summaryrefslogtreecommitdiff
path: root/drivers/usb/host/ohci-at91.c
diff options
context:
space:
mode:
authorWenyou Yang <wenyou.yang@atmel.com>2016-09-29 12:59:02 +0300
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2016-10-24 16:17:51 +0300
commit054d4b7b577de6f5d25a0d443f0d59410bf156ad (patch)
tree2d4b1d96b826154153f5d3722db5721434898eeb /drivers/usb/host/ohci-at91.c
parent629dd219881a6d9643806acf4f0166501f4c3374 (diff)
downloadlinux-054d4b7b577de6f5d25a0d443f0d59410bf156ad.tar.xz
usb: ohci-at91: Use descriptor-based gpio APIs
Use the descriptor-based interface to manipulate GPIOs, instead of the legacy integer-based interface. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/usb/host/ohci-at91.c')
-rw-r--r--drivers/usb/host/ohci-at91.c121
1 files changed, 31 insertions, 90 deletions
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index 5b5880c0ae19..2ebea306151d 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -14,8 +14,8 @@
#include <linux/clk.h>
#include <linux/dma-mapping.h>
+#include <linux/gpio/consumer.h>
#include <linux/of_platform.h>
-#include <linux/of_gpio.h>
#include <linux/platform_device.h>
#include <linux/platform_data/atmel.h>
#include <linux/io.h>
@@ -39,8 +39,8 @@
#define AT91_MAX_USBH_PORTS 3
struct at91_usbh_data {
- int vbus_pin[AT91_MAX_USBH_PORTS]; /* port power-control pin */
- int overcurrent_pin[AT91_MAX_USBH_PORTS];
+ struct gpio_desc *vbus_pin[AT91_MAX_USBH_PORTS];
+ struct gpio_desc *overcurrent_pin[AT91_MAX_USBH_PORTS];
u8 ports; /* number of ports on root hub */
u8 overcurrent_supported;
u8 vbus_pin_active_low[AT91_MAX_USBH_PORTS];
@@ -262,11 +262,8 @@ static void ohci_at91_usb_set_power(struct at91_usbh_data *pdata, int port, int
if (!valid_port(port))
return;
- if (!gpio_is_valid(pdata->vbus_pin[port]))
- return;
-
- gpio_set_value(pdata->vbus_pin[port],
- pdata->vbus_pin_active_low[port] ^ enable);
+ gpiod_set_value(pdata->vbus_pin[port],
+ pdata->vbus_pin_active_low[port] ^ enable);
}
static int ohci_at91_usb_get_power(struct at91_usbh_data *pdata, int port)
@@ -274,11 +271,8 @@ static int ohci_at91_usb_get_power(struct at91_usbh_data *pdata, int port)
if (!valid_port(port))
return -EINVAL;
- if (!gpio_is_valid(pdata->vbus_pin[port]))
- return -EINVAL;
-
- return gpio_get_value(pdata->vbus_pin[port]) ^
- pdata->vbus_pin_active_low[port];
+ return gpiod_get_value(pdata->vbus_pin[port]) ^
+ pdata->vbus_pin_active_low[port];
}
/*
@@ -468,16 +462,13 @@ static irqreturn_t ohci_hcd_at91_overcurrent_irq(int irq, void *data)
{
struct platform_device *pdev = data;
struct at91_usbh_data *pdata = dev_get_platdata(&pdev->dev);
- int val, gpio, port;
+ int val, port;
/* From the GPIO notifying the over-current situation, find
* out the corresponding port */
at91_for_each_port(port) {
- if (gpio_is_valid(pdata->overcurrent_pin[port]) &&
- gpio_to_irq(pdata->overcurrent_pin[port]) == irq) {
- gpio = pdata->overcurrent_pin[port];
+ if (gpiod_to_irq(pdata->overcurrent_pin[port]) == irq)
break;
- }
}
if (port == AT91_MAX_USBH_PORTS) {
@@ -485,7 +476,7 @@ static irqreturn_t ohci_hcd_at91_overcurrent_irq(int irq, void *data)
return IRQ_HANDLED;
}
- val = gpio_get_value(gpio);
+ val = gpiod_get_value(pdata->overcurrent_pin[port]);
/* When notified of an over-current situation, disable power
on the corresponding port, and mark this port in
@@ -516,9 +507,8 @@ static int ohci_hcd_at91_drv_probe(struct platform_device *pdev)
struct device_node *np = pdev->dev.of_node;
struct at91_usbh_data *pdata;
int i;
- int gpio;
int ret;
- enum of_gpio_flags flags;
+ int err;
u32 ports;
/* Right now device-tree probed devices don't get dma_mask set.
