diff options
author | Ian Abbott <abbotti@mev.co.uk> | 2016-05-20 16:49:05 +0300 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2016-06-18 06:59:52 +0300 |
commit | c644a11aae6e36b6dbae425cdfa9630d2abaaa16 (patch) | |
tree | 6048d3b66bc7e9d75cb5c20e369880e6478e0051 /drivers/staging/comedi | |
parent | dc895b42871065dd2ddf162a99b083cf6892d507 (diff) | |
download | linux-c644a11aae6e36b6dbae425cdfa9630d2abaaa16.tar.xz |
staging: comedi: drivers: rename PLX PCI 9080 register offsets
Rename the macros in "plx9080.h" that define the offsets of registers,
following the pattern `PLX_REG_<NAME>`, where `<NAME>` is the register
name from the PLX PCI 9080 Data Book.
Add defines for the "Mailbox" registers, and add parameterized macros
for the mailbox registers and the DMA control registers. Make use of
the parameterized versions of the macros where it seems appropriate.
The registers for supporting the I2O (Intelligent Input/Output) feature
are largely left undefined, just defining enough to allow the I2O
feature to be disabled.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/staging/comedi')
-rw-r--r-- | drivers/staging/comedi/drivers/cb_pcidas64.c | 96 | ||||
-rw-r--r-- | drivers/staging/comedi/drivers/gsc_hpdi.c | 39 | ||||
-rw-r--r-- | drivers/staging/comedi/drivers/plx9080.h | 177 | ||||
-rw-r--r-- | drivers/staging/comedi/drivers/rtd520.c | 4 |
4 files changed, 185 insertions, 131 deletions
diff --git a/drivers/staging/comedi/drivers/cb_pcidas64.c b/drivers/staging/comedi/drivers/cb_pcidas64.c index c773b8ca6599..d9468db6b51e 100644 --- a/drivers/staging/comedi/drivers/cb_pcidas64.c +++ b/drivers/staging/comedi/drivers/cb_pcidas64.c @@ -1238,7 +1238,7 @@ static void disable_plx_interrupts(struct comedi_device *dev) devpriv->plx_intcsr_bits = 0; writel(devpriv->plx_intcsr_bits, - devpriv->plx9080_iobase + PLX_INTRCS_REG); + devpriv->plx9080_iobase + PLX_REG_INTCSR); } static void disable_ai_interrupts(struct comedi_device *dev) @@ -1291,14 +1291,14 @@ static void init_plx9080(struct comedi_device *dev) void __iomem *plx_iobase = devpriv->plx9080_iobase; devpriv->plx_control_bits = - readl(devpriv->plx9080_iobase + PLX_CONTROL_REG); + readl(devpriv->plx9080_iobase + PLX_REG_CNTRL); #ifdef __BIG_ENDIAN bits = BIGEND_DMA0 | BIGEND_DMA1; #else bits = 0; #endif - writel(bits, devpriv->plx9080_iobase + PLX_BIGEND_REG); + writel(bits, devpriv->plx9080_iobase + PLX_REG_BIGEND); disable_plx_interrupts(dev); @@ -1330,16 +1330,16 @@ static void init_plx9080(struct comedi_device *dev) bits |= PLX_LOCAL_BUS_32_WIDE_BITS; else /* localspace0 bus is 16 bits wide */ bits |= PLX_LOCAL_BUS_16_WIDE_BITS; - writel(bits, plx_iobase + PLX_DMA1_MODE_REG); + writel(bits, plx_iobase + PLX_REG_DMAMODE1); if (ao_cmd_is_supported(board)) - writel(bits, plx_iobase + PLX_DMA0_MODE_REG); + writel(bits, plx_iobase + PLX_REG_DMAMODE0); /* enable interrupts on plx 9080 */ devpriv->plx_intcsr_bits |= ICS_AERR | ICS_PERR | ICS_PIE | ICS_PLIE | ICS_PAIE | ICS_LIE | ICS_DMA0_E | ICS_DMA1_E; writel(devpriv->plx_intcsr_bits, - devpriv->plx9080_iobase + PLX_INTRCS_REG); + devpriv->plx9080_iobase + PLX_REG_INTCSR); } static void disable_ai_pacing(struct comedi_device *dev) @@ -1615,7 +1615,7 @@ static void i2c_set_sda(struct comedi_device *dev, int state) struct pcidas64_private *devpriv = dev->private; static const int data_bit = CTL_EE_W; void __iomem *plx_control_addr = devpriv->plx9080_iobase + - PLX_CONTROL_REG; + PLX_REG_CNTRL; if (state) { /* set data line high */ @@ -1636,7 +1636,7 @@ static void i2c_set_scl(struct comedi_device *dev, int