summaryrefslogtreecommitdiff
path: root/drivers/phy
diff options
context:
space:
mode:
authorRashmi A <rashmi.a@intel.com>2021-10-27 14:55:16 +0300
committerVinod Koul <vkoul@kernel.org>2021-11-23 10:41:52 +0300
commit97004c1a4c52b4357169290158a130ca0b7caae1 (patch)
tree5bd63a6e17d71295cc29ef84644f390c2a1137ab /drivers/phy
parentefb6935dd786a9d213ee542ed77d47ece700357c (diff)
downloadlinux-97004c1a4c52b4357169290158a130ca0b7caae1.tar.xz
phy: intel: Add Thunder Bay eMMC PHY support
Add support of eMMC PHY for Intel Thunder Bay SoC, uses the Arasan eMMC phy Signed-off-by: Rashmi A <rashmi.a@intel.com> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20211027115516.4475-5-rashmi.a@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
Diffstat (limited to 'drivers/phy')
-rw-r--r--drivers/phy/intel/Kconfig10
-rw-r--r--drivers/phy/intel/Makefile1
-rw-r--r--drivers/phy/intel/phy-intel-thunderbay-emmc.c511
3 files changed, 522 insertions, 0 deletions
diff --git a/drivers/phy/intel/Kconfig b/drivers/phy/intel/Kconfig
index ac42bb2fb394..18a3cc5b98c0 100644
--- a/drivers/phy/intel/Kconfig
+++ b/drivers/phy/intel/Kconfig
@@ -46,3 +46,13 @@ config PHY_INTEL_LGM_EMMC
select GENERIC_PHY
help
Enable this to support the Intel EMMC PHY
+
+config PHY_INTEL_THUNDERBAY_EMMC
+ tristate "Intel Thunder Bay eMMC PHY driver"
+ depends on OF && (ARCH_THUNDERBAY || COMPILE_TEST)
+ select GENERIC_PHY
+ help
+ This option enables support for Intel Thunder Bay SoC eMMC PHY.
+
+ To compile this driver as a module, choose M here: the module
+ will be called phy-intel-thunderbay-emmc.ko.
diff --git a/drivers/phy/intel/Makefile b/drivers/phy/intel/Makefile
index 14550981a707..b7321d56b0bb 100644
--- a/drivers/phy/intel/Makefile
+++ b/drivers/phy/intel/Makefile
@@ -3,3 +3,4 @@ obj-$(CONFIG_PHY_INTEL_KEEMBAY_EMMC) += phy-intel-keembay-emmc.o
obj-$(CONFIG_PHY_INTEL_KEEMBAY_USB) += phy-intel-keembay-usb.o
obj-$(CONFIG_PHY_INTEL_LGM_COMBO) += phy-intel-lgm-combo.o
obj-$(CONFIG_PHY_INTEL_LGM_EMMC) += phy-intel-lgm-emmc.o
+obj-$(CONFIG_PHY_INTEL_THUNDERBAY_EMMC) += phy-intel-thunderbay-emmc.o
diff --git a/drivers/phy/intel/phy-intel-thunderbay-emmc.c b/drivers/phy/intel/phy-intel-thunderbay-emmc.c
new file mode 100644
index 000000000000..2d6ea84492f2
--- /dev/null
+++ b/drivers/phy/intel/phy-intel-thunderbay-emmc.c
@@ -0,0 +1,511 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Intel ThunderBay eMMC PHY driver
+ *
+ * Copyright (C) 2021 Intel Corporation
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+
+/* eMMC/SD/SDIO core/phy configuration registers */
+#define CTRL_CFG_0 0x00
+#define CTRL_CFG_1 0x04
+#define CTRL_PRESET_0 0x08
+#define CTRL_PRESET_1 0x0c
+#define CTRL_PRESET_2 0x10
+#define CTRL_PRESET_3 0x14
+#define CTRL_PRESET_4 0x18
+#define CTRL_CFG_2 0x1c
+#define CTRL_CFG_3 0x20
+#define PHY_CFG_0 0x24
