Merge tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC boardfile updates from Arnd Bergmann
 "Unused boardfile removal for 6.3

  This is a follow-up to the deprecation of most of the old-style board
  files that was merged in linux-6.0, removing them for good.

  This branch is almost exclusively dead code removal based on those
  annotations. Some device driver removals went through separate
  subsystem trees, but the majority is in the same branch, in order to
  better handle dependencies between the patches and avoid breaking
  bisection.

  Unfortunately that leads to merge conflicts against other changes in
  the subsystem trees, but they should all be trivial to resolve by
  removing the files.

  See commit 7d0d3fa7339e ("Merge tag 'arm-boardfiles-6.0' of
  git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") for the
  description of which machines were marked unused and are now removed.

  The only removals that got postponed are Terastation WXL (mv78xx0) and
  Jornada720 (StrongARM1100), which turned out to still have potential
  users"

* tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (91 commits)
  mmc: omap: drop TPS65010 dependency
  ARM: pxa: restore mfp-pxa320.h
  usb: ohci-omap: avoid unused-variable warning
  ARM: debug: remove references in DEBUG_UART_8250_SHIFT to removed configs
  ARM: s3c: remove obsolete s3c-cpu-freq header
  MAINTAINERS: adjust SAMSUNG SOC CLOCK DRIVERS after s3c24xx support removal
  MAINTAINERS: update file entries after arm multi-platform rework and mach-pxa removal
  ARM: remove CONFIG_UNUSED_BOARD_FILES
  mfd: remove htc-pasic3 driver
  w1: remove ds1wm driver
  usb: remove ohci-tmio driver
  fbdev: remove w100fb driver
  fbdev: remove tmiofb driver
  mmc: remove tmio_mmc driver
  mfd: remove ucb1400 support
  mfd: remove toshiba tmio drivers
  rtc: remove v3020 driver
  power: remove pda_power supply driver
  ASoC: pxa: remove unused board support
  pcmcia: remove unused pxa/sa1100 drivers
  ...

10 files changed, 5 insertions, 585 deletions

diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
index 1525023e49b6..44c16508ef14 100644
--- a/drivers/pcmcia/Kconfig
+++ b/drivers/pcmcia/Kconfig
@@ -194,10 +194,8 @@ config PCMCIA_SA1111
 	tristate "SA1111 support"
 	depends on ARM && SA1111 && PCMCIA
 	select PCMCIA_SOC_COMMON
-	select PCMCIA_SA11XX_BASE if ARCH_SA1100
-	select PCMCIA_PXA2XX if ARCH_LUBBOCK && SA1111
+	select PCMCIA_SA11XX_BASE
 	select PCMCIA_MAX1600 if ASSABET_NEPONSET
-	select PCMCIA_MAX1600 if ARCH_LUBBOCK && SA1111
 	help
 	  Say Y  here to include support for SA1111-based PCMCIA or CF
 	  sockets, found on the Jornada 720, Graphicsmaster and other
@@ -207,14 +205,8 @@ config PCMCIA_SA1111
 
 config PCMCIA_PXA2XX
 	tristate "PXA2xx support"
-	depends on ARM && ARCH_PXA && PCMCIA
-	depends on (ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL \
-		    || ARCH_PXA_PALM || TRIZEPS_PCMCIA \
-		    || ARCOM_PCMCIA || ARCH_PXA_ESERIES \
-		    || MACH_VPAC270 || MACH_BALLOON3 || MACH_COLIBRI \
-		    || MACH_COLIBRI320 || MACH_H4700)
+	depends on ARM && ARCH_PXA && PCMCIA && PXA_SHARPSL
 	select PCMCIA_SOC_COMMON
-	select PCMCIA_MAX1600 if MACH_MAINSTONE
 	help
 	  Say Y here to include support for the PXA2xx PCMCIA controller
 
diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
index b3a2accf47af..c9d51b150682 100644
--- a/drivers/pcmcia/Makefile
+++ b/drivers/pcmcia/Makefile
@@ -36,17 +36,12 @@ obj-$(CONFIG_PCMCIA_MAX1600)			+= max1600.o
 
