summaryrefslogtreecommitdiff
path: root/drivers/spi/spi-bcm2835.c
diff options
context:
space:
mode:
authorLukas Wunner <lukas@wunner.de>2021-05-28 00:32:00 +0300
committerMark Brown <broonie@kernel.org>2021-06-02 14:03:39 +0300
commitec679bda639fe84b78d473526ae27c74dea383fb (patch)
tree4ae7588911e8a18b7aeffeac95c2104c2faf3349 /drivers/spi/spi-bcm2835.c
parent1a435466b0d470eb9095da0efefea5f7f69acf9c (diff)
downloadlinux-ec679bda639fe84b78d473526ae27c74dea383fb.tar.xz
spi: bcm2835: Allow arbitrary number of slaves
Since commit 571e31fa60b3 ("spi: bcm2835: Cache CS register value for ->prepare_message()"), the number of slaves has been limited by a compile-time constant. This was necessitated by statically-sized arrays in the driver private data which contain per-slave register values. As suggested by Mark, move those register values to a per-slave controller_state which is allocated on ->setup and freed on ->cleanup. The limitation on the number of slaves is thus lifted. Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: Joe Burmeister <joe.burmeister@devtank.co.uk> Cc: Phil Elwell <phil@raspberrypi.com> Link: https://lore.kernel.org/r/a847c01f09400801e74e0630bf5a0197591554da.1622150204.git.lukas@wunner.de Signed-off-by: Mark Brown <broonie@kernel.org>
Diffstat (limited to 'drivers/spi/spi-bcm2835.c')
-rw-r--r--drivers/spi/spi-bcm2835.c204
1 files changed, 119 insertions, 85 deletions
diff --git a/drivers/spi/spi-bcm2835.c b/drivers/spi/spi-bcm2835.c
index fe40626e45aa..5f8771fe1a31 100644
--- a/drivers/spi/spi-bcm2835.c
+++ b/drivers/spi/spi-bcm2835.c
@@ -68,7 +68,6 @@
#define BCM2835_SPI_FIFO_SIZE 64
#define BCM2835_SPI_FIFO_SIZE_3_4 48
#define BCM2835_SPI_DMA_MIN_LENGTH 96
-#define BCM2835_SPI_NUM_CS 24 /* raise as necessary */
#define BCM2835_SPI_MODE_BITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH \
| SPI_NO_CS | SPI_3WIRE)
@@ -96,8 +95,6 @@ MODULE_PARM_DESC(polling_limit_us,
* @rx_prologue: bytes received without DMA if first RX sglist entry's
* length is not a multiple of 4 (to overcome hardware limitation)
* @tx_spillover: whether @tx_prologue spills over to second TX sglist entry
- * @prepare_cs: precalculated CS register value for ->prepare_message()
- * (uses slave-specific clock polarity and phase settings)
* @debugfs_dir: the debugfs directory - neede to remove debugfs when
* unloading the module
* @count_transfer_polling: count of how often polling mode is used
@@ -107,7 +104,7 @@ MODULE_PARM_DESC(polling_limit_us,
* These are counted as well in @count_transfer_polling and
* @count_transfer_irq
* @count_transfer_dma: count how often dma mode is used
- * @chip_select: SPI slave currently selected
+ * @slv: SPI slave currently selected
* (used by bcm2835_spi_dma_tx_done() to write @clear_rx_cs)
* @tx_dma_active: whether a TX DMA descriptor is in progress
* @rx_dma_active: whether a RX DMA descriptor is in progress
@@ -115,11 +112,6 @@ MODULE_PARM_DESC(polling_limit_us,
* @fill_tx_desc: preallocated TX DMA descriptor used for RX-only transfers
* (cyclically copies from zero page to TX FIFO)
* @fill_tx_addr: bus address of zero page
- * @clear_rx_desc: preallocated RX DMA descriptor used for TX-only transfers
- * (cyclically clears RX FIFO by writing @clear_rx_cs to CS register)
