summaryrefslogtreecommitdiff
path: root/drivers/usb/host/ohci-da8xx.c
diff options
context:
space:
mode:
authorBartosz Golaszewski <bgolaszewski@baylibre.com>2019-04-12 15:36:37 +0300
committerSekhar Nori <nsekhar@ti.com>2019-04-12 17:15:52 +0300
commitd327330185f192411be80563a3c8398f4538cdb2 (patch)
treed631cb45bc97e7ca0354d734c38270701d4a9e6a /drivers/usb/host/ohci-da8xx.c
parent8e2f5eae24351d6f536c602eccdc4ad12b675c28 (diff)
downloadlinux-d327330185f192411be80563a3c8398f4538cdb2.tar.xz
usb: ohci-da8xx: disable the regulator if the overcurrent irq fired
Historically the power supply management in this driver has been handled in two separate places in parallel. Device-tree users simply defined an appropriate regulator, while two boards with no DT support (da830-evm and omapl138-hawk) passed functions defined in their respective board files over platform data. These functions simply used legacy GPIO calls to watch the oc GPIO for interrupts and disable the vbus GPIO when the irq fires. Commit d193abf1c913 ("usb: ohci-da8xx: add vbus and overcurrent gpios") updated these GPIO calls to the modern API and moved them inside the driver. This however is not the optimal solution for the vbus GPIO which should be modeled as a fixed regulator that can be controlled with a GPIO. In order to keep the overcurrent protection available once we move the board files to using fixed regulators we need to disable the enable_reg regulator when the overcurrent indicator interrupt fires. Since we cannot call regulator_disable() from interrupt context, we need to switch to using a oneshot threaded interrupt. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Diffstat (limited to 'drivers/usb/host/ohci-da8xx.c')
-rw-r--r--drivers/usb/host/ohci-da8xx.c22
1 files changed, 17 insertions, 5 deletions
diff --git a/drivers/usb/host/ohci-da8xx.c b/drivers/usb/host/ohci-da8xx.c
index 209a262b5565..f69b339d45e5 100644
--- a/drivers/usb/host/ohci-da8xx.c
+++ b/drivers/usb/host/ohci-da8xx.c
@@ -202,12 +202,23 @@ static int ohci_da8xx_regulator_event(struct notifier_block *nb,
return 0;
}
-static irqreturn_t ohci_da8xx_oc_handler(int irq, void *data)
+static irqreturn_t ohci_da8xx_oc_thread(int irq, void *data)
{
struct da8xx_ohci_hcd *da8xx_ohci = data;
+ struct device *dev = da8xx_ohci->hcd->self.controller;
+ int ret;
- if (gpiod_get_value(da8xx_ohci->oc_gpio))
- gpiod_set_value(da8xx_ohci->vbus_gpio, 0);
+ if (gpiod_get_value_cansleep(da8xx_ohci->oc_gpio)) {
+ if (da8xx_ohci->vbus_gpio) {
+ gpiod_set_value_cansleep(da8xx_ohci->vbus_gpio, 0);
+ } else if (da8xx_ohci->vbus_reg) {
+ ret = regulator_disable(da8xx_ohci->vbus_reg);
+ if (ret)
+ dev_err(dev,
+ "Failed to disable regulator: %d\n",
+ ret);
+ }
+ }
return IRQ_HANDLED;
}
@@ -434,8 +445,9 @@ static int ohci_da8xx_probe(struct platform_device *pdev)
if (oc_irq < 0)
goto err;
- error = devm_request_irq(dev, oc_irq, ohci_da8xx_oc_handler,
- IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ error = devm_request_threaded_irq(dev, oc_irq, NULL,
+ ohci_da8xx_oc_thread, IRQF_TRIGGER_RISING |
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
"OHCI over-current indicator", da8xx_ohci);
if (error)
goto err;