 sa1111_cs-y					+= sa1111_generic.o
 sa1111_cs-$(CONFIG_ASSABET_NEPONSET)		+= sa1111_neponset.o
-sa1111_cs-$(CONFIG_SA1100_BADGE4)		+= sa1111_badge4.o
 sa1111_cs-$(CONFIG_SA1100_JORNADA720)		+= sa1111_jornada720.o
-sa1111_cs-$(CONFIG_ARCH_LUBBOCK)		+= sa1111_lubbock.o
 
 sa1100_cs-y					+= sa1100_generic.o
 sa1100_cs-$(CONFIG_SA1100_COLLIE)		+= pxa2xx_sharpsl.o
-sa1100_cs-$(CONFIG_SA1100_H3100)		+= sa1100_h3600.o
 sa1100_cs-$(CONFIG_SA1100_H3600)		+= sa1100_h3600.o
-sa1100_cs-$(CONFIG_SA1100_SIMPAD)		+= sa1100_simpad.o
 
-pxa2xx-obj-$(CONFIG_MACH_MAINSTONE)		+= pxa2xx_mainstone.o
 pxa2xx-obj-$(CONFIG_PXA_SHARPSL)		+= pxa2xx_sharpsl.o
 obj-$(CONFIG_PCMCIA_PXA2XX)			+= pxa2xx_base.o $(pxa2xx-obj-y)
 obj-$(CONFIG_PCMCIA_XXS1500)			+= xxs1500_ss.o
diff --git a/drivers/pcmcia/pxa2xx_base.c b/drivers/pcmcia/pxa2xx_base.c
index 0ea41f1411e5..5254028354f4 100644
--- a/drivers/pcmcia/pxa2xx_base.c
+++ b/drivers/pcmcia/pxa2xx_base.c
@@ -206,13 +206,7 @@ pxa2xx_pcmcia_frequency_change(struct soc_pcmcia_socket *skt,
 
 void pxa2xx_configure_sockets(struct device *dev, struct pcmcia_low_level *ops)
 {
-	int nr = 1;
-
-	if ((ops->first + ops->nr) > 1 ||
-	    machine_is_viper() || machine_is_arcom_zeus())
-		nr = 2;
-
-	pxa_smemc_set_pcmcia_socket(nr);
+	pxa_smemc_set_pcmcia_socket(1);
 }
 EXPORT_SYMBOL(pxa2xx_configure_sockets);
 
