summaryrefslogtreecommitdiff
path: root/drivers/scsi
diff options
context:
space:
mode:
authorMasahiro Yamada <masahiroy@kernel.org>2020-06-13 19:50:22 +0300
committerMasahiro Yamada <masahiroy@kernel.org>2020-06-13 19:57:21 +0300
commita7f7f6248d9740d710fd6bd190293fe5e16410ac (patch)
treedc59d36a552f7e25f909f5b2edc83f96c013befa /drivers/scsi
parente4a42c82e943b97ce124539fcd7a47445b43fa0d (diff)
downloadlinux-a7f7f6248d9740d710fd6bd190293fe5e16410ac.tar.xz
treewide: replace '---help---' in Kconfig files with 'help'
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Diffstat (limited to 'drivers/scsi')
-rw-r--r--drivers/scsi/Kconfig80
-rw-r--r--drivers/scsi/aic7xxx/Kconfig.aic79xx4
-rw-r--r--drivers/scsi/aic7xxx/Kconfig.aic7xxx6
-rw-r--r--drivers/scsi/bnx2fc/Kconfig2
-rw-r--r--drivers/scsi/bnx2i/Kconfig2
-rw-r--r--drivers/scsi/cxgbi/cxgb3i/Kconfig2
-rw-r--r--drivers/scsi/cxgbi/cxgb4i/Kconfig2
-rw-r--r--drivers/scsi/esas2r/Kconfig2
-rw-r--r--drivers/scsi/mpt3sas/Kconfig8
-rw-r--r--drivers/scsi/qedf/Kconfig2
-rw-r--r--drivers/scsi/qedi/Kconfig2
-rw-r--r--drivers/scsi/qla2xxx/Kconfig6
-rw-r--r--drivers/scsi/qla4xxx/Kconfig2
-rw-r--r--drivers/scsi/smartpqi/Kconfig2
-rw-r--r--drivers/scsi/ufs/Kconfig12
15 files changed, 67 insertions, 67 deletions
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 2017c43dac1b..e9ff4cd5fbe9 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -11,7 +11,7 @@ config RAID_ATTRS
default n
depends on BLOCK
depends on SCSI_MOD
- ---help---
+ help
Provides RAID
config SCSI
@@ -20,7 +20,7 @@ config SCSI
select SCSI_DMA if HAS_DMA
select SG_POOL
select BLK_SCSI_REQUEST
- ---help---
+ help
If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or
any other SCSI device under Linux, say Y and make sure that you know
the name of your SCSI host adapter (the card inside your computer
@@ -55,7 +55,7 @@ config SCSI_PROC_FS
bool "legacy /proc/scsi/ support"
depends on SCSI && PROC_FS
default y
- ---help---
+ help
This option enables support for the various files in
/proc/scsi. In Linux 2.6 this has been superseded by
files in sysfs but many legacy applications rely on this.
@@ -69,7 +69,7 @@ config BLK_DEV_SD
tristate "SCSI disk support"
depends on SCSI
select BLK_DEV_INTEGRITY_T10 if BLK_DEV_INTEGRITY
- ---help---
+ help
If you want to use SCSI hard disks, Fibre Channel disks,
Serial ATA (SATA) or Parallel ATA (PATA) hard disks,
USB storage or the SCSI or parallel port version of
@@ -90,7 +90,7 @@ config BLK_DEV_SD
config CHR_DEV_ST
tristate "SCSI tape support"
depends on SCSI
- ---help---
+ help
If you want to use a SCSI tape drive under Linux, say Y and read the
SCSI-HOWTO, available from
<http://www.tldp.org/docs.html#howto>, and
@@ -104,7 +104,7 @@ config BLK_DEV_SR
tristate "SCSI CDROM support"
depends on SCSI && BLK_DEV
select CDROM
- ---help---
+ help
If you want to use a CD or DVD drive attached to your computer
by SCSI, FireWire, USB or ATAPI, say Y and read the SCSI-HOWTO
and the CDROM-HOWTO at <http://www.tldp.org/docs.html#howto>.
