summaryrefslogtreecommitdiff
path: root/drivers/scsi/Kconfig
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2020-04-03 03:03:53 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2020-04-03 03:03:53 +0300
commit79f51b7b9c4719303f758ae8406c4e5997ed6aa3 (patch)
tree33ca1c3ee11848e75d90f811038fcd149e69d258 /drivers/scsi/Kconfig
parente109f506074152b7241bcbd3949a099e776cb802 (diff)
parentff275db92c935858454b721f0d960fff421634d3 (diff)
downloadlinux-79f51b7b9c4719303f758ae8406c4e5997ed6aa3.tar.xz
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley: "This series has a huge amount of churn because it pulls in Mauro's doc update changing all our txt files to rst ones. Excluding that, we have the usual driver updates (qla2xxx, ufs, lpfc, zfcp, ibmvfc, pm80xx, aacraid), a treewide update for scnprintf and some other minor updates. The major core change is Hannes moving functions out of the aacraid driver and into the core" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (223 commits) scsi: aic7xxx: aic97xx: Remove FreeBSD-specific code scsi: ufs: Do not rely on prefetched data scsi: dc395x: remove dc395x_bios_param scsi: libiscsi: Fix error count for active session scsi: hpsa: correct race condition in offload enabled scsi: message: fusion: Replace zero-length array with flexible-array member scsi: qedi: Add PCI shutdown handler support scsi: qedi: Add MFW error recovery process scsi: ufs: Enable block layer runtime PM for well-known logical units scsi: ufs-qcom: Override devfreq parameters scsi: ufshcd: Let vendor override devfreq parameters scsi: ufshcd: Update the set frequency to devfreq scsi: ufs: Resume ufs host before accessing ufs device scsi: ufs-mediatek: customize the delay for enabling host scsi: ufs: make HCE polling more compact to improve initialization latency scsi: ufs: allow custom delay prior to host enabling scsi: ufs-mediatek: use common delay function scsi: ufs: introduce common and flexible delay function scsi: ufs: use an enum for host capabilities scsi: ufs: fix uninitialized tx_lanes in ufshcd_disable_tx_lcc() ...
Diffstat (limited to 'drivers/scsi/Kconfig')
-rw-r--r--drivers/scsi/Kconfig51
1 files changed, 21 insertions, 30 deletions
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 1b6eaf8da5fa..17feff174f57 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -33,7 +33,7 @@ config SCSI
Channel, and FireWire storage.
To compile this driver as a module, choose M here and read
- <file:Documentation/scsi/scsi.txt>.
+ <file:Documentation/scsi/scsi.rst>.
The module will be called scsi_mod.
However, do not compile this as a module if your root file system
@@ -79,7 +79,7 @@ config BLK_DEV_SD
CD-ROMs.
To compile this driver as a module, choose M here and read
- <file:Documentation/scsi/scsi.txt>.
+ <file:Documentation/scsi/scsi.rst>.
The module will be called sd_mod.
Do not compile this driver as a module if your root file system
@@ -94,11 +94,11 @@ config CHR_DEV_ST
If you want to use a SCSI tape drive under Linux, say Y and read the
SCSI-HOWTO, available from
<http://www.tldp.org/docs.html#howto>, and
- <file:Documentation/scsi/st.txt> in the kernel source. This is NOT
+ <file:Documentation/scsi/st.rst> in the kernel source. This is NOT
for SCSI CD-ROMs.
To compile this driver as a module, choose M here and read
- <file:Documentation/scsi/scsi.txt>. The module will be called st.
+ <file:Documentation/scsi/scsi.rst>. The module will be called st.
config BLK_DEV_SR
tristate "SCSI CDROM support"
@@ -112,18 +112,9 @@ config BLK_DEV_SR
Make sure to say Y or M to "ISO 9660 CD-ROM file system support".
To compile this driver as a module, choose M here and read
- <file:Documentation/scsi/scsi.txt>.
+ <file:Documentation/scsi/scsi.rst>.
The module will be called sr_mod.
-config BLK_DEV_SR_VENDOR
- bool "Enable vendor-specific extensions (for SCSI CDROM)"
- depends on BLK_DEV_SR
- help
- This enables the usage of vendor specific SCSI commands. This is
- required to support multisession CDs with old NEC/TOSHIBA cdrom
- drives (and HP Writers). If you have such a drive and get the first
- session only, try saying Y here; everybody else says N.
-
config CHR_DEV_SG
tristate "SCSI generic support"
depends on SCSI
@@ -142,10 +133,10 @@ config CHR_DEV_SG
quality digital reader of audio CDs (<http://www.xiph.org/paranoia/>).
For other devices, it's possible that you'll have to write the
driver software yourself. Please read the file
- <file:Documentation/scsi/scsi-generic.txt> for more information.
+ <file:Documentation/scsi/scsi-generic.rst> for more information.
To compile this driver as a module, choose M here and read
- <file:Documentation/scsi/scsi.txt>. The module will be called sg.
+ <file:Documentation/scsi/scsi.rst>. The module will be called sg.
If unsure, say N.
@@ -158,12 +149,12 @@ config CHR_DEV_SCH
don't need this for those tiny 6-slot cdrom changers. Media
changers are listed as "Type: Medium Changer" in /proc/scsi/scsi.
