thermal: gov_power_allocator: avoid inability to reset a cdev

[ Upstream commit e95fa7404716f6e25021e66067271a4ad8eb1486 ]

Commit 0952177f2a1f ("thermal/core/power_allocator: Update once
cooling devices when temp is low") adds an update flag to avoid
triggering a thermal event when there is no need, and the thermal
cdev is updated once when the temperature is low.

But when the trips are writable, and switch_on_temp is set to be a
higher value, the cooling device state may not be reset to 0,
because last_temperature is smaller than switch_on_temp.

For example:
First:
switch_on_temp=70 control_temp=85;
Then userspace change the trip_temp:
switch_on_temp=45 control_temp=55 cur_temp=54

Then userspace reset the trip_temp:
switch_on_temp=70 control_temp=85 cur_temp=57 last_temp=54

At this time, the cooling device state should be reset to 0.
However, because cur_temp(57) < switch_on_temp(70)
last_temp(54) < switch_on_temp(70)  ---->  update = false,
update is false, the cooling device state can not be reset.

Using the observation that tz->passive can also be regarded as the
temperature status, set the update flag to the tz->passive value.

When the temperature drops below switch_on for the first time, the
states of cooling devices can be reset once, and tz->passive is updated
to 0. In the next round, because tz->passive is 0, cdev->state will not
be updated.

By using the tz->passive value as the "update" flag, the issue above
can be solved, and the cooling devices can be updated only once when the
temperature is low.

Fixes: 0952177f2a1f ("thermal/core/power_allocator: Update once cooling devices when temp is low")
Cc: 5.13+ <stable@vger.kernel.org> # 5.13+
Suggested-by: Wei Wang <wvw@google.com>
Signed-off-by: Di Shen <di.shen@unisoc.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

1 files changed, 1 insertions, 1 deletions

diff --git a/drivers/thermal/gov_power_allocator.c b/drivers/thermal/gov_power_allocator.c
index 1faf55446ba2..fc969642f70b 100644
--- a/drivers/thermal/gov_power_allocator.c
+++ b/drivers/thermal/gov_power_allocator.c
@@ -715,7 +715,7 @@ static int power_allocator_throttle(struct thermal_zone_device *tz, int trip_id)
 
 	ret = __thermal_zone_get_trip(tz, params->trip_switch_on, &trip);
 	if (!ret && (tz->temperature < trip.temperature)) {
-		update = (tz->last_temperature >= trip.temperature);
+		update = tz->passive;
 		tz->passive = 0;
 		reset_pid_controller(params);
 		allow_maximum_power(tz, update);