- * @clear_rx_addr: bus address of @clear_rx_cs
- * @clear_rx_cs: precalculated CS register value to clear RX FIFO
- * (uses slave-specific clock polarity and phase settings)
*/
struct bcm2835_spi {
void __iomem *regs;
@@ -134,7 +126,6 @@ struct bcm2835_spi {
int tx_prologue;
int rx_prologue;
unsigned int tx_spillover;
- u32 prepare_cs[BCM2835_SPI_NUM_CS];
struct dentry *debugfs_dir;
u64 count_transfer_polling;
@@ -142,14 +133,28 @@ struct bcm2835_spi {
u64 count_transfer_irq_after_polling;
u64 count_transfer_dma;
- u8 chip_select;
+ struct bcm2835_spidev *slv;
unsigned int tx_dma_active;
unsigned int rx_dma_active;
struct dma_async_tx_descriptor *fill_tx_desc;
dma_addr_t fill_tx_addr;
- struct dma_async_tx_descriptor *clear_rx_desc[BCM2835_SPI_NUM_CS];
+};
+
+/**
+ * struct bcm2835_spidev - BCM2835 SPI slave
+ * @prepare_cs: precalculated CS register value for ->prepare_message()
+ * (uses slave-specific clock polarity and phase settings)
+ * @clear_rx_desc: preallocated RX DMA descriptor used for TX-only transfers
+ * (cyclically clears RX FIFO by writing @clear_rx_cs to CS register)
+ * @clear_rx_addr: bus address of @clear_rx_cs
+ * @clear_rx_cs: precalculated CS register value to clear RX FIFO
+ * (uses slave-specific clock polarity and phase settings)
+ */
+struct bcm2835_spidev {
+ u32 prepare_cs;
+ struct dma_async_tx_descriptor *clear_rx_desc;
dma_addr_t clear_rx_addr;
- u32 clear_rx_cs[BCM2835_SPI_NUM_CS] ____cacheline_aligned;
+ u32 clear_rx_cs ____cacheline_aligned;
};
#if defined(CONFIG_DEBUG_FS)
@@ -624,8 +629,7 @@ static void bcm2835_spi_dma_tx_done(void *data)
/* busy-wait for TX FIFO to empty */
while (!(bcm2835_rd(bs, BCM2835_SPI_CS) & BCM2835_SPI_CS_DONE))
- bcm2835_wr(bs, BCM2835_SPI_CS,
- bs->clear_rx_cs[bs->chip_select]);
+ bcm2835_wr(bs, BCM2835_SPI_CS, bs->slv->clear_rx_cs);
bs->tx_dma_active = false;
smp_wmb();
@@ -646,18 +650,18 @@ static void bcm2835_spi_dma_tx_done(void *data)
/**
* bcm2835_spi_prepare_sg() - prepare and submit DMA descriptor for sglist
* @ctlr: SPI master controller
- * @spi: SPI slave
* @tfr: SPI transfer
* @bs: BCM2835 SPI controller
+ * @slv: BCM2835 SPI slave
* @is_tx: whether to submit DMA descriptor for TX or RX sglist
*
* Prepare and submit a DMA descriptor for the TX or RX sglist of @tfr.
* Return 0 on success or a negative error number.
*/
static int bcm2835_spi_prepare_sg(struct spi_controller *ctlr,
- struct spi_device *spi,
struct spi_transfer *tfr,
struct bcm2835_spi *bs,
+ struct bcm2835_spidev *slv,
bool is_tx)
{
struct dma_chan *chan;
@@ -697,7 +701,7 @@ static int bcm2835_spi_prepare_sg(struct spi_controller *ctlr,
} else if (!tfr->rx_buf) {
desc->callback = bcm2835_spi_dma_tx_done;
desc->callback_param = ctlr;
- bs->chip_select = spi->chip_select;
+ bs->slv = slv;
}
/* submit it to DMA-engine */
@@ -709,8 +713,8 @@ static int bcm2835_spi_prepare_sg(struct spi_controller *ctlr,
/**
* bcm2835_spi_transfer_one_dma() - perform SPI transfer using DMA engine
* @ctlr: SPI master controller
- * @spi: SPI slave
* @tfr: SPI transfer
+ * @slv: BCM2835 SPI slave
* @cs: CS register
*
* For *bidirectional* transfers (both tx_buf and rx_buf are non-%NULL), set up
@@ -754,8 +758,8 @@ static int bcm2835_spi_prepare_sg(struct spi_controller *ctlr,
* performed at the end of an RX-only transfer.