@@ -118,7 +118,7 @@ config BLK_DEV_SR
config CHR_DEV_SG
tristate "SCSI generic support"
depends on SCSI
- ---help---
+ help
If you want to use SCSI scanners, synthesizers or CD-writers or just
about anything having "SCSI" in its name other than hard disks,
CD-ROMs or tapes, say Y here. These won't be supported by the kernel
@@ -143,7 +143,7 @@ config CHR_DEV_SG
config CHR_DEV_SCH
tristate "SCSI media changer support"
depends on SCSI
- ---help---
+ help
This is a driver for SCSI media changers. Most common devices are
tape libraries and MOD/CDROM jukeboxes. *Real* jukeboxes, you
don't need this for those tiny 6-slot cdrom changers. Media
@@ -178,7 +178,7 @@ config SCSI_CONSTANTS
config SCSI_LOGGING
bool "SCSI logging facility"
depends on SCSI
- ---help---
+ help
This turns on a logging facility that can be used to debug a number
of SCSI related problems.
@@ -376,7 +376,7 @@ config SCSI_AHA152X
depends on ISA && SCSI
select SCSI_SPI_ATTRS
select CHECK_SIGNATURE
- ---help---
+ help
This is a driver for the AHA-1510, AHA-1520, AHA-1522, and AHA-2825
SCSI host adapters. It also works for the AVA-1505, but the IRQ etc.
must be manually specified in this case.
@@ -391,7 +391,7 @@ config SCSI_AHA152X
config SCSI_AHA1542
tristate "Adaptec AHA1542 support"
depends on ISA && SCSI && ISA_DMA_API
- ---help---
+ help
This is support for a SCSI host adapter. It is explained in section
3.4 of the SCSI-HOWTO, available from
<http://www.tldp.org/docs.html#howto>. Note that Trantor was
@@ -405,7 +405,7 @@ config SCSI_AHA1542
config SCSI_AHA1740
tristate "Adaptec AHA1740 support"
depends on EISA && SCSI
- ---help---
+ help
This is support for a SCSI host adapter. It is explained in section
3.5 of the SCSI-HOWTO, available from
<http://www.tldp.org/docs.html#howto>. If it doesn't work out
@@ -498,7 +498,7 @@ config SCSI_HPTIOP
config SCSI_BUSLOGIC
tristate "BusLogic SCSI support"
depends on (PCI || ISA) && SCSI && ISA_DMA_API && VIRT_TO_BUS
- ---help---
+ help
This is support for BusLogic MultiMaster and FlashPoint SCSI Host
Adapters. Consult the SCSI-HOWTO, available from
<http://www.tldp.org/docs.html#howto>, and the files
@@ -580,20 +580,20 @@ config LIBFC
tristate "LibFC module"
depends on SCSI_FC_ATTRS
select CRC32
- ---help---
+ help
Fibre Channel library module
config LIBFCOE
tristate "LibFCoE module"
depends on LIBFC
- ---help---
+ help
Library for Fibre Channel over Ethernet module
config FCOE
tristate "FCoE module"
depends on PCI
depends on LIBFCOE
- ---help---
+ help
Fibre Channel over Ethernet module
config FCOE_FNIC
@@ -672,7 +672,7 @@ config SCSI_FDOMAIN_ISA
config SCSI_GDTH
tristate "Intel/ICP (former GDT SCSI Disk Array) RAID Controller support"
depends on PCI && SCSI
- ---help---
+ help
Formerly called GDT SCSI Disk Array Controller Support.
This is a driver for RAID/SCSI Disk Array Controllers (EISA/ISA/PCI)
@@ -688,7 +688,7 @@ config SCSI_ISCI
depends on PCI && SCSI
depends on X86
select SCSI_SAS_LIBSAS
- ---help---
+ help
This driver supports the 6Gb/s SAS capabilities of the storage
control unit found in the Intel(R) C600 series chipset.
@@ -696,7 +696,7 @@ config SCSI_GENERIC_NCR5380
tristate "Generic NCR5380/53c400 SCSI ISA card support"
depends on ISA && SCSI && HAS_IOPORT_MAP
select SCSI_SPI_ATTRS
- ---help---
+ help
This is a driver for old ISA card SCSI controllers based on a
NCR 5380, 53C80, 53C400, 53C400A, or DTC 436 device.
