summaryrefslogtreecommitdiff
path: root/drivers/spi
diff options
context:
space:
mode:
authorLukas Wunner <lukas@wunner.de>2019-09-11 13:15:30 +0300
committerMark Brown <broonie@kernel.org>2019-09-11 17:52:33 +0300
commit1513ceee70f2bd523e025efe0c715328e1a43ffd (patch)
tree2ff32be281127e40f542b101c17dab992927394b /drivers/spi
parent8995673e6f584c2140b565d9ef20e4e4599aad7e (diff)
downloadlinux-1513ceee70f2bd523e025efe0c715328e1a43ffd.tar.xz
spi: bcm2835: Drop dma_pending flag
The BCM2835 SPI driver uses a flag to keep track of whether a DMA transfer is in progress. The flag is used to avoid terminating DMA channels multiple times if a transfer finishes orderly while simultaneously the SPI core invokes the ->handle_err() callback because the transfer took too long. However terminating DMA channels multiple times is perfectly fine, so the flag is unnecessary for this particular purpose. The flag is also used to avoid invoking bcm2835_spi_undo_prologue() multiple times under this race condition. However multiple *concurrent* invocations can no longer happen since commit 2527704d8411 ("spi: bcm2835: Synchronize with callback on DMA termination") because the ->handle_err() callback now uses the _sync() variant when terminating DMA channels. The only raison d'être of the flag is therefore that bcm2835_spi_undo_prologue() cannot cope with multiple *sequential* invocations. Achieve that by setting tx_prologue to 0 at the end of the function. Subsequent invocations thus become no-ops. With that, the dma_pending flag becomes unnecessary, so drop it. Tested-by: Nuno Sá <nuno.sa@analog.com> Tested-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Lukas Wunner <lukas@wunner.de> Acked-by: Stefan Wahren <wahrenst@gmx.net> Acked-by: Martin Sperl <kernel@martin.sperl.org> Link: https://lore.kernel.org/r/062b03b7f86af77a13ce0ec3b22e0bdbfcfba10d.1568187525.git.lukas@wunner.de Signed-off-by: Mark Brown <broonie@kernel.org>
Diffstat (limited to 'drivers/spi')
-rw-r--r--drivers/spi/spi-bcm2835.c23
1 files changed, 8 insertions, 15 deletions
diff --git a/drivers/spi/spi-bcm2835.c b/drivers/spi/spi-bcm2835.c
index fbd6d1ae4c5e..60255ac837f5 100644
--- a/drivers/spi/spi-bcm2835.c
+++ b/drivers/spi/spi-bcm2835.c
@@ -94,7 +94,6 @@ MODULE_PARM_DESC(polling_limit_us,
* @rx_prologue: bytes received without DMA if first RX sglist entry's
* length is not a multiple of 4 (to overcome hardware limitation)
* @tx_spillover: whether @tx_prologue spills over to second TX sglist entry
- * @dma_pending: whether a DMA transfer is in progress
* @debugfs_dir: the debugfs directory - neede to remove debugfs when
* unloading the module
* @count_transfer_polling: count of how often polling mode is used
@@ -117,7 +116,6 @@ struct bcm2835_spi {
int tx_prologue;
int rx_prologue;
unsigned int tx_spillover;
- unsigned int dma_pending;
struct dentry *debugfs_dir;
u64 count_transfer_polling;
@@ -541,6 +539,8 @@ static void bcm2835_spi_undo_prologue(struct bcm2835_spi *bs)
sg_dma_address(&tfr->tx_sg.sgl[1]) -= 4;
sg_dma_len(&tfr->tx_sg.sgl[1]) += 4;
}
+
+ bs->tx_prologue = 0;
}
static void bcm2835_spi_dma_done(void *data)
@@ -556,10 +556,8 @@ static void bcm2835_spi_dma_done(void *data)
* is called the tx-dma must have finished - can't get to this
* situation otherwise...
*/
- if (cmpxchg(&bs->dma_pending, true, false)) {
- dmaengine_terminate_async(ctlr->dma_tx);
- bcm2835_spi_undo_prologue(bs);
- }
+ dmaengine_terminate_async(ctlr->dma_tx);
+ bcm2835_spi_undo_prologue(bs);
/* and mark as completed */;
complete(&ctlr->xfer_completion);
@@ -634,9 +632,6 @@ static int bcm2835_spi_transfer_one_dma(struct spi_controller *ctlr,
/* start TX early */
dma_async_issue_pending(ctlr->dma_tx);
- /* mark as dma pending */
- bs->dma_pending = 1;
-
/* set the DMA length */
bcm2835_wr(bs, BCM2835_SPI_DLEN, bs->tx_len);
@@ -652,7 +647,6 @@ static int bcm2835_spi_transfer_one_dma(struct spi_controller *ctlr,
if (ret) {
/* need to reset on errors */
dmaengine_terminate_sync(ctlr->dma_tx);
- bs->dma_pending = false;
goto err_reset_hw;
}
@@ -917,11 +911,10 @@ static void bcm2835_spi_handle_err(struct spi_controller *ctlr,
struct bcm2835_spi *bs = spi_controller_get_devdata(ctlr);
/* if an error occurred and we have an active dma, then terminate */
- if (cmpxchg(&bs->dma_pending, true, false)) {
- dmaengine_terminate_sync(ctlr->dma_tx);
- dmaengine_terminate_sync(ctlr->dma_rx);
- bcm2835_spi_undo_prologue(bs);
- }
+ dmaengine_terminate_sync(ctlr->dma_tx);
+ dmaengine_terminate_sync(ctlr->dma_rx);
+ bcm2835_spi_undo_prologue(bs);
+
/* and reset */
bcm2835_spi_reset_hw(ctlr);
}