summaryrefslogtreecommitdiff
path: root/drivers/phy
diff options
context:
space:
mode:
authorVinod Koul <vkoul@kernel.org>2020-06-29 17:54:52 +0300
committerVinod Koul <vkoul@kernel.org>2020-07-08 14:07:05 +0300
commit02dca8c981b552ad4caaa2e858800c78cc20f41c (patch)
tree9ba24b6462bac546e23f855436f34d3c3abb637d /drivers/phy
parent1c59c2d95d3160a2af4a8655d19f56648b2dffa3 (diff)
downloadlinux-02dca8c981b552ad4caaa2e858800c78cc20f41c.tar.xz
phy: qcom: remove ufs qmp phy driver
The UFS specific QMP PHY driver started off supporting the 14nm and 20nm hardware. With the 20nm support marked broken for a long time and the 14nm support added to the common QMP PHY, this driver has not been used in a while. So delete it Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20200629145452.123035-1-vkoul@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
Diffstat (limited to 'drivers/phy')
-rw-r--r--drivers/phy/qualcomm/Kconfig24
-rw-r--r--drivers/phy/qualcomm/Makefile3
-rw-r--r--drivers/phy/qualcomm/phy-qcom-ufs-i.h131
-rw-r--r--drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c172
-rw-r--r--drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.h168
-rw-r--r--drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c226
-rw-r--r--drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.h226
-rw-r--r--drivers/phy/qualcomm/phy-qcom-ufs.c648
8 files changed, 0 insertions, 1598 deletions
diff --git a/drivers/phy/qualcomm/Kconfig b/drivers/phy/qualcomm/Kconfig
index ca9ce7e84a5c..e6f0e514fb1f 100644
--- a/drivers/phy/qualcomm/Kconfig
+++ b/drivers/phy/qualcomm/Kconfig
@@ -59,30 +59,6 @@ config PHY_QCOM_QUSB2
PHY which is usually paired with either the ChipIdea or Synopsys DWC3
USB IPs on MSM SOCs.
-config PHY_QCOM_UFS
- tristate "Qualcomm UFS PHY driver"
- depends on OF && ARCH_QCOM
- select GENERIC_PHY
- help
- Support for UFS PHY on QCOM chipsets.
-
-if PHY_QCOM_UFS
-
-config PHY_QCOM_UFS_14NM
- tristate
- default PHY_QCOM_UFS
- help
- Support for 14nm UFS QMP phy present on QCOM chipsets.
-
-config PHY_QCOM_UFS_20NM
- tristate
- default PHY_QCOM_UFS
- depends on BROKEN
- help
- Support for 20nm UFS QMP phy present on QCOM chipsets.
-
-endif
-
config PHY_QCOM_USB_HS
tristate "Qualcomm USB HS PHY module"
depends on USB_ULPI_BUS
diff --git a/drivers/phy/qualcomm/Makefile b/drivers/phy/qualcomm/Makefile
index 86fb32efab79..a767915decd0 100644
--- a/drivers/phy/qualcomm/Makefile
+++ b/drivers/phy/qualcomm/Makefile
@@ -6,9 +6,6 @@ obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o
obj-$(CONFIG_PHY_QCOM_PCIE2) += phy-qcom-pcie2.o
obj-$(CONFIG_PHY_QCOM_QMP) += phy-qcom-qmp.o
obj-$(CONFIG_PHY_QCOM_QUSB2) += phy-qcom-qusb2.o
-obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs.o
-obj-$(CONFIG_PHY_QCOM_UFS_14NM) += phy-qcom-ufs-qmp-14nm.o
-obj-$(CONFIG_PHY_QCOM_UFS_20NM) += phy-qcom-ufs-qmp-20nm.o
obj-$(CONFIG_PHY_QCOM_USB_HS) += phy-qcom-usb-hs.o
obj-$(CONFIG_PHY_QCOM_USB_HSIC) += phy-qcom-usb-hsic.o
obj-$(CONFIG_PHY_QCOM_USB_HS_28NM) += phy-qcom-usb-hs-28nm.o
diff --git a/drivers/phy/qualcomm/phy-qcom-ufs-i.h b/drivers/phy/qualcomm/phy-qcom-ufs-i.h
deleted file mode 100644
index 9bf973a0d8c3..000000000000
--- a/drivers/phy/qualcomm/phy-qcom-ufs-i.h
+++ /dev/null
@@ -1,131 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (c) 2013-2015, Linux Foundation. All rights reserved.
- */
-
-#ifndef UFS_QCOM_PHY_I_H_
-#define UFS_QCOM_PHY_I_H_
-
-#include <linux/module.h>
-#include <linux/clk.h>
-#include <linux/phy/phy.h>
-#include <linux/regulator/consumer.h>
-#include <linux/reset.h>
-#include <linux/slab.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <linux/iopoll.h>
-
-#define UFS_QCOM_PHY_CAL_ENTRY(reg, val) \
- { \
- .reg_offset = reg, \
- .cfg_value = val, \
- }
-
-#define UFS_QCOM_PHY_NAME_LEN 30
-
-enum {
- MASK_SERDES_START = 0x1,
- MASK_PCS_READY = 0x1,
-};
-
-enum {
- OFFSET_SERDES_START = 0x0,
-};
-
-struct ufs_qcom_phy_stored_attributes {
- u32 att;
- u32 value;
-};
-
-
-struct ufs_qcom_phy_calibration {
- u32 reg_offset;
- u32 cfg_value;
-};
-
-struct ufs_qcom_phy_vreg {
- const char *name;
- struct regulator *reg;
- int max_uA;
- int min_uV;
- int max_uV;
- bool enabled;
-};
-
-struct ufs_qcom_phy {
- struct list_head list;
- struct device *dev;
- void __iomem *mmio;
- void __iomem *dev_ref_clk_ctrl_mmio;
- struct clk *tx_iface_clk;
- struct clk *rx_iface_clk;
- bool is_iface_clk_enabled;
- struct clk *ref_clk_src;
- struct clk *ref_clk_parent;
- struct clk *ref_clk;
- bool is_ref_clk_enabled;
- bool is_dev_ref_clk_enabled;
- struct ufs_qcom_phy_vreg vdda_pll;
- struct ufs_qcom_phy_vreg vdda_phy;
- struct ufs_qcom_phy_vreg vddp_ref_clk;
- unsigned int quirks;
-
- /*
- * If UFS link is put into Hibern8 and if UFS PHY analog hardware is
- * power collapsed (by clearing UFS_PHY_POWER_DOWN_CONTROL), Hibern8
- * exit might fail even after powering on UFS PHY analog hardware.
- * Enabling this quirk will help to solve above issue by doing
- * custom PHY settings just before PHY analog power collapse.
- */
- #define UFS_QCOM_PHY_QUIRK_HIBERN8_EXIT_AFTER_PHY_PWR_COLLAPSE BIT(0)
-
- u8 host_ctrl_rev_major;
- u16 host_ctrl_rev_minor;
- u16 host_ctrl_rev_step;
-
- char name[UFS_QCOM_PHY_NAME_LEN];
- struct ufs_qcom_phy_calibration *cached_regs;
- int cached_regs_table_size;
- struct ufs_qcom_phy_specific_ops *phy_spec_ops;
-
- enum phy_mode mode;
- struct reset_control *ufs_reset;
-};
-
-/**
- * struct ufs_qcom_phy_specific_ops - set of pointers to functions which have a
- * specific implementation per phy. Each UFS phy, should implement
- * those functions according to its spec and requirements
- * @start_serdes: pointer to a function that starts the serdes
- * @is_physical_coding_sublayer_ready: pointer to a function that
- * checks pcs readiness. returns 0 for success and non-zero for error.
- * @set_tx_lane_enable: pointer to a function that enable tx lanes
- * @power_control: pointer to a function that controls analog rail of phy
- * and writes to QSERDES_RX_SIGDET_CNTRL attribute
- */
-struct ufs_qcom_phy_specific_ops {
- int (*calibrate)(struct ufs_qcom_phy *ufs_qcom_phy, bool is_rate_B);
- void (*start_serdes)(struct ufs_qcom_phy *phy);
- int (*is_physical_coding_sublayer_ready)(struct ufs_qcom_phy *phy);
- void (*set_tx_lane_enable)(struct ufs_qcom_phy *phy, u32 val);
- void (*power_control)(struct ufs_qcom_phy *phy, bool val);
-};
-
-struct ufs_qcom_phy *get_ufs_qcom_phy(struct phy *generic_phy);
-int ufs_qcom_phy_power_on(struct phy *generic_phy);
-int ufs_qcom_phy_power_off(struct phy *generic_phy);
-int ufs_qcom_phy_init_clks(struct ufs_qcom_phy *phy_common);
-int ufs_qcom_phy_init_vregulators(struct ufs_qcom_phy *phy_common);
-int ufs_qcom_phy_remove(struct phy *generic_phy,
- struct ufs_qcom_phy *ufs_qcom_phy);
-struct phy *ufs_qcom_phy_generic_probe(struct platform_device *pdev,
- struct ufs_qcom_phy *common_cfg,
- const struct phy_ops *ufs_qcom_phy_gen_ops,
- struct ufs_qcom_phy_specific_ops *phy_spec_ops);
-int ufs_qcom_phy_calibrate(struct ufs_qcom_phy *ufs_qcom_phy,
- struct ufs_qcom_phy_calibration *tbl_A, int tbl_size_A,
- struct ufs_qcom_phy_calibration *tbl_B, int tbl_size_B,
- bool is_rate_B);
-#endif
diff --git a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c
deleted file mode 100644
index 54b355bfc24c..000000000000
--- a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c
+++ /dev/null
@@ -1,172 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2013-2015, Linux Foundation. All rights reserved.