state) struct pcidas64_private *devpriv = dev->private; static const int clock_bit = CTL_USERO; void __iomem *plx_control_addr = devpriv->plx9080_iobase + - PLX_CONTROL_REG; + PLX_REG_CNTRL; if (state) { /* set clock line high */ @@ -2367,14 +2367,8 @@ static inline void dma_start_sync(struct comedi_device *dev, /* spinlock for plx dma control/status reg */ spin_lock_irqsave(&dev->spinlock, flags); - if (channel) - writeb(PLX_DMA_EN_BIT | PLX_DMA_START_BIT | - PLX_CLEAR_DMA_INTR_BIT, - devpriv->plx9080_iobase + PLX_DMA1_CS_REG); - else - writeb(PLX_DMA_EN_BIT | PLX_DMA_START_BIT | - PLX_CLEAR_DMA_INTR_BIT, - devpriv->plx9080_iobase + PLX_DMA0_CS_REG); + writeb(PLX_DMA_EN_BIT | PLX_DMA_START_BIT | PLX_CLEAR_DMA_INTR_BIT, + devpriv->plx9080_iobase + PLX_REG_DMACSR(channel)); spin_unlock_irqrestore(&dev->spinlock, flags); } @@ -2552,21 +2546,17 @@ static inline void load_first_dma_descriptor(struct comedi_device *dev, * block. Initializing them to zero seems to fix the problem. */ if (dma_channel) { - writel(0, - devpriv->plx9080_iobase + PLX_DMA1_TRANSFER_SIZE_REG); - writel(0, devpriv->plx9080_iobase + PLX_DMA1_PCI_ADDRESS_REG); - writel(0, - devpriv->plx9080_iobase + PLX_DMA1_LOCAL_ADDRESS_REG); + writel(0, devpriv->plx9080_iobase + PLX_REG_DMASIZ1); + writel(0, devpriv->plx9080_iobase + PLX_REG_DMAPADR1); + writel(0, devpriv->plx9080_iobase + PLX_REG_DMALADR1); writel(descriptor_bits, - devpriv->plx9080_iobase + PLX_DMA1_DESCRIPTOR_REG); + devpriv->plx9080_iobase + PLX_REG_DMADPR1); } else { - writel(0, - devpriv->plx9080_iobase + PLX_DMA0_TRANSFER_SIZE_REG); - writel(0, devpriv->plx9080_iobase + PLX_DMA0_PCI_ADDRESS_REG); - writel(0, - devpriv->plx9080_iobase + PLX_DMA0_LOCAL_ADDRESS_REG); + writel(0, devpriv->plx9080_iobase + PLX_REG_DMASIZ0); + writel(0, devpriv->plx9080_iobase + PLX_REG_DMAPADR0); + writel(0, devpriv->plx9080_iobase + PLX_REG_DMALADR0); writel(descriptor_bits, - devpriv->plx9080_iobase + PLX_DMA0_DESCRIPTOR_REG); + devpriv->plx9080_iobase + PLX_REG_DMADPR0); } } @@ -2803,12 +2793,7 @@ static void drain_dma_buffers(struct comedi_device *dev, unsigned int channel) int num_samples = 0; void __iomem *pci_addr_reg; - if (channel) - pci_addr_reg = - devpriv->plx9080_iobase + PLX_DMA1_PCI_ADDRESS_REG; - else - pci_addr_reg = - devpriv->plx9080_iobase + PLX_DMA0_PCI_ADDRESS_REG; + pci_addr_reg = devpriv->plx9080_iobase + PLX_REG_DMAPADR(channel); /* loop until we have read all the full buffers */ for (j = 0, next_transfer_addr = readl(pci_addr_reg); @@ -2850,10 +2835,10 @@ static void handle_ai_interrupt(struct comedi_device *dev, } /* spin lock makes sure no one else changes plx dma control reg */ spin_lock_irqsave(&dev->spinlock, flags); - dma1_status = readb(devpriv->plx9080_iobase + PLX_DMA1_CS_REG); + dma1_status = readb(devpriv->plx9080_iobase + PLX_REG_DMACSR1); if (plx_status & ICS_DMA1_A) { /* dma chan 1 interrupt */ writeb((dma1_status & PLX_DMA_EN_BIT) | PLX_CLEAR_DMA_INTR_BIT, - devpriv->plx9080_iobase + PLX_DMA1_CS_REG); + devpriv->plx9080_iobase + PLX_REG_DMACSR1); if (dma1_status & PLX_DMA_EN_BIT) drain_dma_buffers(dev, 1); @@ -2902,12 +2887,12 @@ static int last_ao_dma_load_completed(struct comedi_device *dev) unsigned short dma_status; buffer_index = prev_ao_dma_index(dev); - dma_status = readb(devpriv->plx9080_iobase + PLX_DMA0_CS_REG); + dma_status = readb(devpriv->plx9080_iobase + PLX_REG_DMACSR0); if ((dma_status & PLX_DMA_DONE_BIT) == 0) return 0; transfer_address = - readl(devpriv->plx9080_iobase + PLX_DMA0_PCI_ADDRESS_REG); + readl(devpriv->plx9080_iobase + PLX_REG_DMAPADR0); if (transfer_address != devpriv->ao_buffer_bus_addr[buffer_index]) return 0; @@ -2931,8 +2916,7 @@ static void restart_ao_dma(struct comedi_device *dev) struct pcidas64_private *devpriv = dev->private; unsigned int dma_desc_bits; - dma_desc_bits = - readl(devpriv->plx9080_iobase + PLX_DMA0_DESCRIPTOR_REG); + dma_desc_bits = readl(devpriv->plx9080_iobase + PLX_REG_DMADPR0); dma_desc_bits &= ~PLX_END_OF_CHAIN_BIT; load_first_dma_descriptor(dev, 0, dma_desc_bits); @@ -2994,8 +2978,7 @@ static void load_ao_dma(struct comedi_device *dev, const struct comedi_cmd *cmd) struct pcidas64_private *devpriv = dev->private; unsigned int num_bytes; unsigned int next_transfer_addr; - void __iomem *pci_addr_reg = - devpriv->plx9080_iobase + PLX_DMA0_PCI_ADDRESS_REG; + void __iomem *pci_addr_reg = devpriv->plx9080_iobase + PLX_REG_DMAPADR0; unsigned int buffer_index; do { @@ -3030,15 +3013,16 @@ static void handle_ao_interrupt(struct comedi_device *dev, /* spin lock makes sure no one else changes plx dma control reg */ spin_lock_irqsave(&dev->spinlock, flags); - dma0_status = readb(devpriv->plx9080_iobase + PLX_DMA0_CS_REG); + dma0_status = readb(devpriv->plx9080_iobase + PLX_REG_DMACSR0); if (plx_status & ICS_DMA0_A) { /* dma chan 0 interrupt */ if ((dma0_status & PLX_DMA_EN_BIT) && - !(dma0_status & PLX_DMA_DONE_BIT)) + !(dma0_status & PLX_DMA_DONE_BIT)) { writeb(PLX_DMA_EN_BIT | PLX_CLEAR_DMA_INTR_BIT, - devpriv->plx9080_iobase + PLX_DMA0_CS_REG); - else + devpriv->plx9080_iobase + PLX_REG_DMACSR0); + } else { writeb(PLX_CLEAR_DMA_INTR_BIT, - devpriv->plx9080_iobase + PLX_DMA0_CS_REG); + devpriv->plx9080_iobase + PLX_REG_DMACSR0); + } spin_unlock_irqrestore(&dev->spinlock, flags); if (dma0_status & PLX_DMA_EN_BIT) { load_ao_dma(dev, cmd); @@ -3069,7 +3053,7 @@ static irqreturn_t handle_interrupt(int irq, void *d) uint32_t plx_status; uint32_t plx_bits; - plx_status = readl(devpriv->plx9080_iobase + PLX_INTRCS_REG); + plx_status = readl(devpriv->plx9080_iobase + PLX_REG_INTCSR); status = readw(devpriv->main_iobase + HW_STATUS_REG); /* @@ -3085,8 +3069,8 @@ static irqreturn_t handle_interrupt(int irq, void *d) /* clear possible plx9080 interrupt sources */ if (plx_status & ICS_LDIA) { /* clear local doorbell interrupt */ - plx_bits = readl(devpriv->plx9080_iobase + PLX_DBR_OUT_REG); - writel(plx_bits, devpriv->plx9080_iobase + PLX_DBR_OUT_REG); + plx_bits = readl(devpriv->plx9080_iobase + PLX_REG_L2PDBELL); + writel(plx_bits, devpriv->plx9080_iobase + PLX_REG_L2PDBELL); } return IRQ_HANDLED; @@ -3725,7 +3709,7 @@ static uint16_t read_eeprom(struct comedi_device *dev, uint8_t address) unsigned int bitstream = (read_command << 8) | address; unsigned int bit; void __iomem * const plx_control_addr = - devpriv->plx9080_iobase + PLX_CONTROL_REG; + devpriv->plx9080_iobase + PLX_REG_CNTRL; uint16_t value; static const int value_length = 16; static const int eeprom_udelay = 1; @@ -3962,7 +3946,7 @@ static int setup_subdevices(struct comedi_device *dev) /* serial EEPROM, if present */ s = &dev->subdevices[8]; - if (readl(devpriv->plx9080_iobase + PLX_CONTROL_REG) & CTL_EECHK) { + if (readl(devpriv->plx9080_iobase + PLX_REG_CNTRL) & CTL_EECHK) { s->type = COMEDI_SUBD_MEMORY; s->subdev_flags = SDF_READABLE | SDF_INTERNAL; s->n_chan = 128; @@ -4019,15 +4003,15 @@ static int auto_attach(struct comedi_device *dev, } /* figure out what local addresses are */ - local_range = readl(devpriv->plx9080_iobase + PLX_LAS0RNG_REG) & + local_range = readl(devpriv->plx9080_iobase + PLX_REG_LAS0RR) & LRNG_MEM_MASK; - local_decode = readl(devpriv->plx9080_iobase + PLX_LAS0MAP_REG) & + local_decode = readl(devpriv->plx9080_iobase + PLX_REG_LAS0BA) & local_range & LMAP_MEM_MASK; devpriv->local0_iobase = ((uint32_t)devpriv->main_phys_iobase & ~local_range) | local_decode; - local_range = readl(devpriv->plx9080_iobase + PLX_LAS1RNG_REG) & + local_range = readl(devpriv->plx9080_iobase + PLX_REG_LAS1RR) & LRNG_MEM_MASK; - local_decode = readl(devpriv->plx9080_iobase + PLX_LAS1MAP_REG) & + local_decode = readl(devpriv->plx9080_iobase + PLX_REG_LAS1BA) & local_range & LMAP_MEM_MASK; devpriv->local1_iobase = ((uint32_t)devpriv->dio_counter_phys_iobase & ~local_range) | local_decode; diff --git a/drivers/staging/comedi/drivers/gsc_hpdi.c b/drivers/staging/comedi/drivers/gsc_hpdi.c index 63b5cbc44bda..e2831e135a8d 100644 --- a/drivers/staging/comedi/drivers/gsc_hpdi.c +++ b/drivers/staging/comedi/drivers/gsc_hpdi.c @@ -158,10 +158,7 @@ static void gsc_hpdi_drain_dma(struct comedi_device *dev, unsigned int channel) unsigned int size; unsigned int next; - if (channel) - next = readl(devpriv->plx9080_mmio + PLX_DMA1_PCI_ADDRESS_REG); - else - next = readl(devpriv->plx9080_mmio + PLX_DMA0_PCI_ADDRESS_REG); + next = readl(devpriv->plx9080_mmio + PLX_REG_DMAPADR(channel)); idx = devpriv->dma_desc_index; start = le32_to_cpu(devpriv->dma_desc[idx].pci_start_addr); @@ -201,7 +198,7 @@ static irqreturn_t gsc_hpdi_interrupt(int irq, void *d) if (!dev->attached) return IRQ_NONE; - plx_status = readl(devpriv->plx9080_mmio + PLX_INTRCS_REG); + plx_status = readl(devpriv->plx9080_mmio + PLX_REG_INTCSR); if ((plx_status & (ICS_DMA0_A | ICS_DMA1_A | ICS_LIA)) == 0) return IRQ_NONE; @@ -213,11 +210,11 @@ static irqreturn_t gsc_hpdi_interrupt(int irq, void *d) /* spin lock makes sure no one else changes plx dma control reg */ spin_lock_irqsave(&dev->spinlock, flags); - dma0_status = readb(devpriv->plx9080_mmio + PLX_DMA0_CS_REG); + dma0_status = readb(devpriv->plx9080_mmio + PLX_REG_DMACSR0); if (plx_status & ICS_DMA0_A) { /* dma chan 0 interrupt */ writeb((dma0_status & PLX_DMA_EN_BIT) | PLX_CLEAR_DMA_INTR_BIT, - devpriv->plx9080_mmio + PLX_DMA0_CS_REG); + devpriv->plx9080_mmio + PLX_REG_DMACSR0); if (dma0_status & PLX_DMA_EN_BIT) gsc_hpdi_drain_dma(dev, 0); @@ -226,19 +223,19 @@ static irqreturn_t gsc_hpdi_interrupt(int irq, void *d) /* spin lock makes sure no one else changes plx dma control reg */ spin_lock_irqsave(&dev->spinlock, flags); - dma1_status = readb(devpriv->plx9080_mmio + PLX_DMA1_CS_REG); + dma1_status = readb(devpriv->plx9080_mmio + PLX_REG_DMACSR1); if (plx_status & ICS_DMA1_A) { /* XXX */ /* dma chan 1 interrupt */ writeb((dma1_status & PLX_DMA_EN_BIT) | PLX_CLEAR_DMA_INTR_BIT, - devpriv->plx9080_mmio + PLX_DMA1_CS_REG); + devpriv->plx9080_mmio + PLX_REG_DMACSR1); } spin_unlock_irqrestore(&dev->spinlock, flags); /* clear possible plx9080 interrupt sources */ if (plx_status & ICS_LDIA) { /* clear local doorbell interrupt */ - plx_bits = readl(devpriv->plx9080_mmio + PLX_DBR_OUT_REG); - writel(plx_bits, devpriv->plx9080_mmio + PLX_DBR_OUT_REG); + plx_bits = readl(devpriv->plx9080_mmio + PLX_REG_L2PDBELL); + writel(plx_bits, devpriv->plx9080_mmio + PLX_REG_L2PDBELL); } if (hpdi_board_status & RX_OVERRUN_BIT) { @@ -307,19 +304,19 @@ static int gsc_hpdi_cmd(struct comedi_device *dev, * occasionally cause problems with transfer of first dma * block. Initializing them to zero seems to fix the problem. */ - writel(0, devpriv->plx9080_mmio + PLX_DMA0_TRANSFER_SIZE_REG); - writel(0, devpriv->plx9080_mmio + PLX_DMA0_PCI_ADDRESS_REG); - writel(0, devpriv->plx9080_mmio + PLX_DMA0_LOCAL_ADDRESS_REG); + writel(0, devpriv->plx9080_mmio + PLX_REG_DMASIZ0); + writel(0, devpriv->plx9080_mmio + PLX_REG_DMAPADR0); + writel(0, devpriv->plx9080_mmio + PLX_REG_DMALADR0); /* give location of first dma descriptor */ bits = devpriv->dma_desc_phys_addr | PLX_DESC_IN_PCI_BIT | PLX_INTR_TERM_COUNT | PLX_XFER_LOCAL_TO_PCI; - writel(bits, devpriv->plx9080_mmio + PLX_DMA0_DESCRIPTOR_REG); + writel(bits, devpriv->plx9080_mmio + PLX_REG_DMADPR0); /* enable dma transfer */ spin_lock_irqsave(&dev->spinlock, flags); writeb(PLX_DMA_EN_BIT | PLX_DMA_START_BIT | PLX_CLEAR_DMA_INTR_BIT, - devpriv->plx9080_mmio + PLX_DMA0_CS_REG); + devpriv->plx9080_mmio + PLX_REG_DMACSR0); spin_unlock_irqrestore(&dev->spinlock, flags); if (cmd->stop_src == TRIG_COUNT) @@ -538,7 +535,7 @@ static int gsc_hpdi_init(struct comedi_device *dev) plx_intcsr_bits = ICS_AERR | ICS_PERR | ICS_PIE | ICS_PLIE | ICS_PAIE | ICS_LIE | ICS_DMA0_E; - writel(plx_intcsr_bits, devpriv->plx9080_mmio + PLX_INTRCS_REG); + writel(plx_intcsr_bits, devpriv->plx9080_mmio + PLX_REG_INTCSR); return 0; } @@ -554,9 +551,9 @@ static void gsc_hpdi_init_plx9080(struct comedi_device *dev) #else bits = 0; #endif - writel(bits, devpriv->plx9080_mmio + PLX_BIGEND_REG); + writel(bits, devpriv->plx9080_mmio + PLX_REG_BIGEND); - writel(0, devpriv->plx9080_mmio + PLX_INTRCS_REG); + writel(0, devpriv->plx9080_mmio + PLX_REG_INTCSR); gsc_hpdi_abort_dma(dev, 0); gsc_hpdi_abort_dma(dev, 1); @@ -584,7 +581,7 @@ static void gsc_hpdi_init_plx9080(struct comedi_device *dev) /* enable local burst mode */ bits |= PLX_DMA_LOCAL_BURST_EN_BIT; bits |= PLX_LOCAL_BUS_32_WIDE_BITS; - writel(bits, plx_iobase + PLX_DMA0_MODE_REG); + writel(bits, plx_iobase + PLX_REG_DMAMODE0); } static int gsc_hpdi_auto_attach(struct comedi_device *dev, @@ -680,7 +677,7 @@ static void gsc_hpdi_detach(struct comedi_device *dev) free_irq(dev->irq, dev); if (devpriv) { if (devpriv->plx9080_mmio) { - writel(0, devpriv->plx9080_mmio + PLX_INTRCS_REG); + writel(0, devpriv->plx9080_mmio + PLX_REG_INTCSR); iounmap(devpriv->plx9080_mmio); } if (dev->mmio) diff --git a/drivers/staging/comedi/drivers/plx9080.h b/drivers/staging/comedi/drivers/plx9080.h index 3759a19a5a15..92d248017d53 100644 --- a/drivers/staging/comedi/drivers/plx9080.h +++ b/drivers/staging/comedi/drivers/plx9080.h @@ -36,7 +36,7 @@ struct plx_dma_desc { __le32 transfer_size; /* * address of next descriptor (quad word aligned), plus some - * additional bits (see PLX_DMA0_DESCRIPTOR_REG) + * additional bits (see PLX_REG_DMADPR) */ __le32 next; }; @@ -49,10 +49,11 @@ struct plx_dma_desc { ** **********************************************************************/ -/* L, Local Addr Space 0 Range Register */ -#define PLX_LAS0RNG_REG 0x0000 -/* L, Local Addr Space 1 Range Register */ -#define PLX_LAS1RNG_REG 0x00f0 +/* Local Address Space 0 Range Register */ +#define PLX_REG_LAS0RR 0x0000 +/* Local Address Space 1 Range Register */ +#define PLX_REG_LAS1RR 0x00f0 + #define LRNG_IO 0x00000001 /* Map to: 1=I/O, 0=Mem */ #define LRNG_ANY32 0x00000000 /* Locate anywhere in 32 bit */ #define LRNG_LT1MB 0x00000002 /* Locate in 1st meg */ @@ -61,21 +62,23 @@ struct plx_dma_desc { #define LRNG_MEM_MASK 0xfffffff0 /* bits that specify range for normal io */ #define LRNG_IO_MASK 0xfffffffc -/* L, Local Addr Space 0 Remap Register */ -#define PLX_LAS0MAP_REG 0x0004 -/* L, Local Addr Space 1 Remap Register */ -#define PLX_LAS1MAP_REG 0x00f4 + +/* Local Address Space 0 Local Base Address (Remap) Register */ +#define PLX_REG_LAS0BA 0x0004 +/* Local Address Space 1 Local Base