diff --git a/drivers/pcmcia/pxa2xx_mainstone.c b/drivers/pcmcia/pxa2xx_mainstone.c
deleted file mode 100644
index a076e4108452..000000000000
--- a/drivers/pcmcia/pxa2xx_mainstone.c
+++ /dev/null
@@ -1,122 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/drivers/pcmcia/pxa2xx_mainstone.c
- *
- * Mainstone PCMCIA specific routines.
- *
- * Created:	May 12, 2004
- * Author:	Nicolas Pitre
- * Copyright:	MontaVista Software Inc.
- */
-#include <linux/gpio/consumer.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/platform_device.h>
-
-#include <pcmcia/ss.h>
-
-#include <asm/mach-types.h>
-
-#include "soc_common.h"
-#include "max1600.h"
-
-static int mst_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
-{
-	struct device *dev = skt->socket.dev.parent;
-	struct max1600 *m;
-	int ret;
-
-	skt->stat[SOC_STAT_CD].name = skt->nr ? "bdetect" : "adetect";
-	skt->stat[SOC_STAT_BVD1].name = skt->nr ? "bbvd1" : "abvd1";
-	skt->stat[SOC_STAT_BVD2].name = skt->nr ? "bbvd2" : "abvd2";
-	skt->stat[SOC_STAT_RDY].name = skt->nr ? "bready" : "aready";
-	skt->stat[SOC_STAT_VS1].name = skt->nr ? "bvs1" : "avs1";
-	skt->stat[SOC_STAT_VS2].name = skt->nr ? "bvs2" : "avs2";
-
-	skt->gpio_reset = devm_gpiod_get(dev, skt->nr ? "breset" : "areset",
-					 GPIOD_OUT_HIGH);
-	if (IS_ERR(skt->gpio_reset))
-		return PTR_ERR(skt->gpio_reset);
-
-	ret = max1600_init(dev, &m, skt->nr ? MAX1600_CHAN_B : MAX1600_CHAN_A,
-			   MAX1600_CODE_HIGH);
-	if (ret)
-		return ret;
-
-	skt->driver_data = m;
-
-	return soc_pcmcia_request_gpiods(skt);
-}
-
-static unsigned int mst_pcmcia_bvd1_status[2];
-
-static void mst_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
-				    struct pcmcia_state *state)
-{
-	unsigned int flip = mst_pcmcia_bvd1_status[skt->nr] ^ state->bvd1;
-
-	/*
-	 * Workaround for STSCHG which can't be deasserted:
-	 * We therefore disable/enable corresponding IRQs
-	 * as needed to avoid IRQ locks.
-	 */
-	if (flip) {
-		mst_pcmcia_bvd1_status[skt->nr] = state->bvd1;
-		if (state->bvd1)
-			enable_irq(skt->stat[SOC_STAT_BVD1].irq);
-		else
-			disable_irq(skt->stat[SOC_STAT_BVD2].irq);
-	}
-}
-
-static int mst_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
-				       const socket_state_t *state)
-{
-	return max1600_configure(skt->driver_data, state->Vcc, state->Vpp);
-}
-
-static struct pcmcia_low_level mst_pcmcia_ops __initdata = {
-	.owner			= THIS_MODULE,
-	.hw_init		= mst_pcmcia_hw_init,
-	.socket_state		= mst_pcmcia_socket_state,
-	.configure_socket	= mst_pcmcia_configure_socket,
-	.nr			= 2,
-};
-
-static struct platform_device *mst_pcmcia_device;
-
-static int __init mst_pcmcia_init(void)
-{
-	int ret;
-
-	if (!machine_is_mainstone())
-		return -ENODEV;
-
-	mst_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
-	if (!mst_pcmcia_device)
-		return -ENOMEM;
-
-	ret = platform_device_add_data(mst_pcmcia_device, &mst_pcmcia_ops,
-				       sizeof(mst_pcmcia_ops));
-	if (ret == 0)
-		ret = platform_device_add(mst_pcmcia_device);
-
-	if (ret)
-		platform_device_put(mst_pcmcia_device);
-
-	return ret;
-}
-
-static void __exit mst_pcmcia_exit(void)
-{
-	platform_device_unregister(mst_pcmcia_device);
-}
-
-fs_initcall(mst_pcmcia_init);
-module_exit(mst_pcmcia_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:pxa2xx-pcmcia");
diff --git a/drivers/pcmcia/sa1100_generic.c b/drivers/pcmcia/sa1100_generic.c
index c2b6e828c2c6..89d4ba58c891 100644
--- a/drivers/pcmcia/sa1100_generic.c
+++ b/drivers/pcmcia/sa1100_generic.c
@@ -98,12 +98,9 @@ static struct pcmcia_low_level sa11x0_cf_ops = {
 int __init pcmcia_collie_init(struct device *dev);
 
 static int (*sa11x0_pcmcia_legacy_hw_init[])(struct device *dev) = {
-#if defined(CONFIG_SA1100_H3100) || defined(CONFIG_SA1100_H3600)
+#ifdef CONFIG_SA1100_H3600
 	pcmcia_h3600_init,
 #endif
-#ifdef CONFIG_SA1100_SIMPAD
-	pcmcia_simpad_init,
-#endif
 #ifdef CONFIG_SA1100_COLLIE
        pcmcia_collie_init,
 #endif
diff --git a/drivers/pcmcia/sa1100_h3600.c b/drivers/pcmcia/sa1100_h3600.c
index a91222bc3824..10cb99c20a7f 100644
--- a/drivers/pcmcia/sa1100_h3600.c
+++ b/drivers/pcmcia/sa1100_h3600.c
@@ -156,7 +156,7 @@ int pcmcia_h3600_init(struct device *dev)
 {
 	int ret = -ENODEV;
 
