+ /* Is this a command? */
+ if (rle)
+ /* The last byte was a run-length count, so
+ this can't be as well. */
+ command = 0;
+ else
+ command = (parport_read_status (port) &
+ PARPORT_STATUS_BUSY) ? 1 : 0;
+
+ /* Read the data. */
+ byte = parport_read_data (port);
+
+ /* If this is a channel command, rather than an RLE
+ command or a normal data byte, don't accept it. */
+ if (command) {
+ if (byte & 0x80) {
+ DPRINTK (KERN_DEBUG "%s: stopping short at "
+ "channel command (%02x)\n",
+ port->name, byte);
+ goto out;
+ }
+ else if (port->ieee1284.mode != IEEE1284_MODE_ECPRLE)
+ DPRINTK (KERN_DEBUG "%s: device illegally "
+ "using RLE; accepting anyway\n",
+ port->name);
+
+ rle_count = byte + 1;
+
+ /* Are we allowed to read that many bytes? */
+ if (rle_count > (len - count)) {
+ DPRINTK (KERN_DEBUG "%s: leaving %d RLE bytes "
+ "for next time\n", port->name,
+ rle_count);
+ break;
+ }
+
+ rle = 1;
+ }
+
+ /* Event 44: Set HostAck high, acknowledging handshake. */
+ parport_write_control (port, ctl);
+
+ /* Event 45: The peripheral has 35ms to set nAck high. */
+ if (parport_wait_peripheral (port, PARPORT_STATUS_ACK,
+ PARPORT_STATUS_ACK)) {
+ /* It's gone wrong. Return what data we have
+ to the caller. */
+ DPRINTK (KERN_DEBUG "ECP read timed out at 45\n");
+
+ if (command)
+ printk (KERN_WARNING
+ "%s: command ignored (%02x)\n",
+ port->name, byte);
+
+ break;
+ }
+
+ /* Event 46: Set HostAck low and accept the data. */
+ parport_write_control (port,
+ ctl | PARPORT_CONTROL_AUTOFD);
+
+ /* If we just read a run-length count, fetch the data. */
+ if (command)
+ continue;
+
+ /* If this is the byte after a run-length count, decompress. */
+ if (rle) {
+ rle = 0;
+ memset (buf, byte, rle_count);
+ buf += rle_count;
+ count += rle_count;
+ DPRINTK (KERN_DEBUG "%s: decompressed to %d bytes\n",
+ port->name, rle_count);
+ } else {
+ /* Normal data byte. */
+ *buf = byte;
+ buf++, count++;
+ }
+ }
+
+ out:
+ port->ieee1284.phase = IEEE1284_PH_REV_IDLE;
+ return count;
+#endif /* IEEE1284 support */
+}
+
+/* ECP mode, forward channel, commands. */
+size_t parport_ieee1284_ecp_write_addr (struct parport *port,
+ const void *buffer, size_t len,
+ int flags)
+{
+#ifndef CONFIG_PARPORT_1284
+ return 0;
+#else
+ const unsigned char *buf = buffer;
+ size_t written;
+ int retry;
+
+ port = port->physport;
+
+ if (port->ieee1284.phase != IEEE1284_PH_FWD_IDLE)
+ if (ecp_reverse_to_forward (port))
+ return 0;
+
+ port->ieee1284.phase = IEEE1284_PH_FWD_DATA;
+
+ /* HostAck low (command, not data) */
+ parport_frob_control (port,
+ PARPORT_CONTROL_AUTOFD
+ | PARPORT_CONTROL_STROBE
+ | PARPORT_CONTROL_INIT,
+ PARPORT_CONTROL_AUTOFD
+ | PARPORT_CONTROL_INIT);
+ for (written = 0; written < len; written++, buf++) {
+ unsigned long expire = jiffies + port->cad->timeout;
+ unsigned char byte;
+
+ byte = *buf;
+ try_again:
+ parport_write_data (port, byte);
+ parport_frob_control (port, PARPORT_CONTROL_STROBE,
+ PARPORT_CONTROL_STROBE);
+ udelay (5);
+ for (retry = 0; retry < 100; retry++) {
+ if (!parport_wait_peripheral (port,
+ PARPORT_STATUS_BUSY, 0))
+ goto success;
+
+ if (signal_pending (current)) {
