Merge tag 'tty-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty and serial driver updates from Greg KH:
 "Here is the big set of tty and serial driver updates for 5.19-rc1.

  Lots of tiny cleanups in here, the major stuff is:

   - termbit cleanups and unification by Ilpo. A much needed change that
     goes a long way to making things simpler for all of the different
     arches

   - tty documentation cleanups and movements to their own place in the
     documentation tree

   - old tty driver cleanups and fixes from Jiri to bring some existing
     drivers into the modern world

   - RS485 cleanups and unifications to make it easier for individual
     drivers to support this mode instead of having to duplicate logic
     in each driver

   - Lots of 8250 driver updates and additions

   - new device id additions

   - n_gsm continued fixes and cleanups

   - other minor serial driver updates and cleanups

  All of these have been in linux-next for weeks with no reported issues"

* tag 'tty-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (166 commits)
  tty: Rework receive flow control char logic
  pcmcia: synclink_cs: Don't allow CS5-6
  serial: stm32-usart: Correct CSIZE, bits, and parity
  serial: st-asc: Sanitize CSIZE and correct PARENB for CS7
  serial: sifive: Sanitize CSIZE and c_iflag
  serial: sh-sci: Don't allow CS5-6
  serial: txx9: Don't allow CS5-6
  serial: rda-uart: Don't allow CS5-6
  serial: digicolor-usart: Don't allow CS5-6
  serial: uartlite: Fix BRKINT clearing
  serial: cpm_uart: Fix build error without CONFIG_SERIAL_CPM_CONSOLE
  serial: core: Do stop_rx in suspend path for console if console_suspend is disabled
  tty: serial: qcom-geni-serial: Remove uart frequency table. Instead, find suitable frequency with call to clk_round_rate.
  dt-bindings: serial: renesas,em-uart: Add RZ/V2M clock to access the registers
  serial: 8250_fintek: Check SER_RS485_RTS_* only with RS485
  Revert "serial: 8250_mtk: Make sure to select the right FEATURE_SEL"
  serial: msm_serial: disable interrupts in __msm_console_write()
  serial: meson: acquire port->lock in startup()
  serial: 8250_dw: Use dev_err_probe()
  serial: 8250_dw: Use devm_add_action_or_reset()
  ...

1 files changed, 16 insertions, 30 deletions

diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index 250a1d888eeb..9e01fe6c0ab8 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -313,41 +313,27 @@ static void cdns_uart_handle_rx(void *dev_id, unsigned int isrstatus)
 static void cdns_uart_handle_tx(void *dev_id)
 {
 	struct uart_port *port = (struct uart_port *)dev_id;
+	struct circ_buf *xmit = &port->state->xmit;
 	unsigned int numbytes;
 
-	if (uart_circ_empty(&port->state->xmit)) {
+	if (uart_circ_empty(xmit)) {
 		writel(CDNS_UART_IXR_TXEMPTY, port->membase + CDNS_UART_IDR);
-	} else {
-		numbytes = port->fifosize;
-		while (numbytes && !uart_circ_empty(&port->state->xmit) &&
-		       !(readl(port->membase + CDNS_UART_SR) &
-						CDNS_UART_SR_TXFULL)) {
-			/*
-			 * Get the data from the UART circular buffer
-			 * and write it to the cdns_uart's TX_FIFO
-			 * register.
-			 */
-			writel(
-				port->state->xmit.buf[port->state->xmit.tail],
-					port->membase + CDNS_UART_FIFO);
-
-			port->icount.tx++;
-
-			/*
-			 * Adjust the tail of the UART buffer and wrap
-			 * the buffer if it reaches limit.
-			 */
-			port->state->xmit.tail =
-				(port->state->xmit.tail + 1) &
-					(UART_XMIT_SIZE - 1);
-
-			numbytes--;
-		}
+		return;
+	}
 
-		if (uart_circ_chars_pending(
-				&port->state->xmit) < WAKEUP_CHARS)
-			uart_write_wakeup(port);
+	numbytes = port->fifosize;
+	while (numbytes && !uart_circ_empty(xmit) &&
+	       !(readl(port->membase + CDNS_UART_SR) & CDNS_UART_SR_TXFULL)) {
+
+		writel(xmit->buf[xmit->tail], port->membase + CDNS_UART_FIFO);
+
+		port->icount.tx++;
+		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+		numbytes--;
 	}
+
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(port);
 }
 
 /**