- */
-
-#include "phy-qcom-ufs-qmp-14nm.h"
-
-#define UFS_PHY_NAME "ufs_phy_qmp_14nm"
-#define UFS_PHY_VDDA_PHY_UV (925000)
-
-static
-int ufs_qcom_phy_qmp_14nm_phy_calibrate(struct ufs_qcom_phy *ufs_qcom_phy,
- bool is_rate_B)
-{
- int tbl_size_A = ARRAY_SIZE(phy_cal_table_rate_A);
- int tbl_size_B = ARRAY_SIZE(phy_cal_table_rate_B);
- int err;
-
- err = ufs_qcom_phy_calibrate(ufs_qcom_phy, phy_cal_table_rate_A,
- tbl_size_A, phy_cal_table_rate_B, tbl_size_B, is_rate_B);
-
- if (err)
- dev_err(ufs_qcom_phy->dev,
- "%s: ufs_qcom_phy_calibrate() failed %d\n",
- __func__, err);
- return err;
-}
-
-static
-void ufs_qcom_phy_qmp_14nm_advertise_quirks(struct ufs_qcom_phy *phy_common)
-{
- phy_common->quirks =
- UFS_QCOM_PHY_QUIRK_HIBERN8_EXIT_AFTER_PHY_PWR_COLLAPSE;
-}
-
-static
-int ufs_qcom_phy_qmp_14nm_set_mode(struct phy *generic_phy,
- enum phy_mode mode, int submode)
-{
- struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy);
-
- phy_common->mode = PHY_MODE_INVALID;
-
- if (mode > 0)
- phy_common->mode = mode;
-
- return 0;
-}
-
-static
-void ufs_qcom_phy_qmp_14nm_power_control(struct ufs_qcom_phy *phy, bool val)
-{
- writel_relaxed(val ? 0x1 : 0x0, phy->mmio + UFS_PHY_POWER_DOWN_CONTROL);
- /*
- * Before any transactions involving PHY, ensure PHY knows
- * that it's analog rail is powered ON (or OFF).
- */
- mb();
-}
-
-static inline
-void ufs_qcom_phy_qmp_14nm_set_tx_lane_enable(struct ufs_qcom_phy *phy, u32 val)
-{
- /*
- * 14nm PHY does not have TX_LANE_ENABLE register.
- * Implement this function so as not to propagate error to caller.
- */
-}
-
-static inline void ufs_qcom_phy_qmp_14nm_start_serdes(struct ufs_qcom_phy *phy)
-{
- u32 tmp;
-
- tmp = readl_relaxed(phy->mmio + UFS_PHY_PHY_START);
- tmp &= ~MASK_SERDES_START;
- tmp |= (1 << OFFSET_SERDES_START);
- writel_relaxed(tmp, phy->mmio + UFS_PHY_PHY_START);
- /* Ensure register value is committed */
- mb();
-}
-
-static int ufs_qcom_phy_qmp_14nm_is_pcs_ready(struct ufs_qcom_phy *phy_common)
-{
- int err = 0;
- u32 val;
-
- err = readl_poll_timeout(phy_common->mmio + UFS_PHY_PCS_READY_STATUS,
- val, (val & MASK_PCS_READY), 10, 1000000);
- if (err)
- dev_err(phy_common->dev, "%s: poll for pcs failed err = %d\n",
- __func__, err);
- return err;
-}
-
-static const struct phy_ops ufs_qcom_phy_qmp_14nm_phy_ops = {
- .power_on = ufs_qcom_phy_power_on,
- .power_off = ufs_qcom_phy_power_off,
- .set_mode = ufs_qcom_phy_qmp_14nm_set_mode,
- .owner = THIS_MODULE,
-};
-
-static struct ufs_qcom_phy_specific_ops phy_14nm_ops = {
- .calibrate = ufs_qcom_phy_qmp_14nm_phy_calibrate,
- .start_serdes = ufs_qcom_phy_qmp_14nm_start_serdes,
- .is_physical_coding_sublayer_ready = ufs_qcom_phy_qmp_14nm_is_pcs_ready,
- .set_tx_lane_enable = ufs_qcom_phy_qmp_14nm_set_tx_lane_enable,
- .power_control = ufs_qcom_phy_qmp_14nm_power_control,
-};
-
-static int ufs_qcom_phy_qmp_14nm_probe(struct platform_device *pdev)
-{
- struct device *dev = &pdev->dev;
- struct phy *generic_phy;
- struct ufs_qcom_phy_qmp_14nm *phy;
- struct ufs_qcom_phy *phy_common;
- int err = 0;
-
- phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
- if (!phy) {
- err = -ENOMEM;
- goto out;
- }
- phy_common = &phy->common_cfg;
-
- generic_phy = ufs_qcom_phy_generic_probe(pdev, phy_common,
- &ufs_qcom_phy_qmp_14nm_phy_ops, &phy_14nm_ops);
-
- if (!generic_phy) {
- err = -EIO;
- goto out;
- }
-
- err = ufs_qcom_phy_init_clks(phy_common);
- if (err)
- goto out;
-
- err = ufs_qcom_phy_init_vregulators(phy_common);
- if (err)
- goto out;
-
- phy_common->vdda_phy.max_uV = UFS_PHY_VDDA_PHY_UV;
- phy_common->vdda_phy.min_uV = UFS_PHY_VDDA_PHY_UV;
-
- ufs_qcom_phy_qmp_14nm_advertise_quirks(phy_common);
-
- phy_set_drvdata(generic_phy, phy);
-
- strlcpy(phy_common->name, UFS_PHY_NAME, sizeof(phy_common->name));
-
-out:
- return err;
-}
-
-static const struct of_device_id ufs_qcom_phy_qmp_14nm_of_match[] = {
- {.compatible = "qcom,ufs-phy-qmp-14nm"},
- {.compatible = "qcom,msm8996-ufs-phy-qmp-14nm"},
- {},
-};
-MODULE_DEVICE_TABLE(of, ufs_qcom_phy_qmp_14nm_of_match);
-
-static struct platform_driver ufs_qcom_phy_qmp_14nm_driver = {
- .probe = ufs_qcom_phy_qmp_14nm_probe,
- .driver = {
- .of_match_table = ufs_qcom_phy_qmp_14nm_of_match,
- .name = "ufs_qcom_phy_qmp_14nm",
- },
-};
-
-module_platform_driver(ufs_qcom_phy_qmp_14nm_driver);
-
-MODULE_DESCRIPTION("Universal Flash Storage (UFS) QCOM PHY QMP 14nm");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.h b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.h
deleted file mode 100644
index ceca654b9338..000000000000
--- a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.h
+++ /dev/null
@@ -1,168 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (c) 2013-2015, Linux Foundation. All rights reserved.