+ parport_frob_control (port,
+ PARPORT_CONTROL_STROBE,
+ 0);
+ break;
+ }
+ }
+
+ /* Time for Host Transfer Recovery (page 41 of IEEE1284) */
+ DPRINTK (KERN_DEBUG "%s: ECP transfer stalled!\n", port->name);
+
+ parport_frob_control (port, PARPORT_CONTROL_INIT,
+ PARPORT_CONTROL_INIT);
+ udelay (50);
+ if (parport_read_status (port) & PARPORT_STATUS_PAPEROUT) {
+ /* It's buggered. */
+ parport_frob_control (port, PARPORT_CONTROL_INIT, 0);
+ break;
+ }
+
+ parport_frob_control (port, PARPORT_CONTROL_INIT, 0);
+ udelay (50);
+ if (!(parport_read_status (port) & PARPORT_STATUS_PAPEROUT))
+ break;
+
+ DPRINTK (KERN_DEBUG "%s: Host transfer recovered\n",
+ port->name);
+
+ if (time_after_eq (jiffies, expire)) break;
+ goto try_again;
+ success:
+ parport_frob_control (port, PARPORT_CONTROL_STROBE, 0);
+ udelay (5);
+ if (parport_wait_peripheral (port,
+ PARPORT_STATUS_BUSY,
+ PARPORT_STATUS_BUSY))
+ /* Peripheral hasn't accepted the data. */
+ break;
+ }
+
+ port->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
+
+ return written;
+#endif /* IEEE1284 support */
+}
+
+/*** *
+ * EPP functions. *
+ * ***/
+
+/* EPP mode, forward channel, data. */
+size_t parport_ieee1284_epp_write_data (struct parport *port,
+ const void *buffer, size_t len,
+ int flags)
+{
+ unsigned char *bp = (unsigned char *) buffer;
+ size_t ret = 0;
+
+ /* set EPP idle state (just to make sure) with strobe low */
+ parport_frob_control (port,
+ PARPORT_CONTROL_STROBE |
+ PARPORT_CONTROL_AUTOFD |
+ PARPORT_CONTROL_SELECT |
+ PARPORT_CONTROL_INIT,
+ PARPORT_CONTROL_STROBE |
+ PARPORT_CONTROL_INIT);
+ port->ops->data_forward (port);
+ for (; len > 0; len--, bp++) {
+ /* Event 62: Write data and set autofd low */
+ parport_write_data (port, *bp);
+ parport_frob_control (port, PARPORT_CONTROL_AUTOFD,
+ PARPORT_CONTROL_AUTOFD);
+
+ /* Event 58: wait for busy (nWait) to go high */
+ if (parport_poll_peripheral (port, PARPORT_STATUS_BUSY, 0, 10))
+ break;
+
+ /* Event 63: set nAutoFd (nDStrb) high */
+ parport_frob_control (port, PARPORT_CONTROL_AUTOFD, 0);
+
+ /* Event 60: wait for busy (nWait) to go low */
+ if (parport_poll_peripheral (port, PARPORT_STATUS_BUSY,
+ PARPORT_STATUS_BUSY, 5))
+ break;
+
+ ret++;
+ }
+
+ /* Event 61: set strobe (nWrite) high */
+ parport_frob_control (port, PARPORT_CONTROL_STROBE, 0);
+
+ return ret;
+}
+
+/* EPP mode, reverse channel, data. */
+size_t parport_ieee1284_epp_read_data (struct parport *port,
+ void *buffer, size_t len,
+ int flags)
+{
+ unsigned char *bp = (unsigned char *) buffer;
+ unsigned ret = 0;
+
+ /* set EPP idle state (just to make sure) with strobe high */
+ parport_frob_control (port,
+ PARPORT_CONTROL_STROBE |
+ PARPORT_CONTROL_AUTOFD |
+ PARPORT_CONTROL_SELECT |
+ PARPORT_CONTROL_INIT,
+ PARPORT_CONTROL_INIT);
+ port->ops->data_reverse (port);
+ for (; len > 0; len--, bp++) {
+ /* Event 67: set nAutoFd (nDStrb) low */
+ parport_frob_control (port,
+ PARPORT_CONTROL_AUTOFD,
+ PARPORT_CONTROL_AUTOFD);
+ /* Event 58: wait for Busy to go high */
+ if (parport_wait_peripheral (port, PARPORT_STATUS_BUSY, 0)) {
+ break;
+ }
+
+ *bp = parport_read_data (port);
+
