Merge tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC boardfile updates from Arnd Bergmann
 "Unused boardfile removal for 6.3

  This is a follow-up to the deprecation of most of the old-style board
  files that was merged in linux-6.0, removing them for good.

  This branch is almost exclusively dead code removal based on those
  annotations. Some device driver removals went through separate
  subsystem trees, but the majority is in the same branch, in order to
  better handle dependencies between the patches and avoid breaking
  bisection.

  Unfortunately that leads to merge conflicts against other changes in
  the subsystem trees, but they should all be trivial to resolve by
  removing the files.

  See commit 7d0d3fa7339e ("Merge tag 'arm-boardfiles-6.0' of
  git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") for the
  description of which machines were marked unused and are now removed.

  The only removals that got postponed are Terastation WXL (mv78xx0) and
  Jornada720 (StrongARM1100), which turned out to still have potential
  users"

* tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (91 commits)
  mmc: omap: drop TPS65010 dependency
  ARM: pxa: restore mfp-pxa320.h
  usb: ohci-omap: avoid unused-variable warning
  ARM: debug: remove references in DEBUG_UART_8250_SHIFT to removed configs
  ARM: s3c: remove obsolete s3c-cpu-freq header
  MAINTAINERS: adjust SAMSUNG SOC CLOCK DRIVERS after s3c24xx support removal
  MAINTAINERS: update file entries after arm multi-platform rework and mach-pxa removal
  ARM: remove CONFIG_UNUSED_BOARD_FILES
  mfd: remove htc-pasic3 driver
  w1: remove ds1wm driver
  usb: remove ohci-tmio driver
  fbdev: remove w100fb driver
  fbdev: remove tmiofb driver
  mmc: remove tmio_mmc driver
  mfd: remove ucb1400 support
  mfd: remove toshiba tmio drivers
  rtc: remove v3020 driver
  power: remove pda_power supply driver
  ASoC: pxa: remove unused board support
  pcmcia: remove unused pxa/sa1100 drivers
  ...

3 files changed, 1 insertions, 105 deletions

diff --git a/drivers/soc/samsung/Kconfig b/drivers/soc/samsung/Kconfig
index 02e319508cc6..7a8f291e7704 100644
--- a/drivers/soc/samsung/Kconfig
+++ b/drivers/soc/samsung/Kconfig
@@ -52,29 +52,9 @@ config EXYNOS_PM_DOMAINS
 	bool "Exynos PM domains" if COMPILE_TEST
 	depends on (ARCH_EXYNOS && PM_GENERIC_DOMAINS) || COMPILE_TEST
 
-config SAMSUNG_PM_DEBUG
-	bool "Samsung PM Suspend debug"
-	depends on PM && DEBUG_KERNEL
-	depends on PLAT_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210
-	depends on DEBUG_S3C24XX_UART || DEBUG_S3C2410_UART
-	depends on DEBUG_LL && MMU
-	help
-	  Say Y here if you want verbose debugging from the PM Suspend and
-	  Resume code. See <file:Documentation/arm/samsung-s3c24xx/suspend.rst>
-	  for more information.
-
-config S3C_PM_DEBUG_LED_SMDK
-       bool "SMDK LED suspend/resume debugging"
-       depends on PM && (MACH_SMDK6410)
-       help
-         Say Y here to enable the use of the SMDK LEDs on the baseboard
-	 for debugging of the state of the suspend and resume process.
-
-	 Note, this currently only works for S3C64XX based SMDK boards.
-
 config SAMSUNG_PM_CHECK
 	bool "S3C2410 PM Suspend Memory CRC"
-	depends on PM && (PLAT_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210)
+	depends on PM && (ARCH_S3C64XX || ARCH_S5PV210)
 	select CRC32
 	help
 	  Enable the PM code's memory area checksum over sleep. This option
@@ -85,8 +65,6 @@ config SAMSUNG_PM_CHECK
 	  Note, this can take several seconds depending on memory size
 	  and CPU speed.
 
-	  See <file:Documentation/arm/samsung-s3c24xx/suspend.rst>
-
 config SAMSUNG_PM_CHECK_CHUNKSIZE
 	int "S3C2410 PM Suspend CRC Chunksize (KiB)"
 	depends on PM && SAMSUNG_PM_CHECK
@@ -97,8 +75,6 @@ config SAMSUNG_PM_CHECK_CHUNKSIZE
 	  the CRC data block will take more memory, but will identify any
 	  faults with better precision.
 
