summaryrefslogtreecommitdiff
path: root/drivers/scsi/g_NCR5380.c
diff options
context:
space:
mode:
authorFinn Thain <fthain@telegraphics.com.au>2016-03-23 13:10:10 +0300
committerMartin K. Petersen <martin.petersen@oracle.com>2016-04-11 23:57:09 +0300
commit9d376402c80cfe2356d84577d366ca790e576bd9 (patch)
tree83b3b800e6866c22c161df43e188a6e4be73ae74 /drivers/scsi/g_NCR5380.c
parente1f0bce3a0db95007fec756225801e50477f32fd (diff)
downloadlinux-9d376402c80cfe2356d84577d366ca790e576bd9.tar.xz
g_ncr5380: Remove CONFIG_SCSI_GENERIC_NCR53C400
This change brings a number of improvements: fewer macros, better test coverage, simpler code and sane Kconfig options. The downside is a small chance of incompatibility (which seems unavoidable). CONFIG_SCSI_GENERIC_NCR53C400 exists to enable or inhibit pseudo DMA transfers when the driver is used with 53C400-compatible cards. Thanks to Ondrej Zary's patches, PDMA now works which means it can be enabled unconditionally. Due to bad design, CONFIG_SCSI_GENERIC_NCR53C400 ties together unrelated functionality as it sets both PSEUDO_DMA and BIOSPARAM macros. This patch effectively enables PSEUDO_DMA and disables BIOSPARAM. The defconfigs and the Kconfig default leave CONFIG_SCSI_GENERIC_NCR53C400 undefined. Red Hat 9 and CentOS 2.1 were the same. This leaves both PSEUDO_DMA and BIOSPARAM disabled. The effect of this patch should be better performance from enabling PSEUDO_DMA. On the other hand, Debian 4 and SLES 10 had CONFIG_SCSI_GENERIC_NCR53C400 enabled, so both PSEUDO_DMA and BIOSPARAM were enabled. This patch might affect configurations like this by disabling BIOSPARAM. My best guess is that this could be a problem only in the vanishingly rare case that 1) the CHS values stored in the boot device partition table are wrong and 2) a 5380 card is in use (because PDMA on 53C400 used to be broken). Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Reviewed-by: Hannes Reinecke <hare@suse.com> Tested-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Diffstat (limited to 'drivers/scsi/g_NCR5380.c')
-rw-r--r--drivers/scsi/g_NCR5380.c75
1 files changed, 23 insertions, 52 deletions
diff --git a/drivers/scsi/g_NCR5380.c b/drivers/scsi/g_NCR5380.c
index 90091e693020..85ebe109d15d 100644
--- a/drivers/scsi/g_NCR5380.c
+++ b/drivers/scsi/g_NCR5380.c
@@ -57,10 +57,7 @@
*/
#define AUTOPROBE_IRQ
-
-#ifdef CONFIG_SCSI_GENERIC_NCR53C400
#define PSEUDO_DMA
-#endif
#include <asm/io.h>
#include <linux/blkdev.h>
@@ -270,7 +267,7 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
#ifndef SCSI_G_NCR5380_MEM
int i;
int port_idx = -1;
- unsigned long region_size = 16;
+ unsigned long region_size;
#endif
static unsigned int __initdata ncr_53c400a_ports[] = {
0x280, 0x290, 0x300, 0x310, 0x330, 0x340, 0x348, 0x350, 0
@@ -290,6 +287,7 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
#ifdef SCSI_G_NCR5380_MEM
unsigned long base;
void __iomem *iomem;
+ resource_size_t iomem_size;
#endif
if (ncr_irq)
@@ -353,9 +351,7 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
flags = FLAG_NO_PSEUDO_DMA;
break;
case BOARD_NCR53C400:
-#ifdef PSEUDO_DMA
flags = FLAG_NO_DMA_FIXUP;
-#endif
break;
case BOARD_NCR53C400A:
flags = FLAG_NO_DMA_FIXUP;
@@ -381,20 +377,22 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
/* Disable the adapter and look for a free io port */
magic_configure(-1, 0, magic);
+ region_size = 16;
+
if (overrides[current_override].NCR5380_map_name != PORT_AUTO)
for (i = 0; ports[i]; i++) {
- if (!request_region(ports[i], 16, "ncr53c80"))
+ if (!request_region(ports[i], region_size, "ncr53c80"))
continue;
if (overrides[current_override].NCR5380_map_name == ports[i])
