summaryrefslogtreecommitdiff
path: root/drivers/remoteproc
diff options
context:
space:
mode:
authorSuman Anna <s-anna@ti.com>2015-01-10 00:21:58 +0300
committerOhad Ben-Cohen <ohad@wizery.com>2015-03-12 11:43:26 +0300
commit315491e5d6ee66838a18a8ca0c14e6ffb376e48c (patch)
tree308f7c9d3cef5ff6d0cd2508714fe7406dd9718c /drivers/remoteproc
parentc517d838eb7d07bbe9507871fab3931deccff539 (diff)
downloadlinux-315491e5d6ee66838a18a8ca0c14e6ffb376e48c.tar.xz
remoteproc: add IOMMU hardware capability flag
The remoteproc framework currently relies on iommu_present() on the bus the device is on, to perform MMU management. However, this logic doesn't scale for multi-arch, especially for processors that do not have an IOMMU. Replace this logic instead by using a h/w capability flag for the presence of IOMMU in the rproc structure. This issue is seen on OMAP platforms when trying to add a remoteproc driver for a small Cortex M3 called the WkupM3 used for suspend / resume management on TI AM335/AM437x SoCs. This processor does not have an MMU. Same is the case with another processor subsystem PRU-ICSS on AM335/AM437x. All these are platform devices, and the current iommu_present check will not scale for the same kernel image to support OMAP4/OMAP5 and AM335/AM437x. The existing platform implementation drivers - OMAP remoteproc, STE Modem remoteproc and DA8xx remoteproc, are updated as well to properly configure the newly added rproc field. Cc: Robert Tivy <rtivy@ti.com> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Suman Anna <s-anna@ti.com> [small change in the commit title and in a single comment] Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Diffstat (limited to 'drivers/remoteproc')
-rw-r--r--drivers/remoteproc/da8xx_remoteproc.c1
-rw-r--r--drivers/remoteproc/omap_remoteproc.c2
-rw-r--r--drivers/remoteproc/remoteproc_core.c15
-rw-r--r--drivers/remoteproc/ste_modem_rproc.c1
4 files changed, 6 insertions, 13 deletions
diff --git a/drivers/remoteproc/da8xx_remoteproc.c b/drivers/remoteproc/da8xx_remoteproc.c
index 89fd057e5f1d..f8d6a0661c14 100644
--- a/drivers/remoteproc/da8xx_remoteproc.c
+++ b/drivers/remoteproc/da8xx_remoteproc.c
@@ -224,6 +224,7 @@ static int da8xx_rproc_probe(struct platform_device *pdev)
drproc = rproc->priv;
drproc->rproc = rproc;
+ rproc->has_iommu = false;
platform_set_drvdata(pdev, rproc);
diff --git a/drivers/remoteproc/omap_remoteproc.c b/drivers/remoteproc/omap_remoteproc.c
index e85f30370760..b74368a91235 100644
--- a/drivers/remoteproc/omap_remoteproc.c
+++ b/drivers/remoteproc/omap_remoteproc.c
@@ -202,6 +202,8 @@ static int omap_rproc_probe(struct platform_device *pdev)
oproc = rproc->priv;
oproc->rproc = rproc;
+ /* All existing OMAP IPU and DSP processors have an MMU */
+ rproc->has_iommu = true;
platform_set_drvdata(pdev, rproc);
diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index 3cd85a638afa..11cdb119e4f3 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -94,19 +94,8 @@ static int rproc_enable_iommu(struct rproc *rproc)
struct device *dev = rproc->dev.parent;
int ret;
- /*
- * We currently use iommu_present() to decide if an IOMMU
- * setup is needed.
- *
- * This works for simple cases, but will easily fail with
- * platforms that do have an IOMMU, but not for this specific
- * rproc.
- *
- * This will be easily solved by introducing hw capabilities
- * that will be set by the remoteproc driver.
- */
- if (!iommu_present(dev->bus)) {
- dev_dbg(dev, "iommu not found\n");
+ if (!rproc->has_iommu) {
+ dev_dbg(dev, "iommu not present\n");
return 0;
}
diff --git a/drivers/remoteproc/ste_modem_rproc.c b/drivers/remoteproc/ste_modem_rproc.c
index 16b7b7bd805b..dd193f35a1ff 100644
--- a/drivers/remoteproc/ste_modem_rproc.c
+++ b/drivers/remoteproc/ste_modem_rproc.c
@@ -289,6 +289,7 @@ static int sproc_probe(struct platform_device *pdev)
sproc = rproc->priv;
sproc->mdev = mdev;
sproc->rproc = rproc;
+ rproc->has_iommu = false;
mdev->drv_data = sproc;
/* Provide callback functions to modem device */