Address (Remap) Register */ +#define PLX_REG_LAS1BA 0x00f4 + #define LMAP_EN 0x00000001 /* Enable slave decode */ /* bits that specify decode for memory io */ #define LMAP_MEM_MASK 0xfffffff0 /* bits that specify decode bits for normal io */ #define LMAP_IO_MASK 0xfffffffc -/* - * Mode/Arbitration Register. - */ -#define PLX_MARB_REG 0x8 /* L, Local Arbitration Register */ -#define PLX_DMAARB_REG 0xac +/* Mode/Arbitration Register */ +#define PLX_REG_MARBR 0x0008 +/* DMA Arbitration Register (alias of MARBR). */ +#define PLX_REG_DMAARB 0x00ac + enum marb_bits { MARB_LLT_MASK = 0x000000ff, /* Local Bus Latency Timer */ MARB_LPT_MASK = 0x0000ff00, /* Local Bus Pause Timer */ @@ -97,7 +100,9 @@ enum marb_bits { MARB_USE_SUBSYSTEM_IDS = 0x20000000, }; -#define PLX_BIGEND_REG 0xc +/* Big/Little Endian Descriptor Register */ +#define PLX_REG_BIGEND 0x000c + enum bigend_bits { /* use big endian ordering for configuration register accesses */ BIGEND_CONFIG = 0x1, @@ -119,11 +124,16 @@ enum bigend_bits { ** This expansion ROM code is executed by the host CPU at boot time. ** For this reason no bit definitions are provided here. */ -#define PLX_ROMRNG_REG 0x0010 /* L, Expn ROM Space Range Register */ -/* L, Local Addr Space Range Register */ -#define PLX_ROMMAP_REG 0x0014 +/* Expansion ROM Range Register */ +#define PLX_REG_EROMRR 0x0010 +/* Expansion ROM Local Base Address (Remap) Register */ +#define PLX_REG_EROMBA 0x0014 + +/* Local Address Space 0/Expansion ROM Bus Region Descriptor Register */ +#define PLX_REG_LBRD0 0x0018 +/* Local Address Space 1 Bus Region Descriptor Register */ +#define PLX_REG_LBRD1 0x00f8 -#define PLX_REGION0_REG 0x0018 /* L, Local Bus Region 0 Descriptor */ #define RGN_WIDTH 0x00000002 /* Local bus width bits */ #define RGN_8BITS 0x00000000 /* 08 bit Local Bus */ #define RGN_16BITS 0x00000001 /* 16 bit Local Bus */ @@ -149,15 +159,18 @@ enum bigend_bits { #define RGN_THROT 0x08000000 /* De-assert TRDY when FIFO full */ #define RGN_TRD 0xF0000000 /* Target Ready Delay /8 */ -#define PLX_REGION1_REG 0x00f8 /* L, Local Bus Region 1 Descriptor */ +/* Local Range Register for Direct Master to PCI */ +#define PLX_REG_DMRR 0x001c -#define PLX_DMRNG_REG 0x001C /* L, Direct Master Range Register */ +/* Local Bus Base Address Register for Direct Master to PCI Memory */ +#define PLX_REG_DMLBAM 0x0020 -#define PLX_LBAPMEM_REG 0x0020 /* L, Lcl Base Addr for PCI mem space */ +/* Local Base Address Register for Direct Master to PCI IO/CFG */ +#define PLX_REG_DMLBAI 0x0024 -#define PLX_LBAPIO_REG 0x0024 /* L, Lcl Base Addr for PCI I/O space */ +/* PCI Base Address (Remap) Register for Direct Master to PCI Memory */ +#define PLX_REG_DMPBAM 0x0028 -#define PLX_DMMAP_REG 0x0028 /* L, Direct Master Remap Register */ #define DMM_MAE 0x00000001 /* Direct Mstr Memory Acc Enable */ #define DMM_IAE 0x00000002 /* Direct Mstr I/O Acc Enable */ #define DMM_LCK 0x00000004 /* LOCK Input Enable */ @@ -173,7 +186,9 @@ enum bigend_bits { #define DMM_PAF7 0x000000D0 /* Programmable Almost fill level */ #define DMM_MAP 0xFFFF0000 /* Remap Address Bits */ -#define PLX_CAR_REG 0x002C /* L, Configuration Address Register */ +/* PCI Configuration Address Register for Direct Master to PCI IO/CFG */ +#define PLX_REG_DMCFGA 0x002c + #define CAR_CT0 0x00000000 /* Config Type 0 */ #define CAR_CT1 0x00000001 /* Config Type 1 */ #define CAR_REG 0x000000FC /* Register Number Bits */ @@ -182,11 +197,38 @@ enum bigend_bits { #define CAR_BUS 0x00FF0000 /* Bus Number Bits */ #define CAR_CFG 0x80000000 /* Config Spc Access Enable */ -#define