diff options
author | Julian Wiedmann <jwi@linux.vnet.ibm.com> | 2017-05-10 20:07:52 +0300 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2017-05-11 19:37:48 +0300 |
commit | 2d2ebb3ed0c6acfb014f98e427298673a5d07b82 (patch) | |
tree | ab2b6d651d8ac4841bd985fd73bc163143dd779b /drivers/s390/net/qeth_core_sys.c | |
parent | 9111e7880ccf419548c7b0887df020b08eadb075 (diff) | |
download | linux-2d2ebb3ed0c6acfb014f98e427298673a5d07b82.tar.xz |
s390/qeth: unbreak OSM and OSN support
commit b4d72c08b358 ("qeth: bridgeport support - basic control")
broke the support for OSM and OSN devices as follows:
As OSM and OSN are L2 only, qeth_core_probe_device() does an early
setup by loading the l2 discipline and calling qeth_l2_probe_device().
In this context, adding the l2-specific bridgeport sysfs attributes
via qeth_l2_create_device_attributes() hits a BUG_ON in fs/sysfs/group.c,
since the basic sysfs infrastructure for the device hasn't been
established yet.
Note that OSN actually has its own unique sysfs attributes
(qeth_osn_devtype), so the additional attributes shouldn't be created
at all.
For OSM, add a new qeth_l2_devtype that contains all the common
and l2-specific sysfs attributes.
When qeth_core_probe_device() does early setup for OSM or OSN, assign
the corresponding devtype so that the ccwgroup probe code creates the
full set of sysfs attributes.
This allows us to skip qeth_l2_create_device_attributes() in case
of an early setup.
Any device that can't do early setup will initially have only the
generic sysfs attributes, and when it's probed later
qeth_l2_probe_device() adds the l2-specific attributes.
If an early-setup device is removed (by calling ccwgroup_ungroup()),
device_unregister() will - using the devtype - delete the
l2-specific attributes before qeth_l2_remove_device() is called.
So make sure to not remove them twice.
What complicates the issue is that qeth_l2_probe_device() and
qeth_l2_remove_device() is also called on a device when its
layer2 attribute changes (ie. its layer mode is switched).
For early-setup devices this wouldn't work properly - we wouldn't
remove the l2-specific attributes when switching to L3.
But switching the layer mode doesn't actually make any sense;
we already decided that the device can only operate in L2!
So just refuse to switch the layer mode on such devices. Note that
OSN doesn't have a layer2 attribute, so we only need to special-case
OSM.
Based on an initial patch by Ursula Braun.
Fixes: b4d72c08b358 ("qeth: bridgeport support - basic control")
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/s390/net/qeth_core_sys.c')
-rw-r--r-- | drivers/s390/net/qeth_core_sys.c | 22 |
1 files changed, 14 insertions, 8 deletions
diff --git a/drivers/s390/net/qeth_core_sys.c b/drivers/s390/net/qeth_core_sys.c index 412ff61891ac..db6a285d41e0 100644 --- a/drivers/s390/net/qeth_core_sys.c +++ b/drivers/s390/net/qeth_core_sys.c @@ -413,12 +413,16 @@ static ssize_t qeth_dev_layer2_store(struct device *dev, if (card->options.layer2 == newdis) goto out; - else { - card->info.mac_bits = 0; - if (card->discipline) { - card->discipline->remove(card->gdev); - qeth_core_free_discipline(card); - } + if (card->info.type == QETH_CARD_TYPE_OSM) { + /* fixed layer, can't switch */ + rc = -EOPNOTSUPP; + goto out; + } + + card->info.mac_bits = 0; + if (card->discipline) { + card->discipline->remove(card->gdev); + qeth_core_free_discipline(card); } rc = qeth_core_load_discipline(card, newdis); @@ -705,10 +709,11 @@ static struct attribute *qeth_blkt_device_attrs[] = { &dev_attr_inter_jumbo.attr, NULL, }; -static struct attribute_group qeth_device_blkt_group = { +const struct attribute_group qeth_device_blkt_group = { .name = "blkt", .attrs = qeth_blkt_device_attrs, }; +EXPORT_SYMBOL_GPL(qeth_device_blkt_group); static struct attribute *qeth_device_attrs[] = { &dev_attr_state.attr, @@ -728,9 +733,10 @@ static struct attribute *qeth_device_attrs[] = { &dev_attr_switch_attrs.attr, NULL, }; -static struct attribute_group qeth_device_attr_group = { +const struct attribute_group qeth_device_attr_group = { .attrs = qeth_device_attrs, }; +EXPORT_SYMBOL_GPL(qeth_device_attr_group); const struct attribute_group *qeth_generic_attr_groups[] = { &qeth_device_attr_group, |