summaryrefslogtreecommitdiff
path: root/drivers/reset
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2021-11-04 03:00:52 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2021-11-04 03:00:52 +0300
commitd461e96cd22b5aeb1df448536b92e8d8e88c4a05 (patch)
treeffd7a4ddc858c79a9a30952bedf14652ac10a2e4 /drivers/reset
parentae45d84fc36d01dcb1007f4298871eec37907904 (diff)
parent6a03568932b2711c91e1572f08867690b52a18df (diff)
downloadlinux-d461e96cd22b5aeb1df448536b92e8d8e88c4a05.tar.xz
Merge tag 'drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann: "These are all the driver updates for SoC specific drivers. There are a couple of subsystems with individual maintainers picking up their patches here: - The reset controller subsystem add support for a few new SoC variants to existing drivers, along with other minor improvements - The OP-TEE subsystem gets a driver for the ARM FF-A transport - The memory controller subsystem has improvements for Tegra, Mediatek, Renesas, Freescale and Broadcom specific drivers. - The tegra cpuidle driver changes get merged through this tree this time. There are only minor changes, but they depend on other tegra driver updates here. - The ep93xx platform finally moves to using the drivers/clk/ subsystem, moving the code out of arch/arm in the process. This depends on a small sound driver change that is included here as well. - There are some minor updates for Qualcomm and Tegra specific firmware drivers. The other driver updates are mainly for drivers/soc, which contains a mixture of vendor specific drivers that don't really fit elsewhere: - Mediatek drivers gain more support for MT8192, with new support for hw-mutex and mmsys routing, plus support for reset lines in the mmsys driver. - Qualcomm gains a new "sleep stats" driver, and support for the "Generic Packet Router" in the APR driver. - There is a new user interface for routing the UARTS on ASpeed BMCs, something that apparently nobody else has needed so far. - More drivers can now be built as loadable modules, in particular for Broadcom and Samsung platforms. - Lots of improvements to the TI sysc driver for better suspend/resume support" Finally, there are lots of minor cleanups and new device IDs for amlogic, renesas, tegra, qualcomm, mediateka, samsung, imx, layerscape, allwinner, broadcom, and omap" * tag 'drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (179 commits) optee: Fix spelling mistake "reclain" -> "reclaim" Revert "firmware: qcom: scm: Add support for MC boot address API" qcom: spm: allow compile-testing firmware: arm_ffa: Remove unused 'compat_version' variable soc: samsung: exynos-chipid: add exynosautov9 SoC support firmware: qcom: scm: Don't break compile test on non-ARM platforms soc: qcom: smp2p: Add of_node_put() before goto soc: qcom: apr: Add of_node_put() before return soc: qcom: qcom_stats: Fix client votes offset soc: qcom: rpmhpd: fix sm8350_mxc's peer domain dt-bindings: arm: cpus: Document qcom,msm8916-smp enable-method ARM: qcom: Add qcom,msm8916-smp enable-method identical to MSM8226 firmware: qcom: scm: Add support for MC boot address API soc: qcom: spm: Add 8916 SPM register data dt-bindings: soc: qcom: spm: Document qcom,msm8916-saw2-v3.0-cpu soc: qcom: socinfo: Add PM8150C and SMB2351 models firmware: qcom_scm: Fix error retval in __qcom_scm_is_call_available() soc: aspeed: Add UART routing support soc: fsl: dpio: rename the enqueue descriptor variable soc: fsl: dpio: use an explicit NULL instead of 0 ...