- */
-
-#ifndef UFS_QCOM_PHY_QMP_14NM_H_
-#define UFS_QCOM_PHY_QMP_14NM_H_
-
-#include "phy-qcom-ufs-i.h"
-
-/* QCOM UFS PHY control registers */
-#define COM_OFF(x) (0x000 + x)
-#define PHY_OFF(x) (0xC00 + x)
-#define TX_OFF(n, x) (0x400 + (0x400 * n) + x)
-#define RX_OFF(n, x) (0x600 + (0x400 * n) + x)
-
-/* UFS PHY QSERDES COM registers */
-#define QSERDES_COM_BG_TIMER COM_OFF(0x0C)
-#define QSERDES_COM_BIAS_EN_CLKBUFLR_EN COM_OFF(0x34)
-#define QSERDES_COM_SYS_CLK_CTRL COM_OFF(0x3C)
-#define QSERDES_COM_LOCK_CMP1_MODE0 COM_OFF(0x4C)
-#define QSERDES_COM_LOCK_CMP2_MODE0 COM_OFF(0x50)
-#define QSERDES_COM_LOCK_CMP3_MODE0 COM_OFF(0x54)
-#define QSERDES_COM_LOCK_CMP1_MODE1 COM_OFF(0x58)
-#define QSERDES_COM_LOCK_CMP2_MODE1 COM_OFF(0x5C)
-#define QSERDES_COM_LOCK_CMP3_MODE1 COM_OFF(0x60)
-#define QSERDES_COM_CP_CTRL_MODE0 COM_OFF(0x78)
-#define QSERDES_COM_CP_CTRL_MODE1 COM_OFF(0x7C)
-#define QSERDES_COM_PLL_RCTRL_MODE0 COM_OFF(0x84)
-#define QSERDES_COM_PLL_RCTRL_MODE1 COM_OFF(0x88)
-#define QSERDES_COM_PLL_CCTRL_MODE0 COM_OFF(0x90)
-#define QSERDES_COM_PLL_CCTRL_MODE1 COM_OFF(0x94)
-#define QSERDES_COM_SYSCLK_EN_SEL COM_OFF(0xAC)
-#define QSERDES_COM_RESETSM_CNTRL COM_OFF(0xB4)
-#define QSERDES_COM_LOCK_CMP_EN COM_OFF(0xC8)
-#define QSERDES_COM_LOCK_CMP_CFG COM_OFF(0xCC)
-#define QSERDES_COM_DEC_START_MODE0 COM_OFF(0xD0)
-#define QSERDES_COM_DEC_START_MODE1 COM_OFF(0xD4)
-#define QSERDES_COM_DIV_FRAC_START1_MODE0 COM_OFF(0xDC)
-#define QSERDES_COM_DIV_FRAC_START2_MODE0 COM_OFF(0xE0)
-#define QSERDES_COM_DIV_FRAC_START3_MODE0 COM_OFF(0xE4)
-#define QSERDES_COM_DIV_FRAC_START1_MODE1 COM_OFF(0xE8)
-#define QSERDES_COM_DIV_FRAC_START2_MODE1 COM_OFF(0xEC)
-#define QSERDES_COM_DIV_FRAC_START3_MODE1 COM_OFF(0xF0)
-#define QSERDES_COM_INTEGLOOP_GAIN0_MODE0 COM_OFF(0x108)
-#define QSERDES_COM_INTEGLOOP_GAIN1_MODE0 COM_OFF(0x10C)
-#define QSERDES_COM_INTEGLOOP_GAIN0_MODE1 COM_OFF(0x110)
-#define QSERDES_COM_INTEGLOOP_GAIN1_MODE1 COM_OFF(0x114)
-#define QSERDES_COM_VCO_TUNE_CTRL COM_OFF(0x124)
-#define QSERDES_COM_VCO_TUNE_MAP COM_OFF(0x128)
-#define QSERDES_COM_VCO_TUNE1_MODE0 COM_OFF(0x12C)
-#define QSERDES_COM_VCO_TUNE2_MODE0 COM_OFF(0x130)
-#define QSERDES_COM_VCO_TUNE1_MODE1 COM_OFF(0x134)
-#define QSERDES_COM_VCO_TUNE2_MODE1 COM_OFF(0x138)
-#define QSERDES_COM_VCO_TUNE_TIMER1 COM_OFF(0x144)
-#define QSERDES_COM_VCO_TUNE_TIMER2 COM_OFF(0x148)
-#define QSERDES_COM_CLK_SELECT COM_OFF(0x174)
-#define QSERDES_COM_HSCLK_SEL COM_OFF(0x178)
-#define QSERDES_COM_CORECLK_DIV COM_OFF(0x184)
-#define QSERDES_COM_CORE_CLK_EN COM_OFF(0x18C)
-#define QSERDES_COM_CMN_CONFIG COM_OFF(0x194)
-#define QSERDES_COM_SVS_MODE_CLK_SEL COM_OFF(0x19C)
-#define QSERDES_COM_CORECLK_DIV_MODE1 COM_OFF(0x1BC)
-
-/* UFS PHY registers */
-#define UFS_PHY_PHY_START PHY_OFF(0x00)
-#define UFS_PHY_POWER_DOWN_CONTROL PHY_OFF(0x04)
-#define UFS_PHY_PCS_READY_STATUS PHY_OFF(0x168)
-
-/* UFS PHY TX registers */
-#define QSERDES_TX_HIGHZ_TRANSCEIVER_BIAS_DRVR_EN TX_OFF(0, 0x68)
-#define QSERDES_TX_LANE_MODE TX_OFF(0, 0x94)
-
-/* UFS PHY RX registers */
-#define QSERDES_RX_UCDR_FASTLOCK_FO_GAIN RX_OFF(0, 0x40)
-#define QSERDES_RX_RX_TERM_BW RX_OFF(0, 0x90)
-#define QSERDES_RX_RX_EQ_GAIN1_LSB RX_OFF(0, 0xC4)
-#define QSERDES_RX_RX_EQ_GAIN1_MSB RX_OFF(0, 0xC8)
-#define QSERDES_RX_RX_EQ_GAIN2_LSB RX_OFF(0, 0xCC)
-#define QSERDES_RX_RX_EQ_GAIN2_MSB RX_OFF(0, 0xD0)
-#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2 RX_OFF(0, 0xD8)
-#define QSERDES_RX_SIGDET_CNTRL RX_OFF(0, 0x114)
-#define QSERDES_RX_SIGDET_LVL RX_OFF(0, 0x118)
-#define QSERDES_RX_SIGDET_DEGLITCH_CNTRL RX_OFF(0, 0x11C)
-#define QSERDES_RX_RX_INTERFACE_MODE RX_OFF(0, 0x12C)
-
-/*
- * This structure represents the 14nm specific phy.
- * common_cfg MUST remain the first field in this structure
- * in case extra fields are added. This way, when calling
- * get_ufs_qcom_phy() of generic phy, we can extract the
- * common phy structure (struct ufs_qcom_phy) out of it
- * regardless of the relevant specific phy.
- */
-struct ufs_qcom_phy_qmp_14nm {
- struct ufs_qcom_phy common_cfg;
-};
-
-static struct ufs_qcom_phy_calibration phy_cal_table_rate_A[] = {
- UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_POWER_DOWN_CONTROL, 0x01),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CMN_CONFIG, 0x0e),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYSCLK_EN_SEL, 0xd7),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CLK_SELECT, 0x30),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYS_CLK_CTRL, 0x06),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BG_TIMER, 0x0a),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_HSCLK_SEL, 0x05),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CORECLK_DIV, 0x0a),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CORECLK_DIV_MODE1, 0x0a),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP_EN, 0x01),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_CTRL, 0x10),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RESETSM_CNTRL, 0x20),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CORE_CLK_EN, 0x00),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP_CFG, 0x00),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_TIMER1, 0xff),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_TIMER2, 0x3f),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_MAP, 0x14),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SVS_MODE_CLK_SEL, 0x05),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START_MODE0, 0x82),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x00),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x00),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x00),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE1_MODE0, 0x28),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE2_MODE0, 0x02),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP1_MODE0, 0xff),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP2_MODE0, 0x0c),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START_MODE1, 0x98),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START1_MODE1, 0x00),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START2_MODE1, 0x00),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START3_MODE1, 0x00),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CP_CTRL_MODE1, 0x0b),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RCTRL_MODE1, 0x16),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CCTRL_MODE1, 0x28),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN0_MODE1, 0x80),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN1_MODE1, 0x00),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE1_MODE1, 0xd6),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE2_MODE1, 0x00),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP1_MODE1, 0x32),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP2_MODE1, 0x0f),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP3_MODE1, 0x00),
-
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_HIGHZ_TRANSCEIVER_BIAS_DRVR_EN, 0x45),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_LANE_MODE, 0x02),
-
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_SIGDET_LVL, 0x24),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_SIGDET_CNTRL, 0x02),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_INTERFACE_MODE, 0x00),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x18),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0B),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_TERM_BW, 0x5B),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_LSB, 0xFF),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_MSB, 0x3F),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_LSB, 0xFF),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_MSB, 0x0F),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0E),
-};
-
-static struct ufs_qcom_phy_calibration phy_cal_table_rate_B[] = {
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_MAP, 0x54),
-};
-
-#endif
diff --git a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c
deleted file mode 100644
index 3e9d8b71e995..000000000000
--- a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c
+++ /dev/null
@@ -1,226 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2013-2015, Linux Foundation. All rights reserved.
