media: atomisp: ov2680: Drop custom ATOMISP_IOC_S_EXPOSURE support

Exposure and gain control should use standard v4l2 controls,
not a custom ioctl.

The next patch in this series will re-add support as standard controls,
this is split into 2 patches for easier reviewing.

Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

2 files changed, 2 insertions, 210 deletions

diff --git a/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c b/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c
index d17000df7446..8fadccfbc1c6 100644
--- a/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c
+++ b/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c
@@ -60,181 +60,6 @@ static int ov2680_write_reg_array(struct i2c_client *client,
 	return 0;
 }
 
-static long __ov2680_set_exposure(struct v4l2_subdev *sd, int coarse_itg,
-				  int gain, int digitgain)
-
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct ov2680_device *dev = to_ov2680_sensor(sd);
-	u16 vts;
-	int ret, exp_val;
-
-	dev_dbg(&client->dev,
-		"+++++++__ov2680_set_exposure coarse_itg %d, gain %d, digitgain %d++\n",
-		coarse_itg, gain, digitgain);
-
-	vts = dev->res->lines_per_frame;
-
-	/* group hold */
-	ret = ov_write_reg8(client, OV2680_GROUP_ACCESS, 0x00);
-	if (ret) {
-		dev_err(&client->dev, "%s: write 0x%02x: error, aborted\n",
-			__func__, OV2680_GROUP_ACCESS);
-		return ret;
-	}
-
-	/* Increase the VTS to match exposure + MARGIN */
-	if (coarse_itg > vts - OV2680_INTEGRATION_TIME_MARGIN)
-		vts = (u16)coarse_itg + OV2680_INTEGRATION_TIME_MARGIN;
-
-	ret = ov_write_reg16(client, OV2680_TIMING_VTS_H, vts);
-	if (ret) {
-		dev_err(&client->dev, "%s: write 0x%02x: error, aborted\n",
-			__func__, OV2680_TIMING_VTS_H);
-		return ret;
-	}
-
-	/* set exposure */
-
-	/* Lower four bit should be 0*/
-	exp_val = coarse_itg << 4;
-	ret = ov_write_reg8(client, OV2680_EXPOSURE_L, exp_val & 0xFF);
-	if (ret) {
-		dev_err(&client->dev, "%s: write 0x%02x: error, aborted\n",
-			__func__, OV2680_EXPOSURE_L);
-		return ret;
-	}
-
-	ret = ov_write_reg8(client, OV2680_EXPOSURE_M, (exp_val >> 8) & 0xFF);
-	if (ret) {
-		dev_err(&client->dev, "%s: write 0x%02x: error, aborted\n",
-			__func__, OV2680_EXPOSURE_M);
-		return ret;
-	}
-
-	ret = ov_write_reg8(client, OV2680_EXPOSURE_H, (exp_val >> 16) & 0x0F);
-	if (ret) {
-		dev_err(&client->dev, "%s: write 0x%02x: error, aborted\n",
-			__func__, OV2680_EXPOSURE_H);
-		return ret;
-	}
-
-	/* Analog gain */
-	ret = ov_write_reg16(client, OV2680_AGC_H, gain);
-	if (ret) {
-		dev_err(&client->dev, "%s: write 0x%02x: error, aborted\n",
-			__func__, OV2680_AGC_H);
-		return ret;
-	}
-	/* Digital gain */
-	if (digitgain) {
-		ret = ov_write_reg16(client, OV2680_MWB_RED_GAIN_H, digitgain);
-		if (ret) {
-			dev_err(&client->dev,
-				"%s: write 0x%02x: error, aborted\n",
-				__func__, OV2680_MWB_RED_GAIN_H);
-			return ret;
-		}
-
-		ret = ov_write_reg16(client, OV2680_MWB_GREEN_GAIN_H, digitgain);
-		if (ret) {
-			dev_err(&client->dev,
-				"%s: write 0x%02x: error, aborted\n",
-				__func__, OV2680_MWB_RED_GAIN_H);
-			return ret;
-		}
-
-		ret = ov_write_reg16(client, OV2680_MWB_BLUE_GAIN_H, digitgain);
-		if (ret) {
-			dev_err(&client->dev,
-				"%s: write 0x%02x: error, aborted\n",
-				__func__, OV2680_MWB_RED_GAIN_H);
-			return ret;
-		}
-	}
-
-	/* End group */
-	ret = ov_write_reg8(client, OV2680_GROUP_ACCESS, 0x10);
-	if (ret)
-		return ret;
-
-	/* Delay launch group */
-	ret = ov_write_reg8(client, OV2680_GROUP_ACCESS, 0xa0);
-	if (ret)
-		return ret;
-	return ret;
-}
-
-static int ov2680_set_exposure(struct v4l2_subdev *sd, int exposure,
-			       int gain, int digitgain)
-{
-	struct ov2680_device *dev = to_ov2680_sensor(sd);
-	int ret = 0;
-
-	mutex_lock(&dev->input_lock);
-
-	dev->exposure = exposure;
-	dev->gain = gain;
-	dev->digitgain = digitgain;
-
-	if (dev->power_on)
-		ret = __ov2680_set_exposure(sd, exposure, gain, digitgain);
-
-	mutex_unlock(&dev->input_lock);
-
-	return ret;
-}
-
-static long ov2680_s_exposure(struct v4l2_subdev *sd,
-			      struct atomisp_exposure *exposure)
-{
-	u16 coarse_itg = exposure->integration_time[0];
-	u16 analog_gain = exposure->gain[0];
-	u16 digital_gain = exposure->gain[1];
-
-	/* we should not accept the invalid value below */
-	if (analog_gain == 0) {
-		struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-		v4l2_err(client, "%s: invalid value\n", __func__);
-		return -EINVAL;
-	}
-
-	return ov2680_set_exposure(sd, coarse_itg, analog_gain, digital_gain);
-}
-
-static long ov2680_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg)
-{
-	switch (cmd) {
-	case ATOMISP_IOC_S_EXPOSURE:
-		return ov2680_s_exposure(sd, arg);
-
-	default:
-		return -EINVAL;
-	}
-	return 0;
-}
-
-/*
- * This returns the exposure time being used. This should only be used
- * for filling in EXIF data, not for actual image processing.
- */
-static int ov2680_q_exposure(struct v4l2_subdev *sd, s32 *value)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	u32 reg_val;
-	int ret;
-
-	/* get exposure */
-	ret = ov_read_reg24(client, OV2680_EXPOSURE_H, &reg_val);
-	if (ret)
-		return ret;
-
-	/* Lower four bits are not part of the exposure val (always 0) */
-	*value = reg_val >> 4;
-	return 0;
-}
-
 static void ov2680_set_bayer_order(struct ov2680_device *sensor, struct v4l2_mbus_framefmt *fmt)
 {
 	static const int ov2680_hv_flip_bayer_order[] = {
@@ -314,25 +139,8 @@ static int ov2680_s_ctrl(struct v4l2_ctrl *ctrl)
 	return ret;
 }
 