Most boards such as the Trantor T130 fit this category, as do
@@ -708,7 +708,7 @@ config SCSI_GENERIC_NCR5380
config SCSI_IPS
tristate "IBM ServeRAID support"
depends on PCI && SCSI
- ---help---
+ help
This is support for the IBM ServeRAID hardware RAID controllers.
See <http://www.developer.ibm.com/welcome/netfinity/serveraid.html>
and <http://www-947.ibm.com/support/entry/portal/docdisplay?brand=5000008&lndocid=SERV-RAID>
@@ -790,7 +790,7 @@ config SCSI_INIA100
config SCSI_PPA
tristate "IOMEGA parallel port (ppa - older drives)"
depends on SCSI && PARPORT_PC
- ---help---
+ help
This driver supports older versions of IOMEGA's parallel port ZIP
drive (a 100 MB removable media device).
@@ -817,7 +817,7 @@ config SCSI_PPA
config SCSI_IMM
tristate "IOMEGA parallel port (imm - newer drives)"
depends on SCSI && PARPORT_PC
- ---help---
+ help
This driver supports newer versions of IOMEGA's parallel port ZIP
drive (a 100 MB removable media device).
@@ -844,7 +844,7 @@ config SCSI_IMM
config SCSI_IZIP_EPP16
bool "ppa/imm option - Use slow (but safe) EPP-16"
depends on SCSI_PPA || SCSI_IMM
- ---help---
+ help
EPP (Enhanced Parallel Port) is a standard for parallel ports which
allows them to act as expansion buses that can handle up to 64
peripheral devices.
@@ -896,7 +896,7 @@ config 53C700_LE_ON_BE
config SCSI_STEX
tristate "Promise SuperTrak EX Series support"
depends on PCI && SCSI
- ---help---
+ help
This driver supports Promise SuperTrak EX series storage controllers.
Promise provides Linux RAID configuration utility for these
@@ -914,7 +914,7 @@ config SCSI_SYM53C8XX_2
tristate "SYM53C8XX Version 2 SCSI support"
depends on PCI && SCSI
select SCSI_SPI_ATTRS
- ---help---
+ help
This driver supports the whole NCR53C8XX/SYM53C8XX family of
PCI-SCSI controllers. It also supports the subset of LSI53C10XX
Ultra-160 controllers that are based on the SYM53C8XX SCRIPTS
@@ -928,7 +928,7 @@ config SCSI_SYM53C8XX_DMA_ADDRESSING_MODE
int "DMA addressing mode"
depends on SCSI_SYM53C8XX_2
default "1"
- ---help---
+ help
This option only applies to PCI-SCSI chips that are PCI DAC
capable (875A, 895A, 896, 1010-33, 1010-66, 1000).
@@ -984,7 +984,7 @@ config SCSI_IPR
select FW_LOADER
select IRQ_POLL
select SGL_ALLOC
- ---help---
+ help
This driver supports the IBM Power Linux family RAID adapters.
This includes IBM pSeries 5712, 5703, 5709, and 570A, as well
as IBM iSeries 5702, 5703, 5709, and 570A.
@@ -1022,7 +1022,7 @@ config SCSI_NCR53C8XX_DEFAULT_TAGS
int "default tagged command queue depth"
depends on SCSI_ZALON
default "8"
- ---help---
+ help
"Tagged command queuing" is a feature of SCSI-2 which improves
performance: the host adapter can send several SCSI commands to a
device's queue even if previous commands haven't finished yet.
@@ -1048,7 +1048,7 @@ config SCSI_NCR53C8XX_MAX_TAGS
int "maximum number of queued commands"
depends on SCSI_ZALON
default "32"
- ---help---
+ help
This option allows you to specify the maximum number of commands
that can be queued to any device, when tagged command queuing is
possible. The default value is 32. Minimum is 2, maximum is 64.
@@ -1065,7 +1065,7 @@ config SCSI_NCR53C8XX_SYNC
int "synchronous transfers frequency in MHz"
depends on SCSI_ZALON
default "20"
- ---help---
+ help
The SCSI Parallel Interface-2 Standard defines 5 classes of transfer
rates: FAST-5, FAST-10, FAST-20, FAST-40 and FAST-80. The numbers
are respectively the maximum data transfer rates in mega-transfers
@@ -1108,7 +1108,7 @@ config SCSI_NCR53C8XX_NO_DISCONNECT
config SCSI_QLOGIC_FAS
tristate "Qlogic FAS SCSI support"
depends on ISA && SCSI
- ---help---
+ help
This is a driver for the ISA, VLB, and PCMCIA versions of the Qlogic
FastSCSI! cards as well as any other card based on the FASXX chip
(including the Control Concepts SCSI/IDE/SIO/PIO/FDC cards).
