platform/x86: intel_atomisp2: Move to intel sub-directory

Move Intel AtomISP v2 drivers to intel sub-directory
to improve readability.

Signed-off-by: Kate Hsuan <hpa@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210820110458.73018-15-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

4 files changed, 311 insertions, 0 deletions

diff --git a/drivers/platform/x86/intel/atomisp2/Kconfig b/drivers/platform/x86/intel/atomisp2/Kconfig
new file mode 100644
index 000000000000..35dd2be9d2a1
--- /dev/null
+++ b/drivers/platform/x86/intel/atomisp2/Kconfig
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Intel x86 Platform Specific Drivers
+#
+
+config INTEL_ATOMISP2_PDX86
+	bool
+
+config INTEL_ATOMISP2_LED
+	tristate "Intel AtomISP v2 camera LED driver"
+	depends on GPIOLIB && LEDS_GPIO
+	select INTEL_ATOMISP2_PDX86
+	help
+	  Many Bay Trail and Cherry Trail devices come with a camera attached
+	  to Intel's Image Signal Processor. Linux currently does not have a
+	  driver for these, so they do not work as a camera. Some of these
+	  camera's have a LED which is controlled through a GPIO.
+
+	  Some of these devices have a firmware issue where the LED gets turned
+	  on at boot. This driver will turn the LED off at boot and also allows
+	  controlling the LED (repurposing it) through the sysfs LED interface.
+
+	  Which GPIO is attached to the LED is usually not described in the
+	  ACPI tables, so this driver contains per-system info about the GPIO
+	  inside the driver, this means that this driver only works on systems
+	  the driver knows about.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called intel_atomisp2_led.
+
+config INTEL_ATOMISP2_PM
+	tristate "Intel AtomISP v2 dummy / power-management driver"
+	depends on PCI && IOSF_MBI && PM
+	depends on !INTEL_ATOMISP
+	select INTEL_ATOMISP2_PDX86
+	help
+	  Power-management driver for Intel's Image Signal Processor found on
+	  Bay Trail and Cherry Trail devices. This dummy driver's sole purpose
+	  is to turn the ISP off (put it in D3) to save power and to allow
+	  entering of S0ix modes.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called intel_atomisp2_pm.
diff --git a/drivers/platform/x86/intel/atomisp2/Makefile b/drivers/platform/x86/intel/atomisp2/Makefile
new file mode 100644
index 000000000000..96b1e877d1f1
--- /dev/null
+++ b/drivers/platform/x86/intel/atomisp2/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Intel x86 Platform Specific Drivers
+#
+
+intel_atomisp2_led-y			:= led.o
+obj-$(CONFIG_INTEL_ATOMISP2_LED)	+= intel_atomisp2_led.o
+intel_atomisp2_pm-y			+= pm.o
+obj-$(CONFIG_INTEL_ATOMISP2_PM)		+= intel_atomisp2_pm.o
diff --git a/drivers/platform/x86/intel/atomisp2/led.c b/drivers/platform/x86/intel/atomisp2/led.c
new file mode 100644
index 000000000000..5935dfca166f
--- /dev/null
+++ b/drivers/platform/x86/intel/atomisp2/led.c
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for controlling LEDs for cameras connected to the Intel atomisp2
+ * The main purpose of this driver is to turn off LEDs which are on at boot.