Diffstat (limited to 'drivers/reset')
-rw-r--r--drivers/reset/Kconfig4
-rw-r--r--drivers/reset/reset-microchip-sparx5.c40
-rw-r--r--drivers/reset/reset-uniphier-glue.c4
-rw-r--r--drivers/reset/reset-uniphier.c27
4 files changed, 65 insertions, 10 deletions
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index b0056ae5d463..85024eb1d2ea 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -58,7 +58,7 @@ config RESET_BRCMSTB
a SUN_TOP_CTRL_SW_INIT style controller.
config RESET_BRCMSTB_RESCAL
- bool "Broadcom STB RESCAL reset controller"
+ tristate "Broadcom STB RESCAL reset controller"
depends on HAS_IOMEM
depends on ARCH_BRCMSTB || COMPILE_TEST
default ARCH_BRCMSTB
@@ -116,7 +116,7 @@ config RESET_LPC18XX
config RESET_MCHP_SPARX5
bool "Microchip Sparx5 reset driver"
- depends on ARCH_SPARX5 || COMPILE_TEST
+ depends on ARCH_SPARX5 || SOC_LAN966 || COMPILE_TEST
default y if SPARX5_SWITCH
select MFD_SYSCON
help
diff --git a/drivers/reset/reset-microchip-sparx5.c b/drivers/reset/reset-microchip-sparx5.c
index f01e7db8e83b..00b612a0effa 100644
--- a/drivers/reset/reset-microchip-sparx5.c
+++ b/drivers/reset/reset-microchip-sparx5.c
@@ -13,15 +13,18 @@
#include <linux/regmap.h>
#include <linux/reset-controller.h>
-#define PROTECT_REG 0x84
-#define PROTECT_BIT BIT(10)
-#define SOFT_RESET_REG 0x00
-#define SOFT_RESET_BIT BIT(1)
+struct reset_props {
+ u32 protect_reg;
+ u32 protect_bit;
+ u32 reset_reg;
+ u32 reset_bit;
+};
struct mchp_reset_context {
struct regmap *cpu_ctrl;
struct regmap *gcb_ctrl;
struct reset_controller_dev rcdev;
+ const struct reset_props *props;
};
static struct regmap_config sparx5_reset_regmap_config = {
@@ -38,14 +41,16 @@ static int sparx5_switch_reset(struct reset_controller_dev *rcdev,
u32 val;
/* Make sure the core is PROTECTED from reset */
- regmap_update_bits(ctx->cpu_ctrl, PROTECT_REG, PROTECT_BIT, PROTECT_BIT);
+ regmap_update_bits(ctx->cpu_ctrl, ctx->props->protect_reg,
+ ctx->props->protect_bit, ctx->props->protect_bit);
/* Start soft reset */
- regmap_write(ctx->gcb_ctrl, SOFT_RESET_REG, SOFT_RESET_BIT);
+ regmap_write(ctx->gcb_ctrl, ctx->props->reset_reg,
+ ctx->props->reset_bit);
/* Wait for soft reset done */
- return regmap_read_poll_timeout(ctx->gcb_ctrl, SOFT_RESET_REG, val,
- (val & SOFT_RESET_BIT) == 0,
+ return regmap_read_poll_timeout(ctx->gcb_ctrl, ctx->props->reset_reg, val,
+ (val & ctx->props->reset_bit) == 0,
1, 100);
}
@@ -115,13 +120,32 @@ static int mchp_sparx5_reset_probe(struct platform_device *pdev)
ctx->rcdev.nr_resets = 1;
ctx->rcdev.ops = &sparx5_reset_ops;
ctx->rcdev.of_node = dn;
+ ctx->props = device_get_match_data(&pdev->dev);
return devm_reset_controller_register(&pdev->dev, &ctx->rcdev);
}
+static const struct reset_props reset_props_sparx5 = {
+ .protect_reg = 0x84,
+ .protect_bit = BIT(10),
+ .reset_reg = 0x0,
+ .reset_bit = BIT(1),
+};
+
+static const struct reset_props reset_props_lan966x = {
+ .protect_reg = 0x88,
