summaryrefslogtreecommitdiff
path: root/drivers/scsi/qla1280.c
diff options
context:
space:
mode:
authorChristoph Hellwig <hch@lst.de>2005-07-04 19:49:22 +0400
committerJames Bottomley <jejb@mulgrave.(none)>2005-08-02 20:43:51 +0400
commit7a34766fdcec0c619aa68ace203b934dd7cf9dbc (patch)
tree41a16c2fb6a6edf9f45e7ffbe23b84c042ba5207 /drivers/scsi/qla1280.c
parent0888f4c3312847eec4814a6d7cdcaaaa9fbd3345 (diff)
downloadlinux-7a34766fdcec0c619aa68ace203b934dd7cf9dbc.tar.xz
[SCSI] qla1280: don't use bitfields for hardware access, parameters
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Thiemo Seufer <ths@linux-mips.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Diffstat (limited to 'drivers/scsi/qla1280.c')
-rw-r--r--drivers/scsi/qla1280.c143
1 files changed, 72 insertions, 71 deletions
diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c
index 1a8b1147821d..6481deb57048 100644
--- a/drivers/scsi/qla1280.c
+++ b/drivers/scsi/qla1280.c
@@ -1328,7 +1328,7 @@ qla1280_set_target_parameters(struct scsi_qla_host *ha, int bus, int target)
uint8_t mr;
uint16_t mb[MAILBOX_REGISTER_COUNT];
struct nvram *nv;
- int status;
+ int status, lun;
nv = &ha->nvram;
@@ -1336,24 +1336,38 @@ qla1280_set_target_parameters(struct scsi_qla_host *ha, int bus, int target)
/* Set Target Parameters. */
mb[0] = MBC_SET_TARGET_PARAMETERS;
- mb[1] = (uint16_t) (bus ? target | BIT_7 : target);
- mb[1] <<= 8;
-
- mb[2] = (nv->bus[bus].target[target].parameter.c << 8);
+ mb[1] = (uint16_t)((bus ? target | BIT_7 : target) << 8);
+ mb[2] = nv->bus[bus].target[target].parameter.renegotiate_on_error << 8;
+ mb[2] |= nv->bus[bus].target[target].parameter.stop_queue_on_check << 9;
+ mb[2] |= nv->bus[bus].target[target].parameter.auto_request_sense << 10;
+ mb[2] |= nv->bus[bus].target[target].parameter.tag_queuing << 11;
+ mb[2] |= nv->bus[bus].target[target].parameter.enable_sync << 12;
+ mb[2] |= nv->bus[bus].target[target].parameter.enable_wide << 13;
+ mb[2] |= nv->bus[bus].target[target].parameter.parity_checking << 14;
+ mb[2] |= nv->bus[bus].target[target].parameter.disconnect_allowed << 15;
if (IS_ISP1x160(ha)) {
mb[2] |= nv->bus[bus].target[target].ppr_1x160.flags.enable_ppr << 5;
- mb[3] = (nv->bus[bus].target[target].flags.flags1x160.sync_offset << 8) |
- nv->bus[bus].target[target].sync_period;
+ mb[3] = (nv->bus[bus].target[target].flags.flags1x160.sync_offset << 8);
mb[6] = (nv->bus[bus].target[target].ppr_1x160.flags.ppr_options << 8) |
nv->bus[bus].target[target].ppr_1x160.flags.ppr_bus_width;
mr |= BIT_6;
} else {
- mb[3] = (nv->bus[bus].target[target].flags.flags1x80.sync_offset << 8) |
- nv->bus[bus].target[target].sync_period;
+ mb[3] = (nv->bus[bus].target[target].flags.flags1x80.sync_offset << 8);
}
+ mb[3] |= nv->bus[bus].target[target].sync_period;
+
+ status = qla1280_mailbox_command(ha, mr, mb);
- status = qla1280_mailbox_command(ha, mr, &mb[0]);
+ /* Set Device Queue Parameters. */
+ for (lun = 0; lun < MAX_LUNS; lun++) {
+ mb[0] = MBC_SET_DEVICE_QUEUE;
+ mb[1] = (uint16_t)((bus ? target | BIT_7 : target) << 8);
+ mb[1] |= lun;
+ mb[2] = nv->bus[bus].max_queue_depth;
+ mb[3] = nv->bus[bus].target[target].execution_throttle;