+#define PHY_CFG_1 0x28
+#define PHY_CFG_2 0x2c
+#define PHYBIST_CTRL 0x30
+#define SDHC_STAT3 0x34
+#define PHY_STAT 0x38
+#define PHYBIST_STAT_0 0x3c
+#define PHYBIST_STAT_1 0x40
+#define EMMC_AXI 0x44
+
+/* CTRL_PRESET_3 */
+#define CTRL_PRESET3_MASK GENMASK(31, 0)
+#define CTRL_PRESET3_SHIFT 0
+
+/* CTRL_CFG_0 bit fields */
+#define SUPPORT_HS_MASK BIT(26)
+#define SUPPORT_HS_SHIFT 26
+
+#define SUPPORT_8B_MASK BIT(24)
+#define SUPPORT_8B_SHIFT 24
+
+/* CTRL_CFG_1 bit fields */
+#define SUPPORT_SDR50_MASK BIT(28)
+#define SUPPORT_SDR50_SHIFT 28
+#define SLOT_TYPE_MASK GENMASK(27, 26)
+#define SLOT_TYPE_OFFSET 26
+#define SUPPORT_64B_MASK BIT(24)
+#define SUPPORT_64B_SHIFT 24
+#define SUPPORT_HS400_MASK BIT(2)
+#define SUPPORT_HS400_SHIFT 2
+#define SUPPORT_DDR50_MASK BIT(1)
+#define SUPPORT_DDR50_SHIFT 1
+#define SUPPORT_SDR104_MASK BIT(0)
+#define SUPPORT_SDR104_SHIFT 0
+
+/* PHY_CFG_0 bit fields */
+#define SEL_DLY_TXCLK_MASK BIT(29)
+#define SEL_DLY_TXCLK_SHIFT 29
+#define SEL_DLY_RXCLK_MASK BIT(28)
+#define SEL_DLY_RXCLK_SHIFT 28
+
+#define OTAP_DLY_ENA_MASK BIT(27)
+#define OTAP_DLY_ENA_SHIFT 27
+#define OTAP_DLY_SEL_MASK GENMASK(26, 23)
+#define OTAP_DLY_SEL_SHIFT 23
+#define ITAP_CHG_WIN_MASK BIT(22)
+#define ITAP_CHG_WIN_SHIFT 22
+#define ITAP_DLY_ENA_MASK BIT(21)
+#define ITAP_DLY_ENA_SHIFT 21
+#define ITAP_DLY_SEL_MASK GENMASK(20, 16)
+#define ITAP_DLY_SEL_SHIFT 16
+#define RET_ENB_MASK BIT(15)
+#define RET_ENB_SHIFT 15
+#define RET_EN_MASK BIT(14)
+#define RET_EN_SHIFT 14
+#define DLL_IFF_MASK GENMASK(13, 11)
+#define DLL_IFF_SHIFT 11
+#define DLL_EN_MASK BIT(10)
+#define DLL_EN_SHIFT 10
+#define DLL_TRIM_ICP_MASK GENMASK(9, 6)
+#define DLL_TRIM_ICP_SHIFT 6
+#define RETRIM_EN_MASK BIT(5)
+#define RETRIM_EN_SHIFT 5
+#define RETRIM_MASK BIT(4)
+#define RETRIM_SHIFT 4
+#define DR_TY_MASK GENMASK(3, 1)
+#define DR_TY_SHIFT 1
+#define PWR_DOWN_MASK BIT(0)
+#define PWR_DOWN_SHIFT 0
+
+/* PHY_CFG_1 bit fields */
+#define REN_DAT_MASK GENMASK(19, 12)
+#define REN_DAT_SHIFT 12
+#define REN_CMD_MASK BIT(11)
+#define REN_CMD_SHIFT 11
+#define REN_STRB_MASK BIT(10)
+#define REN_STRB_SHIFT 10
+#define PU_STRB_MASK BIT(20)
+#define PU_STRB_SHIFT 20
+
+/* PHY_CFG_2 bit fields */
+#define CLKBUF_MASK GENMASK(24, 21)
+#define CLKBUF_SHIFT 21
+#define SEL_STRB_MASK GENMASK(20, 13)
+#define SEL_STRB_SHIFT 13
+#define SEL_FREQ_MASK GENMASK(12, 10)
+#define SEL_FREQ_SHIFT 10
+
+/* PHY_STAT bit fields */
+#define CAL_DONE BIT(6)
+#define DLL_RDY BIT(5)
+
+#define OTAP_DLY 0x0
+#define ITAP_DLY 0x0
+#define STRB 0x33
+
+/* From ACS_eMMC51_16nFFC_RO1100_Userguide_v1p0.pdf p17 */
+#define FREQSEL_200M_170M 0x0
+#define FREQSEL_170M_140M 0x1
+#define FREQSEL_140M_110M 0x2
+#define FREQSEL_110M_80M 0x3
+#define FREQSEL_80M_50M 0x4
+#define FREQSEL_275M_250M 0x5
+#define FREQSEL_250M_225M 0x6
+#define FREQSEL_225M_200M 0x7