- */
-
-#include "phy-qcom-ufs-qmp-20nm.h"
-
-#define UFS_PHY_NAME "ufs_phy_qmp_20nm"
-
-static
-int ufs_qcom_phy_qmp_20nm_phy_calibrate(struct ufs_qcom_phy *ufs_qcom_phy,
- bool is_rate_B)
-{
- struct ufs_qcom_phy_calibration *tbl_A, *tbl_B;
- int tbl_size_A, tbl_size_B;
- u8 major = ufs_qcom_phy->host_ctrl_rev_major;
- u16 minor = ufs_qcom_phy->host_ctrl_rev_minor;
- u16 step = ufs_qcom_phy->host_ctrl_rev_step;
- int err;
-
- if ((major == 0x1) && (minor == 0x002) && (step == 0x0000)) {
- tbl_size_A = ARRAY_SIZE(phy_cal_table_rate_A_1_2_0);
- tbl_A = phy_cal_table_rate_A_1_2_0;
- } else if ((major == 0x1) && (minor == 0x003) && (step == 0x0000)) {
- tbl_size_A = ARRAY_SIZE(phy_cal_table_rate_A_1_3_0);
- tbl_A = phy_cal_table_rate_A_1_3_0;
- } else {
- dev_err(ufs_qcom_phy->dev, "%s: Unknown UFS-PHY version, no calibration values\n",
- __func__);
- err = -ENODEV;
- goto out;
- }
-
- tbl_size_B = ARRAY_SIZE(phy_cal_table_rate_B);
- tbl_B = phy_cal_table_rate_B;
-
- err = ufs_qcom_phy_calibrate(ufs_qcom_phy, tbl_A, tbl_size_A,
- tbl_B, tbl_size_B, is_rate_B);
-
- if (err)
- dev_err(ufs_qcom_phy->dev, "%s: ufs_qcom_phy_calibrate() failed %d\n",
- __func__, err);
-
-out:
- return err;
-}
-
-static
-void ufs_qcom_phy_qmp_20nm_advertise_quirks(struct ufs_qcom_phy *phy_common)
-{
- phy_common->quirks =
- UFS_QCOM_PHY_QUIRK_HIBERN8_EXIT_AFTER_PHY_PWR_COLLAPSE;
-}
-
-static
-int ufs_qcom_phy_qmp_20nm_set_mode(struct phy *generic_phy,
- enum phy_mode mode, int submode)
-{
- struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy);
-
- phy_common->mode = PHY_MODE_INVALID;
-
- if (mode > 0)
- phy_common->mode = mode;
-
- return 0;
-}
-
-static
-void ufs_qcom_phy_qmp_20nm_power_control(struct ufs_qcom_phy *phy, bool val)
-{
- bool hibern8_exit_after_pwr_collapse = phy->quirks &
- UFS_QCOM_PHY_QUIRK_HIBERN8_EXIT_AFTER_PHY_PWR_COLLAPSE;
-
- if (val) {
- writel_relaxed(0x1, phy->mmio + UFS_PHY_POWER_DOWN_CONTROL);
- /*
- * Before any transactions involving PHY, ensure PHY knows
- * that it's analog rail is powered ON.
- */
- mb();
-
- if (hibern8_exit_after_pwr_collapse) {
- /*
- * Give atleast 1us delay after restoring PHY analog
- * power.
- */
- usleep_range(1, 2);
- writel_relaxed(0x0A, phy->mmio +
- QSERDES_COM_SYSCLK_EN_SEL_TXBAND);
- writel_relaxed(0x08, phy->mmio +
- QSERDES_COM_SYSCLK_EN_SEL_TXBAND);
- /*
- * Make sure workaround is deactivated before proceeding
- * with normal PHY operations.
- */
- mb();
- }
- } else {
- if (hibern8_exit_after_pwr_collapse) {
- writel_relaxed(0x0A, phy->mmio +
- QSERDES_COM_SYSCLK_EN_SEL_TXBAND);
- writel_relaxed(0x02, phy->mmio +
- QSERDES_COM_SYSCLK_EN_SEL_TXBAND);
- /*
- * Make sure that above workaround is activated before
- * PHY analog power collapse.
- */
- mb();
- }
-
- writel_relaxed(0x0, phy->mmio + UFS_PHY_POWER_DOWN_CONTROL);
- /*
- * ensure that PHY knows its PHY analog rail is going
- * to be powered down
- */
- mb();
- }
-}
-
-static
-void ufs_qcom_phy_qmp_20nm_set_tx_lane_enable(struct ufs_qcom_phy *phy, u32 val)
-{
- writel_relaxed(val & UFS_PHY_TX_LANE_ENABLE_MASK,
- phy->mmio + UFS_PHY_TX_LANE_ENABLE);
- mb();
-}
-
-static inline void ufs_qcom_phy_qmp_20nm_start_serdes(struct ufs_qcom_phy *phy)
-{
- u32 tmp;
-
- tmp = readl_relaxed(phy->mmio + UFS_PHY_PHY_START);
- tmp &= ~MASK_SERDES_START;
- tmp |= (1 << OFFSET_SERDES_START);
- writel_relaxed(tmp, phy->mmio + UFS_PHY_PHY_START);
- mb();
-}
-
-static int ufs_qcom_phy_qmp_20nm_is_pcs_ready(struct ufs_qcom_phy *phy_common)
-{
- int err = 0;
- u32 val;
-
- err = readl_poll_timeout(phy_common->mmio + UFS_PHY_PCS_READY_STATUS,
- val, (val & MASK_PCS_READY), 10, 1000000);
- if (err)
- dev_err(phy_common->dev, "%s: poll for pcs failed err = %d\n",
- __func__, err);
- return err;
-}
-
-static const struct phy_ops ufs_qcom_phy_qmp_20nm_phy_ops = {
- .power_on = ufs_qcom_phy_power_on,
- .power_off = ufs_qcom_phy_power_off,
- .set_mode = ufs_qcom_phy_qmp_20nm_set_mode,
- .owner = THIS_MODULE,
-};
-
-static struct ufs_qcom_phy_specific_ops phy_20nm_ops = {
- .calibrate = ufs_qcom_phy_qmp_20nm_phy_calibrate,
- .start_serdes = ufs_qcom_phy_qmp_20nm_start_serdes,
- .is_physical_coding_sublayer_ready = ufs_qcom_phy_qmp_20nm_is_pcs_ready,
- .set_tx_lane_enable = ufs_qcom_phy_qmp_20nm_set_tx_lane_enable,
- .power_control = ufs_qcom_phy_qmp_20nm_power_control,
-};
-
-static int ufs_qcom_phy_qmp_20nm_probe(struct platform_device *pdev)
-{
- struct device *dev = &pdev->dev;
- struct phy *generic_phy;
- struct ufs_qcom_phy_qmp_20nm *phy;
- struct ufs_qcom_phy *phy_common;
- int err = 0;
-
- phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
- if (!phy) {
- err = -ENOMEM;
- goto out;
- }
- phy_common = &phy->common_cfg;
-
- generic_phy = ufs_qcom_phy_generic_probe(pdev, phy_common,
- &ufs_qcom_phy_qmp_20nm_phy_ops, &phy_20nm_ops);
-
- if (!generic_phy) {
- err = -EIO;
- goto out;
- }
-
- err = ufs_qcom_phy_init_clks(phy_common);
- if (err)
- goto out;
-
- err = ufs_qcom_phy_init_vregulators(phy_common);
- if (err)
- goto out;
-
- ufs_qcom_phy_qmp_20nm_advertise_quirks(phy_common);
-
- phy_set_drvdata(generic_phy, phy);
-
- strlcpy(phy_common->name, UFS_PHY_NAME, sizeof(phy_common->name));
-
-out:
- return err;
-}
-
-static const struct of_device_id ufs_qcom_phy_qmp_20nm_of_match[] = {
- {.compatible = "qcom,ufs-phy-qmp-20nm"},
- {},
-};
-MODULE_DEVICE_TABLE(of, ufs_qcom_phy_qmp_20nm_of_match);
-
-static struct platform_driver ufs_qcom_phy_qmp_20nm_driver = {
- .probe = ufs_qcom_phy_qmp_20nm_probe,
- .driver = {
- .of_match_table = ufs_qcom_phy_qmp_20nm_of_match,
- .name = "ufs_qcom_phy_qmp_20nm",
- },
-};
-
-module_platform_driver(ufs_qcom_phy_qmp_20nm_driver);
-
-MODULE_DESCRIPTION("Universal Flash Storage (UFS) QCOM PHY QMP 20nm");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.h b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.h
deleted file mode 100644
index 8ce79f524eed..000000000000
--- a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.h
+++ /dev/null
@@ -1,226 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (c) 2013-2015, Linux Foundation. All rights reserved.