@@ -1158,14 +1158,14 @@ config SCSI_LPFC
depends on NVME_TARGET_FC || NVME_TARGET_FC=n
depends on NVME_FC || NVME_FC=n
select CRC_T10DIF
- ---help---
+ help
This lpfc driver supports the Emulex LightPulse
Family of Fibre Channel PCI host adapters.
config SCSI_LPFC_DEBUG_FS
bool "Emulex LightPulse Fibre Channel debugfs Support"
depends on SCSI_LPFC && DEBUG_FS
- ---help---
+ help
This makes debugging information from the lpfc driver
available via the debugfs filesystem.
@@ -1173,7 +1173,7 @@ config SCSI_SIM710
tristate "Simple 53c710 SCSI support (Compaq, NCR machines)"
depends on EISA && SCSI
select SCSI_SPI_ATTRS
- ---help---
+ help
This driver is for NCR53c710 based SCSI host adapters.
It currently supports Compaq EISA cards.
@@ -1181,7 +1181,7 @@ config SCSI_SIM710
config SCSI_DC395x
tristate "Tekram DC395(U/UW/F) and DC315(U) SCSI support"
depends on PCI && SCSI
- ---help---
+ help
This driver supports PCI SCSI host adapters based on the ASIC
TRM-S1040 chip, e.g Tekram DC395(U/UW/F) and DC315(U) variants.
@@ -1197,7 +1197,7 @@ config SCSI_AM53C974
tristate "Tekram DC390(T) and Am53/79C974 SCSI support (new driver)"
depends on PCI && SCSI
select SCSI_SPI_ATTRS
- ---help---
+ help
This driver supports PCI SCSI host adapters based on the Am53C974A
chip, e.g. Tekram DC390(T), DawiControl 2974 and some onboard
PCscsi/PCnet (Am53/79C974) solutions.
@@ -1224,7 +1224,7 @@ config SCSI_WD719X
tristate "Western Digital WD7193/7197/7296 support"
depends on PCI && SCSI
select EEPROM_93CX6
- ---help---
+ help
This is a driver for Western Digital WD7193, WD7197 and WD7296 PCI
SCSI controllers (based on WD33C296A chip).
@@ -1318,7 +1318,7 @@ config A2091_SCSI
config GVP11_SCSI
tristate "GVP Series II WD33C93A support"
depends on ZORRO && SCSI
- ---help---
+ help
If you have a Great Valley Products Series II SCSI controller,
answer Y. Also say Y if you have a later model of GVP SCSI
controller (such as the GVP A4008 or a Combo board). Otherwise,
@@ -1374,7 +1374,7 @@ config ATARI_SCSI
tristate "Atari native SCSI support"
depends on ATARI && SCSI
select SCSI_SPI_ATTRS
- ---help---
+ help
If you have an Atari with built-in NCR5380 SCSI controller (TT,
Falcon, ...) say Y to get it supported. Of course also, if you have
a compatible SCSI controller (e.g. for Medusa).
@@ -1486,7 +1486,7 @@ config SCSI_PMCRAID
tristate "PMC SIERRA Linux MaxRAID adapter support"
depends on PCI && SCSI && NET
select SGL_ALLOC
- ---help---
+ help
This driver supports the PMC SIERRA MaxRAID adapters.
config SCSI_PM8001
diff --git a/drivers/scsi/aic7xxx/Kconfig.aic79xx b/drivers/scsi/aic7xxx/Kconfig.aic79xx
index d4c50b8fce29..a47dbd500e9a 100644
--- a/drivers/scsi/aic7xxx/Kconfig.aic79xx
+++ b/drivers/scsi/aic7xxx/Kconfig.aic79xx
@@ -15,7 +15,7 @@ config AIC79XX_CMDS_PER_DEVICE
int "Maximum number of TCQ commands per device"
depends on SCSI_AIC79XX
default "32"
- ---help---
+ help
Specify the number of commands you would like to allocate per SCSI
device when Tagged Command Queueing (TCQ) is enabled on that device.