+
+/* Phy power status */
+#define PHY_UNINITIALIZED 0
+#define PHY_INITIALIZED 1
+
+/*
+ * During init(400KHz) phy_settings will be called with 200MHZ clock
+ * To avoid incorrectly setting the phy for init(400KHZ) "phy_power_sts" is used.
+ * When actual clock is set always phy is powered off once and then powered on.
+ * (sdhci_arasan_set_clock). That feature will be used to identify whether the
+ * settings are for init phy_power_on or actual clock phy_power_on
+ * 0 --> init settings
+ * 1 --> actual settings
+ */
+
+struct thunderbay_emmc_phy {
+ void __iomem *reg_base;
+ struct clk *emmcclk;
+ int phy_power_sts;
+};
+
+static inline void update_reg(struct thunderbay_emmc_phy *tbh_phy, u32 offset,
+ u32 mask, u32 shift, u32 val)
+{
+ u32 tmp;
+
+ tmp = readl(tbh_phy->reg_base + offset);
+ tmp &= ~mask;
+ tmp |= val << shift;
+ writel(tmp, tbh_phy->reg_base + offset);
+}
+
+static int thunderbay_emmc_phy_power(struct phy *phy, bool power_on)
+{
+ struct thunderbay_emmc_phy *tbh_phy = phy_get_drvdata(phy);
+ unsigned int freqsel = FREQSEL_200M_170M;
+ unsigned long rate;
+ static int lock;
+ u32 val;
+ int ret;
+
+ /* Disable DLL */
+ rate = clk_get_rate(tbh_phy->emmcclk);
+ switch (rate) {
+ case 200000000:
+ /* lock dll only when it is used, i.e only if SEL_DLY_TXCLK/RXCLK are 0 */
+ update_reg(tbh_phy, PHY_CFG_0, DLL_EN_MASK, DLL_EN_SHIFT, 0x0);
+ break;
+
+ /* dll lock not required for other frequencies */
+ case 50000000 ... 52000000:
+ case 400000:
+ default:
+ break;
+ }
+
+ if (!power_on)
+ return 0;
+
+ rate = clk_get_rate(tbh_phy->emmcclk);
+ switch (rate) {
+ case 170000001 ... 200000000:
+ freqsel = FREQSEL_200M_170M;
+ break;
+
+ case 140000001 ... 170000000:
+ freqsel = FREQSEL_170M_140M;
+ break;
+
+ case 110000001 ... 140000000:
+ freqsel = FREQSEL_140M_110M;
+ break;
+
+ case 80000001 ... 110000000:
+ freqsel = FREQSEL_110M_80M;
+ break;
+
+ case 50000000 ... 80000000:
+ freqsel = FREQSEL_80M_50M;
+ break;
+
+ case 250000001 ... 275000000:
+ freqsel = FREQSEL_275M_250M;
+ break;
+
+ case 225000001 ... 250000000:
+ freqsel = FREQSEL_250M_225M;
+ break;
+
+ case 200000001 ... 225000000:
+ freqsel = FREQSEL_225M_200M;
+ break;
+ default:
+ break;
+ }
+ /* Clock rate is checked against upper limit. It may fall low during init */
+ if (rate > 200000000)
+ dev_warn(&phy->dev, "Unsupported rate: %lu\n", rate);
+
+ udelay(5);
+
+ if (lock == 0) {
+ /* PDB will be done only once per boot */
+ update_reg(tbh_phy, PHY_CFG_0, PWR_DOWN_MASK,
+ PWR_DOWN_SHIFT, 0x1);
+ lock = 1;
+ /*
+ * According to the user manual, it asks driver to wait 5us for
+ * calpad busy trimming. However it is documented that this value is
+ * PVT(A.K.A. process, voltage and temperature) relevant, so some
+ * failure cases are found which indicates we should be more tolerant
+ * to calpad busy trimming.