-	if (machine_is_h3600() || machine_is_h3100())
+	if (machine_is_h3600())
 		ret = sa11xx_drv_pcmcia_probe(dev, &h3600_pcmcia_ops, 0, 2);
 
 	return ret;
diff --git a/drivers/pcmcia/sa1100_simpad.c b/drivers/pcmcia/sa1100_simpad.c
deleted file mode 100644
index 784ada5b8c4f..000000000000
--- a/drivers/pcmcia/sa1100_simpad.c
+++ /dev/null
@@ -1,115 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * drivers/pcmcia/sa1100_simpad.c
- *
- * PCMCIA implementation routines for simpad
- *
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <mach/simpad.h>
-#include "sa1100_generic.h"
-
-static int simpad_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
-{
-
-	simpad_clear_cs3_bit(VCC_3V_EN|VCC_5V_EN|EN0|EN1);
-
-	skt->stat[SOC_STAT_CD].name = "cf-detect";
-	skt->stat[SOC_STAT_RDY].name = "cf-ready";
-
-	return soc_pcmcia_request_gpiods(skt);
-}
-
-static void simpad_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
-{
-	/* Disable CF bus: */
-	/*simpad_set_cs3_bit(PCMCIA_BUFF_DIS);*/
-	simpad_clear_cs3_bit(PCMCIA_RESET);
-}
-
-static void
-simpad_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
-			   struct pcmcia_state *state)
-{
-	long cs3reg = simpad_get_cs3_ro();
-
-	/* bvd1 might be cs3reg & PCMCIA_BVD1 */
-	/* bvd2 might be cs3reg & PCMCIA_BVD2 */
-
-	if ((cs3reg & (PCMCIA_VS1|PCMCIA_VS2)) ==
-			(PCMCIA_VS1|PCMCIA_VS2)) {
-		state->vs_3v=0;
-		state->vs_Xv=0;
-	} else {
-		state->vs_3v=1;
-		state->vs_Xv=0;
-	}
-}
-
-static int
-simpad_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
-			       const socket_state_t *state)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	/* Murphy: see table of MIC2562a-1 */
-	switch (state->Vcc) {
-	case 0:
-		simpad_clear_cs3_bit(VCC_3V_EN|VCC_5V_EN|EN0|EN1);
-		break;
-
-	case 33:
-		simpad_clear_cs3_bit(VCC_3V_EN|EN1);
-		simpad_set_cs3_bit(VCC_5V_EN|EN0);
-		break;
-
-	case 50:
-		simpad_clear_cs3_bit(VCC_5V_EN|EN1);
-		simpad_set_cs3_bit(VCC_3V_EN|EN0);
-		break;
-
-	default:
-		printk(KERN_ERR "%s(): unrecognized Vcc %u\n",
-			__func__, state->Vcc);
-		simpad_clear_cs3_bit(VCC_3V_EN|VCC_5V_EN|EN0|EN1);
-		local_irq_restore(flags);
-		return -1;
-	}
-
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-static void simpad_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
-{
-	simpad_set_cs3_bit(PCMCIA_RESET);
-}
-
-static struct pcmcia_low_level simpad_pcmcia_ops = {
-	.owner			= THIS_MODULE,
-	.hw_init		= simpad_pcmcia_hw_init,
-	.hw_shutdown		= simpad_pcmcia_hw_shutdown,
-	.socket_state		= simpad_pcmcia_socket_state,
-	.configure_socket	= simpad_pcmcia_configure_socket,
-	.socket_suspend		= simpad_pcmcia_socket_suspend,
-};
-
-int pcmcia_simpad_init(struct device *dev)
-{
-	int ret = -ENODEV;
-
-	if (machine_is_simpad())
-		ret = sa11xx_drv_pcmcia_probe(dev, &simpad_pcmcia_ops, 1, 1);
-
-	return ret;
-}
diff --git a/drivers/pcmcia/sa1111_badge4.c b/drivers/pcmcia/sa1111_badge4.c
deleted file mode 100644
index e76d5ba921dd..000000000000
--- a/drivers/pcmcia/sa1111_badge4.c
+++ /dev/null
@@ -1,158 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/drivers/pcmcia/sa1100_badge4.c
- *
- * BadgePAD 4 PCMCIA specific routines
- *
- *   Christopher Hoover <ch@hpl.hp.com>
- *
- * Copyright (C) 2002 Hewlett-Packard Company
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <mach/badge4.h>
-#include <asm/hardware/sa1111.h>
-
-#include "sa1111_generic.h"
-
-/*
- * BadgePAD 4 Details
- *
- * PCM Vcc:
- *
- *  PCM Vcc on BadgePAD 4 can be jumpered for 3v3 (short pins 1 and 3
- *  on JP6) or 5v0 (short pins 3 and 5 on JP6).
- *
- * PCM Vpp:
- *
