Merge tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC boardfile updates from Arnd Bergmann
 "Unused boardfile removal for 6.3

  This is a follow-up to the deprecation of most of the old-style board
  files that was merged in linux-6.0, removing them for good.

  This branch is almost exclusively dead code removal based on those
  annotations. Some device driver removals went through separate
  subsystem trees, but the majority is in the same branch, in order to
  better handle dependencies between the patches and avoid breaking
  bisection.

  Unfortunately that leads to merge conflicts against other changes in
  the subsystem trees, but they should all be trivial to resolve by
  removing the files.

  See commit 7d0d3fa7339e ("Merge tag 'arm-boardfiles-6.0' of
  git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") for the
  description of which machines were marked unused and are now removed.

  The only removals that got postponed are Terastation WXL (mv78xx0) and
  Jornada720 (StrongARM1100), which turned out to still have potential
  users"

* tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (91 commits)
  mmc: omap: drop TPS65010 dependency
  ARM: pxa: restore mfp-pxa320.h
  usb: ohci-omap: avoid unused-variable warning
  ARM: debug: remove references in DEBUG_UART_8250_SHIFT to removed configs
  ARM: s3c: remove obsolete s3c-cpu-freq header
  MAINTAINERS: adjust SAMSUNG SOC CLOCK DRIVERS after s3c24xx support removal
  MAINTAINERS: update file entries after arm multi-platform rework and mach-pxa removal
  ARM: remove CONFIG_UNUSED_BOARD_FILES
  mfd: remove htc-pasic3 driver
  w1: remove ds1wm driver
  usb: remove ohci-tmio driver
  fbdev: remove w100fb driver
  fbdev: remove tmiofb driver
  mmc: remove tmio_mmc driver
  mfd: remove ucb1400 support
  mfd: remove toshiba tmio drivers
  rtc: remove v3020 driver
  power: remove pda_power supply driver
  ASoC: pxa: remove unused board support
  pcmcia: remove unused pxa/sa1100 drivers
  ...

1 files changed, 0 insertions, 155 deletions

diff --git a/drivers/pcmcia/sa1111_lubbock.c b/drivers/pcmcia/sa1111_lubbock.c
deleted file mode 100644
index f1b5160cb8fa..000000000000
--- a/drivers/pcmcia/sa1111_lubbock.c
+++ /dev/null
@@ -1,155 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/drivers/pcmcia/pxa2xx_lubbock.c
- *
- * Author:	George Davis
- * Created:	Jan 10, 2002
- * Copyright:	MontaVista Software Inc.
- *
- * Originally based upon linux/drivers/pcmcia/sa1100_neponset.c
- *
- * Lubbock PCMCIA specific routines.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-
-#include <asm/hardware/sa1111.h>
-#include <asm/mach-types.h>
-
-#include "sa1111_generic.h"
-#include "max1600.h"
-
-static int lubbock_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
-{
-	struct max1600 *m;
-	int ret;
-
-	ret = max1600_init(skt->socket.dev.parent, &m,
-			   skt->nr ? MAX1600_CHAN_B : MAX1600_CHAN_A,
-			   MAX1600_CODE_HIGH);
-	if (ret == 0)
-		skt->driver_data = m;
-
-	return ret;
-}
-
-static int
-lubbock_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
-				const socket_state_t *state)
-{
-	struct max1600 *m = skt->driver_data;
-	int ret = 0;
-
-	/* Lubbock uses the Maxim MAX1602, with the following connections:
-	 *
-	 * Socket 0 (PCMCIA):
-	 *	MAX1602	Lubbock		Register
-	 *	Pin	Signal
-	 *	-----	-------		----------------------
-	 *	A0VPP	S0_PWR0		SA-1111 GPIO A<0>
-	 *	A1VPP	S0_PWR1		SA-1111 GPIO A<1>
-	 *	A0VCC	S0_PWR2		SA-1111 GPIO A<2>
-	 *	A1VCC	S0_PWR3		SA-1111 GPIO A<3>
-	 *	VX	VCC
-	 *	VY	+3.3V
-	 *	12IN	+12V
-	 *	CODE	+3.3V		Cirrus  Code, CODE = High (VY)
-	 *
-	 * Socket 1 (CF):
-	 *	MAX1602	Lubbock		Register
-	 *	Pin	Signal
-	 *	-----	-------		----------------------
-	 *	A0VPP	GND		VPP is not connected
-	 *	A1VPP	GND		VPP is not connected
-	 *	A0VCC	S1_PWR0		MISC_WR<14>
-	 *	A1VCC	S1_PWR1		MISC_WR<15>
-	 *	VX	VCC
-	 *	VY	+3.3V
-	 *	12IN	GND		VPP is not connected
-	 *	CODE	+3.3V		Cirrus  Code, CODE = High (VY)
-	 *
-	 */
-
- again:
-	switch (skt->nr) {
-	case 0:
-	case 1:
-		break;
-
-	default:
-		ret = -1;
-	}
-
-	if (ret == 0)
-		ret = sa1111_pcmcia_configure_socket(skt, state);
-	if (ret == 0)
-		ret = max1600_configure(m, state->Vcc, state->Vpp);
-
-#if 1
-	if (ret == 0 && state->Vcc == 33) {
-		struct pcmcia_state new_state;
-
-		/*
-		 * HACK ALERT:
-		 * We can't sense the voltage properly on Lubbock before
-		 * actually applying some power to the socket (catch 22).
-		 * Resense the socket Voltage Sense pins after applying
-		 * socket power.
-		 *
-		 * Note: It takes about 2.5ms for the MAX1602 VCC output
-		 * to rise.
-		 */
-		mdelay(3);
-
-		sa1111_pcmcia_socket_state(skt, &new_state);
-
-		if (!new_state.vs_3v && !new_state.vs_Xv) {
-			/*
-			 * Switch to 5V,  Configure socket with 5V voltage
-			 */
-			max1600_configure(m, 0, 0);
-
-			/*
-			 * It takes about 100ms to turn off Vcc.
-			 */
-			mdelay(100);
-
-			/*
-			 * We need to hack around the const qualifier as
-			 * well to keep this ugly workaround localized and
-			 * not force it to the rest of the code. Barf bags
-			 * available in the seat pocket in front of you!
-			 */
-			((socket_state_t *)state)->Vcc = 50;
-			((socket_state_t *)state)->Vpp = 50;
-			goto again;
-		}
-	}
-#endif
-
-	return ret;
-}
-
-static struct pcmcia_low_level lubbock_pcmcia_ops = {
-	.owner			= THIS_MODULE,
-	.hw_init		= lubbock_pcmcia_hw_init,
-	.configure_socket	= lubbock_pcmcia_configure_socket,
-	.first			= 0,
-	.nr			= 2,
-};
-
-#include "pxa2xx_base.h"
-
-int pcmcia_lubbock_init(struct sa1111_dev *sadev)
-{
-	pxa2xx_drv_pcmcia_ops(&lubbock_pcmcia_ops);
-	pxa2xx_configure_sockets(&sadev->dev, &lubbock_pcmcia_ops);
-	return sa1111_pcmcia_add(sadev, &lubbock_pcmcia_ops,
-				 pxa2xx_drv_pcmcia_add_one);
-}
-
-MODULE_LICENSE("GPL");