+ status |= qla1280_mailbox_command(ha, 0x0f, mb);
+ }
if (status)
printk(KERN_WARNING "scsi(%ld:%i:%i): "
@@ -1400,19 +1414,19 @@ qla1280_slave_configure(struct scsi_device *device)
}
#if LINUX_VERSION_CODE > 0x020500
- nv->bus[bus].target[target].parameter.f.enable_sync = device->sdtr;
- nv->bus[bus].target[target].parameter.f.enable_wide = device->wdtr;
+ nv->bus[bus].target[target].parameter.enable_sync = device->sdtr;
+ nv->bus[bus].target[target].parameter.enable_wide = device->wdtr;
nv->bus[bus].target[target].ppr_1x160.flags.enable_ppr = device->ppr;
#endif
if (driver_setup.no_sync ||
(driver_setup.sync_mask &&
(~driver_setup.sync_mask & (1 << target))))
- nv->bus[bus].target[target].parameter.f.enable_sync = 0;
+ nv->bus[bus].target[target].parameter.enable_sync = 0;
if (driver_setup.no_wide ||
(driver_setup.wide_mask &&
(~driver_setup.wide_mask & (1 << target))))
- nv->bus[bus].target[target].parameter.f.enable_wide = 0;
+ nv->bus[bus].target[target].parameter.enable_wide = 0;
if (IS_ISP1x160(ha)) {
if (driver_setup.no_ppr ||
(driver_setup.ppr_mask &&
@@ -1421,7 +1435,7 @@ qla1280_slave_configure(struct scsi_device *device)
}
spin_lock_irqsave(HOST_LOCK, flags);
- if (nv->bus[bus].target[target].parameter.f.enable_sync)
+ if (nv->bus[bus].target[target].parameter.enable_sync)
status = qla1280_set_target_parameters(ha, bus, target);
qla1280_get_target_parameters(ha, device);
spin_unlock_irqrestore(HOST_LOCK, flags);
@@ -2151,17 +2165,17 @@ qla1280_set_target_defaults(struct scsi_qla_host *ha, int bus, int target)
{
struct nvram *nv = &ha->nvram;
- nv->bus[bus].target[target].parameter.f.renegotiate_on_error = 1;
- nv->bus[bus].target[target].parameter.f.auto_request_sense = 1;
- nv->bus[bus].target[target].parameter.f.tag_queuing = 1;
- nv->bus[bus].target[target].parameter.f.enable_sync = 1;
+ nv->bus[bus].target[target].parameter.renegotiate_on_error = 1;
+ nv->bus[bus].target[target].parameter.auto_request_sense = 1;
+ nv->bus[bus].target[target].parameter.tag_queuing = 1;
+ nv->bus[bus].target[target].parameter.enable_sync = 1;
#if 1 /* Some SCSI Processors do not seem to like this */
- nv->bus[bus].target[target].parameter.f.enable_wide = 1;
+ nv->bus[bus].target[target].parameter.enable_wide = 1;
#endif
- nv->bus[bus].target[target].parameter.f.parity_checking = 1;
- nv->bus[bus].target[target].parameter.f.disconnect_allowed = 1;
nv->bus[bus].target[target].execution_throttle =
nv->bus[bus].max_queue_depth - 1;
+ nv->bus[bus].target[target].parameter.parity_checking = 1;
+ nv->bus[bus].target[target].parameter.disconnect_allowed = 1;
if (IS_ISP1x160(ha)) {
nv->bus[bus].target[target].flags.flags1x160.device_enable = 1;
@@ -2237,66 +2251,53 @@ qla1280_config_target(struct scsi_qla_host *ha, int bus, int target)
struct nvram *nv = &ha->nvram;
uint16_t mb[MAILBOX_REGISTER_COUNT];
int status, lun;
+ uint16_t flag;
/* Set Target Parameters. */
mb[0] = MBC_SET_TARGET_PARAMETERS;
- mb[1] = (uint16_t) (bus ? target | BIT_7 : target);
- mb[1] <<= 8;
-
- /*
- * Do not enable wide, sync, and ppr for the initial
- * INQUIRY run. We enable this later if we determine
- * the target actually supports it.