+ */
+ ret = readl_poll_timeout(tbh_phy->reg_base + PHY_STAT,
+ val, (val & CAL_DONE), 10, 50);
+ if (ret) {
+ dev_err(&phy->dev, "caldone failed, ret=%d\n", ret);
+ return ret;
+ }
+ }
+ rate = clk_get_rate(tbh_phy->emmcclk);
+ switch (rate) {
+ case 200000000:
+ /* Set frequency of the DLL operation */
+ update_reg(tbh_phy, PHY_CFG_2, SEL_FREQ_MASK, SEL_FREQ_SHIFT, freqsel);
+
+ /* Enable DLL */
+ update_reg(tbh_phy, PHY_CFG_0, DLL_EN_MASK, DLL_EN_SHIFT, 0x1);
+
+ /*
+ * After enabling analog DLL circuits docs say that we need 10.2 us if
+ * our source clock is at 50 MHz and that lock time scales linearly
+ * with clock speed. If we are powering on the PHY and the card clock
+ * is super slow (like 100kHz) this could take as long as 5.1 ms as
+ * per the math: 10.2 us * (50000000 Hz / 100000 Hz) => 5.1 ms
+ * hopefully we won't be running at 100 kHz, but we should still make
+ * sure we wait long enough.
+ *
+ * NOTE: There appear to be corner cases where the DLL seems to take
+ * extra long to lock for reasons that aren't understood. In some
+ * extreme cases we've seen it take up to over 10ms (!). We'll be
+ * generous and give it 50ms.
+ */
+ ret = readl_poll_timeout(tbh_phy->reg_base + PHY_STAT,
+ val, (val & DLL_RDY), 10, 50 * USEC_PER_MSEC);
+ if (ret) {
+ dev_err(&phy->dev, "dllrdy failed, ret=%d\n", ret);
+ return ret;
+ }
+ break;
+
+ default:
+ break;
+ }
+ return 0;
+}
+
+static int thunderbay_emmc_phy_init(struct phy *phy)
+{
+ struct thunderbay_emmc_phy *tbh_phy = phy_get_drvdata(phy);
+
+ tbh_phy->emmcclk = clk_get(&phy->dev, "emmcclk");
+
+ return PTR_ERR_OR_ZERO(tbh_phy->emmcclk);
+}
+
+static int thunderbay_emmc_phy_exit(struct phy *phy)
+{
+ struct thunderbay_emmc_phy *tbh_phy = phy_get_drvdata(phy);
+
+ clk_put(tbh_phy->emmcclk);
+
+ return 0;
+}
+
+static int thunderbay_emmc_phy_power_on(struct phy *phy)
+{
+ struct thunderbay_emmc_phy *tbh_phy = phy_get_drvdata(phy);
+ unsigned long rate;
+
+ /* Overwrite capability bits configurable in bootloader */
+ update_reg(tbh_phy, CTRL_CFG_0,
+ SUPPORT_HS_MASK, SUPPORT_HS_SHIFT, 0x1);
+ update_reg(tbh_phy, CTRL_CFG_0,
+ SUPPORT_8B_MASK, SUPPORT_8B_SHIFT, 0x1);
+ update_reg(tbh_phy, CTRL_CFG_1,