- *  PCM Vpp on BadgePAD 4 can be jumpered for 12v0 (short pins 4 and 6
- *  on JP6) or tied to PCM Vcc (short pins 2 and 4 on JP6).  N.B.,
- *  12v0 operation requires that the power supply actually supply 12v0
- *  via pin 7 of JP7.
- *
- * CF Vcc:
- *
- *  CF Vcc on BadgePAD 4 can be jumpered either for 3v3 (short pins 1
- *  and 2 on JP10) or 5v0 (short pins 2 and 3 on JP10).
- *
- * Unfortunately there's no way programmatically to determine how a
- * given board is jumpered.  This code assumes a default jumpering
- * as described below.
- *
- * If the defaults aren't correct, you may override them with a pcmv
- * setup argument: pcmv=<pcm vcc>,<pcm vpp>,<cf vcc>.  The units are
- * tenths of volts; e.g. pcmv=33,120,50 indicates 3v3 PCM Vcc, 12v0
- * PCM Vpp, and 5v0 CF Vcc.
- *
- */
-
-static int badge4_pcmvcc = 50;  /* pins 3 and 5 jumpered on JP6 */
-static int badge4_pcmvpp = 50;  /* pins 2 and 4 jumpered on JP6 */
-static int badge4_cfvcc = 33;   /* pins 1 and 2 jumpered on JP10 */
-
-static void complain_about_jumpering(const char *whom,
-				     const char *supply,
-				     int given, int wanted)
-{
-	printk(KERN_ERR
-	 "%s: %s %d.%dV wanted but board is jumpered for %s %d.%dV operation"
-	 "; re-jumper the board and/or use pcmv=xx,xx,xx\n",
-	       whom, supply,
-	       wanted / 10, wanted % 10,
-	       supply,
-	       given / 10, given % 10);
-}
-
-static int
-badge4_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state_t *state)
-{
-	int ret;
-
-	switch (skt->nr) {
-	case 0:
-		if ((state->Vcc != 0) &&
-		    (state->Vcc != badge4_pcmvcc)) {
-			complain_about_jumpering(__func__, "pcmvcc",
-						 badge4_pcmvcc, state->Vcc);
-			// Apply power regardless of the jumpering.
-			// return -1;
-		}
-		if ((state->Vpp != 0) &&
-		    (state->Vpp != badge4_pcmvpp)) {
-			complain_about_jumpering(__func__, "pcmvpp",
-						 badge4_pcmvpp, state->Vpp);
-			return -1;
-		}
-		break;
-
-	case 1:
-		if ((state->Vcc != 0) &&
-		    (state->Vcc != badge4_cfvcc)) {
-			complain_about_jumpering(__func__, "cfvcc",
-						 badge4_cfvcc, state->Vcc);
-			return -1;
-		}
-		break;
-
-	default:
-		return -1;
-	}
-
-	ret = sa1111_pcmcia_configure_socket(skt, state);
-	if (ret == 0) {
-		unsigned long flags;
-		int need5V;
-
-		local_irq_save(flags);
-
-		need5V = ((state->Vcc == 50) || (state->Vpp == 50));
-
-		badge4_set_5V(BADGE4_5V_PCMCIA_SOCK(skt->nr), need5V);
-
-		local_irq_restore(flags);
-	}
-
-	return ret;
-}
-
-static struct pcmcia_low_level badge4_pcmcia_ops = {
-	.owner			= THIS_MODULE,
-	.configure_socket	= badge4_pcmcia_configure_socket,
-	.first			= 0,
-	.nr			= 2,
-};
-
-int pcmcia_badge4_init(struct sa1111_dev *dev)
-{
-	printk(KERN_INFO
-	       "%s: badge4_pcmvcc=%d, badge4_pcmvpp=%d, badge4_cfvcc=%d\n",
-	       __func__,
-	       badge4_pcmvcc, badge4_pcmvpp, badge4_cfvcc);
-
-	sa11xx_drv_pcmcia_ops(&badge4_pcmcia_ops);
-	return sa1111_pcmcia_add(dev, &badge4_pcmcia_ops,
-				 sa11xx_drv_pcmcia_add_one);
-}
-
-#ifndef MODULE
-static int __init pcmv_setup(char *s)
-{
-	int v[4];
-
-	s = get_options(s, ARRAY_SIZE(v), v);
-
-	if (v[0] >= 1) badge4_pcmvcc = v[1];
-	if (v[0] >= 2) badge4_pcmvpp = v[2];
-	if (v[0] >= 3) badge4_cfvcc = v[3];
-
-	return 1;
-}
-
-__setup("pcmv=", pcmv_setup);
-#endif
diff --git a/drivers/pcmcia/sa1111_generic.c b/drivers/pcmcia/sa1111_generic.c
index bce664bbdc98..2a67e33fb5f0 100644
--- a/drivers/pcmcia/sa1111_generic.c
+++ b/drivers/pcmcia/sa1111_generic.c
@@ -212,18 +212,10 @@ static int pcmcia_probe(struct sa1111_dev *dev)
 	writel_relaxed(PCCR_S0_FLT | PCCR_S1_FLT, base + PCCR);
 