*/
static int bcm2835_spi_transfer_one_dma(struct spi_controller *ctlr,
- struct spi_device *spi,
struct spi_transfer *tfr,
+ struct bcm2835_spidev *slv,
u32 cs)
{
struct bcm2835_spi *bs = spi_controller_get_devdata(ctlr);
@@ -773,7 +777,7 @@ static int bcm2835_spi_transfer_one_dma(struct spi_controller *ctlr,
/* setup tx-DMA */
if (bs->tx_buf) {
- ret = bcm2835_spi_prepare_sg(ctlr, spi, tfr, bs, true);
+ ret = bcm2835_spi_prepare_sg(ctlr, tfr, bs, slv, true);
} else {
cookie = dmaengine_submit(bs->fill_tx_desc);
ret = dma_submit_error(cookie);
@@ -799,9 +803,9 @@ static int bcm2835_spi_transfer_one_dma(struct spi_controller *ctlr,
* this saves 10us or more.
*/
if (bs->rx_buf) {
- ret = bcm2835_spi_prepare_sg(ctlr, spi, tfr, bs, false);
+ ret = bcm2835_spi_prepare_sg(ctlr, tfr, bs, slv, false);
} else {
- cookie = dmaengine_submit(bs->clear_rx_desc[spi->chip_select]);
+ cookie = dmaengine_submit(slv->clear_rx_desc);
ret = dma_submit_error(cookie);
}
if (ret) {
@@ -850,8 +854,6 @@ static bool bcm2835_spi_can_dma(struct spi_controller *ctlr,
static void bcm2835_dma_release(struct spi_controller *ctlr,
struct bcm2835_spi *bs)
{
- int i;
-
if (ctlr->dma_tx) {
dmaengine_terminate_sync(ctlr->dma_tx);
@@ -870,17 +872,6 @@ static void bcm2835_dma_release(struct spi_controller *ctlr,
if (ctlr->dma_rx) {
dmaengine_terminate_sync(ctlr->dma_rx);
-
- for (i = 0; i < BCM2835_SPI_NUM_CS; i++)
- if (bs->clear_rx_desc[i])
- dmaengine_desc_free(bs->clear_rx_desc[i]);
-
- if (bs->clear_rx_addr)
- dma_unmap_single(ctlr->dma_rx->device->dev,
- bs->clear_rx_addr,
- sizeof(bs->clear_rx_cs),
- DMA_TO_DEVICE);
-
dma_release_channel(ctlr->dma_rx);
ctlr->dma_rx = NULL;
}
@@ -892,7 +883,7 @@ static int bcm2835_dma_init(struct spi_controller *ctlr, struct device *dev,
struct dma_slave_config slave_config;
const __be32 *addr;
dma_addr_t dma_reg_base;
- int ret, i;
+ int ret;
/* base address in dma-space */
addr = of_get_address(ctlr->dev.of_node, 0, NULL, NULL);
@@ -972,35 +963,6 @@ static int bcm2835_dma_init(struct spi_controller *ctlr, struct device *dev,
if (ret)
goto err_config;
- bs->clear_rx_addr = dma_map_single(ctlr->dma_rx->device->dev,
- bs->clear_rx_cs,
- sizeof(bs->clear_rx_cs),
- DMA_TO_DEVICE);
- if (dma_mapping_error(ctlr->dma_rx->device->dev, bs->clear_rx_addr)) {
- dev_err(dev, "cannot map clear_rx_cs - not using DMA mode\n");
- bs->clear_rx_addr = 0;
- ret = -ENOMEM;
- goto err_release;
- }
-
- for (i = 0; i < BCM2835_SPI_NUM_CS; i++) {
- bs->clear_rx_desc[i] = dmaengine_prep_dma_cyclic(ctlr->dma_rx,
- bs->clear_rx_addr + i * sizeof(u32),
- sizeof(u32), 0,
- DMA_MEM_TO_DEV, 0);
- if (!bs->clear_rx_desc[i]) {
- dev_err(dev, "cannot prepare clear_rx_desc - not using DMA mode\n");
- ret = -ENOMEM;
- goto err_release;
- }
-
- ret = dmaengine_desc_set_reuse(bs->clear_rx_desc[i]);
- if (ret) {
- dev_err(dev, "cannot reuse clear_rx_desc - not using DMA mode\n");