@@ -38,7 +38,7 @@ config AIC79XX_RESET_DELAY_MS
int "Initial bus reset delay in milli-seconds"
depends on SCSI_AIC79XX
default "5000"
- ---help---
+ help
The number of milliseconds to delay after an initial bus reset.
The bus settle delay following all error recovery actions is
dictated by the SCSI layer and is not affected by this value.
diff --git a/drivers/scsi/aic7xxx/Kconfig.aic7xxx b/drivers/scsi/aic7xxx/Kconfig.aic7xxx
index 9d027549d698..0cfd92ce750a 100644
--- a/drivers/scsi/aic7xxx/Kconfig.aic7xxx
+++ b/drivers/scsi/aic7xxx/Kconfig.aic7xxx
@@ -7,7 +7,7 @@ config SCSI_AIC7XXX
tristate "Adaptec AIC7xxx Fast -> U160 support"
depends on (PCI || EISA) && SCSI
select SCSI_SPI_ATTRS
- ---help---
+ help
This driver supports all of Adaptec's Fast through Ultra 160 PCI
based SCSI controllers as well as the aic7770 based EISA and VLB
SCSI controllers (the 274x and 284x series). For AAA and ARO based
@@ -20,7 +20,7 @@ config AIC7XXX_CMDS_PER_DEVICE
int "Maximum number of TCQ commands per device"
depends on SCSI_AIC7XXX
default "32"
- ---help---
+ help
Specify the number of commands you would like to allocate per SCSI
device when Tagged Command Queueing (TCQ) is enabled on that device.
@@ -43,7 +43,7 @@ config AIC7XXX_RESET_DELAY_MS
int "Initial bus reset delay in milli-seconds"
depends on SCSI_AIC7XXX
default "5000"
- ---help---
+ help
The number of milliseconds to delay after an initial bus reset.
The bus settle delay following all error recovery actions is
dictated by the SCSI layer and is not affected by this value.
diff --git a/drivers/scsi/bnx2fc/Kconfig b/drivers/scsi/bnx2fc/Kconfig
index e0ccb48ec961..3cf7e08df809 100644
--- a/drivers/scsi/bnx2fc/Kconfig
+++ b/drivers/scsi/bnx2fc/Kconfig
@@ -9,5 +9,5 @@ config SCSI_BNX2X_FCOE
select ETHERNET
select NET_VENDOR_BROADCOM
select CNIC
- ---help---
+ help
This driver supports FCoE offload for the QLogic devices.
diff --git a/drivers/scsi/bnx2i/Kconfig b/drivers/scsi/bnx2i/Kconfig
index 702dc82c9501..75ace2302fed 100644
--- a/drivers/scsi/bnx2i/Kconfig
+++ b/drivers/scsi/bnx2i/Kconfig
@@ -9,6 +9,6 @@ config SCSI_BNX2_ISCSI
select ETHERNET
select NET_VENDOR_BROADCOM
select CNIC
- ---help---
+ help
This driver supports iSCSI offload for the QLogic NetXtreme II
devices.
diff --git a/drivers/scsi/cxgbi/cxgb3i/Kconfig b/drivers/scsi/cxgbi/cxgb3i/Kconfig
index 3e4b644249cb..e20e6f3bfe64 100644
--- a/drivers/scsi/cxgbi/cxgb3i/Kconfig
+++ b/drivers/scsi/cxgbi/cxgb3i/Kconfig
@@ -8,5 +8,5 @@ config SCSI_CXGB3_ISCSI
select CHELSIO_T3
select CHELSIO_LIB
select SCSI_ISCSI_ATTRS
- ---help---
+ help
This driver supports iSCSI offload for the Chelsio T3 devices.
diff --git a/drivers/scsi/cxgbi/cxgb4i/Kconfig b/drivers/scsi/cxgbi/cxgb4i/Kconfig
index d1f1baba3285..b206e266b4e7 100644
--- a/drivers/scsi/cxgbi/cxgb4i/Kconfig
+++ b/drivers/scsi/cxgbi/cxgb4i/Kconfig
@@ -8,5 +8,5 @@ config SCSI_CXGB4_ISCSI
select CHELSIO_T4
select CHELSIO_LIB
select SCSI_ISCSI_ATTRS
- ---help---
+ help
This driver supports iSCSI offload for the Chelsio T4 devices.
