summaryrefslogtreecommitdiff
path: root/drivers/usb/host/uhci-hcd.c
diff options
context:
space:
mode:
authorAlan Stern <stern@rowland.harvard.edu>2010-06-25 22:02:49 +0400
committerGreg Kroah-Hartman <gregkh@suse.de>2010-08-11 01:35:38 +0400
commit0d436b425e07f9e4b0fe571cec061f5d136f1d8b (patch)
treef1ebf7929aaf1b4b5e96e1182085e8924e2d0d50 /drivers/usb/host/uhci-hcd.c
parentff2f07874362d34684296f2bd5547a099f33c6d4 (diff)
downloadlinux-0d436b425e07f9e4b0fe571cec061f5d136f1d8b.tar.xz
USB: UHCI: add support for Intel's wakeup flags
This patch (as1396) adds code to uhci-hcd to support the vendor-specific wakeup settings found in Intel's ICHx hardware. A couple of unnecessary memory barriers are removed. And the root hub isn't put back into the "suspended" state if power was lost during a system sleep -- there's not much point in doing so because the root hub will be resumed shortly. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers/usb/host/uhci-hcd.c')
-rw-r--r--drivers/usb/host/uhci-hcd.c30
1 files changed, 17 insertions, 13 deletions
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index 9d4d81248f96..b04506036b64 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -176,6 +176,8 @@ static void check_and_reset_hc(struct uhci_hcd *uhci)
*/
static void configure_hc(struct uhci_hcd *uhci)
{
+ struct pci_dev *pdev = to_pci_dev(uhci_dev(uhci));
+
/* Set the frame length to the default: 1 ms exactly */
outb(USBSOF_DEFAULT, uhci->io_addr + USBSOF);
@@ -191,8 +193,11 @@ static void configure_hc(struct uhci_hcd *uhci)
mb();
/* Enable PIRQ */
- pci_write_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP,
- USBLEGSUP_DEFAULT);
+ pci_write_config_word(pdev, USBLEGSUP, USBLEGSUP_DEFAULT);
+
+ /* Disable platform-specific non-PME# wakeup */
+ if (pdev->vendor == PCI_VENDOR_ID_INTEL)
+ pci_write_config_byte(pdev, USBRES_INTEL, 0);
}
@@ -791,6 +796,7 @@ static int uhci_rh_resume(struct usb_hcd *hcd)
static int uhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
{
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
+ struct pci_dev *pdev = to_pci_dev(uhci_dev(uhci));
int rc = 0;
dev_dbg(uhci_dev(uhci), "%s\n", __func__);
@@ -808,11 +814,15 @@ static int uhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
/* All PCI host controllers are required to disable IRQ generation
* at the source, so we must turn off PIRQ.
*/
- pci_write_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP, 0);
- mb();
+ pci_write_config_word(pdev, USBLEGSUP, 0);
clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
- /* FIXME: Enable non-PME# remote wakeup? */
+ /* Enable platform-specific non-PME# wakeup */
+ if (do_wakeup) {
+ if (pdev->vendor == PCI_VENDOR_ID_INTEL)
+ pci_write_config_byte(pdev, USBRES_INTEL,
+ USBPORT1EN | USBPORT2EN);
+ }
done_okay:
clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
@@ -831,7 +841,6 @@ static int uhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
* even if the controller was dead.
*/
set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
- mb();
spin_lock_irq(&uhci->lock);
@@ -839,8 +848,6 @@ static int uhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
if (hibernated)
uhci_hc_died(uhci);
- /* FIXME: Disable non-PME# remote wakeup? */
-
/* The firmware or a boot kernel may have changed the controller
* settings during a system wakeup. Check it and reconfigure
* to avoid problems.
@@ -850,12 +857,9 @@ static int uhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
/* If the controller was dead before, it's back alive now */
configure_hc(uhci);
- if (uhci->rh_state == UHCI_RH_RESET) {
-
- /* The controller had to be reset */
+ /* Tell the core if the controller had to be reset */
+ if (uhci->rh_state == UHCI_RH_RESET)
usb_root_hub_lost_power(hcd->self.root_hub);
- suspend_rh(uhci, UHCI_RH_SUSPENDED);
- }
spin_unlock_irq(&uhci->lock);