break;
- release_region(ports[i], 16);
+ release_region(ports[i], region_size);
} else
for (i = 0; ports[i]; i++) {
- if (!request_region(ports[i], 16, "ncr53c80"))
+ if (!request_region(ports[i], region_size, "ncr53c80"))
continue;
if (inb(ports[i]) == 0xff)
break;
- release_region(ports[i], 16);
+ release_region(ports[i], region_size);
}
if (ports[i]) {
/* At this point we have our region reserved */
@@ -410,17 +408,19 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
else
{
/* Not a 53C400A style setup - just grab */
- if(!(request_region(overrides[current_override].NCR5380_map_name, NCR5380_region_size, "ncr5380")))
+ region_size = 8;
+ if (!request_region(overrides[current_override].NCR5380_map_name,
+ region_size, "ncr5380"))
continue;
- region_size = NCR5380_region_size;
}
#else
base = overrides[current_override].NCR5380_map_name;
- if (!request_mem_region(base, NCR5380_region_size, "ncr5380"))
+ iomem_size = NCR53C400_region_size;
+ if (!request_mem_region(base, iomem_size, "ncr5380"))
continue;
- iomem = ioremap(base, NCR5380_region_size);
+ iomem = ioremap(base, iomem_size);
if (!iomem) {
- release_mem_region(base, NCR5380_region_size);
+ release_mem_region(base, iomem_size);
continue;
}
#endif
@@ -458,6 +458,7 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
#else
instance->base = overrides[current_override].NCR5380_map_name;
hostdata->iomem = iomem;
+ hostdata->iomem_size = iomem_size;
switch (overrides[current_override].board) {
case BOARD_NCR53C400:
hostdata->c400_ctl_status = 0x100;
@@ -524,7 +525,7 @@ out_release:
release_region(overrides[current_override].NCR5380_map_name, region_size);
#else
iounmap(iomem);
- release_mem_region(base, NCR5380_region_size);
+ release_mem_region(base, iomem_size);
#endif
return count;
}
@@ -546,42 +547,15 @@ static int generic_NCR5380_release_resources(struct Scsi_Host *instance)
#ifndef SCSI_G_NCR5380_MEM
release_region(instance->io_port, instance->n_io_port);
#else
- iounmap(((struct NCR5380_hostdata *)instance->hostdata)->iomem);
- release_mem_region(instance->base, NCR5380_region_size);
-#endif
- return 0;
-}
-
-#ifdef BIOSPARAM
-/**
- * generic_NCR5380_biosparam
- * @disk: disk to compute geometry for
- * @dev: device identifier for this disk
- * @ip: sizes to fill in
- *
- * Generates a BIOS / DOS compatible H-C-S mapping for the specified
- * device / size.
- *
- * XXX Most SCSI boards use this mapping, I could be incorrect. Someone
- * using hard disks on a trantor should verify that this mapping
- * corresponds to that used by the BIOS / ASPI driver by running the linux
- * fdisk program and matching the H_C_S coordinates to what DOS uses.
- *
- * Locks: none
- */
+ {
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
-static int
-generic_NCR5380_biosparam(struct scsi_device *sdev, struct block_device *bdev,
- sector_t capacity, int *ip)
-{
- ip[0] = 64;
- ip[1] = 32;
- ip[2] = capacity >> 11;
+ iounmap(hostdata->iomem);
+ release_mem_region(instance->base, hostdata->iomem_size);
+ }
+#endif
return 0;
}
-#endif
-
-#ifdef PSEUDO_DMA
/**
* NCR5380_pread - pseudo DMA read
@@ -756,8 +730,6 @@ static int generic_NCR5380_dma_xfer_len(struct scsi_cmnd *cmd)
return transfersize;
}
-#endif /* PSEUDO_DMA */
-
/*
* Include the NCR5380 core code that we build our driver around
*/
@@ -773,7 +745,6 @@ static struct scsi_host_template driver_template = {
.queuecommand = generic_NCR5380_queue_command,
.eh_abort_handler = generic_NCR5380_abort,
.eh_bus_reset_handler = generic_NCR5380_bus_reset,
- .bios_param = NCR5380_BIOSPARAM,
.can_queue = 16,
.this_id = 7,
.sg_tablesize = SG_ALL,