PLX_DBR_IN_REG 0x0060 /* L, PCI to Local Doorbell Register */ - -#define PLX_DBR_OUT_REG 0x0064 /* L, Local to PCI Doorbell Register */ +/* + * Mailbox Register N (N <= 7) + * + * Note that if the I2O feature is enabled (QSR[0] is set), Mailbox Register 0 + * is replaced by the Inbound Queue Port, and Mailbox Register 1 is replaced + * by the Outbound Queue Port. However, Mailbox Register 0 and 1 are always + * accessible at alternative offsets if the I2O feature is enabled. + */ +#define PLX_REG_MBOX(n) (0x0040 + (n) * 4) +#define PLX_REG_MBOX0 PLX_REG_MBOX(0) +#define PLX_REG_MBOX1 PLX_REG_MBOX(1) +#define PLX_REG_MBOX2 PLX_REG_MBOX(2) +#define PLX_REG_MBOX3 PLX_REG_MBOX(3) +#define PLX_REG_MBOX4 PLX_REG_MBOX(4) +#define PLX_REG_MBOX5 PLX_REG_MBOX(5) +#define PLX_REG_MBOX6 PLX_REG_MBOX(6) +#define PLX_REG_MBOX7 PLX_REG_MBOX(7) + +/* Alternative offsets for Mailbox Registers 0 and 1 (in case I2O is enabled) */ +#define PLX_REG_ALT_MBOX(n) ((n) < 2 ? 0x0078 + (n) * 4 : PLX_REG_MBOX(n)) +#define PLX_REG_ALT_MBOX0 PLX_REG_ALT_MBOX(0) +#define PLX_REG_ALT_MBOX1 PLX_REG_ALT_MBOX(1) + +/* PCI-to-Local Doorbell Register */ +#define PLX_REG_P2LDBELL 0x0060 + +/* Local-to-PCI Doorbell Register */ +#define PLX_REG_L2PDBELL 0x0064 + +/* Interrupt Control/Status Register */ +#define PLX_REG_INTCSR 0x0068 -#define PLX_INTRCS_REG 0x0068 /* L, Interrupt Control/Status Reg */ #define ICS_AERR 0x00000001 /* Assert LSERR on ABORT */ #define ICS_PERR 0x00000002 /* Assert LSERR on Parity Error */ #define ICS_SERR 0x00000004 /* Generate PCI SERR# */ @@ -214,7 +256,12 @@ enum bigend_bits { /* mailbox x is active */ #define ICS_MBIA(x) (0x10000000 << ((x) & 0x3)) -#define PLX_CONTROL_REG 0x006C /* L, EEPROM Cntl & PCI Cmd Codes */ +/* + * Serial EEPROM Control, PCI Command Codes, User I/O Control, + * Init Control Register + */ +#define PLX_REG_CNTRL 0x006c + #define CTL_RDMA 0x0000000E /* DMA Read Command */ #define CTL_WDMA 0x00000070 /* DMA Write Command */ #define CTL_RMEM 0x00000600 /* Memory Read Command */ @@ -230,12 +277,17 @@ enum bigend_bits { #define CTL_RESET 0x40000000 /* !! Adapter Reset !! */ #define CTL_READY 0x80000000 /* Local Init Done */ -#define PLX_ID_REG 0x70 /* hard-coded plx vendor and device ids */ +/* PCI Permanent Configuration ID Register (hard-coded PLX vendor and device) */ +#define PLX_REG_PCIHIDR 0x0070 + +/* PCI Permanent Revision ID Register (hard-coded silicon revision) (8-bit). */ +#define PLX_REG_PCIHREV 0x0074 -#define PLX_REVISION_REG 0x74 /* silicon revision */ +/* DMA Channel N Mode Register (N <= 1) */ +#define PLX_REG_DMAMODE(n) ((n) ? PLX_REG_DMAMODE1 : PLX_REG_DMAMODE0) +#define PLX_REG_DMAMODE0 0x0080 +#define PLX_REG_DMAMODE1 0x0094 -#define PLX_DMA0_MODE_REG 0x80 /* dma channel 0 mode register */ -#define PLX_DMA1_MODE_REG 0x94 /* dma channel 0 mode register */ #define PLX_LOCAL_BUS_16_WIDE_BITS 0x1 #define PLX_LOCAL_BUS_32_WIDE_BITS 0x3 #define PLX_LOCAL_BUS_WIDTH_MASK 0x3 @@ -254,20 +306,26 @@ enum bigend_bits { /* routes dma interrupt to pci bus (instead of local bus) */ #define PLX_DMA_INTR_PCI_BIT 0x20000 -/* pci address that dma transfers start at */ -#define PLX_DMA0_PCI_ADDRESS_REG 0x84 -#define PLX_DMA1_PCI_ADDRESS_REG 0x98 +/* DMA Channel N PCI Address Register (N <= 1) */ +#define PLX_REG_DMAPADR(n) ((n) ? PLX_REG_DMAPADR1 : PLX_REG_DMAPADR0) +#define PLX_REG_DMAPADR0 0x0084 +#define PLX_REG_DMAPADR1 0x0098 + +/* DMA Channel N Local Address Register (N <= 1) */ +#define PLX_REG_DMALADR(n) ((n) ? PLX_REG_DMALADR1 : PLX_REG_DMALADR0) +#define PLX_REG_DMALADR0 0x0088 +#define