+ SUPPORT_SDR50_MASK, SUPPORT_SDR50_SHIFT, 0x1);
+ update_reg(tbh_phy, CTRL_CFG_1,
+ SUPPORT_DDR50_MASK, SUPPORT_DDR50_SHIFT, 0x1);
+ update_reg(tbh_phy, CTRL_CFG_1,
+ SUPPORT_SDR104_MASK, SUPPORT_SDR104_SHIFT, 0x1);
+ update_reg(tbh_phy, CTRL_CFG_1,
+ SUPPORT_HS400_MASK, SUPPORT_HS400_SHIFT, 0x1);
+ update_reg(tbh_phy, CTRL_CFG_1,
+ SUPPORT_64B_MASK, SUPPORT_64B_SHIFT, 0x1);
+
+ if (tbh_phy->phy_power_sts == PHY_UNINITIALIZED) {
+ /* Indicates initialization, settings for init, same as 400KHZ setting */
+ update_reg(tbh_phy, PHY_CFG_0, SEL_DLY_TXCLK_MASK, SEL_DLY_TXCLK_SHIFT, 0x1);
+ update_reg(tbh_phy, PHY_CFG_0, SEL_DLY_RXCLK_MASK, SEL_DLY_RXCLK_SHIFT, 0x1);
+ update_reg(tbh_phy, PHY_CFG_0, ITAP_DLY_ENA_MASK, ITAP_DLY_ENA_SHIFT, 0x0);
+ update_reg(tbh_phy, PHY_CFG_0, ITAP_DLY_SEL_MASK, ITAP_DLY_SEL_SHIFT, 0x0);
+ update_reg(tbh_phy, PHY_CFG_0, OTAP_DLY_ENA_MASK, OTAP_DLY_ENA_SHIFT, 0x0);
+ update_reg(tbh_phy, PHY_CFG_0, OTAP_DLY_SEL_MASK, OTAP_DLY_SEL_SHIFT, 0);
+ update_reg(tbh_phy, PHY_CFG_0, DLL_TRIM_ICP_MASK, DLL_TRIM_ICP_SHIFT, 0);
+ update_reg(tbh_phy, PHY_CFG_0, DR_TY_MASK, DR_TY_SHIFT, 0x1);
+
+ } else if (tbh_phy->phy_power_sts == PHY_INITIALIZED) {
+ /* Indicates actual clock setting */
+ rate = clk_get_rate(tbh_phy->emmcclk);
+ switch (rate) {
+ case 200000000:
+ update_reg(tbh_phy, PHY_CFG_0, SEL_DLY_TXCLK_MASK,
+ SEL_DLY_TXCLK_SHIFT, 0x0);
+ update_reg(tbh_phy, PHY_CFG_0, SEL_DLY_RXCLK_MASK,
+ SEL_DLY_RXCLK_SHIFT, 0x0);
+ update_reg(tbh_phy, PHY_CFG_0, ITAP_DLY_ENA_MASK,
+ ITAP_DLY_ENA_SHIFT, 0x0);
+ update_reg(tbh_phy, PHY_CFG_0, ITAP_DLY_SEL_MASK,
+ ITAP_DLY_SEL_SHIFT, 0x0);
+ update_reg(tbh_phy, PHY_CFG_0, OTAP_DLY_ENA_MASK,
+ OTAP_DLY_ENA_SHIFT, 0x1);
+ update_reg(tbh_phy, PHY_CFG_0, OTAP_DLY_SEL_MASK,
+ OTAP_DLY_SEL_SHIFT, 2);
+ update_reg(tbh_phy, PHY_CFG_0, DLL_TRIM_ICP_MASK,
+ DLL_TRIM_ICP_SHIFT, 0x8);
+ update_reg(tbh_phy, PHY_CFG_0, DR_TY_MASK,
+ DR_TY_SHIFT, 0x1);
+ /* For HS400 only */
+ update_reg(tbh_phy, PHY_CFG_2, SEL_STRB_MASK,
+ SEL_STRB_SHIFT, STRB);
+ break;
+
+ case 50000000 ... 52000000:
+ /* For both HS and DDR52 this setting works */
+ update_reg(tbh_phy, PHY_CFG_0, SEL_DLY_TXCLK_MASK,
+ SEL_DLY_TXCLK_SHIFT, 0x1);