 	ret = -ENODEV;
-#ifdef CONFIG_SA1100_BADGE4
-	if (machine_is_badge4())
-		ret = pcmcia_badge4_init(dev);
-#endif
 #ifdef CONFIG_SA1100_JORNADA720
 	if (machine_is_jornada720())
 		ret = pcmcia_jornada720_init(dev);
 #endif
-#ifdef CONFIG_ARCH_LUBBOCK
-	if (machine_is_lubbock())
-		ret = pcmcia_lubbock_init(dev);
-#endif
 #ifdef CONFIG_ASSABET_NEPONSET
 	if (machine_is_assabet())
 		ret = pcmcia_neponset_init(dev);
diff --git a/drivers/pcmcia/sa1111_lubbock.c b/drivers/pcmcia/sa1111_lubbock.c
deleted file mode 100644
index f1b5160cb8fa..000000000000
--- a/drivers/pcmcia/sa1111_lubbock.c
+++ /dev/null
@@ -1,155 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/drivers/pcmcia/pxa2xx_lubbock.c
- *
- * Author:	George Davis
- * Created:	Jan 10, 2002
- * Copyright:	MontaVista Software Inc.
- *
- * Originally based upon linux/drivers/pcmcia/sa1100_neponset.c
- *
- * Lubbock PCMCIA specific routines.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-
-#include <asm/hardware/sa1111.h>
-#include <asm/mach-types.h>
-
-#include "sa1111_generic.h"
-#include "max1600.h"
-
-static int lubbock_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
-{
-	struct max1600 *m;
-	int ret;
-
-	ret = max1600_init(skt->socket.dev.parent, &m,
-			   skt->nr ? MAX1600_CHAN_B : MAX1600_CHAN_A,
-			   MAX1600_CODE_HIGH);
-	if (ret == 0)
-		skt->driver_data = m;
-
-	return ret;
-}
-
-static int
-lubbock_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
-				const socket_state_t *state)
-{
-	struct max1600 *m = skt->driver_data;
-	int ret = 0;
-
-	/* Lubbock uses the Maxim MAX1602, with the following connections:
-	 *
-	 * Socket 0 (PCMCIA):
-	 *	MAX1602	Lubbock		Register
-	 *	Pin	Signal
-	 *	-----	-------		----------------------
-	 *	A0VPP	S0_PWR0		SA-1111 GPIO A<0>
-	 *	A1VPP	S0_PWR1		SA-1111 GPIO A<1>
-	 *	A0VCC	S0_PWR2		SA-1111 GPIO A<2>
-	 *	A1VCC	S0_PWR3		SA-1111 GPIO A<3>
-	 *	VX	VCC
-	 *	VY	+3.3V
-	 *	12IN	+12V
-	 *	CODE	+3.3V		Cirrus  Code, CODE = High (VY)
-	 *
-	 * Socket 1 (CF):
-	 *	MAX1602	Lubbock		Register
-	 *	Pin	Signal
-	 *	-----	-------		----------------------
