summaryrefslogtreecommitdiff
path: root/drivers/pci
diff options
context:
space:
mode:
authorBjorn Helgaas <bhelgaas@google.com>2012-07-09 23:38:57 +0400
committerBjorn Helgaas <bhelgaas@google.com>2012-07-10 05:52:04 +0400
commit2b28ae1912e5ce5bb0527e352ae6ff04e76183d1 (patch)
treef8fb930ee1277c1e59c3db8bb802867e2c2d9a59 /drivers/pci
parent5dde383e2ef5e22fe7db689dc38c1aabfb801449 (diff)
downloadlinux-2b28ae1912e5ce5bb0527e352ae6ff04e76183d1.tar.xz
PCI: reimplement P2P bridge 1K I/O windows (Intel P64H2)
9d265124d051 and 15a260d53f7c added quirks for P2P bridges that support I/O windows that start/end at 1K boundaries, not just the 4K boundaries defined by the PCI spec. For details, see the IOBL_ADR register and the EN1K bit in the CNF register in the Intel 82870P2 (P64H2). These quirks complicate the code that reads P2P bridge windows (pci_read_bridge_io() and pci_cfg_fake_ranges()) because the bridge I/O resource is updated in the HEADER quirk, in pci_read_bridge_io(), in pci_setup_bridge(), and again in the FINAL quirk. This is confusing and makes it impossible to reassign the bridge windows after FINAL quirks are run. This patch adds support for 1K windows in the generic paths, so the HEADER quirk only has to enable this support. The FINAL quirk, which used to undo damage done by pci_setup_bridge(), is no longer needed. This removes "if (!res->start) res->start = ..." from pci_read_bridge_io(); that was part of 9d265124d051 to avoid overwriting the resource filled in by the quirk. Since pci_read_bridge_io() itself now knows about granularity, the quirk no longer updates the resource and this test is no longer needed. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Diffstat (limited to 'drivers/pci')
-rw-r--r--drivers/pci/probe.c25
-rw-r--r--drivers/pci/quirks.c39
-rw-r--r--drivers/pci/setup-bus.c11
3 files changed, 24 insertions, 51 deletions
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 9c5d2a992999..ef24cf765b2f 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -269,15 +269,23 @@ static void __devinit pci_read_bridge_io(struct pci_bus *child)
{
struct pci_dev *dev = child->self;
u8 io_base_lo, io_limit_lo;
- unsigned long base, limit;
+ unsigned long io_mask, io_granularity, base, limit;
struct pci_bus_region region;
- struct resource *res, res2;
+ struct resource *res;
+
+ io_mask = PCI_IO_RANGE_MASK;
+ io_granularity = 0x1000;
+ if (dev->io_window_1k) {
+ /* Support 1K I/O space granularity */
+ io_mask = PCI_IO_1K_RANGE_MASK;
+ io_granularity = 0x400;
+ }
res = child->resource[0];
pci_read_config_byte(dev, PCI_IO_BASE, &io_base_lo);
pci_read_config_byte(dev, PCI_IO_LIMIT, &io_limit_lo);
- base = (io_base_lo & PCI_IO_RANGE_MASK) << 8;
- limit = (io_limit_lo & PCI_IO_RANGE_MASK) << 8;
+ base = (io_base_lo & io_mask) << 8;
+ limit = (io_limit_lo & io_mask) << 8;
if ((io_base_lo & PCI_IO_RANGE_TYPE_MASK) == PCI_IO_RANGE_TYPE_32) {
u16 io_base_hi, io_limit_hi;
@@ -289,14 +297,9 @@ static void __devinit pci_read_bridge_io(struct pci_bus *child)
if (base <= limit) {
res->flags = (io_base_lo & PCI_IO_RANGE_TYPE_MASK) | IORESOURCE_IO;
- res2.flags = res->flags;
region.start = base;
- region.end = limit + 0xfff;
- pcibios_bus_to_resource(dev, &res2, &region);
- if (!res->start)