PLX_REG_DMALADR1 0x009c -/* local address that dma transfers start at */ -#define PLX_DMA0_LOCAL_ADDRESS_REG 0x88 -#define PLX_DMA1_LOCAL_ADDRESS_REG 0x9c +/* DMA Channel N Transfer Size (Bytes) Register (N <= 1) (first 23 bits) */ +#define PLX_REG_DMASIZ(n) ((n) ? PLX_REG_DMASIZ1 : PLX_REG_DMASIZ0) +#define PLX_REG_DMASIZ0 0x008c +#define PLX_REG_DMASIZ1 0x00a0 -/* number of bytes to transfer (first 23 bits) */ -#define PLX_DMA0_TRANSFER_SIZE_REG 0x8c -#define PLX_DMA1_TRANSFER_SIZE_REG 0xa0 +/* DMA Channel N Descriptor Pointer Register (N <= 1) */ +#define PLX_REG_DMADPR(n) ((n) ? PLX_REG_DMADPR1 : PLX_REG_DMADPR0) +#define PLX_REG_DMADPR0 0x0090 +#define PLX_REG_DMADPR1 0x00a4 -#define PLX_DMA0_DESCRIPTOR_REG 0x90 /* descriptor pointer register */ -#define PLX_DMA1_DESCRIPTOR_REG 0xa4 /* descriptor is located in pci space (not local space) */ #define PLX_DESC_IN_PCI_BIT 0x1 #define PLX_END_OF_CHAIN_BIT 0x2 /* end of chain bit */ @@ -276,15 +334,33 @@ enum bigend_bits { /* transfer from local to pci bus (not pci to local) */ #define PLX_XFER_LOCAL_TO_PCI 0x8 -#define PLX_DMA0_CS_REG 0xa8 /* command status register */ -#define PLX_DMA1_CS_REG 0xa9 +/* DMA Channel N Command/Status Register (N <= 1) (8-bit) */ +#define PLX_REG_DMACSR(n) ((n) ? PLX_REG_DMACSR1 : PLX_REG_DMACSR0) +#define PLX_REG_DMACSR0 0x00a8 +#define PLX_REG_DMACSR1 0x00a9 + #define PLX_DMA_EN_BIT 0x1 /* enable dma channel */ #define PLX_DMA_START_BIT 0x2 /* start dma transfer */ #define PLX_DMA_ABORT_BIT 0x4 /* abort dma transfer */ #define PLX_CLEAR_DMA_INTR_BIT 0x8 /* clear dma interrupt */ #define PLX_DMA_DONE_BIT 0x10 /* transfer done status bit */ -#define PLX_DMA0_THRESHOLD_REG 0xb0 /* command status register */ +/* DMA Threshold Register */ +#define PLX_REG_DMATHR 0x00b0 + +/* + * Messaging Queue Registers OPLFIS, OPLFIM, IQP, OQP, MQCR, QBAR, IFHPR, + * IFTPR, IPHPR, IPTPR, OFHPR, OFTPR, OPHPR, OPTPR, and QSR have been omitted. + * They are used by the I2O feature. (IQP and OQP occupy the usual offsets of + * the MBOX0 and MBOX1 registers if the I2O feature is enabled, but MBOX0 and + * MBOX1 are accessible via alternative offsets. + */ + +/* Queue Status/Control Register */ +#define PLX_REG_QSR 0x00e8 + +/* Value of QSR after reset - disables I2O feature completely. */ +#define PLX_QSR_VALUE_AFTER_RESET 0x00000050 /* * Accesses near the end of memory can cause the PLX chip @@ -301,10 +377,7 @@ static inline int plx9080_abort_dma(void __iomem *iobase, unsigned int channel) const int timeout = 10000; unsigned int i; - if (channel) - dma_cs_addr = iobase + PLX_DMA1_CS_REG; - else - dma_cs_addr = iobase + PLX_DMA0_CS_REG; + dma_cs_addr = iobase + PLX_REG_DMACSR(channel); /* abort dma transfer if necessary */ dma_status = readb(dma_cs_addr); diff --git a/drivers/staging/comedi/drivers/rtd520.c b/drivers/staging/comedi/drivers/rtd520.c index 0990f621dcd1..236f6adcad6f 100644 --- a/drivers/staging/comedi/drivers/rtd520.c +++ b/drivers/staging/comedi/drivers/rtd520.c @@ -1175,7 +1175,7 @@ static void rtd_reset(struct comedi_device *dev) writel(0, dev->mmio + LAS0_BOARD_RESET); usleep_range(100, 1000); /* needed? */ - writel(0, devpriv->lcfg + PLX_INTRCS_REG); + writel(0, devpriv->lcfg + PLX_REG_INTCSR); writew(0, dev->mmio + LAS0_IT); writew(~0, dev->mmio + LAS0_CLEAR); readw(dev->mmio + LAS0_CLEAR); @@ -1316,7 +1316,7 @@ static int rtd_auto_attach(struct comedi_device *dev, devpriv->fifosz = ret; if (dev->irq) - writel(ICS_PIE | ICS_PLIE, devpriv->lcfg + PLX_INTRCS_REG); + writel(ICS_PIE | ICS_PLIE, devpriv->lcfg + PLX_REG_INTCSR); return 0; } |