+ update_reg(tbh_phy, PHY_CFG_0, SEL_DLY_RXCLK_MASK,
+ SEL_DLY_RXCLK_SHIFT, 0x1);
+ update_reg(tbh_phy, PHY_CFG_0, ITAP_DLY_ENA_MASK,
+ ITAP_DLY_ENA_SHIFT, 0x0);
+ update_reg(tbh_phy, PHY_CFG_0, ITAP_DLY_SEL_MASK,
+ ITAP_DLY_SEL_SHIFT, 0x0);
+ update_reg(tbh_phy, PHY_CFG_0, OTAP_DLY_ENA_MASK,
+ OTAP_DLY_ENA_SHIFT, 0x1);
+ update_reg(tbh_phy, PHY_CFG_0, OTAP_DLY_SEL_MASK,
+ OTAP_DLY_SEL_SHIFT, 4);
+ update_reg(tbh_phy, PHY_CFG_0, DLL_TRIM_ICP_MASK,
+ DLL_TRIM_ICP_SHIFT, 0x8);
+ update_reg(tbh_phy, PHY_CFG_0,
+ DR_TY_MASK, DR_TY_SHIFT, 0x1);
+ break;
+
+ case 400000:
+ update_reg(tbh_phy, PHY_CFG_0, SEL_DLY_TXCLK_MASK,
+ SEL_DLY_TXCLK_SHIFT, 0x1);
+ update_reg(tbh_phy, PHY_CFG_0, SEL_DLY_RXCLK_MASK,
+ SEL_DLY_RXCLK_SHIFT, 0x1);
+ update_reg(tbh_phy, PHY_CFG_0, ITAP_DLY_ENA_MASK,
+ ITAP_DLY_ENA_SHIFT, 0x0);
+ update_reg(tbh_phy, PHY_CFG_0, ITAP_DLY_SEL_MASK,
+ ITAP_DLY_SEL_SHIFT, 0x0);
+ update_reg(tbh_phy, PHY_CFG_0, OTAP_DLY_ENA_MASK,
+ OTAP_DLY_ENA_SHIFT, 0x0);
+ update_reg(tbh_phy, PHY_CFG_0, OTAP_DLY_SEL_MASK,
+ OTAP_DLY_SEL_SHIFT, 0);
+ update_reg(tbh_phy, PHY_CFG_0, DLL_TRIM_ICP_MASK,
+ DLL_TRIM_ICP_SHIFT, 0);
+ update_reg(tbh_phy, PHY_CFG_0, DR_TY_MASK, DR_TY_SHIFT, 0x1);
+ break;
+
+ default:
+ update_reg(tbh_phy, PHY_CFG_0, SEL_DLY_TXCLK_MASK,
+ SEL_DLY_TXCLK_SHIFT, 0x1);
+ update_reg(tbh_phy, PHY_CFG_0, SEL_DLY_RXCLK_MASK,
+ SEL_DLY_RXCLK_SHIFT, 0x1);
+ update_reg(tbh_phy, PHY_CFG_0, ITAP_DLY_ENA_MASK,
+ ITAP_DLY_ENA_SHIFT, 0x0);
+ update_reg(tbh_phy, PHY_CFG_0, ITAP_DLY_SEL_MASK,
+ ITAP_DLY_SEL_SHIFT, 0x0);
+ update_reg(tbh_phy, PHY_CFG_0, OTAP_DLY_ENA_MASK,
+ OTAP_DLY_ENA_SHIFT, 0x1);
+ update_reg(tbh_phy, PHY_CFG_0, OTAP_DLY_SEL_MASK,
+ OTAP_DLY_SEL_SHIFT, 2);
+ update_reg(tbh_phy, PHY_CFG_0, DLL_TRIM_ICP_MASK,
+ DLL_TRIM_ICP_SHIFT, 0x8);
+ update_reg(tbh_phy, PHY_CFG_0, DR_TY_MASK,
+ DR_TY_SHIFT, 0x1);
+ break;
+ }
+ /* Reset, init seq called without phy_power_off, this indicates init seq */
+ tbh_phy->phy_power_sts = PHY_UNINITIALIZED;
+ }
+
+ update_reg(tbh_phy, PHY_CFG_0, RETRIM_EN_MASK, RETRIM_EN_SHIFT, 0x1);
+ update_reg(tbh_phy, PHY_CFG_0, RETRIM_MASK, RETRIM_SHIFT, 0x0);
+
+ return thunderbay_emmc_phy_power(phy, 1);
+}
+
+static int thunderbay_emmc_phy_power_off(struct phy *phy)
