Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC platform updates from Olof Johansson:
 "SoC changes, a substantial part of this is cleanup of some of the
  older platforms that used to have a bunch of board files.

  In particular:

   - Remove non-DT i.MX platforms that haven't seen activity in years,
     it's time to remove them.

   - A bunch of cleanup and removal of platform data for TI/OMAP
     platforms, moving over to genpd for power/reset control (yay!)

   - Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them
     closer to multiplatform support (not quite there yet, but getting
     close).

  There are a few other changes too, smaller fixlets, etc. For new
  platform support, the primary ones are:

   - New SoC: Hisilicon SD5203, ARM926EJ-S platform.

   - Cpufreq support for i.MX7ULP"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits)
  ARM: mstar: Select MStar intc
  ARM: stm32: Replace HTTP links with HTTPS ones
  ARM: debug: add UART early console support for SD5203
  ARM: hisi: add support for SD5203 SoC
  ARM: omap3: enable off mode automatically
  clk: imx: imx35: Remove mx35_clocks_init()
  clk: imx: imx31: Remove mx31_clocks_init()
  clk: imx: imx27: Remove mx27_clocks_init()
  ARM: imx: Remove unused definitions
  ARM: imx35: Retrieve the IIM base address from devicetree
  ARM: imx3: Retrieve the AVIC base address from devicetree
  ARM: imx3: Retrieve the CCM base address from devicetree
  ARM: imx31: Retrieve the IIM base address from devicetree
  ARM: imx27: Retrieve the CCM base address from devicetree
  ARM: imx27: Retrieve the SYSCTRL base address from devicetree
  ARM: s3c64xx: bring back notes from removed debug-macro.S
  ARM: s3c24xx: fix Wunused-variable warning on !MMU
  ARM: samsung: fix PM debug build with DEBUG_LL but !MMU
  MAINTAINERS: mark linux-samsung-soc list non-moderated
  ARM: imx: Remove remnant board file support pieces
  ...

1 files changed, 9 insertions, 7 deletions

diff --git a/drivers/video/fbdev/s3c2410fb.c b/drivers/video/fbdev/s3c2410fb.c
index 6f8fa501583f..d8ae5258de46 100644
--- a/drivers/video/fbdev/s3c2410fb.c
+++ b/drivers/video/fbdev/s3c2410fb.c
@@ -29,19 +29,18 @@
 #include <linux/clk.h>
 #include <linux/cpufreq.h>
 #include <linux/io.h>
+#include <linux/platform_data/fb-s3c2410.h>
 
 #include <asm/div64.h>
 
 #include <asm/mach/map.h>
-#include <mach/regs-lcd.h>
-#include <mach/regs-gpio.h>
-#include <mach/fb.h>
 
 #ifdef CONFIG_PM
 #include <linux/pm.h>
 #endif
 
 #include "s3c2410fb.h"
+#include "s3c2410fb-regs-lcd.h"
 
 /* Debugging stuff */
 static int debug = IS_BUILTIN(CONFIG_FB_S3C2410_DEBUG);
@@ -672,6 +671,9 @@ static inline void modify_gpio(void __iomem *reg,
 {
 	unsigned long tmp;
 
+	if (!reg)
+		return;
+
 	tmp = readl(reg) & ~mask;
 	writel(tmp | set, reg);
 }
@@ -702,10 +704,10 @@ static int s3c2410fb_init_registers(struct fb_info *info)
 
 	/* modify the gpio(s) with interrupts set (bjd) */
 
-	modify_gpio(S3C2410_GPCUP,  mach_info->gpcup,  mach_info->gpcup_mask);
-	modify_gpio(S3C2410_GPCCON, mach_info->gpccon, mach_info->gpccon_mask);
-	modify_gpio(S3C2410_GPDUP,  mach_info->gpdup,  mach_info->gpdup_mask);
-	modify_gpio(S3C2410_GPDCON, mach_info->gpdcon, mach_info->gpdcon_mask);
+	modify_gpio(mach_info->gpcup_reg,  mach_info->gpcup,  mach_info->gpcup_mask);
+	modify_gpio(mach_info->gpccon_reg, mach_info->gpccon, mach_info->gpccon_mask);
+	modify_gpio(mach_info->gpdup_reg,  mach_info->gpdup,  mach_info->gpdup_mask);
+	modify_gpio(mach_info->gpdcon_reg, mach_info->gpdcon, mach_info->gpdcon_mask);
 
 	local_irq_restore(flags);