summaryrefslogtreecommitdiff
path: root/drivers/spi/spi-dw.h
diff options
context:
space:
mode:
authorMark Brown <broonie@kernel.org>2020-09-29 19:22:29 +0300
committerMark Brown <broonie@kernel.org>2020-09-29 19:22:29 +0300
commit9d3621525018dbff2795e2bab17572fd20431234 (patch)
tree26d81b6885e22f575842cc85184717c26ecff185 /drivers/spi/spi-dw.h
parentad4fe1264b396e94b78d91c49ecea425a593b28d (diff)
parent0b6bfad4cee4a3d5c49e01fa00284db4b676360e (diff)
downloadlinux-9d3621525018dbff2795e2bab17572fd20431234.tar.xz
Merge series "spi: dw: Add full Baikal-T1 SPI Controllers support" from Serge Semin <Sergey.Semin@baikalelectronics.ru>:
Originally I intended to merge a dedicated Baikal-T1 System Boot SPI Controller driver into the kernel and leave the DW APB SSI driver untouched. But after a long discussion (see the link at the bottom of the letter) Mark and Andy persuaded me to integrate what we developed there into the DW APB SSI core driver to be useful for another controllers, which may have got the same peculiarities/problems as ours: - No IRQ. - No DMA. - No GPIO CS, so a native CS is utilized. - small Tx/Rx FIFO depth. - Automatic CS assertion/de-assertion. - Slow system bus. All of them have been fixed in the framework of this patchset in some extent at least for the SPI memory operations. As I expected it wasn't that easy and the integration took that many patches as you can see from the subject. Though some of them are mere cleanups or weakly related with the subject fixes, but we just couldn't leave the code as is at some places since we were working with the DW APB SSI driver anyway. Here is what we did to fix the original DW APB SSI driver, to make it less messy. First two patches are just cleanups to simplify the DW APB SSI device initialization a bit. We suggest to discard the IRQ threshold macro as unused and use a ternary operator to initialize the set_cs callback instead of assigning-and-updating it. Then we've discovered that the n_bytes field of the driver private data is used by the DW APB SSI IRQ handler, which requires it to be initialized before the SMP memory barrier and to be visible from another CPUs. Speaking about the SMP memory barrier. Having one right after the shared resources initialization is enough and there is no point in using the spin-lock to protect the Tx/Rx buffer pointers. The protection functionality is redundant there by the driver design. (Though I have a doubt whether the SMP memory barrier is also required there because the normal IO-methods like readl/writel implies a full memory barrier. So any memory operations performed before them are supposed to be seen by devices and another CPUs. See the patch log for details of my concern.) Thirdly we've found out that there is some confusion in the IRQs masking/unmasking/clearing in the SPI-transfer procedure. Multiple interrupts are unmasked on the SPI-transfer initialization, but just TXEI is only masked back on completion. Similarly IRQ status isn't cleared on the controller reset, which actually makes the reset being not full and errors prone in the controller probe procedure. Another very important optimization is using the IO-relaxed accessors in the dw_read_io_reg()/dw_write_io_reg() methods. Since the Tx/Rx FIFO data registers are the most frequently accessible controller resource, using relaxed accessors there will significantly improve the data read/write performance. At least on Baikal-T1 SoC such modification opens up a way to have the DW APB SSI controller working with higher SPI bus speeds, than without it. Fifthly we've made an effort to cleanup the code using the SPI-device private data - chip_data. We suggest to remove the chip type from there since it isn't used and isn't implemented right anyway. Then instead of having a bus speed, clock divider, transfer mode preserved there, and recalculating the CR0 fields of the SPI-device-specific phase, polarity and frame format each time the SPI transfer is requested, we can save it in the chip_data instance. By