summaryrefslogtreecommitdiff
path: root/drivers/uio
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-01-12 06:50:26 +0400
committerLinus Torvalds <torvalds@linux-foundation.org>2012-01-12 06:50:26 +0400
commit7b67e751479d50b7f84d1a3cc5216eed5e534b66 (patch)
treea1a6746857cf65f04dde739fe271bf4143d55eaf /drivers/uio
parent9f13a1fd452f11c18004ba2422a6384b424ec8a9 (diff)
parent76ccc297018d25d55b789bbd508861ef1e2cdb0c (diff)
downloadlinux-7b67e751479d50b7f84d1a3cc5216eed5e534b66.tar.xz
Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci: (80 commits) x86/PCI: Expand the x86_msi_ops to have a restore MSIs. PCI: Increase resource array mask bit size in pcim_iomap_regions() PCI: DEVICE_COUNT_RESOURCE should be equal to PCI_NUM_RESOURCES PCI: pci_ids: add device ids for STA2X11 device (aka ConneXT) PNP: work around Dell 1536/1546 BIOS MMCONFIG bug that breaks USB x86/PCI: amd: factor out MMCONFIG discovery PCI: Enable ATS at the device state restore PCI: msi: fix imbalanced refcount of msi irq sysfs objects PCI: kconfig: English typo in pci/pcie/Kconfig PCI/PM/Runtime: make PCI traces quieter PCI: remove pci_create_bus() xtensa/PCI: convert to pci_scan_root_bus() for correct root bus resources x86/PCI: convert to pci_create_root_bus() and pci_scan_root_bus() x86/PCI: use pci_scan_bus() instead of pci_scan_bus_parented() x86/PCI: read Broadcom CNB20LE host bridge info before PCI scan sparc32, leon/PCI: convert to pci_scan_root_bus() for correct root bus resources sparc/PCI: convert to pci_create_root_bus() sh/PCI: convert to pci_scan_root_bus() for correct root bus resources powerpc/PCI: convert to pci_create_root_bus() powerpc/PCI: split PHB part out of pcibios_map_io_space() ... Fix up conflicts in drivers/pci/msi.c and include/linux/pci_regs.h due to the same patches being applied in other branches.
Diffstat (limited to 'drivers/uio')
-rw-r--r--drivers/uio/uio_pci_generic.c78
1 files changed, 7 insertions, 71 deletions
diff --git a/drivers/uio/uio_pci_generic.c b/drivers/uio/uio_pci_generic.c
index 02bd47bdee1c..0bd08ef2b394 100644
--- a/drivers/uio/uio_pci_generic.c
+++ b/drivers/uio/uio_pci_generic.c
@@ -45,77 +45,12 @@ to_uio_pci_generic_dev(struct uio_info *info)
static irqreturn_t irqhandler(int irq, struct uio_info *info)
{
struct uio_pci_generic_dev *gdev = to_uio_pci_generic_dev(info);
- struct pci_dev *pdev = gdev->pdev;
- irqreturn_t ret = IRQ_NONE;
- u32 cmd_status_dword;
- u16 origcmd, newcmd, status;
-
- /* We do a single dword read to retrieve both command and status.
- * Document assumptions that make this possible. */
- BUILD_BUG_ON(PCI_COMMAND % 4);
- BUILD_BUG_ON(PCI_COMMAND + 2 != PCI_STATUS);
-
- pci_block_user_cfg_access(pdev);
-
- /* Read both command and status registers in a single 32-bit operation.
- * Note: we could cache the value for command and move the status read
- * out of the lock if there was a way to get notified of user changes
- * to command register through sysfs. Should be good for shared irqs. */
- pci_read_config_dword(pdev, PCI_COMMAND, &cmd_status_dword);
- origcmd = cmd_status_dword;
- status = cmd_status_dword >> 16;
-
- /* Check interrupt status register to see whether our device
- * triggered the interrupt. */
- if (!(status & PCI_STATUS_INTERRUPT))
- goto done;
-
- /* We triggered the interrupt, disable it. */
- newcmd = origcmd | PCI_COMMAND_INTX_DISABLE;
- if (newcmd != origcmd)
- pci_write_config_word(pdev, PCI_COMMAND, newcmd);
- /* UIO core will signal the user process. */
- ret = IRQ_HANDLED;
-done:
-
- pci_unblock_user_cfg_access(pdev);
- return ret;
-}
+ if (!pci_check_and_mask_intx(gdev->pdev))
+ return IRQ_NONE;
-/* Verify that the device supports Interrupt Disable bit in command register,
- * per PCI 2.3, by flipping this bit and reading it back: this bit was readonly
- * in PCI 2.2. */
-static int __devinit verify_pci_2_3(struct pci_dev *pdev)
-{
- u16 orig, new;
- int err = 0;
-
- pci_block_user_cfg_access(pdev);
- pci_read_config_word(pdev, PCI_COMMAND, &orig);
- pci_write_config_word(pdev, PCI_COMMAND,
- orig ^ PCI_COMMAND_INTX_DISABLE);
- pci_read_config_word(pdev, PCI_COMMAND, &new);
- /* There's no way to protect against
- * hardware bugs or detect them reliably, but as long as we know
- * what the value should be, let's go ahead and check it. */
- if ((new ^ orig) & ~PCI_COMMAND_INTX_DISABLE) {
- err = -EBUSY;
- dev_err(&pdev->dev, "Command changed from 0x%x to 0x%x: "
- "driver or HW bug?\n", orig, new);
- goto err;
- }
- if (!((new ^ orig) & PCI_COMMAND_INTX_DISABLE)) {
- dev_warn(&pdev->dev, "Device does not support "
- "disabling interrupts: unable to bind.\n");
- err = -ENODEV;
- goto err;
- }
- /* Now restore the original value. */
- pci_write_config_word(pdev, PCI_COMMAND, orig);
-err:
- pci_unblock_user_cfg_access(pdev);
- return err;
+ /* UIO core will signal the user process. */
+ return IRQ_HANDLED;
}
static int __devinit probe(struct pci_dev *pdev,
@@ -138,9 +73,10 @@ static int __devinit probe(struct pci_dev *pdev,
return -ENODEV;
}
- err = verify_pci_2_3(pdev);
- if (err)
+ if (!pci_intx_mask_supported(pdev)) {
+ err = -ENODEV;
goto err_verify;
+ }
gdev = kzalloc(sizeof(struct uio_pci_generic_dev), GFP_KERNEL);
if (!gdev) {