- res->start = res2.start;
- if (!res->end)
- res->end = res2.end;
+ region.end = limit + io_granularity - 1;
+ pcibios_bus_to_resource(dev, res, &region);
dev_printk(KERN_DEBUG, &dev->dev, " bridge window %pR\n", res);
}
}
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 2a7521677541..356846bd7ffb 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1938,53 +1938,16 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1
static void __devinit quirk_p64h2_1k_io(struct pci_dev *dev)
{
u16 en1k;
- u8 io_base_lo, io_limit_lo;
- unsigned long base, limit;
- struct resource *res = dev->resource + PCI_BRIDGE_RESOURCES;
pci_read_config_word(dev, 0x40, &en1k);
if (en1k & 0x200) {
dev_info(&dev->dev, "Enable I/O Space to 1KB granularity\n");
-
- pci_read_config_byte(dev, PCI_IO_BASE, &io_base_lo);
- pci_read_config_byte(dev, PCI_IO_LIMIT, &io_limit_lo);
- base = (io_base_lo & (PCI_IO_RANGE_MASK | 0x0c)) << 8;
- limit = (io_limit_lo & (PCI_IO_RANGE_MASK | 0x0c)) << 8;
-
- if (base <= limit) {
- res->start = base;
- res->end = limit + 0x3ff;
- }
+ dev->io_window_1k = 1;
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x1460, quirk_p64h2_1k_io);
-/* Fix the IOBL_ADR for 1k I/O space granularity on the Intel P64H2
- * The IOBL_ADR gets re-written to 4k boundaries in pci_setup_bridge()
- * in drivers/pci/setup-bus.c
- */
-static void __devinit quirk_p64h2_1k_io_fix_iobl(struct pci_dev *dev)
-{
- u16 en1k, iobl_adr, iobl_adr_1k;
- struct resource *res = dev->resource + PCI_BRIDGE_RESOURCES;
-
- pci_read_config_word(dev, 0x40, &en1k);
-
- if (en1k & 0x200) {
- pci_read_config_word(dev, PCI_IO_BASE, &iobl_adr);
-
- iobl_adr_1k = iobl_adr | (res->start >> 8) | (res->end & 0xfc00);
-
- if (iobl_adr != iobl_adr_1k) {
- dev_info(&dev->dev, "Fixing P64H2 IOBL_ADR from 0x%x to 0x%x for 1KB granularity\n",
- iobl_adr,iobl_adr_1k);
- pci_write_config_word(dev, PCI_IO_BASE, iobl_adr_1k);
- }
- }
-}
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1460, quirk_p64h2_1k_io_fix_iobl);
-
/* Under some circumstances, AER is not linked with extended capabilities.
* Force it to be linked by setting the corresponding control bit in the
* config space.
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index 8fa2d4be88de..dad5425f1f09 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -469,16 +469,23 @@ static void pci_setup_bridge_io(struct pci_bus *bus)
struct pci_dev *bridge = bus->self;
struct resource *res;
struct pci_bus_region region;
+ unsigned long io_mask;
+ u8 io_base_lo, io_limit_lo;
u32 l, io_upper16;
+ io_mask = PCI_IO_RANGE_MASK;
+ if (bridge->io_window_1k)
+ io_mask = PCI_IO_1K_RANGE_MASK;
+
/* Set up the top and bottom of the PCI I/O segment for this bus. */
res = bus->resource[0];
pcibios_resource_to_bus(bridge, &region, res);
if (res->flags & IORESOURCE_IO) {
pci_read_config_dword(bridge, PCI_IO_BASE, &l);
l &= 0xffff0000;
- l |= (region.start >> 8) & 0x00f0;
- l |= region.end & 0xf000;
+ io_base_lo = (region.start >> 8) & io_mask;
+ io_limit_lo = (region.end >> 8) & io_mask;
+ l |= ((u32) io_limit_lo << 8) | io_base_lo;
/* Set up upper 16 bits of I/O base/limit. */
io_upper16 = (region.end & 0xffff0000) | (region.start >> 16);
dev_info(&bridge->dev, " bridge window %pR\n", res);