If you have such hardware and want to use it with linux, say Y
- here. Check <file:Documentation/scsi/scsi-changer.txt> for details.
+ here. Check <file:Documentation/scsi/scsi-changer.rst> for details.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/kbuild/modules.rst> and
- <file:Documentation/scsi/scsi.txt>. The module will be called ch.o.
+ <file:Documentation/scsi/scsi.rst>. The module will be called ch.o.
If unsure, say N.
config SCSI_ENCLOSURE
@@ -392,7 +383,7 @@ config SCSI_AHA152X
It is explained in section 3.3 of the SCSI-HOWTO, available from
<http://www.tldp.org/docs.html#howto>. You might also want to
- read the file <file:Documentation/scsi/aha152x.txt>.
+ read the file <file:Documentation/scsi/aha152x.rst>.
To compile this driver as a module, choose M here: the
module will be called aha152x.
@@ -430,7 +421,7 @@ config SCSI_AACRAID
help
This driver supports a variety of Dell, HP, Adaptec, IBM and
ICP storage products. For a list of supported products, refer
- to <file:Documentation/scsi/aacraid.txt>.
+ to <file:Documentation/scsi/aacraid.rst>.
To compile this driver as a module, choose M here: the module
will be called aacraid.
@@ -457,7 +448,7 @@ config SCSI_DPT_I2O
help
This driver supports all of Adaptec's I2O based RAID controllers as
well as the DPT SmartRaid V cards. This is an Adaptec maintained
- driver by Deanna Bonds. See <file:Documentation/scsi/dpti.txt>.
+ driver by Deanna Bonds. See <file:Documentation/scsi/dpti.rst>.
To compile this driver as a module, choose M here: the
module will be called dpt_i2o.
@@ -511,8 +502,8 @@ config SCSI_BUSLOGIC
This is support for BusLogic MultiMaster and FlashPoint SCSI Host
Adapters. Consult the SCSI-HOWTO, available from
<http://www.tldp.org/docs.html#howto>, and the files
- <file:Documentation/scsi/BusLogic.txt> and
- <file:Documentation/scsi/FlashPoint.txt> for more information.
+ <file:Documentation/scsi/BusLogic.rst> and
+ <file:Documentation/scsi/FlashPoint.rst> for more information.
Note that support for FlashPoint is only available for 32-bit
x86 configurations.
@@ -613,7 +604,7 @@ config FCOE_FNIC
This is support for the Cisco PCI-Express FCoE HBA.
To compile this driver as a module, choose M here and read
- <file:Documentation/scsi/scsi.txt>.
+ <file:Documentation/scsi/scsi.rst>.
The module will be called fnic.
config SCSI_SNIC
@@ -623,7 +614,7 @@ config SCSI_SNIC
This is support for the Cisco PCI-Express SCSI HBA.
To compile this driver as a module, choose M here and read
- <file:Documentation/scsi/scsi.txt>.
+ <file:Documentation/scsi/scsi.rst>.
The module will be called snic.
config SCSI_SNIC_DEBUG_FS
@@ -813,7 +804,7 @@ config SCSI_PPA
newer drives)", below.
For more information about this driver and how to use it you should
- read the file <file:Documentation/scsi/ppa.txt>. You should also read
+ read the file <file:Documentation/scsi/ppa.rst>. You should also read
the SCSI-HOWTO, which is available from
<http://www.tldp.org/docs.html#howto>. If you use this driver,
you will still be able to use the parallel port for other tasks,
@@ -840,7 +831,7 @@ config SCSI_IMM
here and Y to "IOMEGA Parallel Port (ppa - older drives)", above.
For more information about this driver and how to use it you should
- read the file <file:Documentation/scsi/ppa.txt>. You should also read
+ read the file <file:Documentation/scsi/ppa.rst>. You should also read
the SCSI-HOWTO, which is available from
<http://www.tldp.org/docs.html#howto>. If you use this driver,
you will still be able to use the parallel port for other tasks,
@@ -930,7 +921,7 @@ config SCSI_SYM53C8XX_2
language. It does not support LSI53C10XX Ultra-320 PCI-X SCSI
controllers; you need to use the Fusion MPT driver for that.
- Please read <file:Documentation/scsi/sym53c8xx_2.txt> for more
+ Please read <file:Documentation/scsi/sym53c8xx_2.rst> for more
information.
config SCSI_SYM53C8XX_DMA_ADDRESSING_MODE
@@ -1127,7 +1118,7 @@ config SCSI_QLOGIC_FAS
SCSI support"), below.
Information about this driver is contained in
- <file:Documentation/scsi/qlogicfas.txt>. You should also read the
+ <file:Documentation/scsi/qlogicfas.rst>. You should also read the
SCSI-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
@@ -1197,7 +1188,7 @@ config SCSI_DC395x
This driver works, but is still in experimental status. So better
have a bootable disk and a backup in case of emergency.
- Documentation can be found in <file:Documentation/scsi/dc395x.txt>.
+ Documentation can be found in <file:Documentation/scsi/dc395x.rst>.
To compile this driver as a module, choose M here: the
module will be called dc395x.