@@ -539,38 +529,16 @@ static int ohci_hcd_at91_drv_probe(struct platform_device *pdev)
pdata->ports = ports;
at91_for_each_port(i) {
- /*
- * do not configure PIO if not in relation with
- * real USB port on board
- */
- if (i >= pdata->ports) {
- pdata->vbus_pin[i] = -EINVAL;
- pdata->overcurrent_pin[i] = -EINVAL;
+ pdata->vbus_pin[i] = devm_gpiod_get_optional(&pdev->dev,
+ "atmel,vbus-gpio",
+ GPIOD_IN);
+ if (IS_ERR(pdata->vbus_pin[i])) {
+ err = PTR_ERR(pdata->vbus_pin[i]);
+ dev_err(&pdev->dev, "unable to claim gpio \"vbus\": %d\n", err);
continue;
}
- gpio = of_get_named_gpio_flags(np, "atmel,vbus-gpio", i,
- &flags);
- pdata->vbus_pin[i] = gpio;
- if (!gpio_is_valid(gpio))
- continue;
- pdata->vbus_pin_active_low[i] = flags & OF_GPIO_ACTIVE_LOW;
-
- ret = gpio_request(gpio, "ohci_vbus");
- if (ret) {
- dev_err(&pdev->dev,
- "can't request vbus gpio %d\n", gpio);
- continue;
- }
- ret = gpio_direction_output(gpio,
- !pdata->vbus_pin_active_low[i]);
- if (ret) {
- dev_err(&pdev->dev,
- "can't put vbus gpio %d as output %d\n",
- gpio, !pdata->vbus_pin_active_low[i]);
- gpio_free(gpio);
- continue;
- }
+ pdata->vbus_pin_active_low[i] = gpiod_get_value(pdata->vbus_pin[i]);
ohci_at91_usb_set_power(pdata, i, 1);
}
@@ -580,37 +548,21 @@ static int ohci_hcd_at91_drv_probe(struct platform_device *pdev)
break;
pdata->overcurrent_pin[i] =
- of_get_named_gpio_flags(np, "atmel,oc-gpio", i, &flags);
-
- if (!gpio_is_valid(pdata->overcurrent_pin[i]))
- continue;
- gpio = pdata->overcurrent_pin[i];
-
- ret = gpio_request(gpio, "ohci_overcurrent");
- if (ret) {
- dev_err(&pdev->dev,
- "can't request overcurrent gpio %d\n",
- gpio);
+ devm_gpiod_get_optional(&pdev->dev,
+ "atmel,oc-gpio", GPIOD_IN);
+ if (IS_ERR(pdata->overcurrent_pin[i])) {
+ err = PTR_ERR(pdata->overcurrent_pin[i]);
+ dev_err(&pdev->dev, "unable to claim gpio \"overcurrent\": %d\n", err);
continue;
}
- ret = gpio_direction_input(gpio);
- if (ret) {
- dev_err(&pdev->dev,
- "can't configure overcurrent gpio %d as input\n",
- gpio);
- gpio_free(gpio);
- continue;
- }
-
- ret = request_irq(gpio_to_irq(gpio),
- ohci_hcd_at91_overcurrent_irq,
- IRQF_SHARED, "ohci_overcurrent", pdev);
- if (ret) {
- gpio_free(gpio);
- dev_err(&pdev->dev,
- "can't get gpio IRQ for overcurrent\n");
- }
+ ret = devm_request_irq(&pdev->dev,
+ gpiod_to_irq(pdata->overcurrent_pin[i]),
+ ohci_hcd_at91_overcurrent_irq,
+ IRQF_SHARED,
+ "ohci_overcurrent", pdev);
+ if (ret)
+ dev_info(&pdev->dev, "failed to request gpio \"overcurrent\" IRQ\n");
}
device_init_wakeup(&pdev->dev, 1);
@@ -623,19 +575,8 @@ static int ohci_hcd_at91_drv_remove(struct platform_device *pdev)
int i;
if (pdata) {
- at91_for_each_port(i) {
- if (!gpio_is_valid(pdata->vbus_pin[i]))
- continue;
+ at91_for_each_port(i)
ohci_at91_usb_set_power(pdata, i, 0);
- gpio_free(pdata->vbus_pin[i]);
- }
-
- at91_for_each_port(i) {
- if (!gpio_is_valid(pdata->overcurrent_pin[i]))
- continue;
- free_irq(gpio_to_irq(pdata->overcurrent_pin[i]), pdev);
- gpio_free(pdata->overcurrent_pin[i]);
- }
}
device_init_wakeup(&pdev->dev, 0);