Merge tag 'usb-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB updates from Greg KH:
 "Here's the big USB pull request for 3.14-rc1

  Lots of little things all over the place, and the usual USB gadget
  updates, and XHCI fixes (some for an issue reported by a lot of
  people).  USB PHY updates as well as chipidea updates and fixes.

  All of these have been in the linux-next tree with no reported issues"

* tag 'usb-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (318 commits)
  usb: chipidea: udc: using MultO at TD as real mult value for ISO-TX
  usb: chipidea: need to mask INT_STATUS when write otgsc
  usb: chipidea: put hw_phymode_configure before ci_usb_phy_init
  usb: chipidea: Fix Internal error: : 808 [#1] ARM related to STS flag
  usb: chipidea: imx: set CI_HDRC_IMX28_WRITE_FIX for imx28
  usb: chipidea: add freescale imx28 special write register method
  usb: ehci: add freescale imx28 special write register method
  usb: core: check for valid id_table when using the RefId feature
  usb: cdc-wdm: resp_count can be 0 even if WDM_READ is set
  usb: core: bail out if user gives an unknown RefId when using new_id
  usb: core: allow a reference device for new_id
  usb: core: add sanity checks when using bInterfaceClass with new_id
  USB: image: correct spelling mistake in comment
  USB: c67x00: correct spelling mistakes in comments
  usb: delete non-required instances of include <linux/init.h>
  usb:hub set hub->change_bits when over-current happens
  Revert "usb: chipidea: imx: set CI_HDRC_IMX28_WRITE_FIX for imx28"
  xhci: Set scatter-gather limit to avoid failed block writes.
  xhci: Avoid infinite loop when sg urb requires too many trbs
  usb: gadget: remove unused variable in gr_queue_int()
  ...

1 files changed, 10 insertions, 8 deletions

diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c
index 54a1e2954cea..41b062eb4de0 100644
--- a/drivers/usb/gadget/amd5536udc.c
+++ b/drivers/usb/gadget/amd5536udc.c
@@ -40,7 +40,6 @@
 #include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/errno.h>
-#include <linux/init.h>
 #include <linux/timer.h>
 #include <linux/list.h>
 #include <linux/interrupt.h>
@@ -446,7 +445,7 @@ static void ep_init(struct udc_regs __iomem *regs, struct udc_ep *ep)
 	ep->ep.ops = &udc_ep_ops;
 	INIT_LIST_HEAD(&ep->queue);
 
-	ep->ep.maxpacket = (u16) ~0;
+	usb_ep_set_maxpacket_limit(&ep->ep,(u16) ~0);
 	/* set NAK */
 	tmp = readl(&ep->regs->ctl);
 	tmp |= AMD_BIT(UDC_EPCTL_SNAK);
@@ -1564,12 +1563,15 @@ static void udc_setup_endpoints(struct udc *dev)
 	}
 	/* EP0 max packet */
 	if (dev->gadget.speed == USB_SPEED_FULL) {
-		dev->ep[UDC_EP0IN_IX].ep.maxpacket = UDC_FS_EP0IN_MAX_PKT_SIZE;
-		dev->ep[UDC_EP0OUT_IX].ep.maxpacket =
-						UDC_FS_EP0OUT_MAX_PKT_SIZE;
+		usb_ep_set_maxpacket_limit(&dev->ep[UDC_EP0IN_IX].ep,
+					   UDC_FS_EP0IN_MAX_PKT_SIZE);
+		usb_ep_set_maxpacket_limit(&dev->ep[UDC_EP0OUT_IX].ep,
+					   UDC_FS_EP0OUT_MAX_PKT_SIZE);
 	} else if (dev->gadget.speed == USB_SPEED_HIGH) {
-		dev->ep[UDC_EP0IN_IX].ep.maxpacket = UDC_EP0IN_MAX_PKT_SIZE;
-		dev->ep[UDC_EP0OUT_IX].ep.maxpacket = UDC_EP0OUT_MAX_PKT_SIZE;
+		usb_ep_set_maxpacket_limit(&dev->ep[UDC_EP0IN_IX].ep,
+					   UDC_EP0IN_MAX_PKT_SIZE);
+		usb_ep_set_maxpacket_limit(&dev->ep[UDC_EP0OUT_IX].ep,
+					   UDC_EP0OUT_MAX_PKT_SIZE);
 	}
 
 	/*
@@ -3338,7 +3340,7 @@ static int udc_remote_wakeup(struct udc *dev)
 }
 
 /* PCI device parameters */
-static DEFINE_PCI_DEVICE_TABLE(pci_id) = {
+static const struct pci_device_id pci_id[] = {
 	{
 		PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x2096),
 		.class =	(PCI_CLASS_SERIAL_USB << 8) | 0xfe,