summaryrefslogtreecommitdiff
path: root/drivers/tty
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2014-04-06 00:51:19 +0400
committerLinus Torvalds <torvalds@linux-foundation.org>2014-04-06 00:51:19 +0400
commitdfc25e4503aef6b82a1de4a0fbe19aafa8648fbe (patch)
tree0a4f3a07e2286918298e635186e42726f4658cbd /drivers/tty
parent9f800363bb0ea459e15bef0928a72c88d374e489 (diff)
parent8f881c67368f82d0e20e1072b50b21132cc2440d (diff)
downloadlinux-dfc25e4503aef6b82a1de4a0fbe19aafa8648fbe.tar.xz
Merge tag 'cleanup-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC cleanups from Arnd Bergmann: "These cleanup patches are mainly move stuff around and should all be harmless. They are mainly split out so that other branches can be based on top to avoid conflicts. Notable changes are: - We finally remove all mach/timex.h, after CLOCK_TICK_RATE is no longer used (Uwe Kleine-König) - The Qualcomm MSM platform is split out into legacy mach-msm and new-style mach-qcom, to allow easier maintainance of the new hardware support without regressions (Kumar Gala) - A rework of some of the Kconfig logic to simplify multiplatform support (Rob Herring) - Samsung Exynos gets closer to supporting multiplatform (Sachin Kamat and others) - mach-bcm3528 gets merged into mach-bcm (Stephen Warren) - at91 gains some common clock framework support (Alexandre Belloni, Jean-Jacques Hiblot and other French people)" * tag 'cleanup-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (89 commits) ARM: hisi: select HAVE_ARM_SCU only for SMP ARM: efm32: allow uncompress debug output ARM: prima2: build reset code standalone ARM: at91: add PWM clock ARM: at91: move sam9261 SoC to common clk ARM: at91: prepare common clk transition for sam9261 SoC ARM: at91: updated the at91_dt_defconfig with support for the ADS7846 ARM: at91: dt: sam9261: Device Tree support for the at91sam9261ek ARM: at91: dt: defconfig: Added the sam9261 to the list of DT-enabled SOCs ARM: at91: dt: Add at91sam9261 dt SoC support ARM: at91: switch sam9rl to common clock framework ARM: at91/dt: define main clk frequency of at91sam9rlek ARM: at91/dt: define at91sam9rl clocks ARM: at91: prepare common clk transition for sam9rl SoCs ARM: at91: prepare sam9 dt boards transition to common clk ARM: at91: dt: sam9rl: Device Tree for the at91sam9rlek ARM: at91/defconfig: Add the sam9rl to the list of DT-enabled SOCs ARM: at91: Add at91sam9rl DT SoC support ARM: at91: prepare at91sam9rl DT transition ARM: at91/defconfig: refresh at91sam9260_9g20_defconfig ...
Diffstat (limited to 'drivers/tty')
-rw-r--r--drivers/tty/serial/atmel_serial.c49
1 files changed, 31 insertions, 18 deletions
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index b0603e1f7d82..53eeea13ff16 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -35,21 +35,18 @@
#include <linux/platform_device.h>
#include <linux/of.h>
#include <linux/of_device.h>
+#include <linux/of_gpio.h>
#include <linux/dma-mapping.h>
#include <linux/atmel_pdc.h>
#include <linux/atmel_serial.h>
#include <linux/uaccess.h>
#include <linux/platform_data/atmel.h>
#include <linux/timer.h>
+#include <linux/gpio.h>
#include <asm/io.h>
#include <asm/ioctls.h>
-#ifdef CONFIG_ARM
-#include <mach/cpu.h>
-#include <asm/gpio.h>
-#endif
-
#define PDC_BUFFER_SIZE 512
/* Revisit: We should calculate this based on the actual port settings */
#define PDC_RX_TIMEOUT (3 * 10) /* 3 bytes */
@@ -165,6 +162,7 @@ struct atmel_uart_port {
struct circ_buf rx_ring;
struct serial_rs485 rs485; /* rs485 settings */
+ int rts_gpio; /* optional RTS GPIO */
unsigned int tx_done_mask;
bool is_usart; /* usart or uart */
struct timer_list uart_timer; /* uart timer */
@@ -298,20 +296,16 @@ static void atmel_set_mctrl(struct uart_port *port, u_int mctrl)
unsigned int mode;
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
-#ifdef CONFIG_ARCH_AT91RM9200
- if (cpu_is_at91rm9200()) {
- /*
- * AT91RM9200 Errata #39: RTS0 is not internally connected
- * to PA21. We need to drive the pin manually.
- */
- if (port->mapbase == AT91RM9200_BASE_US0) {
- if (mctrl & TIOCM_RTS)
- at91_set_gpio_value(AT91_PIN_PA21, 0);
- else
- at91_set_gpio_value(AT91_PIN_PA21, 1);
- }
+ /*
+ * AT91RM9200 Errata #39: RTS0 is not internally connected
+ * to PA21. We need to drive the pin as a GPIO.
+ */
+ if (gpio_is_valid(atmel_port->rts_gpio)) {
+ if (mctrl & TIOCM_RTS)
+ gpio_set_value(atmel_port->rts_gpio, 0);
+ else
+ gpio_set_value(atmel_port->rts_gpio, 1);
}
-#endif
if (mctrl & TIOCM_RTS)
control |= ATMEL_US_RTSEN;
@@ -2365,6 +2359,25 @@ static int atmel_serial_probe(struct platform_device *pdev)
port = &atmel_ports[ret];
port->backup_imr = 0;
port->uart.line = ret;
+ port->rts_gpio = -EINVAL; /* Invalid, zero could be valid */
+ if (pdata)
+ port->rts_gpio = pdata->rts_gpio;
+ else if (np)
+ port->rts_gpio = of_get_named_gpio(np, "rts-gpios", 0);
+
+ if (gpio_is_valid(port->rts_gpio)) {
+ ret = devm_gpio_request(&pdev->dev, port->rts_gpio, "RTS");
+ if (ret) {
+ dev_err(&pdev->dev, "error requesting RTS GPIO\n");
+ goto err;
+ }
+ /* Default to 1 as RTS is active low */
+ ret = gpio_direction_output(port->rts_gpio, 1);
+ if (ret) {
+ dev_err(&pdev->dev, "error setting up RTS GPIO\n");
+ goto err;
+ }
+ }
ret = atmel_init_port(port, pdev);
if (ret)