- */
- nv->bus[bus].target[target].parameter.f.
- auto_request_sense = 1;
- nv->bus[bus].target[target].parameter.f.
- stop_queue_on_check = 0;
-
- if (IS_ISP1x160(ha))
- nv->bus[bus].target[target].ppr_1x160.
- flags.enable_ppr = 0;
+ mb[1] = (uint16_t)((bus ? target | BIT_7 : target) << 8);
/*
- * No sync, wide, etc. while probing
+ * Do not enable sync and ppr for the initial INQUIRY run. We
+ * enable this later if we determine the target actually
+ * supports it.
*/
- mb[2] = (nv->bus[bus].target[target].parameter.c << 8) &
- ~(TP_SYNC /*| TP_WIDE | TP_PPR*/);
+ mb[2] = (TP_RENEGOTIATE | TP_AUTO_REQUEST_SENSE | TP_TAGGED_QUEUE
+ | TP_WIDE | TP_PARITY | TP_DISCONNECT);
if (IS_ISP1x160(ha))
mb[3] = nv->bus[bus].target[target].flags.flags1x160.sync_offset << 8;
else
mb[3] = nv->bus[bus].target[target].flags.flags1x80.sync_offset << 8;
mb[3] |= nv->bus[bus].target[target].sync_period;
-
- status = qla1280_mailbox_command(ha, BIT_3 | BIT_2 | BIT_1 | BIT_0, &mb[0]);
+ status = qla1280_mailbox_command(ha, 0x0f, mb);
/* Save Tag queuing enable flag. */
- mb[0] = BIT_0 << target;
- if (nv->bus[bus].target[target].parameter.f.tag_queuing)
- ha->bus_settings[bus].qtag_enables |= mb[0];
+ flag = (BIT_0 << target) & mb[0];
+ if (nv->bus[bus].target[target].parameter.tag_queuing)
+ ha->bus_settings[bus].qtag_enables |= flag;
/* Save Device enable flag. */
if (IS_ISP1x160(ha)) {
if (nv->bus[bus].target[target].flags.flags1x160.device_enable)
- ha->bus_settings[bus].device_enables |= mb[0];
+ ha->bus_settings[bus].device_enables |= flag;
ha->bus_settings[bus].lun_disables |= 0;
} else {
if (nv->bus[bus].target[target].flags.flags1x80.device_enable)
- ha->bus_settings[bus].device_enables |= mb[0];
+ ha->bus_settings[bus].device_enables |= flag;
/* Save LUN disable flag. */
if (nv->bus[bus].target[target].flags.flags1x80.lun_disable)
- ha->bus_settings[bus].lun_disables |= mb[0];
+ ha->bus_settings[bus].lun_disables |= flag;
}
/* Set Device Queue Parameters. */
for (lun = 0; lun < MAX_LUNS; lun++) {
mb[0] = MBC_SET_DEVICE_QUEUE;
- mb[1] = (uint16_t)(bus ? target | BIT_7 : target);
- mb[1] = mb[1] << 8 | lun;
+ mb[1] = (uint16_t)((bus ? target | BIT_7 : target) << 8);
+ mb[1] |= lun;
mb[2] = nv->bus[bus].max_queue_depth;
mb[3] = nv->bus[bus].target[target].execution_throttle;
- status |= qla1280_mailbox_command(ha, 0x0f, &mb[0]);
+ status |= qla1280_mailbox_command(ha, 0x0f, mb);
}
return status;
@@ -2341,7 +2342,6 @@ qla1280_nvram_config(struct scsi_qla_host *ha)
struct nvram *nv = &ha->nvram;
int bus, target, status = 0;
uint16_t mb[MAILBOX_REGISTER_COUNT];
- uint16_t mask;
ENTER("qla1280_nvram_config");
@@ -2349,7 +2349,7 @@ qla1280_nvram_config(struct scsi_qla_host *ha)
/* Always force AUTO sense for LINUX SCSI */
for (bus = 0; bus < MAX_BUSES; bus++)
for (target = 0; target < MAX_TARGETS; target++) {
- nv->bus[bus].target[target].parameter.f.