+{
+ struct thunderbay_emmc_phy *tbh_phy = phy_get_drvdata(phy);
+
+ tbh_phy->phy_power_sts = PHY_INITIALIZED;
+
+ return thunderbay_emmc_phy_power(phy, 0);
+}
+
+static const struct phy_ops thunderbay_emmc_phy_ops = {
+ .init = thunderbay_emmc_phy_init,
+ .exit = thunderbay_emmc_phy_exit,
+ .power_on = thunderbay_emmc_phy_power_on,
+ .power_off = thunderbay_emmc_phy_power_off,
+ .owner = THIS_MODULE,
+};
+
+static const struct of_device_id thunderbay_emmc_phy_of_match[] = {
+ { .compatible = "intel,thunderbay-emmc-phy",
+ (void *)&thunderbay_emmc_phy_ops },
+ {}
+};
+MODULE_DEVICE_TABLE(of, thunderbay_emmc_phy_of_match);
+
+static int thunderbay_emmc_phy_probe(struct platform_device *pdev)
+{
+ struct thunderbay_emmc_phy *tbh_phy;
+ struct phy_provider *phy_provider;
+ struct device *dev = &pdev->dev;
+ const struct of_device_id *id;
+ struct phy *generic_phy;
+ struct resource *res;
+
+ if (!dev->of_node)
+ return -ENODEV;
+
+ tbh_phy = devm_kzalloc(dev, sizeof(*tbh_phy), GFP_KERNEL);
+ if (!tbh_phy)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ tbh_phy->reg_base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(tbh_phy->reg_base)) {
+ dev_err(&pdev->dev, "region map failed\n");
+ return PTR_ERR(tbh_phy->reg_base);
+ }
+
+ tbh_phy->phy_power_sts = PHY_UNINITIALIZED;
+ id = of_match_node(thunderbay_emmc_phy_of_match, pdev->dev.of_node);
+ if (!id) {
+ dev_err(dev, "failed to get match_node\n");
+ return -EINVAL;
+ }
+
+ generic_phy = devm_phy_create(dev, dev->of_node, id->data);
+ if (IS_ERR(generic_phy)) {
+ dev_err(dev, "failed to create PHY\n");
+ return PTR_ERR(generic_phy);
+ }
+
+ phy_set_drvdata(generic_phy, tbh_phy);
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static struct platform_driver thunderbay_emmc_phy_driver = {
+ .probe = thunderbay_emmc_phy_probe,
+ .driver = {
+ .name = "thunderbay-emmc-phy",
+ .of_match_table = thunderbay_emmc_phy_of_match,
+ },
+};
+module_platform_driver(thunderbay_emmc_phy_driver);
+
+MODULE_AUTHOR("Nandhini S <nandhini.srikandan@intel.com>");
+MODULE_AUTHOR("Rashmi A <rashmi.a@intel.com>");
+MODULE_DESCRIPTION("Intel Thunder Bay eMMC PHY driver");
+MODULE_LICENSE("GPL v2");