- */
-
-#ifndef UFS_QCOM_PHY_QMP_20NM_H_
-#define UFS_QCOM_PHY_QMP_20NM_H_
-
-#include "phy-qcom-ufs-i.h"
-
-/* QCOM UFS PHY control registers */
-
-#define COM_OFF(x) (0x000 + x)
-#define PHY_OFF(x) (0xC00 + x)
-#define TX_OFF(n, x) (0x400 + (0x400 * n) + x)
-#define RX_OFF(n, x) (0x600 + (0x400 * n) + x)
-
-/* UFS PHY PLL block registers */
-#define QSERDES_COM_SYS_CLK_CTRL COM_OFF(0x0)
-#define QSERDES_COM_PLL_VCOTAIL_EN COM_OFF(0x04)
-#define QSERDES_COM_PLL_CNTRL COM_OFF(0x14)
-#define QSERDES_COM_PLL_IP_SETI COM_OFF(0x24)
-#define QSERDES_COM_CORE_CLK_IN_SYNC_SEL COM_OFF(0x28)
-#define QSERDES_COM_BIAS_EN_CLKBUFLR_EN COM_OFF(0x30)
-#define QSERDES_COM_PLL_CP_SETI COM_OFF(0x34)
-#define QSERDES_COM_PLL_IP_SETP COM_OFF(0x38)
-#define QSERDES_COM_PLL_CP_SETP COM_OFF(0x3C)
-#define QSERDES_COM_SYSCLK_EN_SEL_TXBAND COM_OFF(0x48)
-#define QSERDES_COM_RESETSM_CNTRL COM_OFF(0x4C)
-#define QSERDES_COM_RESETSM_CNTRL2 COM_OFF(0x50)
-#define QSERDES_COM_PLLLOCK_CMP1 COM_OFF(0x90)
-#define QSERDES_COM_PLLLOCK_CMP2 COM_OFF(0x94)
-#define QSERDES_COM_PLLLOCK_CMP3 COM_OFF(0x98)
-#define QSERDES_COM_PLLLOCK_CMP_EN COM_OFF(0x9C)
-#define QSERDES_COM_BGTC COM_OFF(0xA0)
-#define QSERDES_COM_DEC_START1 COM_OFF(0xAC)
-#define QSERDES_COM_PLL_AMP_OS COM_OFF(0xB0)
-#define QSERDES_COM_RES_CODE_UP_OFFSET COM_OFF(0xD8)
-#define QSERDES_COM_RES_CODE_DN_OFFSET COM_OFF(0xDC)
-#define QSERDES_COM_DIV_FRAC_START1 COM_OFF(0x100)
-#define QSERDES_COM_DIV_FRAC_START2 COM_OFF(0x104)
-#define QSERDES_COM_DIV_FRAC_START3 COM_OFF(0x108)
-#define QSERDES_COM_DEC_START2 COM_OFF(0x10C)
-#define QSERDES_COM_PLL_RXTXEPCLK_EN COM_OFF(0x110)
-#define QSERDES_COM_PLL_CRCTRL COM_OFF(0x114)
-#define QSERDES_COM_PLL_CLKEPDIV COM_OFF(0x118)
-
-/* TX LANE n (0, 1) registers */
-#define QSERDES_TX_EMP_POST1_LVL(n) TX_OFF(n, 0x08)
-#define QSERDES_TX_DRV_LVL(n) TX_OFF(n, 0x0C)
-#define QSERDES_TX_LANE_MODE(n) TX_OFF(n, 0x54)
-
-/* RX LANE n (0, 1) registers */
-#define QSERDES_RX_CDR_CONTROL1(n) RX_OFF(n, 0x0)
-#define QSERDES_RX_CDR_CONTROL_HALF(n) RX_OFF(n, 0x8)
-#define QSERDES_RX_RX_EQ_GAIN1_LSB(n) RX_OFF(n, 0xA8)
-#define QSERDES_RX_RX_EQ_GAIN1_MSB(n) RX_OFF(n, 0xAC)
-#define QSERDES_RX_RX_EQ_GAIN2_LSB(n) RX_OFF(n, 0xB0)
-#define QSERDES_RX_RX_EQ_GAIN2_MSB(n) RX_OFF(n, 0xB4)
-#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2(n) RX_OFF(n, 0xBC)
-#define QSERDES_RX_CDR_CONTROL_QUARTER(n) RX_OFF(n, 0xC)
-#define QSERDES_RX_SIGDET_CNTRL(n) RX_OFF(n, 0x100)
-
-/* UFS PHY registers */
-#define UFS_PHY_PHY_START PHY_OFF(0x00)
-#define UFS_PHY_POWER_DOWN_CONTROL PHY_OFF(0x4)
-#define UFS_PHY_TX_LANE_ENABLE PHY_OFF(0x44)
-#define UFS_PHY_PWM_G1_CLK_DIVIDER PHY_OFF(0x08)
-#define UFS_PHY_PWM_G2_CLK_DIVIDER PHY_OFF(0x0C)
-#define UFS_PHY_PWM_G3_CLK_DIVIDER PHY_OFF(0x10)
-#define UFS_PHY_PWM_G4_CLK_DIVIDER PHY_OFF(0x14)
-#define UFS_PHY_CORECLK_PWM_G1_CLK_DIVIDER PHY_OFF(0x34)
-#define UFS_PHY_CORECLK_PWM_G2_CLK_DIVIDER PHY_OFF(0x38)
-#define UFS_PHY_CORECLK_PWM_G3_CLK_DIVIDER PHY_OFF(0x3C)
-#define UFS_PHY_CORECLK_PWM_G4_CLK_DIVIDER PHY_OFF(0x40)
-#define UFS_PHY_OMC_STATUS_RDVAL PHY_OFF(0x68)
-#define UFS_PHY_LINE_RESET_TIME PHY_OFF(0x28)
-#define UFS_PHY_LINE_RESET_GRANULARITY PHY_OFF(0x2C)
-#define UFS_PHY_TSYNC_RSYNC_CNTL PHY_OFF(0x48)
-#define UFS_PHY_PLL_CNTL PHY_OFF(0x50)
-#define UFS_PHY_TX_LARGE_AMP_DRV_LVL PHY_OFF(0x54)
-#define UFS_PHY_TX_SMALL_AMP_DRV_LVL PHY_OFF(0x5C)
-#define UFS_PHY_TX_LARGE_AMP_POST_EMP_LVL PHY_OFF(0x58)
-#define UFS_PHY_TX_SMALL_AMP_POST_EMP_LVL PHY_OFF(0x60)
-#define UFS_PHY_CFG_CHANGE_CNT_VAL PHY_OFF(0x64)
-#define UFS_PHY_RX_SYNC_WAIT_TIME PHY_OFF(0x6C)
-#define UFS_PHY_TX_MIN_SLEEP_NOCONFIG_TIME_CAPABILITY PHY_OFF(0xB4)
-#define UFS_PHY_RX_MIN_SLEEP_NOCONFIG_TIME_CAPABILITY PHY_OFF(0xE0)
-#define UFS_PHY_TX_MIN_STALL_NOCONFIG_TIME_CAPABILITY PHY_OFF(0xB8)
-#define UFS_PHY_RX_MIN_STALL_NOCONFIG_TIME_CAPABILITY PHY_OFF(0xE4)
-#define UFS_PHY_TX_MIN_SAVE_CONFIG_TIME_CAPABILITY PHY_OFF(0xBC)
-#define UFS_PHY_RX_MIN_SAVE_CONFIG_TIME_CAPABILITY PHY_OFF(0xE8)
-#define UFS_PHY_RX_PWM_BURST_CLOSURE_LENGTH_CAPABILITY PHY_OFF(0xFC)
-#define UFS_PHY_RX_MIN_ACTIVATETIME_CAPABILITY PHY_OFF(0x100)
-#define UFS_PHY_RX_SIGDET_CTRL3 PHY_OFF(0x14c)
-#define UFS_PHY_RMMI_ATTR_CTRL PHY_OFF(0x160)
-#define UFS_PHY_RMMI_RX_CFGUPDT_L1 (1 << 7)
-#define UFS_PHY_RMMI_TX_CFGUPDT_L1 (1 << 6)
-#define UFS_PHY_RMMI_CFGWR_L1 (1 << 5)
-#define UFS_PHY_RMMI_CFGRD_L1 (1 << 4)
-#define UFS_PHY_RMMI_RX_CFGUPDT_L0 (1 << 3)
-#define UFS_PHY_RMMI_TX_CFGUPDT_L0 (1 << 2)
-#define UFS_PHY_RMMI_CFGWR_L0 (1 << 1)
-#define UFS_PHY_RMMI_CFGRD_L0 (1 << 0)
-#define UFS_PHY_RMMI_ATTRID PHY_OFF(0x164)
-#define UFS_PHY_RMMI_ATTRWRVAL PHY_OFF(0x168)
-#define UFS_PHY_RMMI_ATTRRDVAL_L0_STATUS PHY_OFF(0x16C)
-#define UFS_PHY_RMMI_ATTRRDVAL_L1_STATUS PHY_OFF(0x170)
-#define UFS_PHY_PCS_READY_STATUS PHY_OFF(0x174)
-
-#define UFS_PHY_TX_LANE_ENABLE_MASK 0x3
-
-/*
- * This structure represents the 20nm specific phy.