-	  See <file:Documentation/arm/samsung-s3c24xx/suspend.rst>
-
 config EXYNOS_REGULATOR_COUPLER
 	bool "Exynos SoC Regulator Coupler" if COMPILE_TEST
 	depends on ARCH_EXYNOS || COMPILE_TEST
diff --git a/drivers/soc/samsung/Makefile b/drivers/soc/samsung/Makefile
index 9f59d1905ab0..d35270fc6b2b 100644
--- a/drivers/soc/samsung/Makefile
+++ b/drivers/soc/samsung/Makefile
@@ -14,4 +14,3 @@ obj-$(CONFIG_EXYNOS_PM_DOMAINS) += pm_domains.o
 obj-$(CONFIG_EXYNOS_REGULATOR_COUPLER) += exynos-regulator-coupler.o
 
 obj-$(CONFIG_SAMSUNG_PM_CHECK)	+= s3c-pm-check.o
-obj-$(CONFIG_SAMSUNG_PM_DEBUG)	+= s3c-pm-debug.o
diff --git a/drivers/soc/samsung/s3c-pm-debug.c b/drivers/soc/samsung/s3c-pm-debug.c
deleted file mode 100644
index b5ce0e9a41e5..000000000000
--- a/drivers/soc/samsung/s3c-pm-debug.c
+++ /dev/null
@@ -1,79 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (C) 2013 Samsung Electronics Co., Ltd.
-//	Tomasz Figa <t.figa@samsung.com>
-// Copyright (C) 2008 Openmoko, Inc.
-// Copyright (C) 2004-2008 Simtec Electronics
-//	Ben Dooks <ben@simtec.co.uk>
-//	http://armlinux.simtec.co.uk/
-//
-// Samsung common power management (suspend to RAM) debug support
-
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/io.h>
-
-#include <asm/mach/map.h>
-
-#include <linux/soc/samsung/s3c-pm.h>
-
-static struct pm_uart_save uart_save;
-
-extern void printascii(const char *);
-
-void s3c_pm_dbg(const char *fmt, ...)
-{
-	va_list va;
-	char buff[256];
-
-	va_start(va, fmt);
-	vsnprintf(buff, sizeof(buff), fmt, va);
-	va_end(va);
-
-	printascii(buff);
-}
-
-static inline void __iomem *s3c_pm_uart_base(void)
-{
-	unsigned long paddr;
-	unsigned long vaddr;
-
-	debug_ll_addr(&paddr, &vaddr);
-
-	return (void __iomem *)vaddr;
-}
-
-void s3c_pm_save_uarts(bool is_s3c2410)
-{
-	void __iomem *regs = s3c_pm_uart_base();
-	struct pm_uart_save *save = &uart_save;
-
-	save->ulcon = __raw_readl(regs + S3C2410_ULCON);
-	save->ucon = __raw_readl(regs + S3C2410_UCON);
-	save->ufcon = __raw_readl(regs + S3C2410_UFCON);
-	save->umcon = __raw_readl(regs + S3C2410_UMCON);
-	save->ubrdiv = __raw_readl(regs + S3C2410_UBRDIV);
-
-	if (!is_s3c2410)
-		save->udivslot = __raw_readl(regs + S3C2443_DIVSLOT);
-
-	S3C_PMDBG("UART[%p]: ULCON=%04x, UCON=%04x, UFCON=%04x, UBRDIV=%04x\n",
-		  regs, save->ulcon, save->ucon, save->ufcon, save->ubrdiv);
-}
-
-void s3c_pm_restore_uarts(bool is_s3c2410)
-{
-	void __iomem *regs = s3c_pm_uart_base();
-	struct pm_uart_save *save = &uart_save;
-
-	s3c_pm_arch_update_uart(regs, save);
-
-	__raw_writel(save->ulcon, regs + S3C2410_ULCON);
-	__raw_writel(save->ucon,  regs + S3C2410_UCON);
-	__raw_writel(save->ufcon, regs + S3C2410_UFCON);
-	__raw_writel(save->umcon, regs + S3C2410_UMCON);
-	__raw_writel(save->ubrdiv, regs + S3C2410_UBRDIV);
-
-	if (!is_s3c2410)
-		__raw_writel(save->udivslot, regs + S3C2443_DIVSLOT);
-}