+ .protect_bit = BIT(5),
+ .reset_reg = 0x0,
+ .reset_bit = BIT(1),
+};
+
static const struct of_device_id mchp_sparx5_reset_of_match[] = {
{
.compatible = "microchip,sparx5-switch-reset",
+ .data = &reset_props_sparx5,
+ }, {
+ .compatible = "microchip,lan966x-switch-reset",
+ .data = &reset_props_lan966x,
},
{ }
};
diff --git a/drivers/reset/reset-uniphier-glue.c b/drivers/reset/reset-uniphier-glue.c
index 027990b79f61..908c1d5bc41e 100644
--- a/drivers/reset/reset-uniphier-glue.c
+++ b/drivers/reset/reset-uniphier-glue.c
@@ -156,6 +156,10 @@ static const struct of_device_id uniphier_glue_reset_match[] = {
.data = &uniphier_pxs2_data,
},
{
+ .compatible = "socionext,uniphier-nx1-usb3-reset",
+ .data = &uniphier_pxs2_data,
+ },
+ {
.compatible = "socionext,uniphier-pro4-ahci-reset",
.data = &uniphier_pro4_data,
},
diff --git a/drivers/reset/reset-uniphier.c b/drivers/reset/reset-uniphier.c
index 5f75783f9397..ff7580f38056 100644
--- a/drivers/reset/reset-uniphier.c
+++ b/drivers/reset/reset-uniphier.c
@@ -136,6 +136,21 @@ static const struct uniphier_reset_data uniphier_pxs3_sys_reset_data[] = {
UNIPHIER_RESETX(28, 0x200c, 7), /* SATA0 */
UNIPHIER_RESETX(29, 0x200c, 8), /* SATA1 */
UNIPHIER_RESETX(30, 0x200c, 21), /* SATA-PHY */
+ UNIPHIER_RESETX(40, 0x2008, 0), /* AIO */
+ UNIPHIER_RESETX(42, 0x2010, 2), /* EXIV */
+ UNIPHIER_RESET_END,
+};
+
+static const struct uniphier_reset_data uniphier_nx1_sys_reset_data[] = {
+ UNIPHIER_RESETX(4, 0x2008, 8), /* eMMC */
+ UNIPHIER_RESETX(6, 0x200c, 0), /* Ether */
+ UNIPHIER_RESETX(12, 0x200c, 16), /* USB30 link */
+ UNIPHIER_RESETX(16, 0x200c, 24), /* USB30-PHY0 */
+ UNIPHIER_RESETX(17, 0x200c, 25), /* USB30-PHY1 */
+ UNIPHIER_RESETX(18, 0x200c, 26), /* USB30-PHY2 */
+ UNIPHIER_RESETX(24, 0x200c, 8), /* PCIe */
+ UNIPHIER_RESETX(52, 0x2010, 0), /* VOC */
+ UNIPHIER_RESETX(58, 0x2010, 8), /* HDMI-Tx */
UNIPHIER_RESET_END,
};
@@ -400,6 +415,10 @@ static const struct of_device_id uniphier_reset_match[] = {
.compatible = "socionext,uniphier-pxs3-reset",
.data = uniphier_pxs3_sys_reset_data,
},
+ {
+ .compatible = "socionext,uniphier-nx1-reset",
+ .data = uniphier_nx1_sys_reset_data,
+ },
/* Media I/O reset, SD reset */
{
.compatible = "socionext,uniphier-ld4-mio-reset",
@@ -437,6 +456,10 @@ static const struct of_device_id uniphier_reset_match[] = {
.compatible = "socionext,uniphier-pxs3-sd-reset",
.data = uniphier_pro5_sd_reset_data,
},
+ {
+ .compatible = "socionext,uniphier-nx1-sd-reset",
+ .data = uniphier_pro5_sd_reset_data,
+ },
/* Peripheral reset */
{
.compatible = "socionext,uniphier-ld4-peri-reset",
@@ -470,6 +493,10 @@ static const struct of_device_id uniphier_reset_match[] = {
.compatible = "socionext,uniphier-pxs3-peri-reset",
.data = uniphier_pro4_peri_reset_data,
},
+ {
+ .compatible = "socionext,uniphier-nx1-peri-reset",
+ .data = uniphier_pro4_peri_reset_data,
+ },
/* Analog signal amplifiers reset */
{
.compatible = "socionext,uniphier-ld11-adamv-reset",