+ *
+ * Copyright (C) 2020 Hans de Goede <hdegoede@redhat.com>
+ */
+
+#include <linux/dmi.h>
+#include <linux/gpio/consumer.h>
+#include <linux/gpio/machine.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/platform_device.h>
+#include <linux/workqueue.h>
+
+/* This must be leds-gpio as the leds-gpio driver binds to the name */
+#define DEV_NAME		"leds-gpio"
+
+static const struct gpio_led atomisp2_leds[] = {
+	{
+		.name = "atomisp2::camera",
+		.default_state  = LEDS_GPIO_DEFSTATE_OFF,
+	},
+};
+
+static const struct gpio_led_platform_data atomisp2_leds_pdata = {
+	.num_leds	= ARRAY_SIZE(atomisp2_leds),
+	.leds		= atomisp2_leds,
+};
+
+static struct gpiod_lookup_table asus_t100ta_lookup = {
+	.dev_id = DEV_NAME,
+	.table = {
+		GPIO_LOOKUP_IDX("INT33FC:02", 8, NULL, 0, GPIO_ACTIVE_HIGH),
+		{ }
+	}
+};
+
+static struct gpiod_lookup_table asus_t100chi_lookup = {
+	.dev_id = DEV_NAME,
+	.table = {
+		GPIO_LOOKUP_IDX("INT33FC:01", 24, NULL, 0, GPIO_ACTIVE_HIGH),
+		{ }
+	}
+};
+
+static const struct dmi_system_id atomisp2_led_systems[] __initconst = {
+	{
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100TA"),
+		},
+		.driver_data = &asus_t100ta_lookup,
+	},
+	{
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T200TA"),
+		},
+		.driver_data = &asus_t100ta_lookup,
+	},
+	{
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100CHI"),
+		},
+		.driver_data = &asus_t100chi_lookup,
+	},
+	{} /* Terminating entry */
+};
+MODULE_DEVICE_TABLE(dmi, atomisp2_led_systems);
+
+static struct gpiod_lookup_table *gpio_lookup;
+static struct platform_device *pdev;
+
+static int __init atomisp2_led_init(void)
+{
+	const struct dmi_system_id *system;
+
+	system = dmi_first_match(atomisp2_led_systems);
+	if (!system)
+		return -ENODEV;
+
+	gpio_lookup = system->driver_data;
+	gpiod_add_lookup_table(gpio_lookup);
+
+	pdev = platform_device_register_resndata(NULL,
+						 DEV_NAME, PLATFORM_DEVID_NONE,
+						 NULL, 0, &atomisp2_leds_pdata,
+						 sizeof(atomisp2_leds_pdata));
+	if (IS_ERR(pdev))
+		gpiod_remove_lookup_table(gpio_lookup);
+
+	return PTR_ERR_OR_ZERO(pdev);
+}
+
+static void __exit atomisp2_led_cleanup(void)
+{
+	platform_device_unregister(pdev);
+	gpiod_remove_lookup_table(gpio_lookup);
+}
+
+module_init(atomisp2_led_init);
+module_exit(atomisp2_led_cleanup);
+
+/*
+ * The ACPI INIT method from Asus WMI's code on the T100TA and T200TA turns the
+ * LED on (without the WMI interface allowing further control over the LED).
+ * Ensure we are loaded after asus-nb-wmi so that we turn the LED off again.
+ */
+MODULE_SOFTDEP("pre: asus_nb_wmi");
+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com");
+MODULE_DESCRIPTION("Intel atomisp2 camera LED driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/platform/x86/intel/atomisp2/pm.c b/drivers/platform/x86/intel/atomisp2/pm.c
new file mode 100644
index 000000000000..805fc0d8515c
--- /dev/null
+++ b/drivers/platform/x86/intel/atomisp2/pm.c
@@ -0,0 +1,143 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Dummy driver for Intel's Image Signal Processor found on Bay Trail
+ * and Cherry Trail devices. The sole purpose of this driver is to allow
+ * the ISP to be put in D3.
+ *
+ * Copyright (C) 2018 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Based on various non upstream patches for ISP support:
+ * Copyright (C) 2010-2017 Intel Corporation. All rights reserved.
+ * Copyright (c) 2010 Silicon Hive www.siliconhive.com.