- * common_cfg MUST remain the first field in this structure
- * in case extra fields are added. This way, when calling
- * get_ufs_qcom_phy() of generic phy, we can extract the
- * common phy structure (struct ufs_qcom_phy) out of it
- * regardless of the relevant specific phy.
- */
-struct ufs_qcom_phy_qmp_20nm {
- struct ufs_qcom_phy common_cfg;
-};
-
-static struct ufs_qcom_phy_calibration phy_cal_table_rate_A_1_2_0[] = {
- UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_POWER_DOWN_CONTROL, 0x01),
- UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_SIGDET_CTRL3, 0x0D),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_VCOTAIL_EN, 0xe1),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CRCTRL, 0xcc),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYSCLK_EN_SEL_TXBAND, 0x08),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CLKEPDIV, 0x03),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RXTXEPCLK_EN, 0x10),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START1, 0x82),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START2, 0x03),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START1, 0x80),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START2, 0x80),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START3, 0x40),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP1, 0xff),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP2, 0x19),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP3, 0x00),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP_EN, 0x03),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RESETSM_CNTRL, 0x90),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RESETSM_CNTRL2, 0x03),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL1(0), 0xf2),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_HALF(0), 0x0c),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_QUARTER(0), 0x12),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL1(1), 0xf2),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_HALF(1), 0x0c),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_QUARTER(1), 0x12),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_LSB(0), 0xff),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_MSB(0), 0xff),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_LSB(0), 0xff),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_MSB(0), 0x00),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_LSB(1), 0xff),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_MSB(1), 0xff),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_LSB(1), 0xff),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_MSB(1), 0x00),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CP_SETI, 0x3f),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_IP_SETP, 0x1b),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CP_SETP, 0x0f),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_IP_SETI, 0x01),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_EMP_POST1_LVL(0), 0x2F),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_DRV_LVL(0), 0x20),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_EMP_POST1_LVL(1), 0x2F),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_DRV_LVL(1), 0x20),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_LANE_MODE(0), 0x68),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_LANE_MODE(1), 0x68),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2(1), 0xdc),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2(0), 0xdc),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x3),
-};
-
-static struct ufs_qcom_phy_calibration phy_cal_table_rate_A_1_3_0[] = {
- UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_POWER_DOWN_CONTROL, 0x01),
- UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_SIGDET_CTRL3, 0x0D),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_VCOTAIL_EN, 0xe1),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CRCTRL, 0xcc),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYSCLK_EN_SEL_TXBAND, 0x08),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CLKEPDIV, 0x03),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RXTXEPCLK_EN, 0x10),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START1, 0x82),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START2, 0x03),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START1, 0x80),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START2, 0x80),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START3, 0x40),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP1, 0xff),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP2, 0x19),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP3, 0x00),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP_EN, 0x03),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RESETSM_CNTRL, 0x90),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RESETSM_CNTRL2, 0x03),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL1(0), 0xf2),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_HALF(0), 0x0c),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_QUARTER(0), 0x12),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL1(1), 0xf2),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_HALF(1), 0x0c),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_QUARTER(1), 0x12),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_LSB(0), 0xff),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_MSB(0), 0xff),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_LSB(0), 0xff),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_MSB(0), 0x00),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_LSB(1), 0xff),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_MSB(1), 0xff),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_LSB(1), 0xff),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_MSB(1), 0x00),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CP_SETI, 0x2b),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_IP_SETP, 0x38),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CP_SETP, 0x3c),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RES_CODE_UP_OFFSET, 0x02),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RES_CODE_DN_OFFSET, 0x02),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_IP_SETI, 0x01),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CNTRL, 0x40),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_LANE_MODE(0), 0x68),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_LANE_MODE(1), 0x68),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2(1), 0xdc),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2(0), 0xdc),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x3),
-};
-
-static struct ufs_qcom_phy_calibration phy_cal_table_rate_B[] = {
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START1, 0x98),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP1, 0x65),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP2, 0x1e),
-};
-
-#endif
diff --git a/drivers/phy/qualcomm/phy-qcom-ufs.c b/drivers/phy/qualcomm/phy-qcom-ufs.c
deleted file mode 100644
index 763c8d396af1..000000000000
--- a/drivers/phy/qualcomm/phy-qcom-ufs.c
+++ /dev/null
@@ -1,648 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2013-2015, Linux Foundation. All rights reserved.
- */
-
-#include "phy-qcom-ufs-i.h"
-
-#define MAX_PROP_NAME 32
-#define VDDA_PHY_MIN_UV 1000000
-#define VDDA_PHY_MAX_UV 1000000
-#define VDDA_PLL_MIN_UV 1800000
-#define VDDA_PLL_MAX_UV 1800000
-#define VDDP_REF_CLK_MIN_UV 1200000
-#define VDDP_REF_CLK_MAX_UV 1200000
-
-int ufs_qcom_phy_calibrate(struct ufs_qcom_phy *ufs_qcom_phy,
- struct ufs_qcom_phy_calibration *tbl_A,
- int tbl_size_A,
- struct ufs_qcom_phy_calibration *tbl_B,
- int tbl_size_B, bool is_rate_B)
-{
- int i;
- int ret = 0;
-
- if (!tbl_A) {
- dev_err(ufs_qcom_phy->dev, "%s: tbl_A is NULL", __func__);
- ret = EINVAL;
- goto out;
- }
-
- for (i = 0; i < tbl_size_A; i++)
- writel_relaxed(tbl_A[i].cfg_value,
- ufs_qcom_phy->mmio + tbl_A[i].reg_offset);
-
- /*
- * In case we would like to work in rate B, we need
- * to override a registers that were configured in rate A table
- * with registers of rate B table.
- * table.
- */
- if (is_rate_B) {
- if (!tbl_B) {
- dev_err(ufs_qcom_phy->dev, "%s: tbl_B is NULL",
- __func__);
- ret = EINVAL;
- goto out;
- }
-
- for (i = 0; i < tbl_size_B; i++)
- writel_relaxed(tbl_B[i].cfg_value,
- ufs_qcom_phy->mmio + tbl_B[i].reg_offset);
- }
-
- /* flush buffered writes */
- mb();
-
-out:
- return ret;
-}
-EXPORT_SYMBOL_GPL(ufs_qcom_phy_calibrate);
-
-/*
- * This assumes the embedded phy structure inside generic_phy is of type
- * struct ufs_qcom_phy. In order to function properly it's crucial
- * to keep the embedded struct "struct ufs_qcom_phy common_cfg"
- * as the first inside generic_phy.
