summaryrefslogtreecommitdiff
path: root/drivers/tty
diff options
context:
space:
mode:
authorOlof Johansson <olof@lixom.net>2012-09-23 09:20:37 +0400
committerOlof Johansson <olof@lixom.net>2012-09-23 09:20:37 +0400
commit40169a7c399346281da55ed9905a104d3da47945 (patch)
tree47181afbd7ccf73af8ec0b840d637a794062faa0 /drivers/tty
parent84bae6c379e362aa017efd417199f51d5c2273ac (diff)
parentc164fa62b93782165f12c0e8366f7b46507edb4d (diff)
downloadlinux-40169a7c399346281da55ed9905a104d3da47945.tar.xz
Merge branch 'for-arm-soc-next' of git://git.linaro.org/people/ljones/linux-3.0-ux500 into next/dt
* 'for-arm-soc-next' of git://git.linaro.org/people/ljones/linux-3.0-ux500: ARM: ux500: Fix SSP register address format ARM: ux500: Apply tc3589x's GPIO/IRQ properties to HREF's DT ARM: ux500: Remove redundant #gpio-cell properties from Snowball DT ARM: ux500: Add all encompassing sound node to the HREF Device Tree ARM: ux500: Add nodes for the MSP into the HREF Device Tree ARM: ux500: Add all known I2C sub-device nodes to the HREF DT ARM: ux500: Stop registering I2C sub-devices for HREF when DT is enabled ARM: ux500: Stop registering Audio devices for HREF when DT is enabled ARM: ux500: Add all encompassing sound node to the Snowball Device Tree ARM: ux500: Add nodes for the MSP into Device Tree ARM: ux500: Rename MSP board file to something more meaningful ARM: ux500: Remove platform registration of MSP devices ARM: ux500: Stop registering the MOP500 Audio driver from platform code ARM: ux500: Pass MSP DMA platform data though AUXDATA ARM: ux500: Fork MSP platform registration for step-by-step DT enablement ARM: ux500: Add AB8500 CODEC node to DB8500 Device Tree ARM: ux500: Clean-up MSP platform code ARM: ux500: Pass SDI DMA information though AUX_DATA to MMCI ARM: ux500: Add UART support to the HREF Device Tree ARM: ux500: Add skeleton Device Tree for the HREF reference board ... + sync to v3.6-rc6
Diffstat (limited to 'drivers/tty')
-rw-r--r--drivers/tty/serial/imx.c30
1 files changed, 15 insertions, 15 deletions
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 72ec56e6d42f..5952b25c288e 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -132,6 +132,7 @@
#define UCR4_OREN (1<<1) /* Receiver overrun interrupt enable */
#define UCR4_DREN (1<<0) /* Recv data ready interrupt enable */
#define UFCR_RXTL_SHF 0 /* Receiver trigger level shift */
+#define UFCR_DCEDTE (1<<6) /* DCE/DTE mode select */
#define UFCR_RFDIV (7<<7) /* Reference freq divider mask */
#define UFCR_RFDIV_REG(x) (((x) < 7 ? 6 - (x) : 6) << 7)
#define UFCR_TXTL_SHF 10 /* Transmitter trigger level shift */
@@ -667,22 +668,11 @@ static void imx_break_ctl(struct uart_port *port, int break_state)
static int imx_setup_ufcr(struct imx_port *sport, unsigned int mode)
{
unsigned int val;
- unsigned int ufcr_rfdiv;
-
- /* set receiver / transmitter trigger level.
- * RFDIV is set such way to satisfy requested uartclk value
- */
- val = TXTL << 10 | RXTL;
- ufcr_rfdiv = (clk_get_rate(sport->clk_per) + sport->port.uartclk / 2)
- / sport->port.uartclk;
-
- if(!ufcr_rfdiv)
- ufcr_rfdiv = 1;
-
- val |= UFCR_RFDIV_REG(ufcr_rfdiv);
+ /* set receiver / transmitter trigger level */
+ val = readl(sport->port.membase + UFCR) & (UFCR_RFDIV | UFCR_DCEDTE);
+ val |= TXTL << UFCR_TXTL_SHF | RXTL;
writel(val, sport->port.membase + UFCR);
-
return 0;
}
@@ -754,6 +744,7 @@ static int imx_startup(struct uart_port *port)
}
}
+ spin_lock_irqsave(&sport->port.lock, flags);
/*
* Finally, clear and enable interrupts
*/
@@ -807,7 +798,6 @@ static int imx_startup(struct uart_port *port)
/*
* Enable modem status interrupts
*/
- spin_lock_irqsave(&sport->port.lock,flags);
imx_enable_ms(&sport->port);
spin_unlock_irqrestore(&sport->port.lock,flags);
@@ -837,10 +827,13 @@ static void imx_shutdown(struct uart_port *port)
{
struct imx_port *sport = (struct imx_port *)port;
unsigned long temp;
+ unsigned long flags;
+ spin_lock_irqsave(&sport->port.lock, flags);
temp = readl(sport->port.membase + UCR2);
temp &= ~(UCR2_TXEN);
writel(temp, sport->port.membase + UCR2);
+ spin_unlock_irqrestore(&sport->port.lock, flags);
if (USE_IRDA(sport)) {
struct imxuart_platform_data *pdata;
@@ -869,12 +862,14 @@ static void imx_shutdown(struct uart_port *port)
* Disable all interrupts, port and break condition.
*/
+ spin_lock_irqsave(&sport->port.lock, flags);
temp = readl(sport->port.membase + UCR1);
temp &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN);
if (USE_IRDA(sport))
temp &= ~(UCR1_IREN);
writel(temp, sport->port.membase + UCR1);
+ spin_unlock_irqrestore(&sport->port.lock, flags);
}
static void
@@ -1217,6 +1212,9 @@ imx_console_write(struct console *co, const char *s, unsigned int count)
struct imx_port *sport = imx_ports[co->index];
struct imx_port_ucrs old_ucr;
unsigned int ucr1;
+ unsigned long flags;
+
+ spin_lock_irqsave(&sport->port.lock, flags);
/*
* First, save UCR1/2/3 and then disable interrupts
@@ -1242,6 +1240,8 @@ imx_console_write(struct console *co, const char *s, unsigned int count)
while (!(readl(sport->port.membase + USR2) & USR2_TXDC));
imx_port_ucrs_restore(&sport->port, &old_ucr);
+
+ spin_unlock_irqrestore(&sport->port.lock, flags);
}
/*