+ nv->bus[bus].target[target].parameter.
auto_request_sense = 1;
}
} else {
@@ -2416,16 +2416,17 @@ qla1280_nvram_config(struct scsi_qla_host *ha)
/* Firmware feature word. */
mb[0] = MBC_SET_FIRMWARE_FEATURES;
- mask = BIT_5 | BIT_1 | BIT_0;
- mb[1] = le16_to_cpu(nv->firmware_feature.w) & (mask);
+ mb[1] = nv->firmware_feature.f.enable_fast_posting;
+ mb[1] |= nv->firmware_feature.f.report_lvd_bus_transition << 1;
+ mb[1] |= nv->firmware_feature.f.disable_synchronous_backoff << 5;
#if defined(CONFIG_IA64_GENERIC) || defined (CONFIG_IA64_SGI_SN2)
if (ia64_platform_is("sn2")) {
printk(KERN_INFO "scsi(%li): Enabling SN2 PCI DMA "
"workaround\n", ha->host_no);
- mb[1] |= BIT_9;
+ mb[1] |= nv->firmware_feature.f.unused_9 << 9; /* XXX */
}
#endif
- status |= qla1280_mailbox_command(ha, mask, &mb[0]);
+ status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, mb);
/* Retry count and delay. */
mb[0] = MBC_SET_RETRY_COUNT;
@@ -2454,27 +2455,27 @@ qla1280_nvram_config(struct scsi_qla_host *ha)
mb[2] |= BIT_5;
if (nv->bus[1].config_2.data_line_active_negation)
mb[2] |= BIT_4;
- status |= qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, &mb[0]);
+ status |= qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, mb);
mb[0] = MBC_SET_DATA_OVERRUN_RECOVERY;
mb[1] = 2; /* Reset SCSI bus and return all outstanding IO */
- status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]);
+ status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, mb);
/* thingy */
mb[0] = MBC_SET_PCI_CONTROL;
- mb[1] = 2; /* Data DMA Channel Burst Enable */
- mb[2] = 2; /* Command DMA Channel Burst Enable */
- status |= qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, &mb[0]);
+ mb[1] = BIT_1; /* Data DMA Channel Burst Enable */
+ mb[2] = BIT_1; /* Command DMA Channel Burst Enable */
+ status |= qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, mb);
mb[0] = MBC_SET_TAG_AGE_LIMIT;
mb[1] = 8;
- status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]);
+ status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, mb);
/* Selection timeout. */
mb[0] = MBC_SET_SELECTION_TIMEOUT;
mb[1] = nv->bus[0].selection_timeout;
mb[2] = nv->bus[1].selection_timeout;
- status |= qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, &mb[0]);
+ status |= qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, mb);
for (bus = 0; bus < ha->ports; bus++)
status |= qla1280_config_bus(ha, bus);
@@ -3915,21 +3916,21 @@ qla1280_get_target_options(struct scsi_cmnd *cmd, struct scsi_qla_host *ha)
result = cmd->request_buffer;
n = &ha->nvram;
- n->bus[bus].target[target].parameter.f.enable_wide = 0;
- n->bus[bus].target[target].parameter.f.enable_sync = 0;
+ n->bus[bus].target[target].parameter.enable_wide = 0;
+ n->bus[bus].target[target].parameter.enable_sync = 0;
n->bus[bus].target[target].ppr_1x160.flags.enable_ppr = 0;
if (result[7] & 0x60)
- n->bus[bus].target[target].parameter.f.enable_wide = 1;
+ n->bus[bus].target[target].parameter.enable_wide = 1;
if (result[7] & 0x10)
- n->bus[bus].target[target].parameter.f.enable_sync = 1;
+ n->bus[bus].target[target].parameter.enable_sync = 1;
if ((result[2] >= 3) && (result[4] + 5 > 56) &&
(result[56] & 0x4))
n->bus[bus].target[target].ppr_1x160.flags.enable_ppr = 1;
dprintk(2, "get_target_options(): wide %i, sync %i, ppr %i\n",
- n->bus[bus].target[target].parameter.f.enable_wide,
- n->bus[bus].target[target].parameter.f.enable_sync,
+ n->bus[bus].target[target].parameter.enable_wide,
+ n->bus[bus].target[target].parameter.enable_sync,
n->bus[bus].target[target].ppr_1x160.flags.enable_ppr);
}
#endif