summaryrefslogtreecommitdiff
path: root/drivers/tty
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2020-01-31 22:28:31 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2020-01-31 22:28:31 +0300
commitc5951e7c8ee5cb04b8b41c32bf567b90117a2124 (patch)
treefae1fde52d66ba050759d85272c62ddc57916061 /drivers/tty
parentb7e573bb4a7a511741f8942b1fb03cfe602ee57f (diff)
parent2c4288719806ca0b3de1b742ada26b25a60d6a45 (diff)
downloadlinux-c5951e7c8ee5cb04b8b41c32bf567b90117a2124.tar.xz
Merge tag 'mips_5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS changes from Paul Burton: "Nothing too big or scary in here: - Support mremap() for the VDSO, primarily to allow CRIU to restore the VDSO to its checkpointed location. - Restore the MIPS32 cBPF JIT, after having reverted the enablement of the eBPF JIT for MIPS32 systems in the 5.5 cycle. - Improve cop0 counter synchronization behaviour whilst onlining CPUs by running with interrupts disabled. - Better match FPU behaviour when emulating multiply-accumulate instructions on pre-r6 systems that implement IEEE754-2008 style MACs. - Loongson64 kernels now build using the MIPS64r2 ISA, allowing them to take advantage of instructions introduced by r2. - Support for the Ingenic X1000 SoC & the really nice little CU Neo development board that's using it. - Support for WMAC on GARDENA Smart Gateway devices. - Lots of cleanup & refactoring of SGI IP27 (Origin 2*) support in preparation for introducing IP35 (Origin 3*) support. - Various Kconfig & Makefile cleanups" * tag 'mips_5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (60 commits) MIPS: PCI: Add detection of IOC3 on IO7, IO8, IO9 and Fuel MIPS: Loongson64: Disable exec hazard MIPS: Loongson64: Bump ISA level to MIPSR2 MIPS: Make DIEI support as a config option MIPS: OCTEON: octeon-irq: fix spelling mistake "to" -> "too" MIPS: asm: local: add barriers for Loongson MIPS: Loongson64: Select mac2008 only feature MIPS: Add MAC2008 Support Revert "MIPS: Add custom serial.h with BASE_BAUD override for generic kernel" MIPS: sort MIPS and MIPS_GENERIC Kconfig selects alphabetically (again) MIPS: make CPU_HAS_LOAD_STORE_LR opt-out MIPS: generic: don't unconditionally select PINCTRL MIPS: don't explicitly select LIBFDT in Kconfig MIPS: sync-r4k: do slave counter synchronization with disabled HW interrupts MIPS: SGI-IP30: Check for valid pointer before using it MIPS: syscalls: fix indentation of the 'SYSNR' message MIPS: boot: fix typo in 'vmlinux.lzma.its' target MIPS: fix indentation of the 'RELOCS' message dt-bindings: Document loongson vendor-prefix MIPS: CU1000-Neo: Refresh defconfig to support HWMON and WiFi. ...