diff --git a/drivers/scsi/esas2r/Kconfig b/drivers/scsi/esas2r/Kconfig
index 19f6d3029658..c9b43f7fce31 100644
--- a/drivers/scsi/esas2r/Kconfig
+++ b/drivers/scsi/esas2r/Kconfig
@@ -2,5 +2,5 @@
config SCSI_ESAS2R
tristate "ATTO Technology's ExpressSAS RAID adapter driver"
depends on PCI && SCSI
- ---help---
+ help
This driver supports the ATTO ExpressSAS R6xx SAS/SATA RAID controllers.
diff --git a/drivers/scsi/mpt3sas/Kconfig b/drivers/scsi/mpt3sas/Kconfig
index a072187875df..86209455172d 100644
--- a/drivers/scsi/mpt3sas/Kconfig
+++ b/drivers/scsi/mpt3sas/Kconfig
@@ -46,7 +46,7 @@ config SCSI_MPT3SAS
select SCSI_SAS_ATTRS
select RAID_ATTRS
select IRQ_POLL
- ---help---
+ help
This driver supports PCI-Express SAS 12Gb/s Host Adapters.
config SCSI_MPT2SAS_MAX_SGE
@@ -54,7 +54,7 @@ config SCSI_MPT2SAS_MAX_SGE
depends on PCI && SCSI && SCSI_MPT3SAS
default "128"
range 16 256
- ---help---
+ help
This option allows you to specify the maximum number of scatter-
gather entries per I/O. The driver default is 128, which matches
MAX_PHYS_SEGMENTS in most kernels. However in SuSE kernels this
@@ -66,7 +66,7 @@ config SCSI_MPT3SAS_MAX_SGE
depends on PCI && SCSI && SCSI_MPT3SAS
default "128"
range 16 256
- ---help---
+ help
This option allows you to specify the maximum number of scatter-
gather entries per I/O. The driver default is 128, which matches
MAX_PHYS_SEGMENTS in most kernels. However in SuSE kernels this
@@ -78,6 +78,6 @@ config SCSI_MPT2SAS
default n
select SCSI_MPT3SAS
depends on PCI && SCSI
- ---help---
+ help
Dummy config option for backwards compatiblity: configure the MPT3SAS
driver instead.
diff --git a/drivers/scsi/qedf/Kconfig b/drivers/scsi/qedf/Kconfig
index 7cd993be4e57..eb81a1b0374a 100644
--- a/drivers/scsi/qedf/Kconfig
+++ b/drivers/scsi/qedf/Kconfig
@@ -7,6 +7,6 @@ config QEDF
depends on LIBFCOE
select QED_LL2
select QED_FCOE
- ---help---
+ help
This driver supports FCoE offload for the QLogic FastLinQ
41000 Series Converged Network Adapters.
diff --git a/drivers/scsi/qedi/Kconfig b/drivers/scsi/qedi/Kconfig
index 7ab07f3b453f..2091d883a584 100644
--- a/drivers/scsi/qedi/Kconfig
+++ b/drivers/scsi/qedi/Kconfig
@@ -8,6 +8,6 @@ config QEDI
select QED_OOO
select QED_ISCSI
select ISCSI_BOOT_SYSFS
- ---help---
+ help
This driver supports iSCSI offload for the QLogic FastLinQ
41000 Series Converged Network Adapters.
diff --git a/drivers/scsi/qla2xxx/Kconfig b/drivers/scsi/qla2xxx/Kconfig
index 764501838e21..802c373fd6d9 100644
--- a/drivers/scsi/qla2xxx/Kconfig
+++ b/drivers/scsi/qla2xxx/Kconfig
@@ -6,7 +6,7 @@ config SCSI_QLA_FC
depends on NVME_FC || !NVME_FC
select FW_LOADER
select BTREE
- ---help---
+ help
This qla2xxx driver supports all QLogic Fibre Channel
PCI and PCIe host adapters.