- goto err_release;
- }
- }
-
/* all went well, so set can_dma */
ctlr->can_dma = bcm2835_spi_can_dma;
@@ -1082,9 +1044,10 @@ static int bcm2835_spi_transfer_one(struct spi_controller *ctlr,
struct spi_transfer *tfr)
{
struct bcm2835_spi *bs = spi_controller_get_devdata(ctlr);
+ struct bcm2835_spidev *slv = spi_get_ctldata(spi);
unsigned long spi_hz, clk_hz, cdiv;
unsigned long hz_per_byte, byte_limit;
- u32 cs = bs->prepare_cs[spi->chip_select];
+ u32 cs = slv->prepare_cs;
/* set clock */
spi_hz = tfr->speed_hz;
@@ -1133,7 +1096,7 @@ static int bcm2835_spi_transfer_one(struct spi_controller *ctlr,
* this 1 idle clock cycle pattern but runs the spi clock without gaps
*/
if (ctlr->can_dma && bcm2835_spi_can_dma(ctlr, spi, tfr))
- return bcm2835_spi_transfer_one_dma(ctlr, spi, tfr, cs);
+ return bcm2835_spi_transfer_one_dma(ctlr, tfr, slv, cs);
/* run in interrupt-mode */
return bcm2835_spi_transfer_one_irq(ctlr, spi, tfr, cs, true);
@@ -1144,6 +1107,7 @@ static int bcm2835_spi_prepare_message(struct spi_controller *ctlr,
{
struct spi_device *spi = msg->spi;
struct bcm2835_spi *bs = spi_controller_get_devdata(ctlr);
+ struct bcm2835_spidev *slv = spi_get_ctldata(spi);
int ret;
if (ctlr->can_dma) {
@@ -1162,7 +1126,7 @@ static int bcm2835_spi_prepare_message(struct spi_controller *ctlr,
* Set up clock polarity before spi_transfer_one_message() asserts
* chip select to avoid a gratuitous clock signal edge.
*/
- bcm2835_wr(bs, BCM2835_SPI_CS, bs->prepare_cs[spi->chip_select]);
+ bcm2835_wr(bs, BCM2835_SPI_CS, slv->prepare_cs);
return 0;
}
@@ -1188,17 +1152,81 @@ static int chip_match_name(struct gpio_chip *chip, void *data)
return !strcmp(chip->label, data);
}
+static void bcm2835_spi_cleanup(struct spi_device *spi)
+{
+ struct bcm2835_spidev *slv = spi_get_ctldata(spi);
+ struct spi_controller *ctlr = spi->controller;
+
+ if (slv->clear_rx_desc)
+ dmaengine_desc_free(slv->clear_rx_desc);
+
+ if (slv->clear_rx_addr)
+ dma_unmap_single(ctlr->dma_rx->device->dev,
+ slv->clear_rx_addr,
+ sizeof(u32),
+ DMA_TO_DEVICE);
+
+ kfree(slv);
+}
+
+static int bcm2835_spi_setup_dma(struct spi_controller *ctlr,
+ struct spi_device *spi,
+ struct bcm2835_spi *bs,
+ struct bcm2835_spidev *slv)
+{
+ int ret;
+
+ if (!ctlr->dma_rx)
+ return 0;
+
+ slv->clear_rx_addr = dma_map_single(ctlr->dma_rx->device->dev,
+ &slv->clear_rx_cs,
+ sizeof(u32),
+ DMA_TO_DEVICE);
+ if (dma_mapping_error(ctlr->dma_rx->device->dev, slv->clear_rx_addr)) {
+ dev_err(&spi->dev, "cannot map clear_rx_cs\n");
+ slv->clear_rx_addr = 0;
+ return -ENOMEM;
+ }
+
+ slv->clear_rx_desc = dmaengine_prep_dma_cyclic(ctlr->dma_rx,
+ slv->clear_rx_addr,
+ sizeof(u32), 0,
+ DMA_MEM_TO_DEV, 0);
+ if (!slv->clear_rx_desc) {
+ dev_err(&spi->dev, "cannot prepare clear_rx_desc\n");
+ return -ENOMEM;
+ }
+
+ ret = dmaengine_desc_set_reuse(slv->clear_rx_desc);
