Merge tag 'thermal-6.9-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull more thermal control updates from Rafael Wysocki:
 "These update thermal drivers for ARM platforms by adding new hardware
  support (r8a779h0, H616 THS), addressing issues (Mediatek LVTS,
  Mediatek MT7896, thermal-of) and cleaning up code.

  Specifics:

   - Fix memory leak in the error path at probe time in the Mediatek
     LVTS driver (Christophe Jaillet)

   - Fix control buffer enablement regression on Meditek MT7896 (Frank
     Wunderlich)

   - Drop spaces before TABs in different places: thermal-of, ST drivers
     and Makefile (Geert Uytterhoeven)

   - Adjust DT binding for NXP as fsl,tmu-range min/maxItems can vary
     among several SoC versions (Fabio Estevam)

   - Add support for the H616 THS controller on Sun8i platforms (Martin
     Botka)

   - Don't fail probe due to zone registration failure because there is
     no trip points defined in the DT (Mark Brown)

   - Support variable TMU array size for new platforms (Peng Fan)

   - Adjust the DT binding for thermal-of and make the polling time not
     required and assume it is zero when not found in the DT (Konrad
     Dybcio)

   - Add r8a779h0 support in both the DT and the rcar_gen3 driver (Geert
     Uytterhoeven)"

* tag 'thermal-6.9-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal/drivers/rcar_gen3: Add support for R-Car V4M
  dt-bindings: thermal: rcar-gen3-thermal: Add r8a779h0 support
  thermal/of: Assume polling-delay(-passive) 0 when absent
  dt-bindings: thermal-zones: Don't require polling-delay(-passive)
  thermal/drivers/qoriq: Fix getting tmu range
  thermal/drivers/sun8i: Don't fail probe due to zone registration failure
  thermal/drivers/sun8i: Add support for H616 THS controller
  thermal/drivers/sun8i: Add SRAM register access code
  thermal/drivers/sun8i: Extend H6 calibration to support 4 sensors
  thermal/drivers/sun8i: Explain unknown H6 register value
  dt-bindings: thermal: sun8i: Add H616 THS controller
  soc: sunxi: sram: export register 0 for THS on H616
  dt-bindings: thermal: qoriq-thermal: Adjust fsl,tmu-range min/maxItems
  thermal: Drop spaces before TABs
  thermal/drivers/mediatek: Fix control buffer enablement on MT7896
  thermal/drivers/mediatek/lvts_thermal: Fix a memory leak in an error handling path

1 files changed, 8 insertions, 4 deletions

diff --git a/drivers/thermal/qoriq_thermal.c b/drivers/thermal/qoriq_thermal.c
index ccc2eea7f9f5..404f01cca4da 100644
--- a/drivers/thermal/qoriq_thermal.c
+++ b/drivers/thermal/qoriq_thermal.c
@@ -57,6 +57,9 @@
 #define REGS_TTRnCR(n)	(0xf10 + 4 * (n)) /* Temperature Range n
 					   * Control Register
 					   */
+#define NUM_TTRCR_V1	4
+#define NUM_TTRCR_MAX	16
+
 #define REGS_IPBRR(n)		(0xbf8 + 4 * (n)) /* IP Block Revision
 						   * Register n
 						   */
@@ -71,6 +74,7 @@ struct qoriq_sensor {
 
 struct qoriq_tmu_data {
 	int ver;
+	u32 ttrcr[NUM_TTRCR_MAX];
 	struct regmap *regmap;
 	struct clk *clk;
 	struct qoriq_sensor	sensor[SITES_MAX];
@@ -182,17 +186,17 @@ static int qoriq_tmu_calibration(struct device *dev,
 				 struct qoriq_tmu_data *data)
 {
 	int i, val, len;
-	u32 range[4];
 	const u32 *calibration;
 	struct device_node *np = dev->of_node;
 
 	len = of_property_count_u32_elems(np, "fsl,tmu-range");
-	if (len < 0 || len > 4) {
+	if (len < 0 || (data->ver == TMU_VER1 && len > NUM_TTRCR_V1) ||
+	    (data->ver > TMU_VER1 && len > NUM_TTRCR_MAX)) {
 		dev_err(dev, "invalid range data.\n");
 		return len;
 	}
 
-	val = of_property_read_u32_array(np, "fsl,tmu-range", range, len);
+	val = of_property_read_u32_array(np, "fsl,tmu-range", data->ttrcr, len);
 	if (val != 0) {
 		dev_err(dev, "failed to read range data.\n");
 		return val;
@@ -200,7 +204,7 @@ static int qoriq_tmu_calibration(struct device *dev,
 
 	/* Init temperature range registers */
 	for (i = 0; i < len; i++)
-		regmap_write(data->regmap, REGS_TTRnCR(i), range[i]);
+		regmap_write(data->regmap, REGS_TTRnCR(i), data->ttrcr[i]);
 
 	calibration = of_get_property(np, "fsl,tmu-calibration", &len);
 	if (calibration == NULL || len % 8) {