scsi: lpfc: Enhancements to LOG_TRACE_EVENT for better readability

While testing recent discovery node rework, several items were seen that
could be done better with respect to the new trace event logic.

1) in the following msg:
      kernel: lpfc 0000:44:00.0: start 35 end 35 cnt 0
   If cnt is zero in the 1st message, there is no reason to display the
   1st message, which is just giving start/end positioning.

   Fix by not displaying message if cnt is 0.

2) If the driver is loaded with module log verbosity off, and later a
   single NPIV host instance verbosity is enabled via sysfs, it enables
   messages on all instances. This is due to the trace log verbosity checks
   (lpfc_dmp_dbg) looking at the phba only. It should look at the phba and
   the vport.

   Fix by enabling a check on both phba and vport.

3) in the following messages:
       2904 Firmware Dump Image Present on Adapter
       2887 Reset Needed: Attempting Port Recovery...
   These messages are not necessary for the trace event log, which is
   primarily for discovery.

   Fix by changing log level on these 2 messages to LOG_SLI.

Link: https://lore.kernel.org/r/20210104180240.46824-15-jsmart2021@gmail.com
Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

2 files changed, 20 insertions, 2 deletions

diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index dbd7e40f67f9..71f340dd4fbd 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -1865,7 +1865,7 @@ lpfc_sli4_port_sta_fn_reset(struct lpfc_hba *phba, int mbx_action,
 
 	/* need reset: attempt for port recovery */
 	if (en_rn_msg)
-		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
 				"2887 Reset Needed: Attempting Port "
 				"Recovery...\n");
 
@@ -14177,15 +14177,32 @@ void lpfc_dmp_dbg(struct lpfc_hba *phba)
 	int i;
 	int j = 0;
 	unsigned long rem_nsec;
+	struct lpfc_vport **vports;
 
+	/* Don't dump messages if we explicitly set log_verbose for the
+	 * physical port or any vport.
+	 */
 	if (phba->cfg_log_verbose)
 		return;
 
+	vports = lpfc_create_vport_work_array(phba);
+	if (vports != NULL) {
+		for (i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+			if (vports[i]->cfg_log_verbose) {
+				lpfc_destroy_vport_work_array(phba, vports);
+				return;
+			}
+		}
+	}
+	lpfc_destroy_vport_work_array(phba, vports);
+
 	if (atomic_cmpxchg(&phba->dbg_log_dmping, 0, 1) != 0)
 		return;
 
 	start_idx = (unsigned int)atomic_read(&phba->dbg_log_idx) % DBG_LOG_SZ;
 	dbg_cnt = (unsigned int)atomic_read(&phba->dbg_log_cnt);
+	if (!dbg_cnt)
+		goto out;
 	temp_idx = start_idx;
 	if (dbg_cnt >= DBG_LOG_SZ) {
 		dbg_cnt = DBG_LOG_SZ;
@@ -14215,6 +14232,7 @@ void lpfc_dmp_dbg(struct lpfc_hba *phba)
 			 rem_nsec / 1000,
 			 phba->dbg_log[temp_idx].log);
 	}
+out:
 	atomic_set(&phba->dbg_log_cnt, 0);
 	atomic_set(&phba->dbg_log_dmping, 0);
 }
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index d51d86959bbc..fa1a714a78f0 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -7491,7 +7491,7 @@ static void lpfc_sli4_dip(struct lpfc_hba *phba)
 			return;
 
 		if (bf_get(lpfc_sliport_status_dip, &reg_data))
-			lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+			lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
 					"2904 Firmware Dump Image Present"
 					" on Adapter");
 	}