Merge tag 'usb-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB updates from Greg KH:
 "Here is the big set of USB patches for 5.4-rc1.

  Two major chunks of code are moving out of the tree and into the
  staging directory, uwb and wusb (wireless USB support), because there
  are no devices that actually use this protocol anymore, and what we
  have today probably doesn't work at all given that the maintainers
  left many many years ago. So move it to staging where it will be
  removed in a few releases if no one screams.

  Other than that, lots of little things. The usual gadget and xhci and
  usb serial driver updates, along with a bunch of sysfs file cleanups
  due to the driver core changes to support that. Nothing really major,
  just constant forward progress.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (159 commits)
  USB: usbcore: Fix slab-out-of-bounds bug during device reset
  usb: cdns3: Remove redundant dev_err call in cdns3_probe()
  USB: rio500: Fix lockdep violation
  USB: rio500: simplify locking
  usb: mtu3: register a USB Role Switch for dual role mode
  usb: common: add USB GPIO based connection detection driver
  usb: common: create Kconfig file
  usb: roles: get usb-role-switch from parent
  usb: roles: Add fwnode_usb_role_switch_get() function
  device connection: Add fwnode_connection_find_match()
  usb: roles: Introduce stubs for the exiting functions in role.h
  dt-bindings: usb: mtu3: add properties about USB Role Switch
  dt-bindings: usb: add binding for USB GPIO based connection detection driver
  dt-bindings: connector: add optional properties for Type-B
  dt-binding: usb: add usb-role-switch property
  usbip: Implement SG support to vhci-hcd and stub driver
  usb: roles: intel: Enable static DRD mode for role switch
  xhci-ext-caps.c: Add property to disable Intel SW switch
  usb: dwc3: remove generic PHY calibrate() calls
  usb: core: phy: add support for PHY calibration
  ...

1 files changed, 4 insertions, 10 deletions

diff --git a/drivers/usb/gadget/udc/lpc32xx_udc.c b/drivers/usb/gadget/udc/lpc32xx_udc.c
index c65aed3e84c7..b3e073fb88c6 100644
--- a/drivers/usb/gadget/udc/lpc32xx_udc.c
+++ b/drivers/usb/gadget/udc/lpc32xx_udc.c
@@ -741,7 +741,6 @@ static inline void udc_protocol_cmd_data_w(struct lpc32xx_udc *udc, u32 cmd,
  * response data */
 static u32 udc_protocol_cmd_r(struct lpc32xx_udc *udc, u32 cmd)
 {
-	u32 tmp;
 	int to = 1000;
 
 	/* Write a command and read data from the protocol engine */
@@ -751,7 +750,6 @@ static u32 udc_protocol_cmd_r(struct lpc32xx_udc *udc, u32 cmd)
 	/* Write command code */
 	udc_protocol_cmd_w(udc, cmd);
 
-	tmp = readl(USBD_DEVINTST(udc->udp_baseaddr));
 	while ((!(readl(USBD_DEVINTST(udc->udp_baseaddr)) & USBD_CDFULL))
 	       && (to > 0))
 		to--;
@@ -1991,7 +1989,7 @@ void udc_handle_eps(struct lpc32xx_udc *udc, struct lpc32xx_ep *ep)
 /* DMA end of transfer completion */
 static void udc_handle_dma_ep(struct lpc32xx_udc *udc, struct lpc32xx_ep *ep)
 {
-	u32 status, epstatus;
+	u32 status;
 	struct lpc32xx_request *req;
 	struct lpc32xx_usbd_dd_gad *dd;
 
@@ -2085,7 +2083,7 @@ static void udc_handle_dma_ep(struct lpc32xx_udc *udc, struct lpc32xx_ep *ep)
 		if (udc_clearep_getsts(udc, ep->hwep_num) & EP_SEL_F) {
 			udc_clearep_getsts(udc, ep->hwep_num);
 			uda_enable_hwepint(udc, ep->hwep_num);
-			epstatus = udc_clearep_getsts(udc, ep->hwep_num);
+			udc_clearep_getsts(udc, ep->hwep_num);
 
 			/* Let the EP interrupt handle the ZLP */
 			return;
@@ -2197,7 +2195,7 @@ static void udc_handle_ep0_setup(struct lpc32xx_udc *udc)
 	struct lpc32xx_ep *ep, *ep0 = &udc->ep[0];
 	struct usb_ctrlrequest ctrlpkt;
 	int i, bytes;
-	u16 wIndex, wValue, wLength, reqtype, req, tmp;
+	u16 wIndex, wValue, reqtype, req, tmp;
 
 	/* Nuke previous transfers */
 	nuke(ep0, -EPROTO);
@@ -2213,7 +2211,6 @@ static void udc_handle_ep0_setup(struct lpc32xx_udc *udc)
 	/* Native endianness */
 	wIndex = le16_to_cpu(ctrlpkt.wIndex);
 	wValue = le16_to_cpu(ctrlpkt.wValue);
-	wLength = le16_to_cpu(ctrlpkt.wLength);
 	reqtype = le16_to_cpu(ctrlpkt.bRequestType);
 
 	/* Set direction of EP0 */
@@ -3060,11 +3057,8 @@ static int lpc32xx_udc_probe(struct platform_device *pdev)
 	/* Get IRQs */
 	for (i = 0; i < 4; i++) {
 		udc->udp_irq[i] = platform_get_irq(pdev, i);
-		if (udc->udp_irq[i] < 0) {
-			dev_err(udc->dev,
-				"irq resource %d not available!\n", i);
+		if (udc->udp_irq[i] < 0)
 			return udc->udp_irq[i];
-		}
 	}
 
 	udc->udp_baseaddr = devm_ioremap_resource(dev, res);