doing so we'll make that structure finally used as it was supposed to by design (see the spi-fsl-dspi.c, spi-pl022.c, spi-pxa2xx.c drivers for examples). Sixthly instead of having the SPI-transfer specific CR0-update callback, we suggest to implement the DW APB SSI controller capabilities approach. By doing so we can now inject the vendor-specific peculiarities in different parts of the DW APB SSI core driver (which is required to implement both SPI-transfers and the SPI memory operations). This will also make the code less confusing like defining a callback in the core driver, setting it up in the glue layer, then calling it from the core driver again. Seeing the small capabilities implementation embedded in-situ is more readable than tracking the callbacks assignments. This will concern the CS-override, Keembay master setup, DW SSI-specific CR0 registers layout capabilities. Seventhly since there are going to be two types of the transfers implemented in the DW APB SSI core driver, we need a common method to set the controller configuration like, Tx/Rx-mode, bus speed, data frame size and number of data frames to read in case of the memory operations. So we just detached the corresponding code from the SPI-transfer-one method and made it to be a part of the new dw_spi_update_config() function, which is former update_cr0(). Note that the new method will be also useful for the glue drivers, which due to the hardware design need to create their own memory operations (for instance, for the dirmap-operations provided in the Baikal-T System Boot SPI controller driver). Eighthly it is the data IO procedure and IRQ-based SPI-transfer implementation refactoring. The former one will look much simpler if the buffers initial pointers and the buffers length data utilized instead of the Tx/Rx buffers start and end pointers. The later one currently lacks of valid execution at the final stage of the SPI-transfer. So if there is no data left to send, but there is still data which needs to be received, the Tx FIFO Empty IRQ will constantly happen until all of the requested inbound data is received. So we suggest to fix that by taking the Rx FIFO Empty IRQ into account. Ninthly it's potentially errors prone to enable the DW APB SSI interrupts before enabling the chip. It specifically concerns a case if for some reason the DW APB SSI IRQs handler is executed before the controller is enabled. That will cause a part of the outbound data loss. So we suggest to reverse the order. Tenthly in order to be able to pre-initialize the Tx FIFO with data and only the start the SPI memory operations we need to have any CS de-activated. We'll fulfil that requirement by explicitly clearing the CS on the SPI transfer completion and at the explicit controller reset. Then seeing all the currently available and potentially being created types of the SPI transfers need to perform the DW APB SSI controller status register check and the errors handler procedure, we've created a common method for all of them. Eleventhly if before we've mostly had a series of fixups, cleanups and refactorings, here we've finally come to the new functionality implementation. It concerns the poll-based transfer (as Baikal-T1 System Boot SPI controller lacks a dedicated IRQ lane connected) and the SPI memory operations implementation. If the former feature is pretty much straightforward (see the patch log for details), the later one is a bit tricky. It's based on the EEPROM-read (write-then-read) and the Tx-only modes of the DW APB SSI controller, which as performing the automatic data read and write let's us to implement the faster IO procedure than using the Tx-Rx-mode-based approach. Having the memory-operations implemented that way is the best thing we can currently do to provide the errors-less SPI transfers to SPI devices with native CS attached. Note the approach utilized here to develop the SPI memory operations can be also used to create the "automatic CS toggle problem"-free(ish) SPI transfers (combine SPI-message transfers into two buffers, disable interrupts, push-pull the combined data). But we don't provide a solution in the framework of this patchset. It is a matter of a dedicated one, which we currently don't intend to spend our time on. Finally at the closure of the this patchset you'll find patches, which provide the Baikal-T1-specific DW APB SSI controllers support. The SoC has got three SPI controllers. Two of them are pretty much normal DW APB SSI interfaces: with IRQ, DMA, FIFOs of 64 words depth, 4x CSs. But the third one as being a part of the Baikal-T1 System Boot Controller has got a very limited resources: no IRQ, no DMA, only a single native chip-select and Tx/Rx FIFOs with just 8 words depth available. In order to provide a transparent initial boot code execution the System Boot SPI Controller is also utilized by an vendor-specific IP-block, which exposes an SPI flash memory direct mapping interface. Please see the corresponding patch for details. Link: https://lore.kernel.org/linux-spi/20200508093621.31619-1-Sergey.Semin@baikalelectronics.ru/ [1] "LINUX KERNEL MEMORY BARRIERS", Documentation/memory-barriers.txt, Section "KERNEL I/O BARRIER EFFECTS" Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Cc: Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Lars Povlsen <lars.povlsen@microchip.com> Cc: wuxu.wu <wuxu.wu@huawei.com> Cc: Feng Tang <feng.tang@intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-spi@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Serge Semin (30): spi: dw: Discard IRQ threshold macro spi: dw: Use ternary op to init set_cs callback spi: dw: Initialize n_bytes before the memory barrier Revert: spi: spi-dw: Add lock protect dw_spi rx/tx to prevent concurrent calls spi: dw: Clear IRQ status on DW SPI controller reset spi: dw: Disable all IRQs when controller is unused spi: dw: Use relaxed IO-methods to access FIFOs spi: dw: Discard DW SSI chip type storages spi: dw: Convert CS-override to DW SPI capabilities spi: dw: Add KeemBay Master capability spi: dw: Add DWC SSI capability spi: dw: Detach SPI device specific CR0 config method spi: dw: Update SPI bus speed in a config function spi: dw: Simplify the SPI bus speed config procedure spi: dw: Update Rx sample delay in the config function spi: dw: Add DW SPI controller config structure spi: dw: Refactor data IO procedure spi: dw: Refactor IRQ-based SPI transfer procedure spi: dw: Perform IRQ setup in a dedicated function spi: dw: Unmask IRQs after enabling the chip spi: dw: Discard chip enabling on DMA setup error spi: dw: De-assert chip-select on reset spi: dw: Explicitly de-assert CS on SPI transfer completion spi: dw: Move num-of retries parameter to the header file spi: dw: Add generic DW SSI status-check method spi: dw: Add memory operations support spi: dw: Introduce max mem-ops SPI bus frequency setting spi: dw: Add poll-based SPI transfers support dt-bindings: spi: dw: Add Baikal-T1 SPI Controllers spi: dw: Add Baikal-T1 SPI Controller glue driver .../bindings/spi/snps,dw-apb-ssi.yaml | 33 +- drivers/spi/Kconfig | 29 + drivers/spi/Makefile | 1 + drivers/spi/spi-dw-bt1.c | 339 +++++++++ drivers/spi/spi-dw-core.c | 642 ++++++++++++++---- drivers/spi/spi-dw-dma.c | 16 +- drivers/spi/spi-dw-mmio.c | 36 +- drivers/spi/spi-dw.h | 85 ++- 8 files changed, 960 insertions(+), 221 deletions(-) create mode 100644 drivers/spi/spi-dw-bt1.c -- 2.27.0
Diffstat (limited to 'drivers/spi/spi-dw.h')
-rw-r--r--drivers/spi/spi-dw.h45
1 files changed, 22 insertions, 23 deletions
diff --git a/drivers/spi/spi-dw.h b/drivers/spi/spi-dw.h
index f04075413dba..f88cf5cd5b05 100644
--- a/drivers/spi/spi-dw.h
+++ b/drivers/spi/spi-dw.h
@@ -2,6 +2,7 @@
#ifndef DW_SPI_HEADER_H
#define DW_SPI_HEADER_H
+#include <linux/bits.h>
#include <linux/completion.h>
#include <linux/debugfs.h>
#include <linux/irqreturn.h>
@@ -70,6 +71,13 @@
#define DWC_SSI_CTRLR0_FRF_OFFSET 6
#define DWC_SSI_CTRLR0_DFS_OFFSET 0
+/*
+ * For Keem Bay, CTRLR0[31] is used to select controller mode.