+ /* Event 63: set nAutoFd (nDStrb) high */
+ parport_frob_control (port, PARPORT_CONTROL_AUTOFD, 0);
+
+ /* Event 60: wait for Busy to go low */
+ if (parport_poll_peripheral (port, PARPORT_STATUS_BUSY,
+ PARPORT_STATUS_BUSY, 5)) {
+ break;
+ }
+
+ ret++;
+ }
+ port->ops->data_forward (port);
+
+ return ret;
+}
+
+/* EPP mode, forward channel, addresses. */
+size_t parport_ieee1284_epp_write_addr (struct parport *port,
+ const void *buffer, size_t len,
+ int flags)
+{
+ unsigned char *bp = (unsigned char *) buffer;
+ size_t ret = 0;
+
+ /* set EPP idle state (just to make sure) with strobe low */
+ parport_frob_control (port,
+ PARPORT_CONTROL_STROBE |
+ PARPORT_CONTROL_AUTOFD |
+ PARPORT_CONTROL_SELECT |
+ PARPORT_CONTROL_INIT,
+ PARPORT_CONTROL_STROBE |
+ PARPORT_CONTROL_INIT);
+ port->ops->data_forward (port);
+ for (; len > 0; len--, bp++) {
+ /* Event 56: Write data and set nAStrb low. */
+ parport_write_data (port, *bp);
+ parport_frob_control (port, PARPORT_CONTROL_SELECT,
+ PARPORT_CONTROL_SELECT);
+
+ /* Event 58: wait for busy (nWait) to go high */
+ if (parport_poll_peripheral (port, PARPORT_STATUS_BUSY, 0, 10))
+ break;
+
+ /* Event 59: set nAStrb high */
+ parport_frob_control (port, PARPORT_CONTROL_SELECT, 0);
+
+ /* Event 60: wait for busy (nWait) to go low */
+ if (parport_poll_peripheral (port, PARPORT_STATUS_BUSY,
+ PARPORT_STATUS_BUSY, 5))
+ break;
+
+ ret++;
+ }
+
+ /* Event 61: set strobe (nWrite) high */
+ parport_frob_control (port, PARPORT_CONTROL_STROBE, 0);
+
+ return ret;
+}
+
+/* EPP mode, reverse channel, addresses. */
+size_t parport_ieee1284_epp_read_addr (struct parport *port,
+ void *buffer, size_t len,
+ int flags)
+{
+ unsigned char *bp = (unsigned char *) buffer;
+ unsigned ret = 0;
+
+ /* Set EPP idle state (just to make sure) with strobe high */
+ parport_frob_control (port,
+ PARPORT_CONTROL_STROBE |
+ PARPORT_CONTROL_AUTOFD |
+ PARPORT_CONTROL_SELECT |
+ PARPORT_CONTROL_INIT,
+ PARPORT_CONTROL_INIT);
+ port->ops->data_reverse (port);
+ for (; len > 0; len--, bp++) {
+ /* Event 64: set nSelectIn (nAStrb) low */
+ parport_frob_control (port, PARPORT_CONTROL_SELECT,
+ PARPORT_CONTROL_SELECT);
+
+ /* Event 58: wait for Busy to go high */
+ if (parport_wait_peripheral (port, PARPORT_STATUS_BUSY, 0)) {
+ break;
+ }
+
+ *bp = parport_read_data (port);
+
+ /* Event 59: set nSelectIn (nAStrb) high */
+ parport_frob_control (port, PARPORT_CONTROL_SELECT,
+ PARPORT_CONTROL_SELECT);
+
+ /* Event 60: wait for Busy to go low */
+ if (parport_poll_peripheral (port, PARPORT_STATUS_BUSY,
+ PARPORT_STATUS_BUSY, 5))
+ break;
+
+ ret++;
+ }
+ port->ops->data_forward (port);
+
+ return ret;
+}
+
+EXPORT_SYMBOL(parport_ieee1284_ecp_write_data);
+EXPORT_SYMBOL(parport_ieee1284_ecp_read_data);
+EXPORT_SYMBOL(parport_ieee1284_ecp_write_addr);
+EXPORT_SYMBOL(parport_ieee1284_write_compat);
+EXPORT_SYMBOL(parport_ieee1284_read_nibble);
+EXPORT_SYMBOL(parport_ieee1284_read_byte);
+EXPORT_SYMBOL(parport_ieee1284_epp_write_data);
+EXPORT_SYMBOL(parport_ieee1284_epp_read_data);
+EXPORT_SYMBOL(parport_ieee1284_epp_write_addr);
+EXPORT_SYMBOL(parport_ieee1284_epp_read_addr);