Diffstat (limited to 'drivers/tty')
-rw-r--r--drivers/tty/serial/8250/8250_ioc3.c98
-rw-r--r--drivers/tty/serial/8250/Kconfig11
-rw-r--r--drivers/tty/serial/8250/Makefile1
3 files changed, 110 insertions, 0 deletions
diff --git a/drivers/tty/serial/8250/8250_ioc3.c b/drivers/tty/serial/8250/8250_ioc3.c
new file mode 100644
index 000000000000..4c405f1b9c67
--- /dev/null
+++ b/drivers/tty/serial/8250/8250_ioc3.c
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SGI IOC3 8250 UART driver
+ *
+ * Copyright (C) 2019 Thomas Bogendoerfer <tbogendoerfer@suse.de>
+ *
+ * based on code Copyright (C) 2005 Stanislaw Skowronek <skylark@unaligned.org>
+ * Copyright (C) 2014 Joshua Kinard <kumba@gentoo.org>
+ */
+
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+
+#include "8250.h"
+
+#define IOC3_UARTCLK (22000000 / 3)
+
+struct ioc3_8250_data {
+ int line;
+};
+
+static unsigned int ioc3_serial_in(struct uart_port *p, int offset)
+{
+ return readb(p->membase + (offset ^ 3));
+}
+
+static void ioc3_serial_out(struct uart_port *p, int offset, int value)
+{
+ writeb(value, p->membase + (offset ^ 3));
+}
+
+static int serial8250_ioc3_probe(struct platform_device *pdev)
+{
+ struct ioc3_8250_data *data;
+ struct uart_8250_port up;
+ struct resource *r;
+ void __iomem *membase;
+ int irq, line;
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!r)
+ return -ENODEV;
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ membase = devm_ioremap_nocache(&pdev->dev, r->start, resource_size(r));
+ if (!membase)
+ return -ENOMEM;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ irq = 0; /* no interrupt -> use polling */
+
+ /* Register serial ports with 8250.c */
+ memset(&up, 0, sizeof(struct uart_8250_port));
+ up.port.iotype = UPIO_MEM;
+ up.port.uartclk = IOC3_UARTCLK;
+ up.port.type = PORT_16550A;
+ up.port.irq = irq;
+ up.port.flags = (UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ);
+ up.port.dev = &pdev->dev;
+ up.port.membase = membase;
+ up.port.mapbase = r->start;
+ up.port.serial_in = ioc3_serial_in;
+ up.port.serial_out = ioc3_serial_out;
+ line = serial8250_register_8250_port(&up);
+ if (line < 0)
+ return line;
+
+ platform_set_drvdata(pdev, data);
+ return 0;
+}
+
+static int serial8250_ioc3_remove(struct platform_device *pdev)
+{
+ struct ioc3_8250_data *data = platform_get_drvdata(pdev);
+
+ serial8250_unregister_port(data->line);
+ return 0;
+}
+
+static struct platform_driver serial8250_ioc3_driver = {
+ .probe = serial8250_ioc3_probe,
+ .remove = serial8250_ioc3_remove,
+ .driver = {
+ .name = "ioc3-serial8250",
+ }
+};
+
+module_platform_driver(serial8250_ioc3_driver);
+
+MODULE_AUTHOR("Thomas Bogendoerfer <tbogendoerfer@suse.de>");
+MODULE_DESCRIPTION("SGI IOC3 8250 UART driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index ffd167e886ae..f16824bbb573 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -381,6 +381,17 @@ config SERIAL_8250_EM
port hardware found on the Emma Mobile line of processors.
If unsure, say N.
+config SERIAL_8250_IOC3
+ tristate "SGI IOC3 8250 UART support"
+ depends on SGI_MFD_IOC3 && SERIAL_8250
+ select SERIAL_8250_EXTENDED
+ select SERIAL_8250_SHARE_IRQ
+ help
+ Enable this if you have a SGI Origin or Octane machine. This module
+ provides basic serial support by directly driving the UART chip
+ behind the IOC3 device on those systems. Maximum baud speed is
+ 38400bps using this driver.
+
config SERIAL_8250_RT288X
bool "Ralink RT288x/RT305x/RT3662/RT3883 serial port support"
depends on SERIAL_8250
diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
index 08c1d8117506..51a6079d3f1f 100644
--- a/drivers/tty/serial/8250/Makefile
+++ b/drivers/tty/serial/8250/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_SERIAL_8250_FSL) += 8250_fsl.o
obj-$(CONFIG_SERIAL_8250_MEN_MCB) += 8250_men_mcb.o
obj-$(CONFIG_SERIAL_8250_DW) += 8250_dw.o
obj-$(CONFIG_SERIAL_8250_EM) += 8250_em.o
+obj-$(CONFIG_SERIAL_8250_IOC3) += 8250_ioc3.o
obj-$(CONFIG_SERIAL_8250_OMAP) += 8250_omap.o
obj-$(CONFIG_SERIAL_8250_LPC18XX) += 8250_lpc18xx.o
obj-$(CONFIG_SERIAL_8250_MT6577) += 8250_mtk.o