+ * 0: SSI is slave
+ * 1: SSI is master
+ */
+#define DWC_SSI_CTRLR0_KEEMBAY_MST BIT(31)
+
/* Bit fields in SR, 7 bits */
#define SR_MASK 0x7f /* cover 7 bits */
#define SR_BUSY (1 << 0)
@@ -92,15 +100,16 @@
#define SPI_DMA_RDMAE (1 << 0)
#define SPI_DMA_TDMAE (1 << 1)
-/* TX RX interrupt level threshold, max can be 256 */
-#define SPI_INT_THRESHOLD 32
-
enum dw_ssi_type {
SSI_MOTO_SPI = 0,
SSI_TI_SSP,
SSI_NS_MICROWIRE,
};
+/* DW SPI capabilities */
+#define DW_SPI_CAP_CS_OVERRIDE BIT(0)
+#define DW_SPI_CAP_KEEMBAY_MST BIT(1)
+
struct dw_spi;
struct dw_spi_dma_ops {
int (*dma_init)(struct device *dev, struct dw_spi *dws);
@@ -114,7 +123,6 @@ struct dw_spi_dma_ops {
struct dw_spi {
struct spi_controller *master;
- enum dw_ssi_type type;
void __iomem *regs;
unsigned long paddr;
@@ -122,7 +130,8 @@ struct dw_spi {
u32 fifo_len; /* depth of the FIFO buffer */
u32 max_freq; /* max bus freq supported */
- int cs_override;
+ u32 caps; /* DW SPI capabilities */
+
u32 reg_io_width; /* DR I/O width in bytes */
u16 bus_num;
u16 num_cs; /* supported slave numbers */
@@ -134,7 +143,6 @@ struct dw_spi {
size_t len;
void *tx;
void *tx_end;
- spinlock_t buf_lock;
void *rx;
void *rx_end;
int dma_mapped;
@@ -166,29 +174,19 @@ static inline u32 dw_readl(struct dw_spi *dws, u32 offset)
return __raw_readl(dws->regs + offset);
}
-static inline u16 dw_readw(struct dw_spi *dws, u32 offset)
-{
- return __raw_readw(dws->regs + offset);
-}
-
static inline void dw_writel(struct dw_spi *dws, u32 offset, u32 val)
{
__raw_writel(val, dws->regs + offset);
}
-static inline void dw_writew(struct dw_spi *dws, u32 offset, u16 val)
-{
- __raw_writew(val, dws->regs + offset);
-}
-
static inline u32 dw_read_io_reg(struct dw_spi *dws, u32 offset)
{
switch (dws->reg_io_width) {
case 2:
- return dw_readw(dws, offset);
+ return readw_relaxed(dws->regs + offset);
case 4:
default:
- return dw_readl(dws, offset);
+ return readl_relaxed(dws->regs + offset);
}
}
@@ -196,11 +194,11 @@ static inline void dw_write_io_reg(struct dw_spi *dws, u32 offset, u32 val)
{
switch (dws->reg_io_width) {
case 2:
- dw_writew(dws, offset, val);
+ writew_relaxed(val, dws->regs + offset);
break;
case 4:
default:
- dw_writel(dws, offset, val);
+ writel_relaxed(val, dws->regs + offset);
break;
}
}
@@ -234,14 +232,15 @@ static inline void spi_umask_intr(struct dw_spi *dws, u32 mask)
}
/*
- * This does disable the SPI controller, interrupts, and re-enable the
- * controller back. Transmit and receive FIFO buffers are cleared when the
- * device is disabled.
+ * This disables the SPI controller, interrupts, clears the interrupts status,
+ * and re-enable the controller back. Transmit and receive FIFO buffers are
+ * cleared when the device is disabled.
*/
static inline void spi_reset_chip(struct dw_spi *dws)
{
spi_enable_chip(dws, 0);
spi_mask_intr(dws, 0xff);
+ dw_readl(dws, DW_SPI_ICR);
spi_enable_chip(dws, 1);
}