- */
-struct ufs_qcom_phy *get_ufs_qcom_phy(struct phy *generic_phy)
-{
- return (struct ufs_qcom_phy *)phy_get_drvdata(generic_phy);
-}
-EXPORT_SYMBOL_GPL(get_ufs_qcom_phy);
-
-static
-int ufs_qcom_phy_base_init(struct platform_device *pdev,
- struct ufs_qcom_phy *phy_common)
-{
- struct device *dev = &pdev->dev;
- struct resource *res;
- int err = 0;
-
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy_mem");
- phy_common->mmio = devm_ioremap_resource(dev, res);
- if (IS_ERR((void const *)phy_common->mmio)) {
- err = PTR_ERR((void const *)phy_common->mmio);
- phy_common->mmio = NULL;
- dev_err(dev, "%s: ioremap for phy_mem resource failed %d\n",
- __func__, err);
- return err;
- }
-
- /* "dev_ref_clk_ctrl_mem" is optional resource */
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
- "dev_ref_clk_ctrl_mem");
- phy_common->dev_ref_clk_ctrl_mmio = devm_ioremap_resource(dev, res);
- if (IS_ERR((void const *)phy_common->dev_ref_clk_ctrl_mmio))
- phy_common->dev_ref_clk_ctrl_mmio = NULL;
-
- return 0;
-}
-
-struct phy *ufs_qcom_phy_generic_probe(struct platform_device *pdev,
- struct ufs_qcom_phy *common_cfg,
- const struct phy_ops *ufs_qcom_phy_gen_ops,
- struct ufs_qcom_phy_specific_ops *phy_spec_ops)
-{
- int err;
- struct device *dev = &pdev->dev;
- struct phy *generic_phy = NULL;
- struct phy_provider *phy_provider;
-
- err = ufs_qcom_phy_base_init(pdev, common_cfg);
- if (err) {
- dev_err(dev, "%s: phy base init failed %d\n", __func__, err);
- goto out;
- }
-
- phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
- if (IS_ERR(phy_provider)) {
- err = PTR_ERR(phy_provider);
- dev_err(dev, "%s: failed to register phy %d\n", __func__, err);
- goto out;
- }
-
- generic_phy = devm_phy_create(dev, NULL, ufs_qcom_phy_gen_ops);
- if (IS_ERR(generic_phy)) {
- err = PTR_ERR(generic_phy);
- dev_err(dev, "%s: failed to create phy %d\n", __func__, err);
- generic_phy = NULL;
- goto out;
- }
-
- common_cfg->phy_spec_ops = phy_spec_ops;
- common_cfg->dev = dev;
-
-out:
- return generic_phy;
-}
-EXPORT_SYMBOL_GPL(ufs_qcom_phy_generic_probe);
-
-static int ufs_qcom_phy_get_reset(struct ufs_qcom_phy *phy_common)
-{
- struct reset_control *reset;
-
- if (phy_common->ufs_reset)
- return 0;
-
- reset = devm_reset_control_get_exclusive_by_index(phy_common->dev, 0);
- if (IS_ERR(reset))
- return PTR_ERR(reset);
-
- phy_common->ufs_reset = reset;
- return 0;
-}
-
-static int __ufs_qcom_phy_clk_get(struct device *dev,
- const char *name, struct clk **clk_out, bool err_print)
-{
- struct clk *clk;
- int err = 0;
-
- clk = devm_clk_get(dev, name);
- if (IS_ERR(clk)) {
- err = PTR_ERR(clk);
- if (err_print)
- dev_err(dev, "failed to get %s err %d", name, err);
- } else {
- *clk_out = clk;
- }
-
- return err;
-}
-
-static int ufs_qcom_phy_clk_get(struct device *dev,
- const char *name, struct clk **clk_out)
-{
- return __ufs_qcom_phy_clk_get(dev, name, clk_out, true);
-}
-
-int ufs_qcom_phy_init_clks(struct ufs_qcom_phy *phy_common)
-{
- int err;
-
- if (of_device_is_compatible(phy_common->dev->of_node,
- "qcom,msm8996-ufs-phy-qmp-14nm"))
- goto skip_txrx_clk;
-
- err = ufs_qcom_phy_clk_get(phy_common->dev, "tx_iface_clk",
- &phy_common->tx_iface_clk);
- if (err)
- goto out;
-
- err = ufs_qcom_phy_clk_get(phy_common->dev, "rx_iface_clk",
- &phy_common->rx_iface_clk);
- if (err)
- goto out;
-
-skip_txrx_clk:
- err = ufs_qcom_phy_clk_get(phy_common->dev, "ref_clk_src",
- &phy_common->ref_clk_src);
- if (err)
- goto out;
-
- /*
- * "ref_clk_parent" is optional hence don't abort init if it's not
- * found.
- */
- __ufs_qcom_phy_clk_get(phy_common->dev, "ref_clk_parent",
- &phy_common->ref_clk_parent, false);
-
- err = ufs_qcom_phy_clk_get(phy_common->dev, "ref_clk",
- &phy_common->ref_clk);
-
-out:
- return err;
-}
-EXPORT_SYMBOL_GPL(ufs_qcom_phy_init_clks);
-
-static int ufs_qcom_phy_init_vreg(struct device *dev,
- struct ufs_qcom_phy_vreg *vreg,
- const char *name)
-{
- int err = 0;
-
- char prop_name[MAX_PROP_NAME];
-
- vreg->name = name;
- vreg->reg = devm_regulator_get(dev, name);
- if (IS_ERR(vreg->reg)) {
- err = PTR_ERR(vreg->reg);
- dev_err(dev, "failed to get %s, %d\n", name, err);
- goto out;
- }
-
- if (dev->of_node) {
- snprintf(prop_name, MAX_PROP_NAME, "%s-max-microamp", name);
- err = of_property_read_u32(dev->of_node,
- prop_name, &vreg->max_uA);
- if (err && err != -EINVAL) {
- dev_err(dev, "%s: failed to read %s\n",
- __func__, prop_name);
- goto out;
- } else if (err == -EINVAL || !vreg->max_uA) {
- if (regulator_count_voltages(vreg->reg) > 0) {
- dev_err(dev, "%s: %s is mandatory\n",
- __func__, prop_name);
- goto out;
- }
- err = 0;
- }
- }
-
- if (!strcmp(name, "vdda-pll")) {
- vreg->max_uV = VDDA_PLL_MAX_UV;
- vreg->min_uV = VDDA_PLL_MIN_UV;
- } else if (!strcmp(name, "vdda-phy")) {
- vreg->max_uV = VDDA_PHY_MAX_UV;
- vreg->min_uV = VDDA_PHY_MIN_UV;
- } else if (!strcmp(name, "vddp-ref-clk")) {
- vreg->max_uV = VDDP_REF_CLK_MAX_UV;
- vreg->min_uV = VDDP_REF_CLK_MIN_UV;
- }
-
-out:
- return err;
-}
-
-int ufs_qcom_phy_init_vregulators(struct ufs_qcom_phy *phy_common)
-{
- int err;
-
- err = ufs_qcom_phy_init_vreg(phy_common->dev, &phy_common->vdda_pll,
- "vdda-pll");
- if (err)
- goto out;
-
- err = ufs_qcom_phy_init_vreg(phy_common->dev, &phy_common->vdda_phy,
- "vdda-phy");
-
- if (err)
- goto out;
-
- err = ufs_qcom_phy_init_vreg(phy_common->dev, &phy_common->vddp_ref_clk,
- "vddp-ref-clk");
-
-out:
- return err;
-}
-EXPORT_SYMBOL_GPL(ufs_qcom_phy_init_vregulators);
-
-static int ufs_qcom_phy_cfg_vreg(struct device *dev,
- struct ufs_qcom_phy_vreg *vreg, bool on)
-{
- int ret = 0;
- struct regulator *reg = vreg->reg;
- const char *name = vreg->name;
- int min_uV;
- int uA_load;
-
- if (regulator_count_voltages(reg) > 0) {
- min_uV = on ? vreg->min_uV : 0;
- ret = regulator_set_voltage(reg, min_uV, vreg->max_uV);
- if (ret) {
- dev_err(dev, "%s: %s set voltage failed, err=%d\n",
- __func__, name, ret);
- goto out;
- }
- uA_load = on ? vreg->max_uA : 0;
- ret = regulator_set_load(reg, uA_load);
- if (ret >= 0) {
- /*
- * regulator_set_load() returns new regulator
- * mode upon success.
- */
- ret = 0;
- } else {
- dev_err(dev, "%s: %s set optimum mode(uA_load=%d) failed, err=%d\n",
- __func__, name, uA_load, ret);
- goto out;
- }
- }
-out:
- return ret;
-}
-
-static int ufs_qcom_phy_enable_vreg(struct device *dev,
- struct ufs_qcom_phy_vreg *vreg)
-{
- int ret = 0;
-
- if (!vreg || vreg->enabled)
- goto out;
-
- ret = ufs_qcom_phy_cfg_vreg(dev, vreg, true);
- if (ret) {
- dev_err(dev, "%s: ufs_qcom_phy_cfg_vreg() failed, err=%d\n",
- __func__, ret);
- goto out;
- }
-
- ret = regulator_enable(vreg->reg);
- if (ret) {
- dev_err(dev, "%s: enable failed, err=%d\n",
- __func__, ret);
- goto out;
- }
-
- vreg->enabled = true;
-out:
- return ret;
-}
-
-static int ufs_qcom_phy_enable_ref_clk(struct ufs_qcom_phy *phy)
-{
- int ret = 0;
-
- if (phy->is_ref_clk_enabled)
- goto out;
-
- /*
- * reference clock is propagated in a daisy-chained manner from
- * source to phy, so ungate them at each stage.
- */
- ret = clk_prepare_enable(phy->ref_clk_src);
- if (ret) {
- dev_err(phy->dev, "%s: ref_clk_src enable failed %d\n",
- __func__, ret);
- goto out;
- }
-
- /*
- * "ref_clk_parent" is optional clock hence make sure that clk reference
- * is available before trying to enable the clock.