+ if (ret) {
+ dev_err(&spi->dev, "cannot reuse clear_rx_desc\n");
+ return ret;
+ }
+
+ return 0;
+}
+
static int bcm2835_spi_setup(struct spi_device *spi)
{
struct spi_controller *ctlr = spi->controller;
struct bcm2835_spi *bs = spi_controller_get_devdata(ctlr);
+ struct bcm2835_spidev *slv = spi_get_ctldata(spi);
struct gpio_chip *chip;
+ int ret;
u32 cs;
- if (spi->chip_select >= BCM2835_SPI_NUM_CS) {
- dev_err(&spi->dev, "only %d chip-selects supported\n",
- BCM2835_SPI_NUM_CS - 1);
- return -EINVAL;
+ if (!slv) {
+ slv = kzalloc(ALIGN(sizeof(*slv), dma_get_cache_alignment()),
+ GFP_KERNEL);
+ if (!slv)
+ return -ENOMEM;
+
+ spi_set_ctldata(spi, slv);
+
+ ret = bcm2835_spi_setup_dma(ctlr, spi, bs, slv);
+ if (ret)
+ goto err_cleanup;
}
/*
@@ -1212,20 +1240,19 @@ static int bcm2835_spi_setup(struct spi_device *spi)
cs |= BCM2835_SPI_CS_CPOL;
if (spi->mode & SPI_CPHA)
cs |= BCM2835_SPI_CS_CPHA;
- bs->prepare_cs[spi->chip_select] = cs;
+ slv->prepare_cs = cs;
/*
* Precalculate SPI slave's CS register value to clear RX FIFO
* in case of a TX-only DMA transfer.
*/
if (ctlr->dma_rx) {
- bs->clear_rx_cs[spi->chip_select] = cs |
- BCM2835_SPI_CS_TA |
- BCM2835_SPI_CS_DMAEN |
- BCM2835_SPI_CS_CLEAR_RX;
+ slv->clear_rx_cs = cs | BCM2835_SPI_CS_TA |
+ BCM2835_SPI_CS_DMAEN |
+ BCM2835_SPI_CS_CLEAR_RX;
dma_sync_single_for_device(ctlr->dma_rx->device->dev,
- bs->clear_rx_addr,
- sizeof(bs->clear_rx_cs),
+ slv->clear_rx_addr,
+ sizeof(u32),
DMA_TO_DEVICE);
}
@@ -1247,7 +1274,8 @@ static int bcm2835_spi_setup(struct spi_device *spi)
*/
dev_err(&spi->dev,
"setup: only two native chip-selects are supported\n");
- return -EINVAL;
+ ret = -EINVAL;
+ goto err_cleanup;
}
/*
@@ -1268,14 +1296,20 @@ static int bcm2835_spi_setup(struct spi_device *spi)
DRV_NAME,
GPIO_LOOKUP_FLAGS_DEFAULT,
GPIOD_OUT_LOW);
- if (IS_ERR(spi->cs_gpiod))
- return PTR_ERR(spi->cs_gpiod);
+ if (IS_ERR(spi->cs_gpiod)) {
+ ret = PTR_ERR(spi->cs_gpiod);
+ goto err_cleanup;
+ }
/* and set up the "mode" and level */
dev_info(&spi->dev, "setting up native-CS%i to use GPIO\n",
spi->chip_select);
return 0;
+
+err_cleanup:
+ bcm2835_spi_cleanup(spi);
+ return ret;
}
static int bcm2835_spi_probe(struct platform_device *pdev)
@@ -1284,8 +1318,7 @@ static int bcm2835_spi_probe(struct platform_device *pdev)
struct bcm2835_spi *bs;
int err;
- ctlr = devm_spi_alloc_master(&pdev->dev, ALIGN(sizeof(*bs),
- dma_get_cache_alignment()));
+ ctlr = devm_spi_alloc_master(&pdev->dev, sizeof(*bs));
if (!ctlr)
return -ENOMEM;
@@ -1296,6 +1329,7 @@ static int bcm2835_spi_probe(struct platform_device *pdev)
ctlr->bits_per_word_mask = SPI_BPW_MASK(8);
ctlr->num_chipselect = 3;
ctlr->setup = bcm2835_spi_setup;
+ ctlr->cleanup = bcm2835_spi_cleanup;
ctlr->transfer_one = bcm2835_spi_transfer_one;
ctlr->handle_err = bcm2835_spi_handle_err;
ctlr->prepare_message = bcm2835_spi_prepare_message;