Merge tag 'usb-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

USB: Changes for v5.4 merge window

With only 45 non-merge commits, we have a small merge window from the
Gadget perspective.

The biggest change here is the addition of the Cadence USB3 DRD
Driver. All other changes are small, non-critical fixes or smaller new
features like the improvement to BESL handling in dwc3.

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

* tag 'usb-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (45 commits)
  usb: gadget: net2280: Add workaround for AB chip Errata 11
  usb: gadget: net2280: Move all "ll" registers in one structure
  usb: dwc3: gadget: Workaround Mirosoft's BESL check
  usb:cdns3 Fix for stuck packets in on-chip OUT buffer.
  usb: cdns3: Add Cadence USB3 DRD Driver
  usb: common: Simplify usb_decode_get_set_descriptor function.
  usb: common: Patch simplify usb_decode_set_clear_feature function.
  usb: common: Separated decoding functions from dwc3 driver.
  dt-bindings: add binding for USBSS-DRD controller.
  usb: gadget: composite: Set recommended BESL values
  usb: dwc3: gadget: Set BESL config parameter
  usb: dwc3: Separate field holding multiple properties
  usb: gadget: Export recommended BESL values
  usb: phy: phy-fsl-usb: Make structure fsl_otg_initdata constant
  usb: udc: lpc32xx: silence fall-through warning
  usb: dwc3: meson-g12a: fix suspend resume regulator unbalanced disables
  usb: udc: lpc32xx: remove set but not used 3 variables
  usb: gadget: udc: core: Fix segfault if udc_bind_to_driver() for pending driver fails
  usb: dwc3: st: Add of_dev_put() in probe function
  usb: dwc3: st: Add of_node_put() before return in probe function
  ...

1 files changed, 22 insertions, 2 deletions

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 173f5329d3d9..8adb59f8e4f1 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2078,6 +2078,26 @@ static void dwc3_gadget_config_params(struct usb_gadget *g,
 {
 	struct dwc3		*dwc = gadget_to_dwc(g);
 
+	params->besl_baseline = USB_DEFAULT_BESL_UNSPECIFIED;
+	params->besl_deep = USB_DEFAULT_BESL_UNSPECIFIED;
+
+	/* Recommended BESL */
+	if (!dwc->dis_enblslpm_quirk) {
+		/*
+		 * If the recommended BESL baseline is 0 or if the BESL deep is
+		 * less than 2, Microsoft's Windows 10 host usb stack will issue
+		 * a usb reset immediately after it receives the extended BOS
+		 * descriptor and the enumeration will fail. To maintain
+		 * compatibility with the Windows' usb stack, let's set the
+		 * recommended BESL baseline to 1 and clamp the BESL deep to be
+		 * within 2 to 15.
+		 */
+		params->besl_baseline = 1;
+		if (dwc->is_utmi_l1_suspend)
+			params->besl_deep =
+				clamp_t(u8, dwc->hird_threshold, 2, 15);
+	}
+
 	/* U1 Device exit Latency */
 	if (dwc->dis_u1_entry_quirk)
 		params->bU1devExitLat = 0;
@@ -2868,7 +2888,8 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
 		reg = dwc3_readl(dwc->regs, DWC3_DCTL);
 		reg &= ~(DWC3_DCTL_HIRD_THRES_MASK | DWC3_DCTL_L1_HIBER_EN);
 
-		reg |= DWC3_DCTL_HIRD_THRES(dwc->hird_threshold);
+		reg |= DWC3_DCTL_HIRD_THRES(dwc->hird_threshold |
+					    (dwc->is_utmi_l1_suspend << 4));
 
 		/*
 		 * When dwc3 revisions >= 2.40a, LPM Erratum is enabled and
@@ -3318,7 +3339,6 @@ int dwc3_gadget_init(struct dwc3 *dwc)
 	dwc->gadget.speed		= USB_SPEED_UNKNOWN;
 	dwc->gadget.sg_supported	= true;
 	dwc->gadget.name		= "dwc3-gadget";
-	dwc->gadget.is_otg		= dwc->dr_mode == USB_DR_MODE_OTG;
 	dwc->gadget.lpm_capable		= true;
 
 	/*