@@ -37,14 +37,14 @@ config TCM_QLA2XXX
depends on LIBFC
select BTREE
default n
- ---help---
+ help
Say Y here to enable the TCM_QLA2XXX fabric module for QLogic 24xx+ series target mode HBAs
if TCM_QLA2XXX
config TCM_QLA2XXX_DEBUG
bool "TCM_QLA2XXX fabric module DEBUG mode for QLogic 24xx+ series target mode HBAs"
default n
- ---help---
+ help
Say Y here to enable the TCM_QLA2XXX fabric module DEBUG for QLogic 24xx+ series target mode HBAs
This will include code to enable the SCSI command jammer
endif
diff --git a/drivers/scsi/qla4xxx/Kconfig b/drivers/scsi/qla4xxx/Kconfig
index 4bdf31b1407a..2fa249db6656 100644
--- a/drivers/scsi/qla4xxx/Kconfig
+++ b/drivers/scsi/qla4xxx/Kconfig
@@ -4,6 +4,6 @@ config SCSI_QLA_ISCSI
depends on PCI && SCSI && NET
select SCSI_ISCSI_ATTRS
select ISCSI_BOOT_SYSFS
- ---help---
+ help
This driver supports the QLogic 40xx (ISP4XXX), 8022 (ISP82XX)
and 8032 (ISP83XX) iSCSI host adapter family.
diff --git a/drivers/scsi/smartpqi/Kconfig b/drivers/scsi/smartpqi/Kconfig
index d3311c014863..8eec241f074b 100644
--- a/drivers/scsi/smartpqi/Kconfig
+++ b/drivers/scsi/smartpqi/Kconfig
@@ -42,7 +42,7 @@ config SCSI_SMARTPQI
depends on PCI && SCSI && !S390
select SCSI_SAS_ATTRS
select RAID_ATTRS
- ---help---
+ help
This driver supports Microsemi PQI controllers.
<http://www.microsemi.com>
diff --git a/drivers/scsi/ufs/Kconfig b/drivers/scsi/ufs/Kconfig
index e2005aeddc2d..d35378be89e8 100644
--- a/drivers/scsi/ufs/Kconfig
+++ b/drivers/scsi/ufs/Kconfig
@@ -38,7 +38,7 @@ config SCSI_UFSHCD
select PM_DEVFREQ
select DEVFREQ_GOV_SIMPLE_ONDEMAND
select NLS
- ---help---
+ help
This selects the support for UFS devices in Linux, say Y and make
sure that you know the name of your UFS host adapter (the card
inside your computer that "speaks" the UFS protocol, also
@@ -53,7 +53,7 @@ config SCSI_UFSHCD
config SCSI_UFSHCD_PCI
tristate "PCI bus based UFS Controller support"
depends on SCSI_UFSHCD && PCI
- ---help---
+ help
This selects the PCI UFS Host Controller Interface. Select this if
you have UFS Host Controller with PCI Interface.
@@ -64,7 +64,7 @@ config SCSI_UFSHCD_PCI
config SCSI_UFS_DWC_TC_PCI
tristate "DesignWare pci support using a G210 Test Chip"
depends on SCSI_UFSHCD_PCI
- ---help---
+ help
Synopsys Test Chip is a PHY for prototyping purposes.
If unsure, say N.
@@ -72,7 +72,7 @@ config SCSI_UFS_DWC_TC_PCI
config SCSI_UFSHCD_PLATFORM
tristate "Platform bus based UFS Controller support"
depends on SCSI_UFSHCD
- ---help---
+ help
This selects the UFS host controller support. Select this if
you have an UFS controller on Platform bus.
@@ -91,7 +91,7 @@ config SCSI_UFS_CDNS_PLATFORM
config SCSI_UFS_DWC_TC_PLATFORM
tristate "DesignWare platform support using a G210 Test Chip"
depends on SCSI_UFSHCD_PLATFORM
- ---help---
+ help
Synopsys Test Chip is a PHY for prototyping purposes.
If unsure, say N.
@@ -126,7 +126,7 @@ config SCSI_UFS_MEDIATEK
config SCSI_UFS_HISI
tristate "Hisilicon specific hooks to UFS controller platform driver"
depends on (ARCH_HISI || COMPILE_TEST) && SCSI_UFSHCD_PLATFORM
- ---help---
+ help
This selects the Hisilicon specific additions to UFSHCD platform driver.
Select this if you have UFS controller on Hisilicon chipset.