- */
- if (phy->ref_clk_parent) {
- ret = clk_prepare_enable(phy->ref_clk_parent);
- if (ret) {
- dev_err(phy->dev, "%s: ref_clk_parent enable failed %d\n",
- __func__, ret);
- goto out_disable_src;
- }
- }
-
- ret = clk_prepare_enable(phy->ref_clk);
- if (ret) {
- dev_err(phy->dev, "%s: ref_clk enable failed %d\n",
- __func__, ret);
- goto out_disable_parent;
- }
-
- phy->is_ref_clk_enabled = true;
- goto out;
-
-out_disable_parent:
- if (phy->ref_clk_parent)
- clk_disable_unprepare(phy->ref_clk_parent);
-out_disable_src:
- clk_disable_unprepare(phy->ref_clk_src);
-out:
- return ret;
-}
-
-static int ufs_qcom_phy_disable_vreg(struct device *dev,
- struct ufs_qcom_phy_vreg *vreg)
-{
- int ret = 0;
-
- if (!vreg || !vreg->enabled)
- goto out;
-
- ret = regulator_disable(vreg->reg);
-
- if (!ret) {
- /* ignore errors on applying disable config */
- ufs_qcom_phy_cfg_vreg(dev, vreg, false);
- vreg->enabled = false;
- } else {
- dev_err(dev, "%s: %s disable failed, err=%d\n",
- __func__, vreg->name, ret);
- }
-out:
- return ret;
-}
-
-static void ufs_qcom_phy_disable_ref_clk(struct ufs_qcom_phy *phy)
-{
- if (phy->is_ref_clk_enabled) {
- clk_disable_unprepare(phy->ref_clk);
- /*
- * "ref_clk_parent" is optional clock hence make sure that clk
- * reference is available before trying to disable the clock.
- */
- if (phy->ref_clk_parent)
- clk_disable_unprepare(phy->ref_clk_parent);
- clk_disable_unprepare(phy->ref_clk_src);
- phy->is_ref_clk_enabled = false;
- }
-}
-
-/* Turn ON M-PHY RMMI interface clocks */
-static int ufs_qcom_phy_enable_iface_clk(struct ufs_qcom_phy *phy)
-{
- int ret = 0;
-
- if (phy->is_iface_clk_enabled)
- goto out;
-
- ret = clk_prepare_enable(phy->tx_iface_clk);
- if (ret) {
- dev_err(phy->dev, "%s: tx_iface_clk enable failed %d\n",
- __func__, ret);
- goto out;
- }
- ret = clk_prepare_enable(phy->rx_iface_clk);
- if (ret) {
- clk_disable_unprepare(phy->tx_iface_clk);
- dev_err(phy->dev, "%s: rx_iface_clk enable failed %d. disabling also tx_iface_clk\n",
- __func__, ret);
- goto out;
- }
- phy->is_iface_clk_enabled = true;
-
-out:
- return ret;
-}
-
-/* Turn OFF M-PHY RMMI interface clocks */
-static void ufs_qcom_phy_disable_iface_clk(struct ufs_qcom_phy *phy)
-{
- if (phy->is_iface_clk_enabled) {
- clk_disable_unprepare(phy->tx_iface_clk);
- clk_disable_unprepare(phy->rx_iface_clk);
- phy->is_iface_clk_enabled = false;
- }
-}
-
-static int ufs_qcom_phy_start_serdes(struct ufs_qcom_phy *ufs_qcom_phy)
-{
- int ret = 0;
-
- if (!ufs_qcom_phy->phy_spec_ops->start_serdes) {
- dev_err(ufs_qcom_phy->dev, "%s: start_serdes() callback is not supported\n",
- __func__);
- ret = -ENOTSUPP;
- } else {
- ufs_qcom_phy->phy_spec_ops->start_serdes(ufs_qcom_phy);
- }
-
- return ret;
-}
-
-int ufs_qcom_phy_set_tx_lane_enable(struct phy *generic_phy, u32 tx_lanes)
-{
- struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy);
- int ret = 0;
-
- if (!ufs_qcom_phy->phy_spec_ops->set_tx_lane_enable) {
- dev_err(ufs_qcom_phy->dev, "%s: set_tx_lane_enable() callback is not supported\n",
- __func__);
- ret = -ENOTSUPP;
- } else {
- ufs_qcom_phy->phy_spec_ops->set_tx_lane_enable(ufs_qcom_phy,
- tx_lanes);
- }
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(ufs_qcom_phy_set_tx_lane_enable);
-
-void ufs_qcom_phy_save_controller_version(struct phy *generic_phy,
- u8 major, u16 minor, u16 step)
-{
- struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy);
-
- ufs_qcom_phy->host_ctrl_rev_major = major;
- ufs_qcom_phy->host_ctrl_rev_minor = minor;
- ufs_qcom_phy->host_ctrl_rev_step = step;
-}
-EXPORT_SYMBOL_GPL(ufs_qcom_phy_save_controller_version);
-
-static int ufs_qcom_phy_is_pcs_ready(struct ufs_qcom_phy *ufs_qcom_phy)
-{
- if (!ufs_qcom_phy->phy_spec_ops->is_physical_coding_sublayer_ready) {
- dev_err(ufs_qcom_phy->dev, "%s: is_physical_coding_sublayer_ready() callback is not supported\n",
- __func__);
- return -ENOTSUPP;
- }
-
- return ufs_qcom_phy->phy_spec_ops->
- is_physical_coding_sublayer_ready(ufs_qcom_phy);
-}
-
-int ufs_qcom_phy_power_on(struct phy *generic_phy)
-{
- struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy);
- struct device *dev = phy_common->dev;
- bool is_rate_B = false;
- int err;
-
- err = ufs_qcom_phy_get_reset(phy_common);
- if (err)
- return err;
-
- err = reset_control_assert(phy_common->ufs_reset);
- if (err)
- return err;
-
- if (phy_common->mode == PHY_MODE_UFS_HS_B)
- is_rate_B = true;
-
- err = phy_common->phy_spec_ops->calibrate(phy_common, is_rate_B);
- if (err)
- return err;
-
- err = reset_control_deassert(phy_common->ufs_reset);
- if (err) {
- dev_err(dev, "Failed to assert UFS PHY reset");
- return err;
- }
-
- err = ufs_qcom_phy_start_serdes(phy_common);
- if (err)
- return err;
-
- err = ufs_qcom_phy_is_pcs_ready(phy_common);
- if (err)
- return err;
-
- err = ufs_qcom_phy_enable_vreg(dev, &phy_common->vdda_phy);
- if (err) {
- dev_err(dev, "%s enable vdda_phy failed, err=%d\n",
- __func__, err);
- goto out;
- }
-
- phy_common->phy_spec_ops->power_control(phy_common, true);
-
- /* vdda_pll also enables ref clock LDOs so enable it first */
- err = ufs_qcom_phy_enable_vreg(dev, &phy_common->vdda_pll);
- if (err) {
- dev_err(dev, "%s enable vdda_pll failed, err=%d\n",
- __func__, err);
- goto out_disable_phy;
- }
-
- err = ufs_qcom_phy_enable_iface_clk(phy_common);
- if (err) {
- dev_err(dev, "%s enable phy iface clock failed, err=%d\n",
- __func__, err);
- goto out_disable_pll;
- }
-
- err = ufs_qcom_phy_enable_ref_clk(phy_common);
- if (err) {
- dev_err(dev, "%s enable phy ref clock failed, err=%d\n",
- __func__, err);
- goto out_disable_iface_clk;
- }
-
- /* enable device PHY ref_clk pad rail */
- if (phy_common->vddp_ref_clk.reg) {
- err = ufs_qcom_phy_enable_vreg(dev,
- &phy_common->vddp_ref_clk);
- if (err) {
- dev_err(dev, "%s enable vddp_ref_clk failed, err=%d\n",
- __func__, err);
- goto out_disable_ref_clk;
- }
- }
-
- goto out;
-
-out_disable_ref_clk:
- ufs_qcom_phy_disable_ref_clk(phy_common);
-out_disable_iface_clk:
- ufs_qcom_phy_disable_iface_clk(phy_common);
-out_disable_pll:
- ufs_qcom_phy_disable_vreg(dev, &phy_common->vdda_pll);
-out_disable_phy:
- ufs_qcom_phy_disable_vreg(dev, &phy_common->vdda_phy);
-out:
- return err;
-}
-EXPORT_SYMBOL_GPL(ufs_qcom_phy_power_on);
-
-int ufs_qcom_phy_power_off(struct phy *generic_phy)
-{
- struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy);
-
- phy_common->phy_spec_ops->power_control(phy_common, false);
-
- if (phy_common->vddp_ref_clk.reg)
- ufs_qcom_phy_disable_vreg(phy_common->dev,
- &phy_common->vddp_ref_clk);
- ufs_qcom_phy_disable_ref_clk(phy_common);
- ufs_qcom_phy_disable_iface_clk(phy_common);
-
- ufs_qcom_phy_disable_vreg(phy_common->dev, &phy_common->vdda_pll);
- ufs_qcom_phy_disable_vreg(phy_common->dev, &phy_common->vdda_phy);
- reset_control_assert(phy_common->ufs_reset);
- return 0;
-}
-EXPORT_SYMBOL_GPL(ufs_qcom_phy_power_off);
-
-MODULE_AUTHOR("Yaniv Gardi <ygardi@codeaurora.org>");
-MODULE_AUTHOR("Vivek Gautam <vivek.gautam@codeaurora.org>");
-MODULE_DESCRIPTION("Universal Flash Storage (UFS) QCOM PHY");
-MODULE_LICENSE("GPL v2");