summaryrefslogtreecommitdiff
path: root/drivers/spi
diff options
context:
space:
mode:
authorYang Yingliang <yangyingliang@huawei.com>2023-11-28 12:30:28 +0300
committerMark Brown <broonie@kernel.org>2023-12-11 15:55:13 +0300
commit178ebb0c505b0a35edb4fb2a0e23a1f29e1db14d (patch)
tree990721b17a8374fe7f7f3760ef49399703cfce88 /drivers/spi
parent061851a0cc5dae1a992edd4d573a7dc514bb7fbe (diff)
downloadlinux-178ebb0c505b0a35edb4fb2a0e23a1f29e1db14d.tar.xz
spi: zynq-qspi: switch to use modern name
Change legacy name master/slave to modern name host/target or controller. No functional changed. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://msgid.link/r/20231128093031.3707034-24-yangyingliang@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
Diffstat (limited to 'drivers/spi')
-rw-r--r--drivers/spi/spi-zynq-qspi.c28
1 files changed, 14 insertions, 14 deletions
diff --git a/drivers/spi/spi-zynq-qspi.c b/drivers/spi/spi-zynq-qspi.c
index 0db69a2a72ff..d6325c6be3d4 100644
--- a/drivers/spi/spi-zynq-qspi.c
+++ b/drivers/spi/spi-zynq-qspi.c
@@ -54,10 +54,10 @@
#define ZYNQ_QSPI_CONFIG_MSTREN_MASK BIT(0) /* Master Mode */
/*
- * QSPI Configuration Register - Baud rate and slave select
+ * QSPI Configuration Register - Baud rate and target select
*
* These are the values used in the calculation of baud rate divisor and
- * setting the slave select.
+ * setting the target select.
*/
#define ZYNQ_QSPI_CONFIG_BAUD_DIV_MAX GENMASK(2, 0) /* Baud rate maximum */
#define ZYNQ_QSPI_CONFIG_BAUD_DIV_SHIFT 3 /* Baud rate divisor shift */
@@ -164,14 +164,14 @@ static inline void zynq_qspi_write(struct zynq_qspi *xqspi, u32 offset,
*
* The default settings of the QSPI controller's configurable parameters on
* reset are
- * - Master mode
+ * - Host mode
* - Baud rate divisor is set to 2
* - Tx threshold set to 1l Rx threshold set to 32
* - Flash memory interface mode enabled
* - Size of the word to be transferred as 8 bit
* This function performs the following actions
* - Disable and clear all the interrupts
- * - Enable manual slave select
+ * - Enable manual target select
* - Enable manual start
* - Deselect all the chip select lines
* - Set the size of the word to be transferred as 32 bit
@@ -289,7 +289,7 @@ static void zynq_qspi_txfifo_op(struct zynq_qspi *xqspi, unsigned int size)
*/
static void zynq_qspi_chipselect(struct spi_device *spi, bool assert)
{
- struct spi_controller *ctlr = spi->master;
+ struct spi_controller *ctlr = spi->controller;
struct zynq_qspi *xqspi = spi_controller_get_devdata(ctlr);
u32 config_reg;
@@ -377,7 +377,7 @@ static int zynq_qspi_config_op(struct zynq_qspi *xqspi, struct spi_device *spi)
*/
static int zynq_qspi_setup_op(struct spi_device *spi)
{
- struct spi_controller *ctlr = spi->master;
+ struct spi_controller *ctlr = spi->controller;
struct zynq_qspi *qspi = spi_controller_get_devdata(ctlr);
if (ctlr->busy)
@@ -525,7 +525,7 @@ static irqreturn_t zynq_qspi_irq(int irq, void *dev_id)
static int zynq_qspi_exec_mem_op(struct spi_mem *mem,
const struct spi_mem_op *op)
{
- struct zynq_qspi *xqspi = spi_controller_get_devdata(mem->spi->master);
+ struct zynq_qspi *xqspi = spi_controller_get_devdata(mem->spi->controller);
int err = 0, i;
u8 *tmpbuf;
@@ -637,7 +637,7 @@ static int zynq_qspi_probe(struct platform_device *pdev)
struct zynq_qspi *xqspi;
u32 num_cs;
- ctlr = spi_alloc_master(&pdev->dev, sizeof(*xqspi));
+ ctlr = spi_alloc_host(&pdev->dev, sizeof(*xqspi));
if (!ctlr)
return -ENOMEM;
@@ -647,14 +647,14 @@ static int zynq_qspi_probe(struct platform_device *pdev)
xqspi->regs = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(xqspi->regs)) {
ret = PTR_ERR(xqspi->regs);
- goto remove_master;
+ goto remove_ctlr;
}
xqspi->pclk = devm_clk_get(&pdev->dev, "pclk");
if (IS_ERR(xqspi->pclk)) {
dev_err(&pdev->dev, "pclk clock not found.\n");
ret = PTR_ERR(xqspi->pclk);
- goto remove_master;
+ goto remove_ctlr;
}
init_completion(&xqspi->data_completion);
@@ -663,13 +663,13 @@ static int zynq_qspi_probe(struct platform_device *pdev)
if (IS_ERR(xqspi->refclk)) {
dev_err(&pdev->dev, "ref_clk clock not found.\n");
ret = PTR_ERR(xqspi->refclk);
- goto remove_master;
+ goto remove_ctlr;
}
ret = clk_prepare_enable(xqspi->pclk);
if (ret) {
dev_err(&pdev->dev, "Unable to enable APB clock.\n");
- goto remove_master;
+ goto remove_ctlr;
}
ret = clk_prepare_enable(xqspi->refclk);
@@ -715,7 +715,7 @@ static int zynq_qspi_probe(struct platform_device *pdev)
ret = devm_spi_register_controller(&pdev->dev, ctlr);
if (ret) {
- dev_err(&pdev->dev, "spi_register_master failed\n");
+ dev_err(&pdev->dev, "devm_spi_register_controller failed\n");
goto clk_dis_all;
}
@@ -725,7 +725,7 @@ clk_dis_all:
clk_disable_unprepare(xqspi->refclk);
clk_dis_pclk:
clk_disable_unprepare(xqspi->pclk);
-remove_master:
+remove_ctlr:
spi_controller_put(ctlr);
return ret;