-static int ov2680_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
-{
-	struct v4l2_subdev *sd = ctrl_to_sd(ctrl);
-	int ret = 0;
-
-	switch (ctrl->id) {
-	case V4L2_CID_EXPOSURE_ABSOLUTE:
-		ret = ov2680_q_exposure(sd, &ctrl->val);
-		break;
-	default:
-		ret = -EINVAL;
-	}
-
-	return ret;
-}
-
 static const struct v4l2_ctrl_ops ov2680_ctrl_ops = {
 	.s_ctrl = ov2680_s_ctrl,
-	.g_volatile_ctrl = ov2680_g_volatile_ctrl
 };
 
 static int ov2680_init_registers(struct v4l2_subdev *sd)
@@ -441,10 +249,6 @@ static int power_up(struct v4l2_subdev *sd)
 	if (ret)
 		goto fail_init_registers;
 
-	ret = __ov2680_set_exposure(sd, dev->exposure, dev->gain, dev->digitgain);
-	if (ret)
-		goto fail_init_registers;
-
 	dev->power_on = true;
 	return 0;
 
@@ -545,7 +349,7 @@ static int ov2680_set_fmt(struct v4l2_subdev *sd,
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
 	struct v4l2_mbus_framefmt *fmt;
 	struct ov2680_resolution *res;
-	int vts, ret = 0;
+	int ret = 0;
 
 	res = v4l2_find_nearest_size(ov2680_res_preview, ARRAY_SIZE(ov2680_res_preview),
 				     width, height,
@@ -575,13 +379,7 @@ static int ov2680_set_fmt(struct v4l2_subdev *sd,
 		goto err;
 	}
 
-	vts = dev->res->lines_per_frame;
-
-	/* If necessary increase the VTS to match exposure + MARGIN */
-	if (dev->exposure > vts - OV2680_INTEGRATION_TIME_MARGIN)
-		vts = dev->exposure + OV2680_INTEGRATION_TIME_MARGIN;
-
-	ret = ov_write_reg16(client, OV2680_TIMING_VTS_H, vts);
+	ret = ov_write_reg16(client, OV2680_TIMING_VTS_H, dev->res->lines_per_frame);
 	if (ret) {
 		dev_err(&client->dev, "ov2680 write vts err: %d\n", ret);
 		goto err;
@@ -807,7 +605,6 @@ static const struct v4l2_subdev_sensor_ops ov2680_sensor_ops = {
 
 static const struct v4l2_subdev_core_ops ov2680_core_ops = {
 	.s_power = ov2680_s_power,
-	.ioctl = ov2680_ioctl,
 };
 
 static const struct v4l2_subdev_pad_ops ov2680_pad_ops = {
@@ -877,8 +674,6 @@ static int ov2680_probe(struct i2c_client *client)
 
 	dev->client = client;
 	dev->res = &ov2680_res_preview[0];
-	dev->exposure = dev->res->lines_per_frame - OV2680_INTEGRATION_TIME_MARGIN;
-	dev->gain = 250; /* 0-2047 */
 	v4l2_i2c_subdev_init(&dev->sd, client, &ov2680_ops);
 
 	pdata = gmin_camera_platform_data(&dev->sd,
diff --git a/drivers/staging/media/atomisp/i2c/ov2680.h b/drivers/staging/media/atomisp/i2c/ov2680.h
index c7b6fc8bf33d..64a03a7c3e19 100644
--- a/drivers/staging/media/atomisp/i2c/ov2680.h
+++ b/drivers/staging/media/atomisp/i2c/ov2680.h
@@ -163,9 +163,6 @@ struct ov2680_device {
 	struct camera_sensor_platform_data *platform_data;
 	bool power_on;
 	bool is_streaming;
-	u16 exposure;
-	u16 gain;
-	u16 digitgain;
 
 	struct ov2680_mode {
 		struct v4l2_mbus_framefmt fmt;