summaryrefslogtreecommitdiff
path: root/drivers/usb/host/ehci-omap.c
diff options
context:
space:
mode:
authorAlan Stern <stern@rowland.harvard.edu>2012-07-09 23:55:14 +0400
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2012-07-10 00:35:05 +0400
commit1a49e2ac9651df7349867a5cf44e2c83de1046af (patch)
treeb4ba01d645073947dcf8bbe1972b7af740031b5b /drivers/usb/host/ehci-omap.c
parent1530280084c3905be6fce802cbfa83fb3bbb8839 (diff)
downloadlinux-1a49e2ac9651df7349867a5cf44e2c83de1046af.tar.xz
EHCI: centralize controller initialization
This patch (as1564c) converts the EHCI platform drivers to use the central ehci_setup() routine for generic controller initialization rather than each having its own idiosyncratic approach. The major point of difficulty lies in ehci-pci's many vendor- and device-specific workarounds. Some of them have to be applied before calling ehci_setup() and some after, which necessitates a fair amount of code motion. The other platform drivers require much smaller changes. One point not addressed by the patch is whether ports should be powered on or off following initialization. The different drivers appear to handle this pretty much at random. In fact it shouldn't matter, because the hub driver turns on power to all ports when it binds to the root hub. Straightening that out will be left for another day. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/usb/host/ehci-omap.c')
-rw-r--r--drivers/usb/host/ehci-omap.c104
1 files changed, 51 insertions, 53 deletions
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index 6e15fc87cf60..6133d93808dc 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -145,6 +145,56 @@ static void omap_ehci_soft_phy_reset(struct platform_device *pdev, u8 port)
}
}
+static int omap_ehci_init(struct usb_hcd *hcd)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+ int rc;
+ struct ehci_hcd_omap_platform_data *pdata;
+
+ pdata = hcd->self.controller->platform_data;
+ if (pdata->phy_reset) {
+ if (gpio_is_valid(pdata->reset_gpio_port[0]))
+ gpio_request_one(pdata->reset_gpio_port[0],
+ GPIOF_OUT_INIT_LOW, "USB1 PHY reset");
+
+ if (gpio_is_valid(pdata->reset_gpio_port[1]))
+ gpio_request_one(pdata->reset_gpio_port[1],
+ GPIOF_OUT_INIT_LOW, "USB2 PHY reset");
+
+ /* Hold the PHY in RESET for enough time till DIR is high */
+ udelay(10);
+ }
+
+ /* Soft reset the PHY using PHY reset command over ULPI */
+ if (pdata->port_mode[0] == OMAP_EHCI_PORT_MODE_PHY)
+ omap_ehci_soft_phy_reset(pdev, 0);
+ if (pdata->port_mode[1] == OMAP_EHCI_PORT_MODE_PHY)
+ omap_ehci_soft_phy_reset(pdev, 1);
+
+ /* we know this is the memory we want, no need to ioremap again */
+ ehci->caps = hcd->regs;
+
+ rc = ehci_setup(hcd);
+
+ if (pdata->phy_reset) {
+ /* Hold the PHY in RESET for enough time till
+ * PHY is settled and ready
+ */
+ udelay(10);
+
+ if (gpio_is_valid(pdata->reset_gpio_port[0]))
+ gpio_set_value_cansleep(pdata->reset_gpio_port[0], 1);
+
+ if (gpio_is_valid(pdata->reset_gpio_port[1]))
+ gpio_set_value_cansleep(pdata->reset_gpio_port[1], 1);
+ }
+
+ /* root ports should always stay powered */
+ ehci_port_power(ehci, 1);
+
+ return rc;
+}
+
static int omap_ehci_hub_control(
struct usb_hcd *hcd,
u16 typeReq,
@@ -219,7 +269,6 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
struct resource *res;
struct usb_hcd *hcd;
void __iomem *regs;
- struct ehci_hcd *omap_ehci;
int ret = -ENODEV;
int irq;
int i;
@@ -281,19 +330,6 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
}
}
- if (pdata->phy_reset) {
- if (gpio_is_valid(pdata->reset_gpio_port[0]))
- gpio_request_one(pdata->reset_gpio_port[0],
- GPIOF_OUT_INIT_LOW, "USB1 PHY reset");
-
- if (gpio_is_valid(pdata->reset_gpio_port[1]))
- gpio_request_one(pdata->reset_gpio_port[1],
- GPIOF_OUT_INIT_LOW, "USB2 PHY reset");
-
- /* Hold the PHY in RESET for enough time till DIR is high */
- udelay(10);
- }
-
pm_runtime_enable(dev);
pm_runtime_get_sync(dev);
@@ -309,50 +345,12 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
ehci_write(regs, EHCI_INSNREG04,
EHCI_INSNREG04_DISABLE_UNSUSPEND);
- /* Soft reset the PHY using PHY reset command over ULPI */
- if (pdata->port_mode[0] == OMAP_EHCI_PORT_MODE_PHY)
- omap_ehci_soft_phy_reset(pdev, 0);
- if (pdata->port_mode[1] == OMAP_EHCI_PORT_MODE_PHY)
- omap_ehci_soft_phy_reset(pdev, 1);
-
- omap_ehci = hcd_to_ehci(hcd);
- omap_ehci->sbrn = 0x20;
-
- /* we know this is the memory we want, no need to ioremap again */
- omap_ehci->caps = hcd->regs;
- omap_ehci->regs = hcd->regs
- + HC_LENGTH(ehci, readl(&omap_ehci->caps->hc_capbase));
-
- dbg_hcs_params(omap_ehci, "reset");
- dbg_hcc_params(omap_ehci, "reset");
-
- /* cache this readonly data; minimize chip reads */
- omap_ehci->hcs_params = readl(&omap_ehci->caps->hcs_params);
-
- ehci_reset(omap_ehci);
-
- if (pdata->phy_reset) {
- /* Hold the PHY in RESET for enough time till
- * PHY is settled and ready
- */
- udelay(10);
-
- if (gpio_is_valid(pdata->reset_gpio_port[0]))
- gpio_set_value_cansleep(pdata->reset_gpio_port[0], 1);
-
- if (gpio_is_valid(pdata->reset_gpio_port[1]))
- gpio_set_value_cansleep(pdata->reset_gpio_port[1], 1);
- }
-
ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
if (ret) {
dev_err(dev, "failed to add hcd with err %d\n", ret);
goto err_pm_runtime;
}
- /* root ports should always stay powered */
- ehci_port_power(omap_ehci, 1);
-
/* get clocks */
utmi_p1_fck = clk_get(dev, "utmi_p1_gfclk");
if (IS_ERR(utmi_p1_fck)) {
@@ -512,7 +510,7 @@ static const struct hc_driver ehci_omap_hc_driver = {
/*
* basic lifecycle operations
*/
- .reset = ehci_init,
+ .reset = omap_ehci_init,
.start = ehci_run,
.stop = ehci_stop,
.shutdown = ehci_shutdown,