-	 *	A0VPP	GND		VPP is not connected
-	 *	A1VPP	GND		VPP is not connected
-	 *	A0VCC	S1_PWR0		MISC_WR<14>
-	 *	A1VCC	S1_PWR1		MISC_WR<15>
-	 *	VX	VCC
-	 *	VY	+3.3V
-	 *	12IN	GND		VPP is not connected
-	 *	CODE	+3.3V		Cirrus  Code, CODE = High (VY)
-	 *
-	 */
-
- again:
-	switch (skt->nr) {
-	case 0:
-	case 1:
-		break;
-
-	default:
-		ret = -1;
-	}
-
-	if (ret == 0)
-		ret = sa1111_pcmcia_configure_socket(skt, state);
-	if (ret == 0)
-		ret = max1600_configure(m, state->Vcc, state->Vpp);
-
-#if 1
-	if (ret == 0 && state->Vcc == 33) {
-		struct pcmcia_state new_state;
-
-		/*
-		 * HACK ALERT:
-		 * We can't sense the voltage properly on Lubbock before
-		 * actually applying some power to the socket (catch 22).
-		 * Resense the socket Voltage Sense pins after applying
-		 * socket power.
-		 *
-		 * Note: It takes about 2.5ms for the MAX1602 VCC output
-		 * to rise.
-		 */
-		mdelay(3);
-
-		sa1111_pcmcia_socket_state(skt, &new_state);
-
-		if (!new_state.vs_3v && !new_state.vs_Xv) {
-			/*
-			 * Switch to 5V,  Configure socket with 5V voltage
-			 */
-			max1600_configure(m, 0, 0);
-
-			/*
-			 * It takes about 100ms to turn off Vcc.
-			 */
-			mdelay(100);
-
-			/*
-			 * We need to hack around the const qualifier as
-			 * well to keep this ugly workaround localized and
-			 * not force it to the rest of the code. Barf bags
-			 * available in the seat pocket in front of you!
-			 */
-			((socket_state_t *)state)->Vcc = 50;
-			((socket_state_t *)state)->Vpp = 50;
-			goto again;
-		}
-	}
-#endif
-
-	return ret;
-}
-
-static struct pcmcia_low_level lubbock_pcmcia_ops = {
-	.owner			= THIS_MODULE,
-	.hw_init		= lubbock_pcmcia_hw_init,
-	.configure_socket	= lubbock_pcmcia_configure_socket,
-	.first			= 0,
-	.nr			= 2,
-};
-
-#include "pxa2xx_base.h"
-
-int pcmcia_lubbock_init(struct sa1111_dev *sadev)
-{
-	pxa2xx_drv_pcmcia_ops(&lubbock_pcmcia_ops);
-	pxa2xx_configure_sockets(&sadev->dev, &lubbock_pcmcia_ops);
-	return sa1111_pcmcia_add(sadev, &lubbock_pcmcia_ops,
-				 pxa2xx_drv_pcmcia_add_one);
-}
-
-MODULE_LICENSE("GPL");