+ */
+
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/pci.h>
+#include <linux/pm_runtime.h>
+#include <asm/iosf_mbi.h>
+
+/* PCI configuration regs */
+#define PCI_INTERRUPT_CTRL		0x9c
+
+#define PCI_CSI_CONTROL			0xe8
+#define PCI_CSI_CONTROL_PORTS_OFF_MASK	0x7
+
+/* IOSF BT_MBI_UNIT_PMC regs */
+#define ISPSSPM0			0x39
+#define ISPSSPM0_ISPSSC_OFFSET		0
+#define ISPSSPM0_ISPSSC_MASK		0x00000003
+#define ISPSSPM0_ISPSSS_OFFSET		24
+#define ISPSSPM0_ISPSSS_MASK		0x03000000
+#define ISPSSPM0_IUNIT_POWER_ON		0x0
+#define ISPSSPM0_IUNIT_POWER_OFF	0x3
+
+static int isp_set_power(struct pci_dev *dev, bool enable)
+{
+	unsigned long timeout;
+	u32 val = enable ? ISPSSPM0_IUNIT_POWER_ON : ISPSSPM0_IUNIT_POWER_OFF;
+
+	/* Write to ISPSSPM0 bit[1:0] to power on/off the IUNIT */
+	iosf_mbi_modify(BT_MBI_UNIT_PMC, MBI_REG_READ, ISPSSPM0,
+			val, ISPSSPM0_ISPSSC_MASK);
+
+	/*
+	 * There should be no IUNIT access while power-down is
+	 * in progress. HW sighting: 4567865.
+	 * Wait up to 50 ms for the IUNIT to shut down.
+	 * And we do the same for power on.
+	 */
+	timeout = jiffies + msecs_to_jiffies(50);
+	do {
+		u32 tmp;
+
+		/* Wait until ISPSSPM0 bit[25:24] shows the right value */
+		iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ, ISPSSPM0, &tmp);
+		tmp = (tmp & ISPSSPM0_ISPSSS_MASK) >> ISPSSPM0_ISPSSS_OFFSET;
+		if (tmp == val)
+			return 0;
+
+		usleep_range(1000, 2000);
+	} while (time_before(jiffies, timeout));
+
+	dev_err(&dev->dev, "IUNIT power-%s timeout.\n", enable ? "on" : "off");
+	return -EBUSY;
+}
+
+static int isp_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	pm_runtime_allow(&dev->dev);
+	pm_runtime_put_sync_suspend(&dev->dev);
+
+	return 0;
+}
+
+static void isp_remove(struct pci_dev *dev)
+{
+	pm_runtime_get_sync(&dev->dev);
+	pm_runtime_forbid(&dev->dev);
+}
+
+static int isp_pci_suspend(struct device *dev)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	u32 val;
+
+	pci_write_config_dword(pdev, PCI_INTERRUPT_CTRL, 0);
+
+	/*
+	 * MRFLD IUNIT DPHY is located in an always-power-on island
+	 * MRFLD HW design need all CSI ports are disabled before
+	 * powering down the IUNIT.
+	 */
+	pci_read_config_dword(pdev, PCI_CSI_CONTROL, &val);
+	val |= PCI_CSI_CONTROL_PORTS_OFF_MASK;
+	pci_write_config_dword(pdev, PCI_CSI_CONTROL, val);
+
+	/*
+	 * We lose config space access when punit power gates
+	 * the ISP. Can't use pci_set_power_state() because
+	 * pmcsr won't actually change when we write to it.
+	 */
+	pci_save_state(pdev);
+	pdev->current_state = PCI_D3cold;
+	isp_set_power(pdev, false);
+
+	return 0;
+}
+
+static int isp_pci_resume(struct device *dev)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+
+	isp_set_power(pdev, true);
+	pdev->current_state = PCI_D0;
+	pci_restore_state(pdev);
+
+	return 0;
+}
+
+static UNIVERSAL_DEV_PM_OPS(isp_pm_ops, isp_pci_suspend,
+			    isp_pci_resume, NULL);
+
+static const struct pci_device_id isp_id_table[] = {
+	{ PCI_VDEVICE(INTEL, 0x0f38), },
+	{ PCI_VDEVICE(INTEL, 0x22b8), },
+	{ 0, }
+};
+MODULE_DEVICE_TABLE(pci, isp_id_table);
+
+static struct pci_driver isp_pci_driver = {
+	.name = "intel_atomisp2_pm",
+	.id_table = isp_id_table,
+	.probe = isp_probe,
+	.remove = isp_remove,
+	.driver.pm = &isp_pm_ops,
+};
+
+module_pci_driver(isp_pci_driver);
+
+MODULE_DESCRIPTION("Intel AtomISP2 dummy / power-management drv (for suspend)");
+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
+MODULE_LICENSE("GPL v2");